| -rw-r--r-- | libkdepim/ksyncmanager.cpp | 2 | ||||
| -rw-r--r-- | libkdepim/ksyncprefsdialog.cpp | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/libkdepim/ksyncmanager.cpp b/libkdepim/ksyncmanager.cpp index fa7804e..0109c02 100644 --- a/libkdepim/ksyncmanager.cpp +++ b/libkdepim/ksyncmanager.cpp @@ -1055,257 +1055,257 @@ bool KSyncManager::syncExternalApplication(QString resource) return syncOK; } void KSyncManager::syncPhone() { syncExternalApplication("phone"); } void KSyncManager::showProgressBar(int percentage, QString caption, int total) { if (!bar->isVisible()) { int w = 300; if ( QApplication::desktop()->width() < 320 ) w = 220; int h = bar->sizeHint().height() ; int dw = QApplication::desktop()->width(); int dh = QApplication::desktop()->height(); bar->setGeometry( (dw-w)/2, (dh - h )/2 ,w,h ); bar->setCaption (caption); bar->setTotalSteps ( total ) ; bar->show(); } bar->raise(); bar->setProgress( percentage ); qApp->processEvents(); } void KSyncManager::hideProgressBar() { bar->hide(); qApp->processEvents(); } bool KSyncManager::isProgressBarCanceled() { return !bar->isVisible(); } QString KSyncManager::syncFileName() { QString fn = "tempfile"; switch(mTargetApp) { case (KAPI): fn = "tempsyncab.vcf"; break; case (KOPI): fn = "tempsynccal.ics"; break; case (PWMPI): fn = "tempsyncpw.pwm"; break; default: break; } #ifdef DESKTOP_VERSION return locateLocal( "tmp", fn ); #else return (QString( "/tmp/" )+ fn ); #endif } void KSyncManager::syncPi() { mIsKapiFile = true; mPisyncFinished = false; qApp->processEvents(); if ( mAskForPreferences ) if ( !edit_pisync_options()) { mParent->topLevelWidget()->setCaption( i18n("Syncing aborted. Nothing synced.") ); mPisyncFinished = true; return; } bool ok; Q_UINT16 port = mActiveSyncPort.toUInt(&ok); if ( ! ok ) { mParent->topLevelWidget()->setCaption( i18n("Sorry, no valid port.Syncing cancelled.") ); mPisyncFinished = true; return; } mCurrentResourceLocal = ""; mCurrentResourceRemote = ""; if ( mSpecificResources.count() ) { int lastSyncRes = mSpecificResources.count()/2; int ccc = mSpecificResources.count()-1; while ( lastSyncRes > 0 && ccc > 0 && mSpecificResources[ ccc ].isEmpty() ) { --ccc; --lastSyncRes; //qDebug ( "KSM: sync pi %d",ccc ); } int startLocal = 0; int startRemote = mSpecificResources.count()/2; emit multiResourceSyncStart( true ); while ( startLocal < mSpecificResources.count()/2 ) { if ( startLocal+1 >= lastSyncRes ) emit multiResourceSyncStart( false ); mPisyncFinished = false; mCurrentResourceLocal = mSpecificResources[ startLocal ]; mCurrentResourceRemote = mSpecificResources[ startRemote ]; //qDebug ( "KSM: AAASyncing resources: Local: %s --- Remote: %s ",mCurrentResourceLocal.latin1(), mCurrentResourceRemote.latin1() ); if ( !mCurrentResourceRemote.isEmpty() ) { qDebug ( "KSM: Syncing resources: Local: %s --- Remote: %s ",mCurrentResourceLocal.latin1(), mCurrentResourceRemote.latin1() ); KCommandSocket* commandSocket = new KCommandSocket( mCurrentResourceRemote, mPassWordPiSync, port, mActiveSyncIP, this, mParent->topLevelWidget() ); connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int )), this, SLOT(deleteCommandSocket(KCommandSocket*, int)) ); commandSocket->readFile( syncFileName() ); mParent->topLevelWidget()->setCaption( i18n("Syncing %1 <-> %2").arg( mCurrentResourceLocal ).arg( mCurrentResourceRemote ) ); while ( !mPisyncFinished ) { //qDebug("waiting "); qApp->processEvents(); } if ( startLocal+1 < mSpecificResources.count()/2 ) { mParent->topLevelWidget()->setCaption( i18n("Waiting 2 secs before syncing next resource...") ); QTime timer; timer.start(); while ( timer.elapsed () < 