1 files changed, 531 insertions, 36 deletions

diff --git a/libkdepim/ksyncmanager.cpp b/libkdepim/ksyncmanager.cpp
index c0cc840..5d48884 100644
--- a/libkdepim/ksyncmanager.cpp
+++ b/libkdepim/ksyncmanager.cpp
@@ -27,38 +27,42 @@
 #ifndef _WIN32_
 #include <unistd.h>
 #endif
 
 
 #include "ksyncprofile.h"
 #include "ksyncprefsdialog.h"
 #include "kpimprefs.h"
+#include <kmessagebox.h>
 
 #include <qdir.h>
 #include <qprogressbar.h>
 #include <qpopupmenu.h>
 #include <qpushbutton.h>
 #include <qradiobutton.h>
 #include <qbuttongroup.h>
 #include <qtimer.h>
 #include <qmessagebox.h>
 #include <qapplication.h>
 #include <qlineedit.h>
 #include <qdialog.h>
 #include <qlayout.h>
+#include <qtextcodec.h>
+#include <qlabel.h>
 
 #include <klocale.h>
 #include <kglobal.h>
 #include <kconfig.h>
 #include <kfiledialog.h>
 
 KSyncManager::KSyncManager(QWidget* parent, KSyncInterface* implementation, TargetApp ta, KPimPrefs* prefs, QPopupMenu* syncmenu)
-  : QObject(), mParent(parent), mImplementation(implementation), mTargetApp(ta), mSyncMenu(syncmenu)
+    : QObject(), mParent(parent), mImplementation(implementation), mTargetApp(ta), mPrefs(prefs ),mSyncMenu(syncmenu)
 {
+    mServerSocket = 0;
     bar = new QProgressBar ( 1, 0 );
     bar->setCaption ("");
     
     int w = 300;
     if ( QApplication::desktop()->width() < 320 )
         w = 220;
     int h = bar->sizeHint().height() ;
     int dw = QApplication::desktop()->width();
@@ -67,43 +71,46 @@ KSyncManager::KSyncManager(QWidget* parent, KSyncInterface* implementation, Targ
 
 }
 
 KSyncManager::~KSyncManager()
 {
   delete bar;
 }
 
-
+//LR ok
 void KSyncManager::fillSyncMenu()
 {
     if ( mSyncMenu->count() )
         mSyncMenu->clear();
     
     mSyncMenu->insertItem( i18n("Configure..."), 0 );
     mSyncMenu->insertSeparator();
+    if ( mServerSocket == 0 ) {
+        mSyncMenu->insertItem( i18n("Enable Pi-Sync"), 2 );
+    } else {
+        mSyncMenu->insertItem( i18n("Disable Pi-Sync"), 3 );
+    }
+    mSyncMenu->insertSeparator();
     mSyncMenu->insertItem( i18n("Multiple sync"), 1 );
     mSyncMenu->insertSeparator();
     
     KConfig config ( locateLocal( "config","ksyncprofilesrc"  ) );
     config.setGroup("General");
     QStringList prof = config.readListEntry("SyncProfileNames");
     mLocalMachineName = config.readEntry("LocalMachineName","undefined");
-    if ( prof.count() < 3 ) {
+    if ( prof.count() < 2 ) {
         prof.clear();
-        prof << i18n("Sharp_DTM");
-        prof << i18n("Local_file");
-        prof << i18n("Last_file");
+        prof << i18n("Sharp_DTM");
+        prof << i18n("Local_file");
         KSyncProfile* temp = new KSyncProfile ();
         temp->setName( prof[0] );
         temp->writeConfig(&config);
         temp->setName( prof[1] );
         temp->writeConfig(&config);
-        temp->setName( prof[2] );
-        temp->writeConfig(&config);
         config.setGroup("General");
         config.writeEntry("SyncProfileNames",prof);
         config.writeEntry("ExternSyncProfiles","Sharp_DTM");
         config.sync();
         delete temp;
     }
     mExternSyncProfiles = config.readListEntry("ExternSyncProfiles");
     mSyncProfileNames = prof;
@@ -136,16 +143,27 @@ void KSyncManager::slotSyncMenu( int action )
         //confSync();
 
