2 files changed, 21 insertions, 4 deletions

diff --git a/bin/kdepim/WhatsNew.txt b/bin/kdepim/WhatsNew.txt
index adbfd67..5bfe1c8 100644
--- a/bin/kdepim/WhatsNew.txt
+++ b/bin/kdepim/WhatsNew.txt
@@ -1,400 +1,401 @@
 Info about the changes in new versions of KDE-Pim/Pi
 
 ********** VERSION 1.9.20 ************
 
 KO/Pi:
+Added for the "dislplay one day" agenda mode 
+info in the caption and in the day lables:
+Now it is displayed, if the selected day is from "day before yesterday"
+to "day after tomorrow".
 Made it possible to delete a Todo, which has sub-todos.
 Fixed two small problems in the todo view.
 Added missing German translation for filter edit and print dialog.
 Made search dialog closeable by cancel key.
 
 Made it possible to select in the date picker the (ligt grey )
 dates of the prev./next month with the mouse.
 
-Added for the "dislplay one day" agenda mode info in the caption:
-Now it is displayed, if the selected day is from "day before yesterday"
-to "day after tomorrow".
 
 
 
 ********** VERSION 1.9.19 ************
 
 Added a lot of missing translations to KA/Pi, 
 Added some missing translations to KO/Pi and OM/Pi.
 
 Fixed some minor problems in KA/Pi + KO/Pi.
 
 Fixed a crash when closing PwM/Pi.
 Added German translation for PwM/Pi.
 
 Made view change and Month View update faster in KO/Pi.
 
 
 ********** VERSION 1.9.18 ************
 
 FYI: The VERSION 1.9.17 was a testing release only.
 Please read the changelog of VERSION 1.9.17 as well.
 
 Cleaned up the syncing config dialog.
 Added sync config options for date range for events.
 Added sync config options for filters on incoming data.
 Added sync config options for filters on outgoing data.
 Please read the updated SyncHowTo about the new filter settings.
 These filter settings make it now possible to sync with shared
 calendars without writing back private or confidential data
 (via the outgoing filters).
 To sync only with particular parts of a shared calendar, 
 the incoming filter settings can be used.
 An example can be found in the SyncHowTo.
 Same for shared addressbooks.
 
 Added a setting for the global kdepim data storage.
 Usually the data is stored in (yourhomedir/kdepim).
 Now you can set in the Global config dialog TAB, subTAB "Data storage path"
 a directory where all the kdepim data is stored.
 That makes it easy to save all kdepim data on a SD card on the Z, for example.
 
 KO/Pi:
 The timeedit input has a pulldown list for times.
 If opened, this pulldown list should now has the right time highlighted.
 Added the possibility to exclude events/todos/journals in a filter.
 You should exclude journals, if you do not want them to sync with a  public calendar.
 
 KA/Pi:
 Added the possibility to in/exclude public/private/confidential contacts to a filter.
 If you have already defined filterrules in KA/Pi you have to adjust them all by setting the "include public/private/confidential" property manually. Sorry for that ...
 Added printing of card view and details view on desktop.
 Printing of list view is not working...
 Added button for removing pictures in contact editor.
 Parsing data fix of KA/Pi version 1.9.17.
 Fixed the "parse name automatically" problem of KA/Pi version 1.9.17.
 Fixed some syncing merging problems.
 
 
 ********** VERSION 1.9.17 ************
 
 KO/Pi:
 Fixed that tooltips were not updated after moving an item in agenda view.
 Fixed a bug in sorting start date for recurring events in list view.
 Changed the left button in todo viewer from "Agenda" to "Set completed".
 This makes it possible to change a todo in the What's Next View quickly to the completed state without leaving the What's Next View.
 Added more info in the todo viewer: Startdate, parent/sub todos.
  
 
 KA/Pi:
 All fields search does now actually search all the (possible) fields, 
 not only those listed in the contact list.
 Made is possible to inline a picture in a vcard on the Z.
 This was only possible on the desktop, now is it possible on the Z as well.
 Fixed of missing save settings after filter configuration.
 Made saving of addressbook much faster.
 Fixed extension widget layout problem.
 Fixed saving of default formatted name settings.
 Fixed formatted name handling in edit dialog.
 Added an option for changing formatted names of many contacts
 (menu: File - Change - Set formatted name).
 
 QWhatsThis was not working on the Z ( only black rectangle was shown).
 This is Fixed.
 
 KDE-Sync:
 Now readonly KDE resources are synced as well.
 (They are not changed in KDE itself, of course).
 