2000 ) { qApp->processEvents(); } } } ++startRemote; ++startLocal; - + mAskForPreferences = false; } mPisyncFinished = true; } else { KCommandSocket* commandSocket = new KCommandSocket( "", mPassWordPiSync, port, mActiveSyncIP, this, mParent->topLevelWidget() ); connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int )), this, SLOT(deleteCommandSocket(KCommandSocket*, int)) ); commandSocket->readFile( syncFileName() ); } } void KSyncManager::deleteCommandSocket(KCommandSocket*s, int state) { //enum { success, errorW, errorR, quiet }; if ( state == KCommandSocket::errorR ||state == KCommandSocket::errorTO ||state == KCommandSocket::errorPW || state == KCommandSocket::errorCA ||state == KCommandSocket::errorFI ||state == KCommandSocket::errorUN||state == KCommandSocket::errorED ) { if ( state == KCommandSocket::errorPW ) mParent->topLevelWidget()->setCaption( i18n("Wrong password: Receiving remote file failed.") ); else if ( state == KCommandSocket::errorR ||state == KCommandSocket::errorTO ) mParent->topLevelWidget()->setCaption( i18n("ERROR: Receiving remote file failed.") ); else if ( state == KCommandSocket::errorCA ) mParent->topLevelWidget()->setCaption( i18n("Sync cancelled from remote.") ); else if ( state == KCommandSocket::errorFI ) mParent->topLevelWidget()->setCaption( i18n("File error on remote.") ); else if ( state == KCommandSocket::errorED ) mParent->topLevelWidget()->setCaption( i18n("Please close error dialog on remote.") ); else if ( state == KCommandSocket::errorUN ) mParent->topLevelWidget()->setCaption( i18n("Unknown error on remote.") ); delete s; if ( state == KCommandSocket::errorR ) { KCommandSocket* commandSocket = new KCommandSocket( "",mPassWordPiSync, mActiveSyncPort.toUInt(), mActiveSyncIP, this, mParent->topLevelWidget()); connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int)), this, SLOT(deleteCommandSocket(KCommandSocket*, int )) ); commandSocket->sendStop(); } mPisyncFinished = true; return; } else if ( state == KCommandSocket::errorW ) { mParent->topLevelWidget()->setCaption( i18n("ERROR:Writing back file failed.") ); mPisyncFinished = true; } else if ( state == KCommandSocket::successR ) { QTimer::singleShot( 1, this , SLOT ( readFileFromSocket())); } else if ( state == KCommandSocket::successW ) { mParent->topLevelWidget()->setCaption( i18n("Pi-Sync successful!") ); mPisyncFinished = true; } else if ( state == KCommandSocket::quiet ){ qDebug("KSS: quiet "); mPisyncFinished = true; } else { qDebug("KSS: Error: unknown state: %d ", state); mPisyncFinished = true; } delete s; } void KSyncManager::readFileFromSocket() { QString fileName = syncFileName(); bool syncOK = true; mParent->topLevelWidget()->setCaption( i18n("Remote file saved to temp file.") ); if ( ! syncWithFile( fileName , true ) ) { mParent->topLevelWidget()->setCaption( i18n("Syncing failed.") ); syncOK = false; } KCommandSocket* commandSocket = new KCommandSocket( mCurrentResourceRemote,mPassWordPiSync, mActiveSyncPort.toUInt(), mActiveSyncIP, this, mParent->topLevelWidget() ); connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int)), this, SLOT(deleteCommandSocket(KCommandSocket*, int )) ); if ( mWriteBackFile && syncOK ) { mParent->topLevelWidget()->setCaption( i18n("Sending back file ...") ); commandSocket->writeFile( fileName ); } else { commandSocket->sendStop(); if ( syncOK ) mParent->topLevelWidget()->setCaption( i18n("Pi-Sync succesful!") ); mPisyncFinished = true; } } KServerSocket:: KServerSocket ( QString pw, Q_UINT16 port, int backlog, QObject * parent, const char * name ) : QServerSocket( port, backlog, parent, name ) { mPendingConnect = 