summaryrefslogtreecommitdiffabout
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--bin/kdepim/kaddressbook/germantranslation.txt2
-rw-r--r--kabc/stdaddressbook.cpp5
-rw-r--r--kabc/stdaddressbook.h2
-rw-r--r--kaddressbook/kabcore.cpp28
-rw-r--r--kaddressbook/kabcore.h4
-rw-r--r--kaddressbook/kaddressbookmain.cpp4
-rw-r--r--kaddressbook/mainembedded.cpp5
7 files changed, 38 insertions, 12 deletions
diff --git a/bin/kdepim/kaddressbook/germantranslation.txt b/bin/kdepim/kaddressbook/germantranslation.txt
index 293aaea..ece26d2 100644
--- a/bin/kdepim/kaddressbook/germantranslation.txt
+++ b/bin/kdepim/kaddressbook/germantranslation.txt
@@ -719,102 +719,102 @@
{ "Warning","Warnung" },
{ "Select week number","Wähle Wochen Nummer" },
{ "Februar","Februar" },
{ "Pi-Sync options for device: ","Pi-Sync Einstellungen für Gerät: " },
{ "Password for remote access:","Passwort für fernen Zugriff:" },
{ "Remote IP address:","Ferne IP Adresse:" },
{ "Remote port number:","Ferne Port Nummer:" },
{ "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },
{ "Remote from: ","Fern von: " },
{ "Local from: ","Lokal von: " },
{ "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },
{ "Local calendar changed!\n","Lokaler Kalender geändert!\n" },
{ "Write back","Schreibe zurück" },
{ "Pi-Sync succesful!","Pi-Sync erfolgreich!" },
{ "Received sync request","Sync Anfrage erhalten" },
{ "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },
{ "Saving Data to temp file ...","Speichere Daten in temp Datei..." },
{ "Data saved to temp file!","Daten in temp Datei gespeichert!" },
{ "Sending file...","Sende Datei..." },
{ "Waiting for synced file...","Warte auf gesyncte Daten..." },
{ "Receiving synced file...","Gesyncte Daten erhalten..." },
{ "Received %1 bytes","%1 Bytes erhalten" },
{ "Writing file to disk...","Speichere Datei..." },
{ "Pi-Sync successful!","Pi-Sync erfolgreich!" },
{ "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },
{ "Synchronize!","Synchronisiere!" },
{ "High clock skew!","Großer Uhrzeitunterschied!" },
{ "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },
{ "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },
{ "Change search field enable jump bar","Ändere Suchfeld um Jumpbar anzuzeigen" },
{ "Search with '*' prefix (wildcard)","Suche mit '*' Prefix (Wildcard)" },
{ "Shrink searchfield in portrait view","Verkleinere Suchfeld im Portraitmodus" },
{ "Edit new contact","Bearbeite neuen Kontakt" },
{ "Edit ","Bearbeite " },
{ "No contact changed!","Kein Kontakt verändert" },
{ "%1 contacts changed!","%1 Kontakte geändert!" },
{ "Mobile (home)","Handy (Arbeit)" },
{ "Mobile (work)","Handy (Privat)" },
{ "Def.Formatted Name","Def. Format. Name" },
{ "Colors","Farben" },
{ "Alternating background of list views","Abwechselnder Hintergrund für Listen" },
{ "Backup enabled","Backup angeschaltet" },
{ "Use standard backup dir","Standard Backupverzeichnis" },
{ "Number of Backups:","Anzahl der Backups" },
{ "Make backup every ","Mache ein Backup alle " },
{ " days"," Tage" },
{ "Creating backup ... please wait ...","Erzeuge Backup ... bitte warten ..." },
{ "Backup Failed!","Backup Problem!" },
{ "Try again now","Versuche jetzt nochmal" },
{ "Try again later","Versuche später nochmal" },
{ "Try again tomorrow","Versuche morgen nochmal" },
{ "Disable backup","Schalte Backup ab" },
{ "<b>Backup directory does not exist: </b>","<b>Backup Verzeichnis existiert nicht: </b>" },
{ "<b>The backup copy command failed!</b>","<b>Das Backup Kopierkommando is fehlgeschlagen!</b>" },
{ "Choose action","Wähle Aktion" },
{ "&Configure KA/Pi...","Konfiguriere KA/Pi..." },
{ "Global Settings...","Globale Einstellungen..." },
{ "Spouse","Ehegatte" },
{ "Notes","Notizen" },
{ "Messanger","Messanger" },
{ "Assistant","Assistent" },
{ "Manager","Manager" },
{ "Secrecy","Sichtbar" },
{ "male","männlich" },
{ "female","weiblich" },
{ "Hide!","Verbergen!" },
{ "Show!","Anzeigen!" },
{ "Details","Details" },
{ "Search:","Suche:" },
{ "Automatically sync with KDE-Desktop\nwhen receiving sync request","Synce automatisch mit KDE-Desktop\nwenn eine Sync-Anforderung kommt" },
{ "Pi-Sync Port Error","Pi-Sync Port Fehler" },
{ "<b>Enabling Pi-Sync failed!</b> Failed to bind or listen to the port %1! Is another instance already listening to that port?","<b>Anschalten von Pi-Sync fehlgeschlagen!</b> Fehler beim Ansprechen des Ports %1! Ist bereits eine andere Anwendung dabei diesen Port zu nutzen?" },
{ "No valid port number:\n%1","Keine gültige Port Nummer:\n%1" },
{ "Port number (Default: %1)\nValid range from 1 to 65535","Port Nummer (Standard: %1)\nGültiger Bereich von 1 bis 65535" },
{ "Pi-Sync Error","Pi-Sync Fehler" },
{ "Got send file request\nwith invalid password","Erhielt "sende Datei" Anfrage\nmit ungültigem Passwort" },
{ "Got receive file request\nwith invalid password","Erhielt "empfange Datei" Anfrage\nmit ungültigem Passwort" },
{ "Wrong password: Receiving remote file failed.","Falsches Passwort: Empfangen von entfernter Datei fehlgeschlagen." },
{ "Please close error dialog on remote.","Bitte schließe Fehler-Dialog am entfernten Rechner" },
{ "Unknown error on remote.","Unbekannter Fehler am entfernten Rechner" },
{ "Pi-Sync: Connected!","Pi-Sync: Verbunden!" },
{ "Receiving file from remote...","Empfange entfernte Datei..." },