         return;
     }
     if ( action == 1 ) {
         multiSync( true );
         return;
     }
+    if ( action == 2 ) {
+        enableQuick();
+        QTimer::singleShot ( 1, this, SLOT ( fillSyncMenu() ) ); 
+        return;
+    }
+    if ( action == 3 ) {
+        delete mServerSocket;
+        mServerSocket = 0;
+        QTimer::singleShot ( 1, this, SLOT ( fillSyncMenu() ) ); 
+        return;
+    }
 
     if (blockSave())
       return;
 
     setBlockSave(true);
 
     mCurrentSyncProfile = action - 1000 ;
     mCurrentSyncDevice = mSyncProfileNames[mCurrentSyncProfile] ;
@@ -193,24 +211,78 @@ void KSyncManager::slotSyncMenu( int action )
               
           }
         } else {
             if (  temp->getIsPhoneSync() ) {
                 mPhoneDevice = temp->getPhoneDevice( ) ;
                 mPhoneConnection = temp->getPhoneConnection( );
                 mPhoneModel = temp->getPhoneModel( );
                 syncPhone();
-            } else
+            } else if (  temp->getIsPiSync() ) {
+                mPassWordPiSync = temp->getRemotePw();
+                mActiveSyncPort = temp->getRemotePort();
+                mActiveSyncIP = temp->getRemoteIP();
+                syncPi();
+            }
                 syncRemote( temp );
 
         }
     }
     delete temp;
     setBlockSave(false);
 }
+void KSyncManager::enableQuick()
+{
+    QDialog dia ( 0, "input-dialog", true );
+    QLineEdit lab ( &dia );
+    QVBoxLayout lay( &dia );
+    lab.setText( mPrefs->mPassiveSyncPort );
+    lay.setMargin(7);
+    lay.setSpacing(7);
+    int po = 9197+mTargetApp;
+    QLabel label ( i18n("Port number (Default: %1)").arg(po), &dia );
+    lay.addWidget( &label);
+    lay.addWidget( &lab);
+
+    QLineEdit lepw ( &dia );
+    lepw.setText( mPrefs->mPassiveSyncPw );
+    QLabel label2 ( i18n("Password to enable\naccess from remote:"), &dia );
+    lay.addWidget( &label2);
+    lay.addWidget( &lepw);
+    dia.setFixedSize( 230,80 );
+    dia.setCaption( i18n("Enter port for Pi-Sync") );
+    QPushButton pb ( "OK",  &dia);
+    lay.addWidget( &pb );
+    connect(&pb, SIGNAL( clicked() ), &dia, SLOT ( accept() ) );
+    dia.show();
+    if ( ! dia.exec() )
+        return;
+    dia.hide();
+    qApp->processEvents();
+    mPrefs->mPassiveSyncPw = lepw.text();
+    mPrefs->mPassiveSyncPort = lab.text();
+    bool ok;
+    Q_UINT16 port = mPrefs->mPassiveSyncPort.toUInt(&ok);
+    if ( ! ok ) {
+        KMessageBox::information( 0, i18n("No valid port"));
+        return;
+    }
+    //qDebug("port %d ", port);
+    mServerSocket = new KServerSocket ( mPrefs->mPassiveSyncPw, port ,1 );
+    mServerSocket->setFileName( defaultFileName() );
+    //qDebug("connected ");
+    if ( !mServerSocket->ok() ) {
+        KMessageBox::information( 0, i18n("Failed to bind or\nlisten to the port!"));
+        delete mServerSocket;
+        mServerSocket = 0;
+        return;
+    }
+    connect( mServerSocket, SIGNAL ( saveFile() ),this, SIGNAL  ( save() ) );
+    connect( mServerSocket, SIGNAL ( file_received( bool ) ), this,  SIGNAL  ( getFile( bool ) ) );
+}
 
