summaryrefslogtreecommitdiffabout
path: root/gammu/emb/cfg
Unidiff
Diffstat (limited to 'gammu/emb/cfg') (more/less context) (ignore whitespace changes)
-rw-r--r--gammu/emb/cfg/config.h172
1 files changed, 172 insertions, 0 deletions
diff --git a/gammu/emb/cfg/config.h b/gammu/emb/cfg/config.h
new file mode 100644
index 0000000..96de549
--- a/dev/null
+++ b/gammu/emb/cfg/config.h
@@ -0,0 +1,172 @@
1/* config.h. Generated by configure. */
2
3#ifndef _config_h_
4#define _config_h_
5
6/* -------------------------- Gammu specific ---------------------------- */
7
8/* Version of package */
9#define VERSION "0.97.0"
10#define VERSION_WIN "0,97,0,0"
11
12#ifndef _MSC_VER
13/* Define if want DEBUG info */
14/* #undef DEBUG */
15#endif
16
17/* #undef ENABLE_LGPL */
18
19/* ---------------------- Connections ---------------------------------- */
20
21/* MBUS2 over cable */
22#define GSM_ENABLE_MBUS2 1
23
24/* FBUS2 over cable */
25#define GSM_ENABLE_FBUS2 1
26/* FBUS2 to use with DLR3 cable (init done using AT commands) */
27#define GSM_ENABLE_FBUS2DLR3 1
28/* FBUS2 to use with DKU5 cable (init done using AT commands) */
29#define GSM_ENABLE_FBUS2DKU5 1
30/* FBUS2 to use with cable with PL2303 chip (init done using AT commands) */
31#define GSM_ENABLE_FBUS2PL2303 1
32/* FBUS2 to use with bluetooth legacy device (init done using AT commands) */
33#define GSM_ENABLE_FBUS2BLUE 1
34/* FBUS2 to use with direct infrared device */
35#define GSM_ENABLE_FBUS2IRDA 1
36
37/* PHONET FBUS to use with bluetooth legacy device */
38#define GSM_ENABLE_PHONETBLUE 1
39
40/* Symbian with m-router (TCPIP based) to use with bluetooth legacy device */
41#define GSM_ENABLE_MROUTERBLUE 1
42
43/* AT protocol */
44#define GSM_ENABLE_AT 1
45
46/* Alcatel protocol */
47#define GSM_ENABLE_ALCABUS 1
48
49/* Infrared. PHONET FBUS */
50#define GSM_ENABLE_IRDAPHONET 1
51/* Infrared. AT commands */
52#define GSM_ENABLE_IRDAAT 1
53/* Infrared. OBEX */
54#define GSM_ENABLE_IRDAOBEX 1
55
56#ifdef WIN32
57# define GSM_ENABLE_BLUEFBUS2 1
58# define GSM_ENABLE_BLUEPHONET 1
59# define GSM_ENABLE_BLUEAT 1
60# define GSM_ENABLE_BLUEOBEX 1
61#else
62/* Bluetooth stack (like Bluez). FBUS2 (init done using AT commands) */
63# define GSM_ENABLE_BLUEFBUS2 1
64/* Bluetooth stack (like Bluez). PHONET FBUS */
65# define GSM_ENABLE_BLUEPHONET 1
66/* Blueooth stack (like Bluez). AT commands */
67# define GSM_ENABLE_BLUEAT 1
68/* Blueooth stack (like Bluez). OBEX */
69# define GSM_ENABLE_BLUEOBEX 1
70#endif
71
72/* --------------------------- Phone modules (specific) ----------------- */
73
74/* n3320.c models */
75#define GSM_ENABLE_NOKIA3320 1
76/* n6110.c models */
77#define GSM_ENABLE_NOKIA6110 1
78
79/* n7110.c models */
80#define GSM_ENABLE_NOKIA7110 1
81/* n9210.c models */
82#define GSM_ENABLE_NOKIA9210 1
83/* It allows to show incoming call and SMS info for 7110 family phones.
84 * By default commented: you can have some problems, when using it.
85 * Example: with my 6210 after using it info about incoming sms is shown much
86 * earlier than sms in phone and phone restart (once and random) later after
87 * connection. Seems phone firmware isn't too good here
88 */
89/* Show incoming Data for 7110/9210 */
90/* #undef GSM_ENABLE_N71_92INCOMINGINFO */
91
92/* n6510.c (DCT4) models */
93#define GSM_ENABLE_NOKIA6510 1
94/* Force using 6210 frames for calendar. Required by some older DCT4 */
95/* #undef GSM_FORCE_DCT4_CALENDAR_6210 */
96
97/* n3650.c (DCT4 with Symbian) models */
98#define GSM_ENABLE_NOKIA3650 1
99
100/* AT generic models */
101#define GSM_ENABLE_ATGEN 1
102
103/* Alcatel BE5 */
104#define GSM_ENABLE_ALCATEL 1
105
106/* OBEX generic models */
107#define GSM_ENABLE_OBEXGEN 1
108
109/* Symbian with m-router generic models */
110#define GSM_ENABLE_MROUTERGEN 1
111
112/* ---------------------- General settings -------------------------------- */
113
114/* By default commented: some people reported me (for example, with 6210
115 * and 3210), that their phones doesn't answer at all sometimes or answer
116 * with (too) long delay. Possible reason: firmware in phone is too slow
117 * I didn't have such problems personally with phone and PC with Celeron 800
118 * Please also note, that CB function was always TO CHECK in MyGnokii/Gnokii
119 * too.
120 */
121/* Enables cell broadcast */
122/* #undef GSM_ENABLE_CELLBROADCAST */
123
124/* If you want backup/restore stuff. Some people wanted it - they required
125 * smalled library made from Gammu and didn't require it. Please note,
126 * that backup/restore stuff can be easy separated from other things.
127 */
128#define GSM_ENABLE_BACKUP 1
129
130/* Bu default commented: some parts of source are not ready or not tested
131 * at all (or aren't good tested). Uncomment, if want them
132 */
133//#define DEVELOP
134
135/* By default disabled. It allows to making short beep after such things
136 * like changing logo in phone (like in Logo Manager)
137 */
138//#define GSM_ENABLE_BEEP
139
140/* ---------------------- C language specific --------------------------- */
141
142#ifndef WIN32
143/* are the scandir functions available */
144# define HAVE_DIRENT_H 1
145# define HAVE_SCANDIR 1
146# define HAVE_ALPHASORT 1
147
148# define HAVE_PTHREAD 1
149# define HAVE_SYS_IOCTL_H 1
150# define HAVE_MYSQL_MYSQL_H 1
151#endif
152
153#define HAVE_ISWSPACE 1
154#define HAVE_TOWLOWER 1
155
156#ifndef WIN32
157/* Will be used Bluez BT stack ? */
158# define GSM_ENABLE_BLUEZ 1
159/* Will be used Affix BT stack ? */
160/* # undef GSM_ENABLE_AFFIX */
161#endif
162
163/* Uncomment, if you want searching RF channel during each BT connection */
164/* It can make connecting longer or connection less stable */
165/* With MS VC and MS BT stack required irprops.lib from MS Platform SDK to compile */
166#ifndef WIN32
167# define BLUETOOTH_RF_SEARCHING 1
168#else
169//# define BLUETOOTH_RF_SEARCHING 1
170#endif
171
172#endif