{ "Sending back synced file...","Sende synchronisierte Datei zurück..." },
{ "Do you want to\nclear all sync info\nof all profiles?","Möchten Sie wirklich\ndie Sync-Info\nfür alle Profile\nlöschen?" },
{ "Do you want to\nclear the sync\ninfo of profile\n%1?\n","Möchten Sie wirklich\ndie Sync-Info für Profil\n%1?\nlöschen" },
{ "Sorry, no valid port.Syncing cancelled.","Sorry, kein gültiger Port. Syncing abgebrochen." },
{ "Remote port number:\n(May be: 1 - 65535)","Ferne Port Nummer:\n(Darf sein: 1 - 65535)" },
{ "Writing back file ...","Schreibe Datei zurück..." },
{ "Sending back file ...","Sende Datei zurück..." },
{ "Eeek, there I am ticklish!","Huch, da bin ich kitzlig!" },
{ "Save using LOCAL storage","Speichere nutze LOCAL Pfad" },
{ "...and %1 more\ncontact(s) selected","...und noch %1 Kontakte\n mehr ausgewählt" },
{ "Do you really\nwant to delete the\nsetected contact(s)?\n\n","Möchten Sie wirklich\ndie ausgewählten\nKontakte löschen?\n\n" },
{ "%1 contacts\nsuccessfully\nimported.","%1 Kontakte\nerfolgreich\nimportiert." },
{ "Import this contact?","Importiere diesen Kontakt?" },
{ "Import all!","Importiere alle!" },
-{ "","" },
+{ "Loading addressbook data ... please wait","Lade Adressbuchdaten ... bitte warten" },
{ "","" },
{ "","" },
{ "","" },
{ "","" },
{ "","" }, \ No newline at end of file
diff --git a/kabc/stdaddressbook.cpp b/kabc/stdaddressbook.cpp
index f17f366..a14ae20 100644
--- a/kabc/stdaddressbook.cpp
+++ b/kabc/stdaddressbook.cpp
@@ -20,200 +20,201 @@
/*
Enhanced Version of the file for platform independent KDE tools.
Copyright (c) 2004 Ulf Schenk
$Id$
*/
#include <qdir.h>
#include "resource.h"
#include <kresources/manager.h>
#include <kdebug.h>
#include <klocale.h>
#include <kstaticdeleter.h>
#include <kstandarddirs.h>
#include "stdaddressbook.h"
using namespace KABC;
StdAddressBook *StdAddressBook::mSelf = 0;
bool StdAddressBook::mAutomaticSave = false;
static KStaticDeleter<StdAddressBook> addressBookDeleter;
QString StdAddressBook::fileName()
{
return locateLocal( "data", "kabc/std.vcf" );
}
QString StdAddressBook::directoryName()
{
return locateLocal( "data", "kabc/stdvcf" );
}
void StdAddressBook::handleCrash()
{
StdAddressBook::self()->cleanUp();
}
StdAddressBook *StdAddressBook::self()
{
if ( !mSelf )
{
QString appdir = StdAddressBook::setTempAppDir();
// US im am not sure why I have to use the other format here??
#ifdef KAB_EMBEDDED
mSelf = addressBookDeleter.setObject( new StdAddressBook );
#else //KAB_EMBEDDED
addressBookDeleter.setObject( mSelf, new StdAddressBook );
#endif //KAB_EMBEDDED
KStandardDirs::setAppDir( appdir );
}
return mSelf;
}
QString StdAddressBook::setTempAppDir()
{
QString appDIR = KStandardDirs::appDir();
#ifdef DESKTOP_VERSION
QString appdir = QDir::homeDirPath();
if ( appdir.right(1) == "\\" || appdir.right(1) == "/" )
appdir += "kaddressbook/";
else
appdir += "/kaddressbook/";
KStandardDirs::setAppDir( QDir::convertSeparators( appdir ));
#else
QString appdir = QDir::homeDirPath() + "/kdepim/apps/kaddressbook";
KStandardDirs::setAppDir( appdir );
#endif
return appDIR;
}
StdAddressBook *StdAddressBook::self( bool onlyFastResources )
{
if ( !mSelf )
{
QString appdir =StdAddressBook::setTempAppDir();
#ifdef KAB_EMBEDDED
mSelf = addressBookDeleter.setObject( new StdAddressBook( onlyFastResources ) );
#else //KAB_EMBEDDED
addressBookDeleter.setObject( mSelf, new StdAddressBook( onlyFastResources ) );
#endif //KAB_EMBEDDED
KStandardDirs::setAppDir( appdir );
}
return mSelf;
}
StdAddressBook::StdAddressBook()
: AddressBook( "kabcrc" )
{
- init( false );
+ //init( false );
}
StdAddressBook::StdAddressBook( bool onlyFastResources )
: AddressBook( "kabcrc" )
{
- init( onlyFastResources );
+ if ( onlyFastResources )
+ init( onlyFastResources );
}
StdAddressBook::~StdAddressBook()
{
if ( mAutomaticSave )
save();
}
void StdAddressBook::init( bool )
{
KRES::Manager<Resource> *manager = resourceManager();
KRES::Manager<Resource>::ActiveIterator it;
for ( it = manager->activeBegin(); it != manager->activeEnd(); ++it ) {
(*it)->setAddressBook( this );
if ( !(*it)->open() )
error( QString( "Unable to open resource '%1'!" ).arg( (*it)->resourceName() ) );
}
Resource *res = standardResource();
if ( !res ) {
res = manager->createResource( "file" );
if ( res )
{
addResource( res );
}
else
qDebug(" No resource available!!!");
}
setStandardResource( res );
manager->writeConfig();
load();
}
bool StdAddressBook::save()
{
kdDebug(5700) << "StdAddressBook::save()" << endl;
bool ok = true;
AddressBook *ab = self();
ab->deleteRemovedAddressees();
Iterator ait;
for ( ait = ab->begin(); ait != ab->end(); ++ait ) {
if ( !(*ait).IDStr().isEmpty() ) {
(*ait).insertCustom( "KADDRESSBOOK", "X-ExternalID", (*ait).IDStr() );
}
}
KRES::Manager<Resource>::ActiveIterator it;
KRES::Manager<Resource> *manager = ab->resourceManager();
for ( it = manager->activeBegin(); it != manager->activeEnd(); ++it ) {
if ( !(*it)->readOnly() && (*it)->isOpen() ) {
Ticket *ticket = ab->requestSaveTicket( *it );
// qDebug("StdAddressBook::save '%s'", (*it)->resourceName().latin1() );
if ( !ticket ) {
ab->error( i18n( "Unable to save to resource '%1'. It is locked." )
.arg( (*it)->resourceName() ) );
return false;
}
if ( !ab->save( ticket ) )
ok = false;
}
}
return ok;
}
void StdAddressBook::close()
{
//US destructObject is not defined on my system???. Is setObject(0) the same ???