 void KSyncManager::syncLocalFile()
 {
 
     QString fn =mLastSyncedLocalFile;
     QString ext;
 
           switch(mTargetApp)
@@ -266,17 +338,16 @@ bool  KSyncManager::syncWithFile( QString fn , bool quick )
     if ( result == 0 ) {
         //qDebug("Now sycing ... ");
         if ( ret = mImplementation->sync( this, fn, mSyncAlgoPrefs ) )
             mParent->setCaption( i18n("Synchronization successful") );
         else
             mParent->setCaption( i18n("Sync cancelled or failed. Nothing synced.") );
         if ( ! quick )
             mLastSyncedLocalFile = fn;
-        mImplementation->sync_setModified();
     }
     return ret;
 }
 void KSyncManager::quickSyncLocalFile()
 {
     
     if ( syncWithFile( mLastSyncedLocalFile, false ) ) {
         qDebug("quick syncLocalFile() successful ");
@@ -305,17 +376,17 @@ void KSyncManager::multiSync( bool askforPrefs  )
     }
     mParent->setCaption(i18n("Multiple sync started.") );
     qApp->processEvents();
     int num = ringSync() ;
     if (  num > 1 )
         ringSync();
     setBlockSave(false);
     if ( num )
-        mImplementation->sync_save();
+        emit save();
     if ( num )
         mParent->setCaption(i18n("%1 profiles synced. Multiple sync completed!").arg(num) );
     else
         mParent->setCaption(i18n("Nothing synced! No profiles defined for multisync!"));
     return;
 }
 int KSyncManager::ringSync()
 {
@@ -423,36 +494,36 @@ void KSyncManager::syncRemote( KSyncProfile* prof,  bool ask)
         return;
     }
 
     QString preCommand;
     QString localTempFile;
     QString postCommand;
 
     switch(mTargetApp)
-      {
-      case (KAPI):
-        preCommand = prof->getPreSyncCommandAB();
-        postCommand = prof->getPostSyncCommandAB();
-        localTempFile = prof->getLocalTempFileAB();
-        break;
-      case (KOPI):
-        preCommand = prof->getPreSyncCommand();
-        postCommand = prof->getPostSyncCommand();
-        localTempFile = prof->getLocalTempFile();
-        break;
-      case (PWMPI):
-        preCommand = prof->getPreSyncCommandPWM();
-        postCommand = prof->getPostSyncCommandPWM();
-        localTempFile = prof->getLocalTempFilePWM();
-        break;
-      default:
-        qDebug("KSyncManager::syncRemote: invalid apptype selected");
-        break;
-      }
+        {
+        case (KAPI):
+            preCommand = prof->getPreSyncCommandAB();
+            postCommand = prof->getPostSyncCommandAB();
+            localTempFile = prof->getLocalTempFileAB();
+            break;
+        case (KOPI):
+            preCommand = prof->getPreSyncCommand();
+            postCommand = prof->getPostSyncCommand();
+            localTempFile = prof->getLocalTempFile();
+            break;
+        case (PWMPI):
+            preCommand = prof->getPreSyncCommandPWM();
+            postCommand = prof->getPostSyncCommandPWM();
+            localTempFile = prof->getLocalTempFilePWM();
+            break;
+        default:
+            qDebug("KSyncManager::syncRemote: invalid apptype selected");
+            break;
+        }
 
 
     int fi;
     if ( (fi = preCommand.find("$PWD$")) > 0 ) {
         QString pwd = getPassword();
         preCommand = preCommand.left( fi )+ pwd + preCommand.mid( fi+5 );
 
     }
@@ -609,38 +680,36 @@ void KSyncManager::confSync()
 void KSyncManager::syncSharp()
 {
     if ( ! syncExternalApplication("sharp") )
         qDebug("ERROR sync sharp  ");;
 }
 
 bool KSyncManager::syncExternalApplication(QString  resource)
 {
-    if (  mImplementation->sync_isModified()  )
-        mImplementation->sync_save();
+   
+    emit save();
 
     if ( mAskForPreferences )
         edit_sync_options();
 
     qDebug("sync %s", resource.latin1());
 
     bool syncOK = mImplementation->syncExternal(this, resource);
 
     return syncOK;
 