  
 
 ********** VERSION 1.9.16 ************
 
 KO/Pi:
 Fixed search dialog size on Z 6000 (480x640 display).
 Added setting to hide/show time in agenda items.
 Added setting to hide not running todos in todo view.
 Added columns for start date/time in todo view.
 Replaced the solid half-hour lines in agenda view by dot lines.
 Added possibility of printing the What's Next View on the desktop
 (i.e. Windows and Linux).
 Fixed a crash in KO/Pi when starting KO/Pi with What's Next view.
 Added tooltips in month view.(Tooltips only available on desktop)
 
 Fixed a strange problem in KO/Pi alarm applet.
 Did not find the actual problem, 
 such that now Qtopia reboots again if deinstalling the alarm applet.
 But the alarm applet should work again.
 
 KA/Pi:
 Fixed the problem, that internal pictures were not saved.
 
 Fixed a problem in the pi-sync mode by increasing the timeout for data transfer from 20 seconds to 5 minutes.
 
 Fixed some minor problems. (Like word wrap in help text windows).
 
 Fixed a compiling problem in microkde/kresources.
 
 KO/Pi is using zdbat (renamed to db2file) for syncing with Sharp DTM.
 This version now includes zdbat 1.0.0 (old version was zdbat 0.2.9)
 such that now syncing KO/Pi with Sharp DTM should work on the 
 Zaurus C 3000 model.
 
 ********** VERSION 1.9.15 ************
 
 Usebilty enhancements in KO/Pi:
 When clicking on the date in a month view cell, the day view is shown.
 Old behaviour was, that the "new event" dialog popped up.
 
 Added a one step "undo delete" in KO/Pi (Accessable in the "Action" menu). 
 That means, you can restore the latest
 event/todo/journal you have deleted.
 A journal is deleted, if you clear all the text of the journal.
 
 Fixed the bug of the editor dialogs in KO/Pi of version 1.9.14.
 
 KA/Pi  starting in 480x640 resolution:
 Hide the filter action in toolbar
 and added icons for undo/delete/redo in toolbar.
 
 Change in OM/Pi ViewMail dialog:
 When clicking on the "delete" icon the mail is deleted after confirmation as usual. 
 But the edit dialog is not closed as before, now the next mail in the folder is shown automatically (if there is any).
 
 Fixed a crash when deleting mail-accounts in OM/Pi.
 
 
 ********** VERSION 1.9.14 ************
 
 Fixed some problems with the dialog sizes when switching 
 portrait/landscape mode on 640x480 PDA display.
 
 Fixed some other small bugs in KA/Pi KO/Pi and OM/Pi and PwM/Pi.
 
 Fixed an ugly bug in KOpieMail: 
 KOpieMail was not able to write files (mails) to MSDOS file system, 
 like on an usual preformatted SD card. That should work now.
 To save your mail data on the Sd card do the following:
 Create a dir on the SD card:
 mkdir /mnt/card/localmail
 Go to your home dir:
 cd
 Go to kopiemail data storage dir:
 cd kdepim/apps/kopiemail
 Create a symlink to the SD card:
 ls -s /mnt/card/localmail
 Now KOpieMail will store all mails on the SD card.
 
 KO/Pi Monthview:
 Now "Go to Today" selects the current month from day 1-end,
 not the current date + some days.
 I.e. "Go to Today" shows now always
 the current month with first day of month in the first row. 
 
 Added missing German translation.
 
 Fixed icons of executeable on Wintendo.
 
 Added a "Show next Mail" button to the OM/Pi 
 mail viewer such that the mail below the current mail
 in the mail list view of the current folder
 can be read with a single click.
 
 
 ********** VERSION 1.9.13 ************
 
 Fixed nasty PwM/Pi file reading bug, when
 the used hash algo of file is different then the global 
 hash algo.
 
 Added KA/Pi support for opie mailit mailapplication.
 
 Fixed some bugs in OM/Pi.
 Now character conversion tables are available for the Zaurus
 to make OM/Pi working properly.
 To get the character conversion in OM/Pi working, please download
 at the sourceforge project site the package
 sr-character-conversion_SharpROM_arm.ipk.zip
 (or oz-character-conversion_OZ-gcc3xx_arm.ipk.zip for OZ roms)
 from the section "general files for KDE/Pim"
 Instructions how to install this package are in a ReadMe in this file.
 
 
 Fixed the orientation change problem in KA/Pi when switching
 portrait/landscape mode.
 
 French translation available for KA/Pi and OM/Pi.
 
 Fixed some problems with categories in KO/Pi in DTM sync.
 
 Added selection dialog for export to phone in KA/Pi.
 
 If in KO/Pi is an attendee selected to add to a meeting and this
 attendee is already in the list of attendees, this person is not added
 again.
 
 Some menu cleanup in KA/Pi.
 