//US addressBookDeleter.destructObject();
addressBookDeleter.setObject(0);
}
void StdAddressBook::setAutomaticSave( bool enable )
{
mAutomaticSave = enable;
}
bool StdAddressBook::automaticSave()
{
return mAutomaticSave;
}
// should get const for 4.X
Addressee StdAddressBook::whoAmI()
{
//US KConfig config( "kabcrc" );
KConfig config( locateLocal("config", "kabcrc") );
config.setGroup( "General" );
return findByUid( config.readEntry( "WhoAmI" ) );
diff --git a/kabc/stdaddressbook.h b/kabc/stdaddressbook.h
index 9ec53b0..cf130b3 100644
--- a/kabc/stdaddressbook.h
+++ b/kabc/stdaddressbook.h
@@ -41,111 +41,111 @@ namespace KABC {
It's implemented as a singleton. Use @ref self() to get the address book
object. On the first self() call the address book also gets loaded.
Example:
<pre>
KABC::AddressBook *ab = KABC::StdAddressBook::self();
KABC::AddressBook::Iterator it;
for ( it = ab->begin(); it != ab->end(); ++it ) {
kdDebug() << "UID=" << (*it).uid() << endl;
// do some other stuff
}
KABC::StdAddressBook::save();
</pre>
*/
class StdAddressBook : public AddressBook
{
public:
/**
Destructor.
*/
~StdAddressBook();
/**
Return the standard addressbook object. It also loads slow resources.
It is the same as self(false); .
*/
static StdAddressBook *self();
/**
This is the same as above, but with specified
behaviour of resource loading.
@param onlyFastResource Only resources marked as 'fast' should be loaded
*/
// FIXME for KDE4 return StdAddressBook and merge with the metod above -zecke
static StdAddressBook *self( bool onlyFastResources );
/**
Save the standard address book to disk.
*/
static bool save();
/**
Call this method in your crash handler to allow the library clean up
possible locks.
*/
static void handleCrash();
/**
Returns the default file name for vcard-based addressbook
*/
static QString fileName();
/**
Returns the default directory name for vcard-based addressbook
*/
static QString directoryName();
/**
Set the automatic save property of the address book.
If @p enable is TRUE (default) the address book is saved at
destruction time otherwise you have to call @ref save() to
explicitely save it.
*/
static void setAutomaticSave( bool enable );
/**
Closes the address book. Depending on @ref automaticSave() it will
save the address book first.
*/
static void close();
/**
Returns whether the address book is saved at destruction time.
See also @ref setAutomaticSave().
*/
static bool automaticSave();
/**
Returns the contact, that is associated with the owner of the
address book. This contact should be used by other programs
to access user specific data.
*/
Addressee whoAmI();
/**
Sets the users contact. See @ref whoAmI() for more information.
@param uid The uid of the users contact.
*/
void setWhoAmI( const Addressee &addr );
+ void init( bool onlyFastResources );
protected:
StdAddressBook();
StdAddressBook( bool onlyFastResources );
- void init( bool onlyFastResources );
private:
static QString setTempAppDir();
static StdAddressBook *mSelf;
static bool mAutomaticSave;
};
}
#endif
diff --git a/kaddressbook/kabcore.cpp b/kaddressbook/kabcore.cpp
index b9830b1..c670b1f 100644
--- a/kaddressbook/kabcore.cpp
+++ b/kaddressbook/kabcore.cpp
@@ -310,195 +310,218 @@ KABCore::KABCore( KXMLGUIClient *client, bool readWrite, QWidget *parent, const
mAddressBook->setErrorHandler( new KABC::GUIErrorHandler );
#endif //KAB_EMBEDDED
connect( mAddressBook, SIGNAL( addressBookChanged( AddressBook * ) ),
SLOT( addressBookChanged() ) );
#if 0
// LR moved to addressbook init method
mAddressBook->addCustomField( i18n( "Department" ), KABC::Field::Organization,
"X-Department", "KADDRESSBOOK" );
mAddressBook->addCustomField( i18n( "Profession" ), KABC::Field::Organization,
"X-Profession", "KADDRESSBOOK" );
mAddressBook->addCustomField( i18n( "Assistant's Name" ), KABC::Field::Organization,
"X-AssistantsName", "KADDRESSBOOK" );
mAddressBook->addCustomField( i18n( "Manager's Name" ), KABC::Field::Organization,
"X-ManagersName", "KADDRESSBOOK" );
mAddressBook->addCustomField( i18n( "Spouse's Name" ), KABC::Field::Personal,
"X-SpousesName", "KADDRESSBOOK" );
mAddressBook->addCustomField( i18n( "Office" ), KABC::Field::Personal,
"X-Office", "KADDRESSBOOK" );
mAddressBook->addCustomField( i18n( "IM Address" ), KABC::Field::Personal,
"X-IMAddress", "KADDRESSBOOK" );
mAddressBook->addCustomField( i18n( "Anniversary" ), KABC::Field::Personal,
"X-Anniversary", "KADDRESSBOOK" );
//US added this field to become compatible with Opie/qtopia addressbook
// values can be "female" or "male" or "". An empty field represents undefined.