 }
 
 void KSyncManager::syncPhone()
 {
-    if (  mImplementation->sync_isModified()  )
-        mImplementation->sync_save();
+    emit save();
 
     qDebug("pending syncPhone(); ");
     //mView->syncPhone();
-    mImplementation->sync_setModified();
 
 }
 
 void KSyncManager::showProgressBar(int percentage, QString caption, int total)
 {
   if (!bar->isVisible())
   {
     bar->setCaption (caption); 
@@ -656,8 +725,434 @@ void KSyncManager::hideProgressBar()
 {
   bar->hide();
 }
 
 bool KSyncManager::isProgressBarCanceled()
 {
   return !bar->isVisible();
 }
+
+QString KSyncManager::syncFileName()
+{
+
+    QString fn = "tempfile";
+    switch(mTargetApp)
+        {
+        case (KAPI):
+            fn = "addressbook.vcf";
+            break;
+        case (KOPI):
+            fn = "synccalendar.ics";
+            break;
+        case (PWMPI):
+            fn = "manager.pwm";
+            break;
+        default:
+            break;
+        }
+#ifdef _WIN32_
+    return  locateLocal( "tmp", fn );
+#else
+    return (QString( "/tmp/" )+ fn );
+#endif
+}
+
+void KSyncManager::syncPi()
+{
+    qApp->processEvents();
+    bool ok;
+    Q_UINT16 port = mActiveSyncPort.toUInt(&ok);
+    if ( ! ok ) {
+        mParent->setCaption( i18n("Sorry, no valid port.Syncing cancelled.") );
+        return;
+    }
+    KCommandSocket* commandSocket = new KCommandSocket( mPassWordPiSync, port, mActiveSyncIP, this );
+    connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int )), this, SLOT(deleteCommandSocket(KCommandSocket*, int)) );
+    mParent->setCaption( i18n("Sending request for remote file ...") );
+    commandSocket->readFile(  syncFileName() );
+}
+
+void KSyncManager::deleteCommandSocket(KCommandSocket*s, int state)
+{
+    qDebug("MainWindow::deleteCommandSocket %d", state);
+    
+    //enum { success, errorW, errorR, quiet };
+    if ( state == KCommandSocket::errorR ) {
+         mParent->setCaption( i18n("ERROR: Receiving remote file failed.") );
+        delete s;
+        KCommandSocket* commandSocket = new KCommandSocket( mPassWordPiSync, mActiveSyncPort.toUInt(), mActiveSyncIP, this );
+        connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int)), this, SLOT(deleteCommandSocket(KCommandSocket*, int )) );
+        commandSocket->sendStop();
+        return;
+        
+    } else  if ( state == KCommandSocket::errorW ) {
+         mParent->setCaption( i18n("ERROR:Writing back file failed.") );
+
+    } else  if ( state == KCommandSocket::successR ) {
+        QTimer::singleShot( 1, this , SLOT ( readFileFromSocket()));
+
+    } else  if ( state == KCommandSocket::successW ) {
+         mParent->setCaption( i18n("Pi-Sync succesful!") );
+    }
+
+    delete s;
+}
+
+void KSyncManager::readFileFromSocket()
+{
+    QString fileName = syncFileName();
+    mParent->setCaption( i18n("Remote file saved to temp file.") );
+    if ( ! syncWithFile( fileName , true ) ) {
+        mParent->setCaption( i18n("Syncing failed.") );
+        qDebug("Syncing failed ");
+        return;
+    }
+    KCommandSocket* commandSocket = new KCommandSocket( mPassWordPiSync, mActiveSyncPort.toUInt(), mActiveSyncIP, this );
+    connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int)), this, SLOT(deleteCommandSocket(KCommandSocket*, int )) );
+    if ( mWriteBackFile ) 
+        commandSocket->writeFile(  fileName );
+    else {
+        commandSocket->sendStop();
+        mParent->setCaption( i18n("Pi-Sync succesful!") );
+    }