0; mPassWord = pw; mSocket = 0; mSyncActionDialog = 0; blockRC = false; mErrorMessage = 0; } void KServerSocket::waitForSocketFinish() { if ( mSocket ) { //qDebug("KSS:: waiting for finish operation"); QTimer::singleShot( 250, this , SLOT ( waitForSocketFinish())); return; } mSocket = new QSocket( this ); connect( mSocket , SIGNAL(readyRead()), this, SLOT(readClient()) ); connect( mSocket , SIGNAL(delayedCloseFinished()), this, SLOT(discardClient()) ); mSocket->setSocket( mPendingConnect ); mPendingConnect = 0; } void KServerSocket::newConnection ( int socket ) { // qDebug("KServerSocket:New connection %d ", socket); if ( mPendingConnect ) { qDebug("KSS::Error : new Connection"); return; } if ( mSocket ) { mPendingConnect = socket; QTimer::singleShot( 250, this , SLOT ( waitForSocketFinish())); return; qDebug("KSS::newConnection Socket deleted! "); delete mSocket; mSocket = 0; } mPendingConnect = 0; mSocket = new QSocket( this ); connect( mSocket , SIGNAL(readyRead()), this, SLOT(readClient()) ); connect( mSocket , SIGNAL(delayedCloseFinished()), this, SLOT(discardClient()) ); mSocket->setSocket( socket ); } void KServerSocket::discardClient() { diff --git a/libkdepim/ksyncprefsdialog.cpp b/libkdepim/ksyncprefsdialog.cpp index 744a914..1f9afcb 100644 --- a/libkdepim/ksyncprefsdialog.cpp +++ b/libkdepim/ksyncprefsdialog.cpp @@ -244,257 +244,257 @@ void KSyncPrefsDialog::setupSyncAlgTab() mIsPi = new QRadioButton ( i18n("Pi-Sync - all resources ( direct Kx/Pi to Kx/Pi sync )"), gr ); connect (mIsPi, SIGNAL( toggled(bool)), this, SLOT (kindChanged(bool) ) ); mIsPiSpecific = new QRadioButton ( i18n("Pi-Sync - selected resources ( direct Kx/Pi to Kx/Pi sync )"), gr ); connect (mIsPiSpecific, SIGNAL( toggled(bool)), this, SLOT (kindChanged(bool) ) ); mIsNotLocal = new QRadioButton ( i18n("Remote file (w down/upload command)"), gr ); connect (mIsLocal, SIGNAL( toggled(bool)), this, SLOT (kindChanged(bool) ) ); mIsPhone = new QRadioButton ( i18n("Mobile device (cell phone)"), gr ); connect (mIsPhone, SIGNAL( toggled(bool)), this, SLOT (kindChanged(bool) ) ); QVGroupBox* gb1 = new QVGroupBox( i18n("Profile kind specific settings"), topFrame); topLayout->addMultiCellWidget(gb1, iii,iii,0,1); ++iii; // ****************************************** // Profile kind specific settings { // *** phone ******************************* QVGroupBox* topFrame = gb1; phoneWidget = new QVBox( topFrame); //topLayout->addMultiCellWidget(phoneWidget, iii,iii,0,1); //++iii; mWriteContactToSIM = 0;//new QCheckBox( i18n("Sync contacts with phone SIM card (If not, sync with phone memory)"), phoneWidget ); QHBox* temphb = new QHBox( phoneWidget ); new QLabel( i18n("I/O device: "), temphb ); mPhoneDevice = new QLineEdit( temphb); button = new QPushButton( i18n("Help..."), temphb ); connect ( button, SIGNAL( clicked()), this, SLOT ( helpDevice() ) ); temphb = new QHBox( phoneWidget ); new QLabel( i18n("Connection: "), temphb ); mPhoneConnection = new QLineEdit( temphb); button = new QPushButton( i18n("Help..."), temphb ); connect ( button, SIGNAL( clicked()), this, SLOT ( helpConnection() ) ); temphb = new QHBox( phoneWidget ); new QLabel( i18n("Model(opt.): "), temphb ); mPhoneModel = new QLineEdit( temphb); button = new QPushButton( i18n("Help..."), temphb ); connect ( button, SIGNAL( clicked()), this, SLOT ( helpModel() ) ); // *** local******************************* localFileWidget = new QVBox( topFrame); //topLayout->addMultiCellWidget(localFileWidget, iii,iii,0,1); //++iii; temphb = new QHBox( localFileWidget ); lab = new QLabel( i18n("Local file Cal:"), temphb ); lab = new QLabel( i18n("Local file