mAddressBook->addCustomField( i18n( "Gender" ), KABC::Field::Personal,
"X-Gender", "KADDRESSBOOK" );
mAddressBook->addCustomField( i18n( "Children" ), KABC::Field::Personal,
"X-Children", "KADDRESSBOOK" );
mAddressBook->addCustomField( i18n( "FreeBusyUrl" ), KABC::Field::Personal,
"X-FreeBusyUrl", "KADDRESSBOOK" );
#endif
initGUI();
mIncSearchWidget->setFocus();
connect( mViewManager, SIGNAL( selected( const QString& ) ),
SLOT( setContactSelected( const QString& ) ) );
connect( mViewManager, SIGNAL( executed( const QString& ) ),
SLOT( executeContact( const QString& ) ) );
connect( mViewManager, SIGNAL( deleteRequest( ) ),
SLOT( deleteContacts( ) ) );
connect( mViewManager, SIGNAL( modified() ),
SLOT( setModified() ) );
connect( mExtensionManager, SIGNAL( modified( const KABC::Addressee::List& ) ), this, SLOT( extensionModified( const KABC::Addressee::List& ) ) );
connect( mExtensionManager, SIGNAL( changedActiveExtension( int ) ), this, SLOT( extensionChanged( int ) ) );
connect( mXXPortManager, SIGNAL( modified() ),
SLOT( setModified() ) );
connect( mJumpButtonBar, SIGNAL( jumpToLetter( const QString& ) ),
SLOT( incrementalSearchJump( const QString& ) ) );
connect( mIncSearchWidget, SIGNAL( fieldChanged() ),
mJumpButtonBar, SLOT( recreateButtons() ) );
connect( mDetails, SIGNAL( sendEmail( const QString& ) ),
SLOT( sendMail( const QString& ) ) );
connect( ExternalAppHandler::instance(), SIGNAL (requestForNameEmailUidList(const QString&, const QString&)),this, SLOT(requestForNameEmailUidList(const QString&, const QString&)));
connect( ExternalAppHandler::instance(), SIGNAL (requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&)),this, SLOT(requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&)));
connect( ExternalAppHandler::instance(), SIGNAL (requestForBirthdayList(const QString&, const QString&)),this, SLOT(requestForBirthdayList(const QString&, const QString&)));
connect( ExternalAppHandler::instance(), SIGNAL (nextView()),this, SLOT(setDetailsToggle()));
connect( ExternalAppHandler::instance(), SIGNAL (doRingSync()),this, SLOT( doRingSync()));
connect( ExternalAppHandler::instance(), SIGNAL (callContactdialog()),this, SLOT(callContactdialog()));
#ifndef KAB_EMBEDDED
connect( mViewManager, SIGNAL( urlDropped( const KURL& ) ),
mXXPortManager, SLOT( importVCard( const KURL& ) ) );
connect( mDetails, SIGNAL( browse( const QString& ) ),
SLOT( browse( const QString& ) ) );
mAddressBookService = new KAddressBookService( this );
#endif //KAB_EMBEDDED
mMessageTimer = new QTimer( this );
connect( mMessageTimer, SIGNAL( timeout() ), this, SLOT( setCaptionBack() ) );
mEditorDialog = 0;
createAddresseeEditorDialog( this );
setModified( false );
mBRdisabled = false;
#ifndef DESKTOP_VERSION
infrared = 0;
#endif
//toggleBeamReceive( );
mMainWindow->toolBar()->show();
// we have a toolbar repainting error on the Zaurus when starting KA/Pi
- QTimer::singleShot( 10, this , SLOT ( updateToolBar()));
+ //QTimer::singleShot( 10, this , SLOT ( updateToolBar()));
+ QTimer::singleShot( 100, this, SLOT ( loadDataAfterStart() ));
+}
+void KABCore::receiveStart( const QCString& cmsg, const QByteArray& data )
+{
+ qDebug("KO: QCOP start message received: %s ", cmsg.data() );
+ mCStringMess = cmsg;
+ mByteData = data;
}
+void KABCore::loadDataAfterStart()
+{
+ qDebug("KABCore::loadDataAfterStart() ");
+ ((StdAddressBook*)mAddressBook)->init( true );
+ mViewManager->refreshView();
+
+#ifndef DESKTOP_VERSION
+ disconnect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), this, SLOT (receiveStart ( const QCString &, const QByteArray & )));
+
+ QObject::connect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), ExternalAppHandler::instance(), SLOT (appMessage ( const QCString &, const QByteArray & )));
+ if ( !mCStringMess.isEmpty() )
+ ExternalAppHandler::instance()->appMessage( mCStringMess, mByteData );
+#endif
+ QTimer::singleShot( 10, this , SLOT ( updateToolBar()));
+ setCaptionBack();
+}
void KABCore::updateToolBar()
{
static int iii = 0;
++iii;
mMainWindow->toolBar()->repaintMe();
if ( iii < 4 )
QTimer::singleShot( 100*iii, this , SLOT ( updateToolBar()));
}
KABCore::~KABCore()
{
// save();
//saveSettings();
//KABPrefs::instance()->writeConfig();
delete AddresseeConfig::instance();
mAddressBook = 0;
KABC::StdAddressBook::close();
delete syncManager;
#ifndef DESKTOP_VERSION
if ( infrared )
delete infrared;
#endif
}
void KABCore::receive( const QCString& cmsg, const QByteArray& data )
{
//qDebug("KA: QCOP message received: %s ", cmsg.data() );
if ( cmsg == "setDocument(QString)" ) {
QDataStream stream( data, IO_ReadOnly );
QString fileName;
stream >> fileName;
recieve( fileName );
return;
}
}
void KABCore::toggleBeamReceive( )
{
if ( mBRdisabled )
return;
#ifndef DESKTOP_VERSION
if ( infrared ) {
qDebug("KA: AB disable BeamReceive ");
delete infrared;
infrared = 0;
mActionBR->setChecked(false);
return;
}
qDebug("KA: AB enable BeamReceive ");
mActionBR->setChecked(true);
infrared = new QCopChannel("QPE/Application/addressbook",this, "channelAB" ) ;
QObject::connect( infrared, SIGNAL (received ( const QCString &, const QByteArray & )),this, SLOT(receive( const QCString&, const QByteArray& )));
#endif
}
void KABCore::disableBR(bool b)
{
#ifndef DESKTOP_VERSION
if ( b ) {
if ( infrared ) {
toggleBeamReceive( );
}
mBRdisabled = true;
} else {
if ( mBRdisabled ) {
mBRdisabled = false;
//toggleBeamReceive( );
}
}
#endif
}
void KABCore::recieve( QString fn )
{
//qDebug("KABCore::recieve ");
int count = mAddressBook->importFromFile( fn, true );
if ( count )
setModified( true );
mViewManager->refreshView();
message(i18n("%1 contact(s) received!").arg( count ));
topLevelWidget()->showMaximized();
topLevelWidget()->raise();
}
void KABCore::restoreSettings()
{
mMultipleViewsAtOnce = KABPrefs::instance()->mMultipleViewsAtOnce;