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+KServerSocket:: KServerSocket ( QString pw, Q_UINT16 port, int backlog, QObject * parent, const char * name ) : QServerSocket( port, backlog, parent, name )
+{
+    mPassWord = pw;
+    mSocket = 0;
+    mSyncActionDialog = 0;
+    blockRC = false;
+};
+
+void KServerSocket::newConnection ( int socket ) 
+{
+    // qDebug("KServerSocket:New connection %d ", socket); 
+    if ( mSocket ) {
+        qDebug("KServerSocket::newConnection Socket deleted! ");
+        delete mSocket;
+        mSocket = 0;
+    }
+    mSocket = new QSocket( this );
+    connect( mSocket , SIGNAL(readyRead()), this, SLOT(readClient()) );
+    connect( mSocket , SIGNAL(delayedCloseFinished()), this, SLOT(discardClient()) );
+    mSocket->setSocket( socket );
+}
+
+void KServerSocket::discardClient()
+{
+    //qDebug(" KServerSocket::discardClient()");
+    if ( mSocket ) {
+        delete mSocket;
+        mSocket = 0;
+    }
+    //emit endConnect();
+}
+void KServerSocket::readClient()
+{
+    if ( blockRC )
+        return;
+    if ( mSocket == 0 ) {
+        qDebug("ERROR::KServerSocket::readClient(): mSocket == 0  ");
+        return;
+    }
+    qDebug("KServerSocket readClient()");
+    if ( mSocket->canReadLine() ) {
+        QString line = mSocket->readLine();
+        qDebug("KServerSocket readline: %s ", line.latin1());
+        QStringList tokens = QStringList::split( QRegExp("[ \r\n][ \r\n]*"), line );
+        if ( tokens[0] == "GET" ) {
+            if (  tokens[1] == mPassWord )
+                //emit sendFile( mSocket );
+                send_file();
+            else {
+                KMessageBox::information( 0, i18n("ERROR:\nGot send file request\nwith invalid password"));
+                qDebug("password %s, invalid password %s ",mPassWord.latin1(), tokens[1].latin1() );
+            }
+        } 
+        if ( tokens[0] == "PUT" ) {
+            if (  tokens[1] == mPassWord ) {
+                //emit getFile( mSocket );
+                blockRC = true;
+                get_file();
+            }
+            else {
+                KMessageBox::information( 0, i18n("ERROR:\nGot receive file request\nwith invalid password"));
+                qDebug("password %s, invalid password %s ",mPassWord.latin1(), tokens[1].latin1() );
+            }
+        } 
+        if ( tokens[0] == "STOP" ) {
+            //emit endConnect();
+            end_connect();
+        }
+    }
+}
+void KServerSocket::end_connect()
+{
+    delete mSyncActionDialog;
+    mSyncActionDialog = 0;
+}
+void KServerSocket::send_file()
+{
+    //qDebug("MainWindow::sendFile(QSocket* s) ");
+    if ( mSyncActionDialog )
+        delete mSyncActionDialog;
+    mSyncActionDialog = new QDialog ( 0, "input-dialog", true );
+    mSyncActionDialog->setCaption(i18n("Received sync request"));
+    QLabel* label = new QLabel( i18n("Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog."), mSyncActionDialog );
+    QVBoxLayout* lay = new QVBoxLayout( mSyncActionDialog );
+    lay->addWidget( label);
+    lay->setMargin(7);
+    lay->setSpacing(7);
+    mSyncActionDialog->setFixedSize( 230, 120);
+    mSyncActionDialog->show();
+    qDebug("KSS::saving ... ");
+    emit saveFile();
+    qApp->processEvents();
+    QString fileName = mFileName;
+    QFile file( fileName );
+    if (!file.open( IO_ReadOnly ) ) {
+        delete mSyncActionDialog;
+        mSyncActionDialog = 0;
+        qDebug("KSS::error open file ");
+        mSocket->close();
+        if ( mSocket->state() == QSocket::Idle )
