summaryrefslogtreecommitdiffabout
path: root/gammu/emb/cfg
Side-by-side diff
Diffstat (limited to 'gammu/emb/cfg') (more/less context) (ignore whitespace changes)
-rw-r--r--gammu/emb/cfg/config.h172
1 files changed, 172 insertions, 0 deletions
diff --git a/gammu/emb/cfg/config.h b/gammu/emb/cfg/config.h
new file mode 100644
index 0000000..96de549
--- a/dev/null
+++ b/gammu/emb/cfg/config.h
@@ -0,0 +1,172 @@
+/* config.h. Generated by configure. */
+
+#ifndef _config_h_
+#define _config_h_
+
+/* -------------------------- Gammu specific ---------------------------- */
+
+/* Version of package */
+#define VERSION "0.97.0"
+#define VERSION_WIN "0,97,0,0"
+
+#ifndef _MSC_VER
+/* Define if want DEBUG info */
+/* #undef DEBUG */
+#endif
+
+/* #undef ENABLE_LGPL */
+
+/* ---------------------- Connections ---------------------------------- */
+
+/* MBUS2 over cable */
+#define GSM_ENABLE_MBUS2 1
+
+/* FBUS2 over cable */
+#define GSM_ENABLE_FBUS2 1
+/* FBUS2 to use with DLR3 cable (init done using AT commands) */
+#define GSM_ENABLE_FBUS2DLR3 1
+/* FBUS2 to use with DKU5 cable (init done using AT commands) */
+#define GSM_ENABLE_FBUS2DKU5 1
+/* FBUS2 to use with cable with PL2303 chip (init done using AT commands) */
+#define GSM_ENABLE_FBUS2PL2303 1
+/* FBUS2 to use with bluetooth legacy device (init done using AT commands) */
+#define GSM_ENABLE_FBUS2BLUE 1
+/* FBUS2 to use with direct infrared device */
+#define GSM_ENABLE_FBUS2IRDA 1
+
+/* PHONET FBUS to use with bluetooth legacy device */
+#define GSM_ENABLE_PHONETBLUE 1
+
+/* Symbian with m-router (TCPIP based) to use with bluetooth legacy device */
+#define GSM_ENABLE_MROUTERBLUE 1
+
+/* AT protocol */
+#define GSM_ENABLE_AT 1
+
+/* Alcatel protocol */
+#define GSM_ENABLE_ALCABUS 1
+
+/* Infrared. PHONET FBUS */
+#define GSM_ENABLE_IRDAPHONET 1
+/* Infrared. AT commands */
+#define GSM_ENABLE_IRDAAT 1
+/* Infrared. OBEX */
+#define GSM_ENABLE_IRDAOBEX 1
+
+#ifdef WIN32
+# define GSM_ENABLE_BLUEFBUS2 1
+# define GSM_ENABLE_BLUEPHONET 1
+# define GSM_ENABLE_BLUEAT 1
+# define GSM_ENABLE_BLUEOBEX 1
+#else
+/* Bluetooth stack (like Bluez). FBUS2 (init done using AT commands) */
+# define GSM_ENABLE_BLUEFBUS2 1
+/* Bluetooth stack (like Bluez). PHONET FBUS */
+# define GSM_ENABLE_BLUEPHONET 1
+/* Blueooth stack (like Bluez). AT commands */
+# define GSM_ENABLE_BLUEAT 1
+/* Blueooth stack (like Bluez). OBEX */
+# define GSM_ENABLE_BLUEOBEX 1
+#endif
+
+/* --------------------------- Phone modules (specific) ----------------- */
+
+/* n3320.c models */
+#define GSM_ENABLE_NOKIA3320 1
+/* n6110.c models */
+#define GSM_ENABLE_NOKIA6110 1
+
+/* n7110.c models */
+#define GSM_ENABLE_NOKIA7110 1
+/* n9210.c models */
+#define GSM_ENABLE_NOKIA9210 1
+/* It allows to show incoming call and SMS info for 7110 family phones.
+ * By default commented: you can have some problems, when using it.
+ * Example: with my 6210 after using it info about incoming sms is shown much
+ * earlier than sms in phone and phone restart (once and random) later after
+ * connection. Seems phone firmware isn't too good here
+ */
+/* Show incoming Data for 7110/9210 */
+/* #undef GSM_ENABLE_N71_92INCOMINGINFO */
+
+/* n6510.c (DCT4) models */
+#define GSM_ENABLE_NOKIA6510 1
+/* Force using 6210 frames for calendar. Required by some older DCT4 */
+/* #undef GSM_FORCE_DCT4_CALENDAR_6210 */
+
+/* n3650.c (DCT4 with Symbian) models */
+#define GSM_ENABLE_NOKIA3650 1
+
+/* AT generic models */
+#define GSM_ENABLE_ATGEN 1
+
+/* Alcatel BE5 */
+#define GSM_ENABLE_ALCATEL 1
+
+/* OBEX generic models */
+#define GSM_ENABLE_OBEXGEN 1
+
+/* Symbian with m-router generic models */
+#define GSM_ENABLE_MROUTERGEN 1
+
+/* ---------------------- General settings -------------------------------- */
+
+/* By default commented: some people reported me (for example, with 6210
+ * and 3210), that their phones doesn't answer at all sometimes or answer
+ * with (too) long delay. Possible reason: firmware in phone is too slow
+ * I didn't have such problems personally with phone and PC with Celeron 800
+ * Please also note, that CB function was always TO CHECK in MyGnokii/Gnokii
+ * too.
+ */
+/* Enables cell broadcast */
+/* #undef GSM_ENABLE_CELLBROADCAST */
+
+/* If you want backup/restore stuff. Some people wanted it - they required
+ * smalled library made from Gammu and didn't require it. Please note,
+ * that backup/restore stuff can be easy separated from other things.
+ */
+#define GSM_ENABLE_BACKUP 1
+
+/* Bu default commented: some parts of source are not ready or not tested
+ * at all (or aren't good tested). Uncomment, if want them
+ */
+//#define DEVELOP
+
+/* By default disabled. It allows to making short beep after such things
+ * like changing logo in phone (like in Logo Manager)
+ */
+//#define GSM_ENABLE_BEEP
+
+/* ---------------------- C language specific --------------------------- */
+
+#ifndef WIN32
+/* are the scandir functions available */
+# define HAVE_DIRENT_H 1
+# define HAVE_SCANDIR 1
+# define HAVE_ALPHASORT 1
+
+# define HAVE_PTHREAD 1
+# define HAVE_SYS_IOCTL_H 1
+# define HAVE_MYSQL_MYSQL_H 1
+#endif
+
+#define HAVE_ISWSPACE 1
+#define HAVE_TOWLOWER 1
+
+#ifndef WIN32
+/* Will be used Bluez BT stack ? */
+# define GSM_ENABLE_BLUEZ 1
+/* Will be used Affix BT stack ? */
+/* # undef GSM_ENABLE_AFFIX */
+#endif
+
+/* Uncomment, if you want searching RF channel during each BT connection */
+/* It can make connecting longer or connection less stable */
+/* With MS VC and MS BT stack required irprops.lib from MS Platform SDK to compile */
+#ifndef WIN32
+# define BLUETOOTH_RF_SEARCHING 1
+#else
+//# define BLUETOOTH_RF_SEARCHING 1
+#endif
+
+#endif