bool state;
if (mMultipleViewsAtOnce)
state = KABPrefs::instance()->mDetailsPageVisible;
else
state = false;
mActionDetails->setChecked( state );
setDetailsVisible( state );
@@ -2352,245 +2375,242 @@ void KABCore::addActionsManually()
#endif //KAB_EMBEDDED
mActionExport2phone->plug( ExportMenu );
connect ( syncMenu, SIGNAL( activated ( int ) ), syncManager, SLOT (slotSyncMenu( int ) ) );
syncManager->fillSyncMenu();
}
void KABCore::showLicence()
{
KApplication::showLicence();
}
void KABCore::manageCategories( )
{
KABCatPrefs* cp = new KABCatPrefs();
cp->show();
int w =cp->sizeHint().width() ;
int h = cp->sizeHint().height() ;
int dw = QApplication::desktop()->width();
int dh = QApplication::desktop()->height();
cp->setGeometry( (dw-w)/2, (dh - h )/2 ,w,h );
if ( !cp->exec() ) {
delete cp;
return;
}
int count = 0;
int cc = 0;
message( i18n("Please wait, processing categories..."));
if ( cp->addCat() ) {
KABC::AddressBook::Iterator it;
QStringList catList = KABPrefs::instance()->mCustomCategories;
for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) {
++cc;
if ( cc %10 == 0)
message(i18n("Processing contact #%1").arg(cc));
QStringList catIncList = (*it).categories();
int i;
for( i = 0; i< catIncList.count(); ++i ) {
if ( !catList.contains (catIncList[i])) {
catList.append( catIncList[i] );
//qDebug("add cat %s ", catIncList[i].latin1());
++count;
}
}
}
catList.sort();
KABPrefs::instance()->mCustomCategories = catList;
KABPrefs::instance()->writeConfig();
message(QString::number( count )+ i18n(" categories added to list! "));
} else {
QStringList catList = KABPrefs::instance()->mCustomCategories;
QStringList catIncList;
QStringList newCatList;
KABC::AddressBook::Iterator it;
for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) {
++cc;
if ( cc %10 == 0)
message(i18n("Processing contact #%1").arg(cc));
QStringList catIncList = (*it).categories();
int i;
if ( catIncList.count() ) {
newCatList.clear();
for( i = 0; i< catIncList.count(); ++i ) {
if ( catList.contains (catIncList[i])) {
newCatList.append( catIncList[i] );
}
}
newCatList.sort();
(*it).setCategories( newCatList );
mAddressBook->insertAddressee( (*it) );
}
}
setModified( true );
mViewManager->refreshView();
message( i18n("Removing categories done!"));
}
delete cp;
}
void KABCore::removeVoice()
{
if ( KMessageBox::questionYesNo( this, i18n("After importing, phone numbers\nmay have two or more types.\n(E.g. work+voice)\nThese numbers are shown as \"other\".\nClick Yes to remove the voice type\nfrom numbers with more than one type.\n\nRemove voice type?") ) == KMessageBox::No )
return;
XXPortSelectDialog dlg( this, false, this );
if ( !dlg.exec() )
return;
mAddressBook->setUntagged();
dlg.tagSelected();
message(i18n("Removing voice..."), false );
KABC::AddressBook::Iterator it;
for ( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) {
if ( (*it).tagged() ) {
(*it).removeVoice();
}
}
message(i18n("Refreshing view...") );
- qApp->processEvents();
mViewManager->refreshView( "" );
Addressee add;
mDetails->setAddressee( add );
message(i18n("Remove voice completed!") );
}
void KABCore::setFormattedName()
{
KABFormatPrefs setpref;
if ( !setpref.exec() ) {
return;
}
XXPortSelectDialog dlg( this, false, this );
if ( !dlg.exec() )
return;
mAddressBook->setUntagged();
dlg.tagSelected();
int count = 0;
KABC::AddressBook::Iterator it;
bool modified = false;
for ( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) {
if ( (*it).tagged() ) {
if ( (*it).uid().left( 2 ) == "la" )
if ( (*it).uid().left( 19 ) == QString("last-syncAddressee-") )
continue;
++count;
if ( count %10 == 0 )
message(i18n("Changing contact #%1").arg( count ) );
- qApp->processEvents();
QString fName;
if ( setpref.simple->isChecked() )
fName = NameEditDialog::formattedName( (*it), NameEditDialog::SimpleName );
else if ( setpref.full->isChecked() )
fName = NameEditDialog::formattedName( (*it), NameEditDialog::FullName );
else if ( setpref.reverse->isChecked() )
fName = NameEditDialog::formattedName( (*it), NameEditDialog::ReverseName );
else
fName = (*it).organization();
if ( setpref.setCompany->isChecked() )
if ( fName.isEmpty() || fName =="," )
fName = (*it).organization();
(*it).setFormattedName( fName );
(*it).setChanged( true );
modified = true;
(*it).setRevision( QDateTime::currentDateTime() );
}
}
message(i18n("Refreshing view...") );
- qApp->processEvents();
if ( modified )
setModified( true );
Addressee add;
mDetails->setAddressee( add );
if ( count == 0 )
message(i18n("No contact changed!") );
else
message(i18n("%1 contacts changed!").arg( count ) );
}
void KABCore::clipboardDataChanged()
{
if ( mReadWrite )
mActionPaste->setEnabled( !QApplication::clipboard()->text().isEmpty() );
}
void KABCore::updateActionMenu()
{
UndoStack *undo = UndoStack::instance();
RedoStack *redo = RedoStack::instance();
if ( undo->isEmpty() )
mActionUndo->setText( i18n( "Undo" ) );
else
mActionUndo->setText( i18n( "Undo %1" ).arg( undo->top()->name() ) );
mActionUndo->setEnabled( !undo->isEmpty() );
if ( !redo->top() )
mActionRedo->setText( i18n( "Redo" ) );
else
mActionRedo->setText( i18n( "Redo %1" ).arg( redo->top()->name() ) );
mActionRedo->setEnabled( !redo->isEmpty() );
}
void KABCore::configureKeyBindings()
{
#ifndef KAB_EMBEDDED
KKeyDialog::configure( actionCollection(), true );
#else //KAB_EMBEDDED
qDebug("KABCore::configureKeyBindings() not implemented");
#endif //KAB_EMBEDDED
}
#ifdef KAB_EMBEDDED
void KABCore::configureResources()
{
KRES::KCMKResources dlg( this, "" , 0 );
if ( !dlg.exec() )
return;
KMessageBox::information( this, i18n("Please restart to get the \nchanged resources (re)loaded!\n") );
}
#endif //KAB_EMBEDDED
/* this method will be called through the QCop interface from Ko/Pi to select addresses
* for the attendees list of an event.
