| -rw-r--r-- | microkde/kdeui/kcmodule.cpp | 10 | ||||
| -rw-r--r-- | microkde/kdeui/kcmodule.h | 11 | ||||
| -rw-r--r-- | microkde/kutils/kcmultidialog.cpp | 13 | ||||
| -rw-r--r-- | microkde/kutils/kcmultidialog.h | 5 |
4 files changed, 22 insertions, 17 deletions
diff --git a/microkde/kdeui/kcmodule.cpp b/microkde/kdeui/kcmodule.cpp index 915cd0f..f646db3 100644 --- a/microkde/kdeui/kcmodule.cpp +++ b/microkde/kdeui/kcmodule.cpp @@ -24,32 +24,34 @@ //US#include <kinstance.h> #include <kglobal.h> #include <klocale.h> #include <kdebug.h> class KCModulePrivate { public: //US KInstance *_instance; QString _rootOnlyMsg; bool _useRootOnlyMsg; bool _hasOwnInstance; + KPrefs* _prefs; }; -KCModule::KCModule(QWidget *parent, const char *name, const QStringList &) +KCModule::KCModule(KPrefs* prefs, QWidget *parent, const char *name, const QStringList &) : QWidget(parent, name), _btn(Help|Default|Apply) { kdDebug() << "KCModule " << name << endl; d = new KCModulePrivate; d->_useRootOnlyMsg = true; + d->_prefs = prefs; /*US d->_instance = new KInstance(name); if (name && strlen(name)) { d->_instance = new KInstance(name); KGlobal::locale()->insertCatalogue(name); } else d->_instance = new KInstance("kcmunnamed"); */ d->_hasOwnInstance = true; //US KGlobal::setActiveInstance(this->instance()); } @@ -85,22 +87,28 @@ QString KCModule::rootOnlyMsg() const return d->_rootOnlyMsg; } void KCModule::setUseRootOnlyMsg(bool on) { d->_useRootOnlyMsg = on; } bool KCModule::useRootOnlyMsg() const { return d->_useRootOnlyMsg; } + +KPrefs* KCModule::getPreferences() +{ + return d->_prefs; +} + /*US KInstance *KCModule::instance() const { return d->_instance; } */ void KCModule::virtual_hook( int, void* ) { /*BASE::virtual_hook( id, data );*/ } //US #include "kcmodule.moc" diff --git a/microkde/kdeui/kcmodule.h b/microkde/kdeui/kcmodule.h index bc020bc..874958c 100644 --- a/microkde/kdeui/kcmodule.h +++ b/microkde/kdeui/kcmodule.h @@ -74,79 +74,79 @@ public: */ enum Button {Help=1, Default=2, Apply=16, Reset=4, /* obsolete, do not use! */ Cancel=8, /* obsolete, do not use! */ Ok=32, /* obsolete, do not use! */ SysDefault=64 /* obsolete, do not use! */ }; /* * Base class for all KControlModules. * Make sure you have a QStringList argument in your * implementation. */ - KCModule(QWidget *parent=0, const char *name=0, const QStringList &args=QStringList() ); + KCModule(KPrefs* prefs, QWidget *parent=0, const char *name=0, const QStringList &args=QStringList() ); //US KCModule(KInstance *instance, QWidget *parent=0, const QStringList &args=QStringList() ); /* * Destroys the module. */ ~KCModule(); /** * Load the configuration data into the module. * * The load method sets the user interface elements of the * module to reflect the current settings stored in the * configuration files. * * This method is invoked whenever the module should read its configuration * (most of the times from a config file) and update the user interface. * This happens when the user clicks the "Reset" button in the control * center, to undo all of his changes and restore the currently valid * settings. NOTE that this is not called after the modules is loaded, * so you probably want to call this method in the constructor. */ - virtual void load(KPrefs* prefs) {}; + virtual void load() {}; /** * Save the configuration data. * * The save method stores the config information as shown * in the user interface in the config files. * * If necessary, this method also updates the running system, * e.g. by restarting applications. * * save is called when the user clicks "Apply" or "Ok". */ - virtual void save(KPrefs* prefs) {}; + virtual void save() {}; /** * Sets the configuration to sensible default values. * * This method is called when the user clicks the "Default" * button. It should set the display to useful values. */ - virtual void defaults(KPrefs* prefs) {}; + virtual void defaults() {}; /** * Set the configuration to system default values. * * This method is called when the user clicks the "System-Default" * button. It should set the display to the system default values. * * NOTE: The default behaviour is to call defaults(). */ - virtual void sysdefaults(KPrefs* prefs) { defaults(prefs); }; + virtual void sysdefaults() { defaults(); }; /** * Return a quick-help text. * * This method is called when the module is docked. * The quick-help text should contain a short description of the module and * links to the module's help files. You can use QML formating tags in the text. * * NOTE: Please make sure the quick help text gets translated (use i18n()). */ virtual QString quickHelp() const { return QString::null; }; @@ -184,24 +184,25 @@ public: /** * Tell if KControl should show a RootOnly message when run as * a normal user. * * In some cases, the module don't want a RootOnly message to * appear (for example if it has already one). This function * tells KControl if a RootOnly message should be shown * * @see KCModule::setUseRootOnlyMsg */ bool useRootOnlyMsg() const; + KPrefs* getPreferences(); //US KInstance *instance() const; signals: /** * Indicate that the state of the modules contents has changed. * * This signal is emitted whenever the state of the configuration * shown in the module changes. It allows the control center to * keep track of unsaved changes. * diff --git a/microkde/kutils/kcmultidialog.cpp b/microkde/kutils/kcmultidialog.cpp index c2378fb..6c82e4f 100644 --- a/microkde/kutils/kcmultidialog.cpp +++ b/microkde/kutils/kcmultidialog.cpp @@ -25,31 +25,30 @@ #include <qlayout.h> #include <klocale.h> #include <kglobal.h> #include <kdebug.h> #include <kiconloader.h> #include <kmessagebox.h> //US #include <klibloader.h> #include <krun.h> #include <kprocess.h> #include "kcmultidialog.h" -#include "kprefs.h" //US #include "kcmultidialog.moc" //US #include "kcmoduleloader.h" -KCMultiDialog::KCMultiDialog(KPrefs* prefs, const QString& baseGroup, QWidget *parent, const char *name, bool modal) +KCMultiDialog::KCMultiDialog(const QString& baseGroup, QWidget *parent, const char *name, bool modal) : KDialogBase(IconList, i18n("Configure"), Default |Cancel | Apply | Ok, Ok, - parent, name, modal, true), mPrefs(prefs), d(0L) + parent, name, modal, true), d(0L) { enableButton(Apply, false); //connect(this, SIGNAL(aboutToShowPage(QWidget *)), this, SLOT(slotAboutToShow(QWidget *))); connect( this, SIGNAL( defaultClicked() ), SLOT( slotDefault() ) ); _baseGroup = baseGroup; mMainWidget = new KJanusWidget( this, "JanusWidget", KJanusWidget::Tabbed ); setMainWidget(mMainWidget ); #ifdef DESKTOP_VERSION resize(640,480); #else @@ -66,53 +65,53 @@ KCMultiDialog::~KCMultiDialog() } void KCMultiDialog::slotDefault() { int curPageIndex = mMainWidget->activePageIndex(); QPtrListIterator<KCModule> it(modules); for (; it.current(); ++it) { if (pageIndex((QWidget *)(*it)->parent()) == curPageIndex) { - (*it)->defaults(mPrefs); + (*it)->defaults(); clientChanged(true); return; } } } void KCMultiDialog::slotApply() { qDebug("KCMultiDialog::slotApply clicked"); QPtrListIterator<KCModule> it(modules); for (; it.current(); ++it) - (*it)->save(mPrefs); + (*it)->save(); clientChanged(false); emit applyClicked(); } void KCMultiDialog::slotOk() { qDebug("KCMultiDialog::slotOk clicked"); QPtrListIterator<KCModule> it(modules); for (; it.current(); ++it) - (*it)->save(mPrefs); + (*it)->save(); accept(); emit okClicked(); } void KCMultiDialog::slotHelp() { /*US KURL url( KURL("help:/"), _docPath ); if (url.protocol() == "help" || url.protocol() == "man" || url.protocol() == "info") { KProcess process; @@ -153,25 +152,25 @@ QVBox * KCMultiDialog::getNewVBoxPage( const QString & modulename ) { QVBox *page = mMainWidget->addVBoxPage(modulename , QString::null,QPixmap() ); return page; } //US special method for microkde. We dop noty want to load everything dynamically. void KCMultiDialog::addModule(KCModule* module ) //, const QString& modulename, const QString& iconname) { modules.append(module); connect(module, SIGNAL(changed(bool)), this, SLOT(clientChanged(bool))); //US - module->load(mPrefs); + module->load(); } void KCMultiDialog::slotAboutToShow(QWidget *page) { /*US LoadInfo *loadInfo = moduleDict[page]; if (!loadInfo) return; QApplication::setOverrideCursor(Qt::WaitCursor); diff --git a/microkde/kutils/kcmultidialog.h b/microkde/kutils/kcmultidialog.h index a42555f..1aa66b2 100644 --- a/microkde/kutils/kcmultidialog.h +++ b/microkde/kutils/kcmultidialog.h @@ -20,50 +20,48 @@ */ #ifndef KCMULTIDIALOG_H #define KCMULTIDIALOG_H #include <qptrlist.h> #include <qptrdict.h> #include <kdialogbase.h> #include <kjanuswidget.h> #include <kcmodule.h> -class KPrefs; - /** * A class that offers a @ref KDialogBase containing arbitrary KControl Modules * * @short A method that offers a @ref KDialogBase containing arbitrary * KControl Modules. * * @author Matthias Elter <elter@kde.org>, Daniel Molkentin <molkentin@kde.org> * @since 3.2 */ class KCMultiDialog : public KDialogBase { Q_OBJECT public: /** * Constructs a new KCMultiDialog * * @param parent The parent Widget * @param name The widget name * @param baseGroup The baseGroup, if you want to call a module out of * kcontrol, just keep "settings" * @param modal If you pass true here, the dialog will be modal **/ - KCMultiDialog(KPrefs* prefs, const QString& baseGroup = QString::fromLatin1("settings"), + KCMultiDialog(const QString& baseGroup = QString::fromLatin1("settings"), QWidget *parent=0, const char *name=0, bool modal=false); /** * Destructor **/ virtual ~KCMultiDialog(); /** * Add a module. * * @param module Specify the name of the module that is to be added @@ -130,20 +128,19 @@ private: bool withfallback; }; */ QPtrList<KCModule> modules; /* QPtrDict<LoadInfo> moduleDict; QString _docPath; */ QString _baseGroup; //US KJanusWidget* mMainWidget; - KPrefs* mPrefs; // For future use class KCMultiDialogPrivate; KCMultiDialogPrivate *d; }; #endif //KCMULTIDIALOG_H |