3 files changed, 59 insertions, 23 deletions

diff --git a/bin/kdepim/WhatsNew.txt b/bin/kdepim/WhatsNew.txt
index 27d37c4..ea49c2c 100644
--- a/bin/kdepim/WhatsNew.txt
+++ b/bin/kdepim/WhatsNew.txt
@@ -3,10 +3,43 @@ Info about the changes in new versions of KDE-Pim/Pi
 ********** VERSION 2.1.13 ************
 
 Fixed a problem in KA/Pi search.
 Fixed some minor problems in KO/Pi.
-Added calendar selection possibility to the todo view popup and to the event/todo editor.
-
+Added calendar selection possibility to the todo view popup and to the event/todo/journal editor.
+
+Fixed memory usage problems in KA/Pi:
+When loading data KA/Pi did load the file data twice.
+Example:
+  A 600k file did consume 1200k memory during loading process.
+  This is fixed, it does now consume only  600k during loading process.
+When saving data KA/Pi did consume a lot of memory for the data parsing during the save process.
+This is fixed.
+Example:
+  Before saving a 600k file KA/Pi did consume 21.7 Meg of Ram.
+  When saving  KA/Pi did consume 28.6 Meg of Ram. That causes a crash on the Zaurus because there was no memeory left in the system.
+  Now  KA/Pi is consuming on saving the same data 22.0 Meg of Ram during the save process. 
+Note: The memory usage of KA/Pi after the data is loaded/saved has not changed.
+
+Fixed memory usage problems in KO/Pi:
+When KO/Pi did save the data to file, it did not release the used buffers after saving.
+The used buffer was released after saving the next time, but there was new buffer space allocated again on that save operation.
+This is fixed.
+Example:
+  When saving a 400k file KO/Pi do now use 400k less memory now.
+
+Optimized memory usage in KO/Pi Agenda view:
+KO/Pi is storing some paint information in extra buffers for faster repainting of the agenda view.
+These buffers were not made smaller (i.e. downsized)  because of performance reasons.
+The handling of these buffers are now much smarter:
+Two (of six) buffers are removed completely.
+The remaing four buffers are now downsized after not using the agenda view for 45 seconds.
+Such that the memory usage of KO/Pi is smaller now in general ( because 2 buffers are removed) and is much smaller when not using the agenda view. That is very important when using fastload for KO/Pi.
+
+Worst case example ( for a maximum size agenda content):
+  When resizing the agenda content to a large scale, KO/Pi did use 17Meg of mem ( and did not use less memory until it was stopped). Now KO/Pi is using on the same operation only 14.3 Meg of mem and after 45 seconds not using the agenda view it uses only 9.4 Meg of mem.
+
+Summary:
+Many memory wasting problems of KA/Pi and KO/Pi fixed such that it is better to use on the Zaurus.
 
 ********** VERSION 2.1.12 ************
 
 KO/Pi:
diff --git a/kabc/vcardformatimpl.cpp b/kabc/vcardformatimpl.cpp
index b9fe6ff..ec5ed80 100644
--- a/kabc/vcardformatimpl.cpp
+++ b/kabc/vcardformatimpl.cpp
@@ -26,8 +26,9 @@ $Id$
 */
 
 #include <qfile.h>
 #include <qregexp.h>
+#include <qapplication.h>
 
 #include <kdebug.h>
 #include <kmdcodec.h>
 #include <kstandarddirs.h>
@@ -68,15 +69,14 @@ bool VCardFormatImpl::load( Addressee &addressee, QFile *file )
 
   return false;
 }
 
+
+#include <kmessagebox.h>
 bool VCardFormatImpl::loadAll( AddressBook *addressBook, Resource *resource, QFile *file )
 {
-  kdDebug(5700) << "VCardFormat::loadAll()" << endl;
-
-  QByteArray fdata = file->readAll();
-  QCString data(fdata.data(), fdata.size()+1);
-
+  
+    QCString data(file->readAll().data(), file->size()+1); 
   VCardEntity e( data );
 
   VCardListIterator it( e.cardList() );
 
@@ -91,9 +91,8 @@ bool VCardFormatImpl::loadAll( AddressBook *addressBook, Resource *resource, QFi
       {
         printf("address %s loaded successfully\n", addressee.formattedName().latin1());
       } 
   }
-
   return true;
 }
 
 void VCardFormatImpl::save( const Addressee &addressee, QFile *file )
@@ -114,26 +113,19 @@ void VCardFormatImpl::save( const Addressee &addressee, QFile *file )
 }
 
 void VCardFormatImpl::saveAll( AddressBook *ab, Resource *resource, QFile *file )
 {
-  VCardEntity vcards;
-  VCardList vcardlist;
-  vcardlist.setAutoDelete( true );
 
-  AddressBook::Iterator it;
+ AddressBook::Iterator it;
   for ( it = ab->begin(); it != ab->end(); ++it ) {
     if ( (*it).resource() == resource ) {
-      VCard *v = new VCard;
-      saveAddressee( (*it), v, true );
+        save((*it),file);
+        qApp->processEvents();
       (*it).setChanged( false );
-      vcardlist.append( v );
     }
   }
-
-  vcards.setCardList( vcardlist );
-
-  QCString vcardData = vcards.asString();
-  file->writeBlock( (const char*)vcardData, vcardData.length() );
+  // for memory usage status test only
+  // KMessageBox::information ( 0, "Stoppppp", QString("Stop ") );
 }
 
 bool VCardFormatImpl::loadAddressee( Addressee& addressee, VCard *v )
 {
diff --git a/kaddressbook/xxport/vcard_xxport.cpp b/kaddressbook/xxport/vcard_xxport.cpp
index c56be8b..91df96d 100644
--- a/kaddressbook/xxport/vcard_xxport.cpp
+++ b/kaddressbook/xxport/vcard_xxport.cpp
@@ -196,12 +196,23 @@ KABC::AddresseeList VCardXXPort::importContacts( const QString& ) const
 
             }
         QFile file( fileName );
         if ( file.open( IO_ReadOnly ) ) {
-            QByteArray rawData = file.readAll();
+            QCString rawData ( file.readAll().data(),file.size()+1);
             file.close();
-            QString data = QString::fromUtf8( rawData.data(), rawData.size() + 1 );
-            addrList = parseVCard( data );
+            int start = 0;
+#ifndef DESKTOP_VERSION            
+            while ( start < rawData.size()-2 ) {
+                if ( rawData.at( start ) == '\r' ) 
+                    if ( rawData.at( start+1 ) == '\n' )
+                        if ( rawData.at( start+2 ) == ' ' ) {
+                            rawData.remove(start,3);
+                            --start;
+                        }
+                ++start;
+            }
+#endif
+            addrList = parseVCard( QString::fromUtf8( rawData.data() ) );
         }
 
     }
 #endif //KAB_EMBEDDED