*/
void KABCore::requestForNameEmailUidList(const QString& sourceChannel, const QString& uid)
{
qDebug("KABCore::requestForNameEmailUidList ");
bool ok = false;
mEmailSourceChannel = sourceChannel;
mEmailSourceUID = uid;
QTimer::singleShot( 10,this, SLOT ( callContactdialog() ) );
//callContactdialog();
#if 0
int wid = uid.toInt( &ok );
qDebug("UID %s ", uid.latin1());
if ( ok ) {
if ( wid != QApplication::desktop()->width() ) {
qDebug("KA/Pi: Request from different desktop geometry. Resizing ...");
message( i18n("Resizing, please wait...") );
mMainWindow->showMinimized();
/*
{
QCopEnvelope e("QPE/Application/kapi", "callContactdialog()");
}
*/
QTimer::singleShot( 1,this, SLOT ( resizeAndCallContactdialog() ) );
return;
}
} else {
qDebug("KABCore::requestForNameEmailUidList:: Got invalid uid ");
}
callContactdialog();
//QCopEnvelope e("QPE/Application/kapi", "callContactdialog()");
#endif
}
void KABCore::resizeAndCallContactdialog()
{
diff --git a/kaddressbook/kabcore.h b/kaddressbook/kabcore.h
index ceeeda7..42b7709 100644
--- a/kaddressbook/kabcore.h
+++ b/kaddressbook/kabcore.h
@@ -261,230 +261,234 @@ class KABCore : public QWidget, public KSyncInterface
*/
void setModified();
/**
Marks the address book as modified without refreshing the view.
*/
void setModifiedWOrefresh();
/**
Marks the address book as modified concerning the argument.
*/
void setModified( bool modified );
/**
Returns whether the address book is modified.
*/
bool modified() const;
/**
Called whenever an contact is modified in the contact editor
dialog or the quick edit.
*/
void contactModified( const KABC::Addressee &addr );
void addrModified( const KABC::Addressee &addr, bool updateDetails = true );
/**
DCOP METHODS.
*/
void addEmail( QString addr );
void importVCard( const KURL& url, bool showPreview );
void importVCard( const QString& vCard, bool showPreview );
void newContact();
QString getNameByPhone( const QString& phone );
/**
END DCOP METHODS
*/
/**
Saves the contents of the AddressBook back to disk.
*/
void save();
/**
Undos the last command using the undo stack.
*/
void undo();
/**
Redos the last command that was undone, using the redo stack.
*/
void redo();
/**
Shows the edit dialog for the given uid. If the uid is QString::null,
the method will try to find a selected addressee in the view.
*/
void editContact( const QString &uid /*US = QString::null*/ );
//US added a second method without defaultparameter
void editContact2();
/**
Shows or edits the detail view for the given uid. If the uid is QString::null,
the method will try to find a selected addressee in the view.
*/
void executeContact( const QString &uid /*US = QString::null*/ );
/**
Launches the configuration dialog.
*/
void openConfigDialog();
void openConfigGlobalDialog();
/**
Launches the ldap search dialog.
*/
void openLDAPDialog();
/**
Creates a KAddressBookPrinter, which will display the print
dialog and do the printing.
*/
void print();
/**
Registers a new GUI client, so plugins can register its actions.