ABook:"), temphb ); lab = new QLabel( i18n("Local file PWMgr:"), temphb ); temphb = new QHBox( localFileWidget ); button = new QPushButton( i18n("Choose..."), temphb ); connect ( button, SIGNAL( clicked()), this, SLOT ( chooseFile() ) ); button = new QPushButton( i18n("Choose..."), temphb ); connect ( button, SIGNAL( clicked()), this, SLOT ( chooseFileAB() ) ); button = new QPushButton( i18n("Choose..."), temphb ); connect ( button, SIGNAL( clicked()), this, SLOT ( chooseFilePWM() ) ); temphb = new QHBox( localFileWidget ); mRemoteFile = new QLineEdit( temphb); mRemoteFileAB = new QLineEdit( temphb); mRemoteFilePWM = new QLineEdit( temphb); mIsKapiFileL = new QCheckBox( i18n("Addressbook file (*.vcf) is used by KA/Pi"), localFileWidget ); // *** remote******************************* remoteFileWidget = new QVBox( topFrame); //topLayout->addMultiCellWidget(remoteFileWidget, iii,iii,0,1); //++iii; temphb = new QHBox( remoteFileWidget ); new QLabel( i18n("Calendar:"), temphb); new QLabel( i18n("AddressBook:"), temphb); new QLabel( i18n("PWManager:"), temphb); lab = new QLabel( i18n("Pre sync (download) command:"), remoteFileWidget); temphb = new QHBox( remoteFileWidget ); mRemotePrecommand = new QLineEdit(temphb); mRemotePrecommandAB = new QLineEdit(temphb); mRemotePrecommandPWM = new QLineEdit(temphb); lab = new QLabel( i18n("Local temp file:"), remoteFileWidget); temphb = new QHBox( remoteFileWidget ); mLocalTempFile = new QLineEdit(temphb); mLocalTempFileAB = new QLineEdit(temphb); mLocalTempFilePWM = new QLineEdit(temphb); lab = new QLabel( i18n("Post sync (upload) command:"), remoteFileWidget); temphb = new QHBox( remoteFileWidget ); mRemotePostcommand = new QLineEdit(temphb ); mRemotePostcommandAB = new QLineEdit(temphb ); mRemotePostcommandPWM = new QLineEdit(temphb ); mIsKapiFileR = new QCheckBox( i18n("Addressbook file is used by KA/Pi"), remoteFileWidget ); lab = new QLabel( i18n("Fill in default values for:"), remoteFileWidget); temphb = new QHBox( remoteFileWidget ); button = new QPushButton( i18n("ssh/scp"), temphb ); connect ( button, SIGNAL( clicked()), this, SLOT (fillSSH() ) ); button = new QPushButton( i18n("ftp"), temphb ); connect ( button, SIGNAL( clicked()), this, SLOT (fillFTP() ) ); lab = new QLabel( i18n("Hint: Use $PWD$ for placeholder of password!"), remoteFileWidget); // *** pi-sync******************************* piWidget = new QVBox( topFrame); //topLayout->addMultiCellWidget(piWidget, iii,iii,0,1); //++iii; temphb = new QHBox( piWidget ); new QLabel( i18n("Calendar:"), temphb); new QLabel( i18n("AddressBook:"), temphb); new QLabel( i18n("PWManager:"), temphb); lab = new QLabel( i18n("Password for remote access: (could be the same for each)"), piWidget); temphb = new QHBox( piWidget ); mRemotePw = new QLineEdit(temphb); mRemotePwAB = new QLineEdit(temphb); mRemotePwPWM = new QLineEdit(temphb); lab = new QLabel( i18n("Remote IP address: (could be the same for each)"), piWidget); temphb = new QHBox( piWidget ); mRemoteIP = new QLineEdit(temphb); mRemoteIPAB = new QLineEdit(temphb); mRemoteIPPWM = new QLineEdit(temphb); lab = new QLabel( i18n("Remote port number: (should be different for each)"), piWidget); temphb = new QHBox( piWidget ); mRemotePort = new QLineEdit(temphb); mRemotePortAB = new QLineEdit(temphb); mRemotePortPWM = new QLineEdit(temphb); - lab = new QLabel( i18n("Local/remote Resource sync partners"), piWidget); + lab = new QLabel( i18n("Local/remote Resource sync partners (Leave empty to not sync)"), piWidget); mTableBox = new QHBox( piWidget ); mResTableKopi = new QTable( 1, 1, mTableBox ); mResTableKapi = new QTable( 1, 1, mTableBox ); mResTablePwmpi = new QTable( 1, 1, mTableBox ); mResTableKopi->horizontalHeader()->setLabel( 0, i18n("Remote") ); mResTableKapi->horizontalHeader()->setLabel( 0, i18n("Remote") ); mResTablePwmpi->horizontalHeader()->setLabel( 0, i18n("Remote") ); mResTableKopi->setLeftMargin( 80 ); } // ****************************************** // Profile kind specific settings END } void KSyncPrefsDialog::readResources() { mResourcesKopi.clear(); mResourcesKapi.clear(); KConfig fc(locateLocal("config","kopicalendarrc")); fc.setGroup("CC"); int numCals = fc.readNumEntry("NumberCalendars",0 ); int curCal = 1; while ( curCal <= numCals ) { QString prefix = "Cal_" +QString::number( curCal ); QString name = fc.readEntry( prefix+"_Name", "Calendar"); mResourcesKopi.append( name ); ++curCal; } mResTableKopi->setNumRows( mResourcesKopi.count() ); int i; for ( i = 0;i < mResourcesKopi.count(); ++i ) { mResTableKopi->verticalHeader ()->setLabel( i, mResourcesKopi[i] ); } } void KSyncPrefsDialog::readFilter() { mFilterKapi.clear(); mFilterKopi.clear(); KConfig cfgko(locateLocal("config","korganizerrc")); KConfig cfgka(locateLocal("config","kaddressbookrc")); cfgko.setGroup("General"); mFilterKopi = cfgko.readListEntry("CalendarFilters"); cfgka.setGroup("Filter"); int count = cfgka.readNumEntry( "Count", 0 ); for ( int i = 0; i < count; i++ ) { cfgka.setGroup("Filter_"+QString::number( i ) ); mFilterKapi.append( cfgka.readEntry("Name", "internal error") ); } mFilterOutCal->clear(); mFilterInCal->clear(); mFilterOutAB->clear(); mFilterInAB->clear(); QStringList temp = mFilterKopi; temp.prepend(i18n("No Filter") ); mFilterOutCal->insertStringList( temp ); mFilterInCal->insertStringList( temp ); temp = mFilterKapi; temp.prepend(i18n("No Filter") ); mFilterOutAB->insertStringList( temp ); mFilterInAB->insertStringList( temp ); } void KSyncPrefsDialog::slotOK() { if ( mMyMachineName->text() == "undefined" ) { KMessageBox::error(this,i18n("Local device name undefined!\nPlease define device name!"),i18n("KO/Pi config error")); return; } int i; for (i = 0; i < mSyncProfileNames.count(); ++ i) { if ( mSyncProfileNames.contains( mSyncProfileNames[i]) > 1 ) { KMessageBox::error(this,i18n("Multiple profiles with same name!\nPlease use unique profile names!"),i18n("KO/Pi config error")); return; } } usrWriteConfig(); QDialog::accept(); } void KSyncPrefsDialog::accept() { slotOK(); } void KSyncPrefsDialog::chooseFile() { QString fn = QDir::homeDirPath(); fn =KFileDialog:: getOpenFileName( fn, i18n("Sync filename(*.ics/*.vcs)"), this ); if ( fn == "" ) return; mRemoteFile->setText( fn ); } void KSyncPrefsDialog::chooseFileAB() { QString fn = QDir::homeDirPath(); fn =KFileDialog:: getOpenFileName( fn, i18n("Sync filename(*.vcf)"), this ); if ( fn == "" ) return; mRemoteFileAB->setText( fn ); } void KSyncPrefsDialog::chooseFilePWM() { QString fn = QDir::homeDirPath(); fn =KFileDialog:: getOpenFileName( fn, i18n("Sync filename(*.pwm)"), this ); if ( fn == "" ) return; mRemoteFilePWM->setText( fn ); } void KSyncPrefsDialog::textChanged( const QString & s ) { if ( mProfileBox->count() == 0 ) return; if ( currentSelection < 3 ) { //KMessageBox::error(this,i18n("This profil name\ncannot be edited!\n"),i18n("KO/Pi config error")); mProfileBox->blockSignals( true ); mProfileBox->setCurrentItem(mProfileBox-> currentItem ()); mProfileBox->blockSignals( false ); return; } //qDebug("cur i %d ",mProfileBox-> currentItem () ); mProfileBox->changeItem ( s, mProfileBox-> currentItem () ) ; KSyncProfile* prof = mSyncProfiles.at(mProfileBox-> currentItem ()) ; prof->setName( s ); mSyncProfileNames[mProfileBox-> currentItem ()] = s; |