+            QTimer::singleShot( 10, this , SLOT ( discardClient()));
+        return ;
+        
+    } 
+    mSyncActionDialog->setCaption( i18n("Sending file...") );
+    QTextStream ts( &file );
+    ts.setCodec( QTextCodec::codecForName("utf8") );
+    QTextStream os( mSocket );
+    os.setCodec( QTextCodec::codecForName("utf8") );
+    //os.setEncoding( QTextStream::UnicodeUTF8 );
+    while ( ! ts.atEnd() ) {
+        os << ts.readLine() << "\n";
+    }
+    //os << ts.read();
+    file.close();
+    mSyncActionDialog->setCaption( i18n("Waiting for synced file...") );
+    mSocket->close();
+    if ( mSocket->state() == QSocket::Idle )
+        QTimer::singleShot( 10, this , SLOT ( discardClient()));
+}
+void KServerSocket::get_file()
+{
+    mSyncActionDialog->setCaption( i18n("Receiving synced file...") );
+   
+    piTime.start();
+    piFileString = "";
+    QTimer::singleShot( 1, this , SLOT (readBackFileFromSocket( ) ));
+}
+
+
+void KServerSocket::readBackFileFromSocket()
+{
+    //qDebug("readBackFileFromSocket() %d ", piTime.elapsed ());
+    while ( mSocket->canReadLine ()  ) {
+        piTime.restart();
+        QString line = mSocket->readLine ();
+        piFileString += line;
+        //qDebug("readline: %s ", line.latin1());
+        mSyncActionDialog->setCaption( i18n("Received %1 bytes").arg( piFileString.length()  ) );
+
+    }
+    if ( piTime.elapsed () < 3000 ) {
+        // wait for more 
+        //qDebug("waitformore ");
+        QTimer::singleShot( 100, this , SLOT (readBackFileFromSocket( ) ));
+        return;
+    }
+    QString fileName = mFileName;
+    QFile file ( fileName );
+    if (!file.open( IO_WriteOnly ) ) {
+        delete mSyncActionDialog;
+        mSyncActionDialog = 0;
+        qDebug("error open cal file ");
+        piFileString = "";
+        emit file_received( false );
+        blockRC = false;
+        return ;
+                    
+    } 
+
+    // mView->setLoadedFileVersion(QDateTime::currentDateTime().addSecs( -1));
+    QTextStream ts ( &file );
+    ts.setCodec( QTextCodec::codecForName("utf8") );
+    mSyncActionDialog->setCaption( i18n("Writing file to disk...") );
+    ts << piFileString;
+    mSocket->close();
+    if ( mSocket->state() == QSocket::Idle )
+        QTimer::singleShot( 10, this , SLOT ( discardClient()));
+    file.close(); 
+    delete mSyncActionDialog;
+    mSyncActionDialog = 0;
+    piFileString = "";
+    blockRC = false;
+    emit file_received( true );
+
+}
+
+KCommandSocket::KCommandSocket (  QString password, Q_UINT16 port, QString host, QObject * parent, const char * name ): QObject( parent, name )
+{
+    mPassWord = password;
+    mSocket = 0;
+    mPort = port;
+    mHost = host;
+
+    mRetVal = quiet;
+    mTimerSocket = new QTimer ( this );
+    connect( mTimerSocket, SIGNAL ( timeout () ), this, SLOT ( deleteSocket()  ) );
+}
+void KCommandSocket::readFile( QString fn )
+{
+    if ( !mSocket ) {
+        mSocket = new QSocket( this );
+        connect( mSocket, SIGNAL(readyRead()), this, SLOT(startReadFileFromSocket()) );
+        connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
+    }
+    mFileString = "";
+    mFileName = fn;
+    mFirst = true;
+    mSocket->connectToHost( mHost, mPort ); 
+    QTextStream os( mSocket );
+    os.setEncoding( QTextStream::UnicodeUTF8 );
+    os << "GET " << mPassWord << "\r\n";
+    mTimerSocket->start( 10000 );
+}
+
+void KCommandSocket::writeFile( QString fileName  )
+{
+    if ( !mSocket ) {
+        mSocket = new QSocket( this );