*/
void addGUIClient( KXMLGUIClient *client );
void requestForNameEmailUidList(const QString& sourceChannel, const QString& sessionuid);
void requestForDetails(const QString& sourceChannel, const QString& sessionuid, const QString& name, const QString& email, const QString& uid);
void requestForBirthdayList(const QString& sourceChannel, const QString& sessionuid);
signals:
void contactSelected( const QString &name );
void contactSelected( const QPixmap &pixmap );
public slots:
+ void loadDataAfterStart();
void recieve(QString cmsg );
void getFile( bool success );
void syncFileRequest();
void setDetailsVisible( bool visible );
void setDetailsToState();
void saveSettings();
private slots:
void updateToolBar();
void updateMainWindow();
void receive( const QCString& cmsg, const QByteArray& data );
+ void receiveStart( const QCString& cmsg, const QByteArray& data );
void toggleBeamReceive( );
void disableBR(bool);
void setJumpButtonBarVisible( bool visible );
void setJumpButtonBar( bool visible );
void setCaptionBack();
void resizeAndCallContactdialog();
void callContactdialog();
void doRingSync();
void importFromOL();
void extensionModified( const KABC::Addressee::List &list );
void extensionChanged( int id );
void clipboardDataChanged();
void updateActionMenu();
void configureKeyBindings();
void removeVoice();
void setFormattedName();
#ifdef KAB_EMBEDDED
void configureResources();
#endif //KAB_EMBEDDED
void slotEditorDestroyed( const QString &uid );
void configurationChanged();
void addressBookChanged();
private:
+ QCString mCStringMess;
+ QByteArray mByteData;
QString mEmailSourceChannel;
QString mEmailSourceUID;
void resizeEvent(QResizeEvent* e );
bool mBRdisabled;
#ifndef DESKTOP_VERSION
QCopChannel* infrared;
#endif
QTimer *mMessageTimer;
void initGUI();
void initActions();
QString getPhoneFile();
AddresseeEditorDialog *createAddresseeEditorDialog( QWidget *parent,
const char *name = 0 );
KXMLGUIClient *mGUIClient;
KABC::AddressBook *mAddressBook;
ViewManager *mViewManager;
// QSplitter *mDetailsSplitter;
KDGanttMinimizeSplitter *mExtensionBarSplitter;
ViewContainer *mDetails;
KDGanttMinimizeSplitter* mMiniSplitter;
XXPortManager *mXXPortManager;
JumpButtonBar *mJumpButtonBar;
IncSearchWidget *mIncSearchWidget;
ExtensionManager *mExtensionManager;
KCMultiDialog *mConfigureDialog;
#ifndef KAB_EMBEDDED
LDAPSearchDialog *mLdapSearchDialog;
#endif //KAB_EMBEDDED
// QDict<AddresseeEditorDialog> mEditorDict;
AddresseeEditorDialog *mEditorDialog;
bool mReadWrite;
bool mModified;
bool mIsPart;
bool mMultipleViewsAtOnce;
//US file menu
KAction *mActionMail;
KAction *mActionBeam;
KToggleAction *mActionBR;
KAction *mActionExport2phone;
KAction* mActionPrint;
KAction* mActionPrintDetails;
KAction* mActionNewContact;
KAction *mActionSave;
KAction *mActionEditAddressee;
KAction *mActionMailVCard;
KAction *mActionBeamVCard;
KAction *mActionQuit;
//US edit menu
KAction *mActionCopy;
KAction *mActionCut;
KAction *mActionPaste;
KAction *mActionSelectAll;
KAction *mActionUndo;
KAction *mActionRedo;
KAction *mActionDelete;
//US settings menu
KAction *mActionConfigResources;
KAction *mActionConfigGlobal;
KAction *mActionConfigKAddressbook;
KAction *mActionConfigShortcuts;
KAction *mActionConfigureToolbars;
KAction *mActionKeyBindings;
KToggleAction *mActionJumpBar;
KToggleAction *mActionDetails;
KAction *mActionWhoAmI;
KAction *mActionCategories;
KAction *mActionEditCategories;
KAction *mActionManageCategories;
KAction *mActionAboutKAddressbook;
KAction *mActionLicence;
KAction *mActionFaq;
KAction *mActionWN;
KAction *mActionSyncHowto;
KAction *mActionStorageHowto;
KAction *mActionKdeSyncHowto;
KAction *mActionMultiSyncHowto;
KAction *mActionDeleteView;
QPopupMenu *viewMenu;
QPopupMenu *filterMenu;
QPopupMenu *settingsMenu;
QPopupMenu *changeMenu;
QPopupMenu *beamMenu;
//US QAction *mActionSave;
diff --git a/kaddressbook/kaddressbookmain.cpp b/kaddressbook/kaddressbookmain.cpp
index 519dc92..8fe3ee0 100644
--- a/kaddressbook/kaddressbookmain.cpp
+++ b/kaddressbook/kaddressbookmain.cpp
@@ -1,183 +1,185 @@
/*
This file is part of KAddressbook.
Copyright (c) 1999 Don Sanders <dsanders@kde.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
As a special exception, permission is given to link this program
with any edition of Qt, and distribute the resulting executable,
without including the source code for Qt in the source distribution.
*/
#ifdef KAB_EMBEDDED
#include "kabprefs.h"
#include <kglobal.h>
#include <qmessagebox.h>
#include <qtoolbar.h>
#include <qapplication.h>
#else //KAB_EMBEDDED
#include <kedittoolbar.h>
#include <kkeydialog.h>
#include <kmessagebox.h>
#include <kstatusbar.h>
#endif //KAB_EMBEDDED
#include <klocale.h>
#include "kabcore.h"
#include "kaddressbookmain.h"
#include "kactioncollection.h"
#ifdef KAB_EMBEDDED
KAddressBookMain::KAddressBookMain() : KMainWindow( 0, "adrressbook" )
#else //KAB_EMBEDDED
//MOC_SKIP_BEGIN
KAddressBookMain::KAddressBookMain() : DCOPObject( "KAddressBookIface" ), KMainWindow( 0 )
//MOC_SKIP_END
#endif //KAB_EMBEDDED
{
setIcon(SmallIcon( "ka24" ) );
#if 0
//US for embedded systems, create the toolbar before we initiate KABCore.
// KABCore will fill the toolbar with menues and icons
QMainWindow::ToolBarDock tbd;
tbd = Top;
iconToolBar = new QToolBar( this );
addToolBar (iconToolBar , tbd );
iconToolBar->setHorizontalStretchable(true);
//US iconToolBar->setWidth(300);
#endif // 0
mCore = new KABCore( this, true, this );
#ifdef KAB_EMBEDDED
setCaption( i18n( "KAddressbook/Pi" ) );
#else //KAB_EMBEDDED
setCaption( i18n( "Address Book Browser" ) );
#endif //KAB_EMBEDDED
//mCore->restoreSettings();
initActions();
setCentralWidget( mCore );
//US statusBar()->show();
#ifndef KAB_EMBEDDED
setStandardToolBarMenuEnabled(true);
createGUI( "kaddressbookui.rc", false );
#endif //KAB_EMBEDDED
setAutoSaveSettings();
- qApp->processEvents();
mCore->restoreSettings();
+#ifndef DESKTOP_VERSION
+ QObject::connect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), mCore, SLOT (receiveStart ( const QCString &, const QByteArray & )));
+#endif
}
KAddressBookMain::~KAddressBookMain()
{
// mCore->saveSettings();
}
void KAddressBookMain::showMinimized ()
{
QWidget::showMinimized () ;
}
void KAddressBookMain::addEmail( QString addr )
{
mCore->addEmail( addr );
}
#ifndef KAB_EMBEDDED
ASYNC KAddressBookMain::showContactEditor( QString uid )
{
mCore->editContact( uid );
}
#endif //KAB_EMBEDDED
void KAddressBookMain::newContact()
{
mCore->newContact();
}
QString KAddressBookMain::getNameByPhone( QString phone )
{
return mCore->getNameByPhone( phone );
}
void KAddressBookMain::save()
{
mCore->save();
}
void KAddressBookMain::exit()
{
close( );
}
void KAddressBookMain::saveProperties( KConfig* )
{
}
void KAddressBookMain::readProperties( KConfig* )
{
}
void KAddressBookMain::initActions()
{
#ifndef KAB_EMBEDDED
KStdAction::quit( this, SLOT( close() ), actionCollection() );
KStdAction::configureToolbars( this, SLOT( configureToolbars() ), actionCollection() );
#else //KAB_EMBEDDED
//US: transfered the setup of the actions into KABCore
#endif //KAB_EMBEDDED
}
//US new method to setup menues and toolbars on embedded systems
#ifdef KAB_EMBEDDED
/*
QToolBar * KAddressBookMain::getIconToolBar()
{
return iconToolBar;
}
*/
void KAddressBookMain::createGUI()
{
}
#endif //KAB_EMBEDDED
void KAddressBookMain::configureToolbars()
{
#ifndef KAB_EMBEDDED
saveMainWindowSettings( KGlobal::config(), "MainWindow" );
KEditToolbar dlg( factory() );
connect( &dlg, SIGNAL( newToolbarConfig() ), SLOT( slotNewToolbarConfig() ) );
dlg.exec();
#else //KAB_EMBEDDED
qDebug("KAddressBookMain::configureToolbars() not implemented by ulf" );
#endif //KAB_EMBEDDED
}
void KAddressBookMain::slotNewToolbarConfig()
{
#ifndef KAB_EMBEDDED
diff --git a/kaddressbook/mainembedded.cpp b/kaddressbook/mainembedded.cpp
index 93ba53c..2f3531d 100644
--- a/kaddressbook/mainembedded.cpp
+++ b/kaddressbook/mainembedded.cpp
@@ -1,120 +1,119 @@
#ifndef DESKTOP_VERSION
#include <qpe/qpeapplication.h>
#include <qcopchannel_qws.h>
#include <stdlib.h>
#else
#include <qapplication.h>
#include <qwindowsstyle.h>
#include <qplatinumstyle.h>
#include <qmainwindow.h>
#include <qmessagebox.h>
#include <stdlib.h>
#endif
#include <qtextcodec.h>
#include <kstandarddirs.h>
#include <qregexp.h>
#include <kglobal.h>
#include <stdio.h>
#include <qdir.h>
#include "kabprefs.h"
#include "kaddressbookmain.h"
#include "externalapphandler.h"
#include <libkdepim/kpimglobalprefs.h>
void dumpMissing();
int main( int argc, char **argv )
{
#ifndef DESKTOP_VERSION
QPEApplication a( argc, argv );
a.setKeepRunning ();
#else
QApplication a( argc, argv );
QApplication::setStyle( new QPlatinumStyle ());
#ifdef _WIN32_
QString hdir ( getenv( "HOME") );
if ( hdir.isEmpty() ) {
QString hd ("C:/" );
//QMessageBox::information(0,"hh",QDir::homeDirPath()+" xx" +hd );
if ( QDir::homeDirPath().lower() == hd.lower() ) {
_putenv( "HOME=C:");
//QMessageBox::information(0,"hh",QString ( getenv( "HOME") ) );
}
} else {
QDir app_dir;
if ( !app_dir.exists(hdir) )
app_dir.mkdir (hdir);
}
#endif
#endif
bool exitHelp = false;
if ( argc > 1 ) {
QString command = argv[1];
if ( command == "-help" ){
printf("KA/E command line commands:\n");
printf(" no command: Start KA/E in usual way\n");
printf(" -help: This output\n");
printf(" KA/E is exiting now. Bye!\n");
exitHelp = true;
}
}
if ( ! exitHelp ) {
KGlobal::setAppName( "kaddressbook" );
#ifndef DESKTOP_VERSION
if ( QApplication::desktop()->width() > 320 )
KGlobal::iconLoader()->setIconPath(QString(getenv("QPEDIR"))+"/pics/kdepim/kaddressbook/icons22/");
else
KGlobal::iconLoader()->setIconPath(QString(getenv("QPEDIR"))+"/pics/kdepim/kaddressbook/icons16/");
#else
QString fileName ;
fileName = qApp->applicationDirPath () + "/kdepim/kaddressbook/icons22/";
KGlobal::iconLoader()->setIconPath(QDir::convertSeparators(fileName));
QApplication::addLibraryPath ( qApp->applicationDirPath () );
#endif
KStandardDirs::setAppDir( QDir::convertSeparators(locateLocal("data", "kaddressbook")));
// init language
KPimGlobalPrefs::instance()->setGlobalConfig();
QApplication::setFont( KPimGlobalPrefs::instance()->mApplicationFont );
KAddressBookMain m ;
//US MainWindow m;
-#ifndef DESKTOP_VERSION
- QObject::connect(&a, SIGNAL (appMessage ( const QCString &, const QByteArray & )), ExternalAppHandler::instance(), SLOT (appMessage ( const QCString &, const QByteArray & )));
-#endif
+
#ifndef DESKTOP_VERSION
a.showMainWidget( &m );
#else
a.setMainWidget( &m );
m.show();
#endif
+ m.setCaption(i18n("Loading addressbook data ... please wait" ));
a.exec();
#ifdef DESKTOP_VERSION
KConfig *config = KABPrefs::instance()->getConfig();
config->setGroup("WidgetLayout");
QStringList list ;//= config->readListEntry("MainLayout");
int x,y,w,h;
QWidget* wid;
wid = &m;
x = wid->geometry().x();
y = wid->geometry().y();
w = wid->width();
h = wid->height();
list.clear();
list << QString::number( x );
list << QString::number( y );
list << QString::number( w );
list << QString::number( h );
config->writeEntry("MainLayout",list );
config->sync();
#endif
dumpMissing();
KPimGlobalPrefs::instance()->writeConfig();
}
qDebug("KA: Bye! ");
}