+        connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
+        connect( mSocket, SIGNAL(connected ()), this, SLOT(writeFileToSocket()) );
+    }
+    mFileName = fileName ;
+    mSocket->connectToHost( mHost, mPort ); 
+}
+void KCommandSocket::writeFileToSocket()
+{
+    QFile file2( mFileName );
+    if (!file2.open( IO_ReadOnly ) ) {
+        mRetVal= errorW;
+        mSocket->close();
+        if ( mSocket->state() == QSocket::Idle )
+            QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
+        return ;
+    }  
+    QTextStream ts2( &file2 );
+    ts2.setCodec( QTextCodec::codecForName("utf8") );
+    QTextStream os2( mSocket );
+    os2.setCodec( QTextCodec::codecForName("utf8") );
+    os2 << "PUT " << mPassWord << "\r\n";;
+    while ( ! ts2.atEnd() ) {
+        os2 << ts2.readLine() << "\n";
+    }
+    mRetVal= successW;
+    file2.close();
+    mSocket->close();
+    if ( mSocket->state() == QSocket::Idle )
+        QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
+}
+void KCommandSocket::sendStop()
+{
+    if ( !mSocket ) {
+        mSocket = new QSocket( this );
+        connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
+    }
+    mSocket->connectToHost( mHost, mPort ); 
+    QTextStream os2( mSocket );
+    os2.setCodec( QTextCodec::codecForName("utf8") );
+    os2 << "STOP\r\n";
+    mSocket->close();
+    if ( mSocket->state() == QSocket::Idle )
+        QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
+}
+
+void KCommandSocket::startReadFileFromSocket()
+{
+    if ( ! mFirst )
+        return;
+    mFirst = false;
+    mTimerSocket->stop();
+    mFileString = "";
+    mTime.start();
+    QTimer::singleShot( 1, this , SLOT (readFileFromSocket( ) ));
+
+}
+void KCommandSocket::readFileFromSocket()
+{
+    //qDebug("readBackFileFromSocket() %d ", mTime.elapsed ());
+    while ( mSocket->canReadLine ()  ) {
+        mTime.restart();
+        QString line = mSocket->readLine ();
+        mFileString += line;
+        //qDebug("readline: %s ", line.latin1());
+    }
+    if ( mTime.elapsed () < 3000 ) {
+        // wait for more 
+        //qDebug("waitformore ");
+        QTimer::singleShot( 100, this , SLOT (readFileFromSocket( ) ));
+        return;
+    }
+    QString fileName = mFileName;
+    QFile file ( fileName );
+    if (!file.open( IO_WriteOnly ) ) {
+        mFileString = "";
+        mRetVal = errorR;
+        qDebug("Error open temp calender file for writing: %s",fileName.latin1() );
+        deleteSocket();
+        return ;
+                    
+    } 
+    // mView->setLoadedFileVersion(QDateTime::currentDateTime().addSecs( -1));
+    QTextStream ts ( &file );
+    ts.setCodec( QTextCodec::codecForName("utf8") );
+    ts << mFileString;
+    file.close();  
+    mFileString = "";
+    mRetVal = successR;
+    mSocket->close();
+    // if state is not idle, deleteSocket(); is called via 
+    //  connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
+    if ( mSocket->state() == QSocket::Idle )
+        deleteSocket();
+}
+
+void KCommandSocket::deleteSocket()
+{
+    if ( mTimerSocket->isActive () ) {
+      mTimerSocket->stop();
+      KMessageBox::information( 0, i18n("ERROR:\nConnection to remote host timed out!\nDid you forgot to enable\nsyncing on remote host? "));
+      mRetVal = errorR;
+    }
+    //qDebug("KCommandSocket::deleteSocket() %d", mRetVal ); 
+    if ( mSocket)
+        delete mSocket;
+    mSocket = 0; 
+    emit commandFinished( this, mRetVal );
+}
+