 ********** VERSION 1.9.12 ************
 
 Fix for the bug in KO/Pi What's Next view of version 1.9.11.
 
 Bugfix: Licence file is now shown again.
 
 OM/Pi now supports Unicode (utf8 charset).
 Fixed some bugs in OM/Pi.
 
 KA/Pi has more German translation.
 
 
 ********** VERSION 1.9.11 ************
 
 Fixed several problems in PWM/Pi, like
 asking the user, if unsaved changed are pending
 when closing the app.
 And PwM/Pi handles now different texts for the
 fields Description, Username, Password, configurable per category.
 
 Fixed a crash in KO/Pi , when importing/loading vcs files
 which have an entry with an attendee with state:
 NEEDS ACTION
 
 Fixed some problems in the German translation of OM/Pi,
 which makes some dialogs not fitting on the screen
 of the Z 5500.
 
 Fixed Qtopia crash, when disabling/deinstalling
 KO/Pi alarm applet.
 
 Implemented direct KDE<->KA/Pi sync for KA/Pi running 
 on Linux desktop.
 
 Added feature "remove sync info" to sync menu.
 
 Tweaked the KO/Pi What's next view a bit, added
 setting to hide events that are done.
 
 Disabled "beam receive enabled" on startup to 
 avoid problems if Fastload is enabled.
 Please set "beam receive enabled",
 if you want to receive data via IR.
 
 Fixed bug in  direct KDE<->KO/Pi sync for KO/Pi running 
 on Linux desktop.
 
 Made in KA/Pi scrolling possible, if details view is selected.
 (The keyboard focus is set automatically to the search line)
 
 Fixed a bug in DMT sync, that a new entry in DTM was added 
 on every sync to Kx/Pi.
 
 Fixed missing writing of KA/Pi categories to DMT entries when syncing.
 
 Fixed a bug in DMT sync with todos created in KO/Pi containing
 non-latin1 characters.
 
 Rearranged package contents of Sharp-ipks and made all
 packages installable on SD again.
 
 Fixed the writing of addressbook data in DTM sync.
 Empty fields in KA/Pi were not removed. 
 
 Added better category handling in KA/Pi:
 Added item 
 Edit Categories and
 Manage new categories
 to the settings menu.
 Possible to configure a view to display categories.
 
 Added detailed "KDE Sync Howto" and "Multi Sync Howto" to Help menu.
 
 Fixed displaying of "free" days and time in KO Monthview and Agendaview.
 
 ... and many other bugfixes.
 
 ********** VERSION 1.9.10 ************
 
 Many internal small bugfixes.
 And fix of the "big" bug in KO/Pi, 
 that after Syncing the appointments had an offset by several hours.
 That was a problem with the internal timezone setting,
 introduced by the changed timezone configuration settings.
 
 German translation for OM/Pi is now available.
 
 
 ********** VERSION 1.9.9 ************
 
 KDE-Pim/Pi has a new Member!
 It is called PWM/Pi (Passwordmanager/platform-independent) 
 and it is available for the Zaurus.
 It is planned, that it will be available later for Windows.
 (And for Linux, of course).
 It is a port of the Passwordmanager of KDE.
 It will need the MicroKDElibs to run.
 
 Made loading of addressbooks in KA/Pi up to 7 times faster!
 The bigger your addressbook file, the more starting speed 
 will you gain. (relatively)
 
 The Qtopia addressbook connector is now platform independend
 as well and should work on any platform for importing/exporting
 Qtopia and Opie XML files.
 
 Added a +30min feature to the timezone settings to make 
 KDE-Pim/Pi useable in Australia and other parts on the 
 world with strange timezones ;-)
 
 German "Umlaute" should now be sorted correctly on the Z in KA/Pi.
 
 It is now possible to disable the
 "receive data via infrared" feature, such that syncing with
 Outlook is now possible again with Kx/Pi runing.
 Please disable it, before syncing Sharp DTM with Outlook.
 For your convenience, the "receive data via infrared" feature
 is disabled automatically, if you sync Kx/Pi with DTM.
 You have to enable it again manually after syncing.
 Enabling this feature makes it impossible to start the
 Sharp DTM apps. If this feature is enabled, you will only get the 
 alarm notification from KO/Pi and not from the Sharp calendar.
 This is very useful if you sync KO/Pi with Sharp DTM,
 because after syncing you usually would get notified about
 an alarm by KO/Pi and the Sharp Calendar.
 
 Together with the Linux desktop version of KO/Pi
 it is now possible to sync KO/Pi on the Zaurus
 with the complete KDE-desktop (3.3 or later)
 calendar data easily.
 That makes it possible to sync the Z with one 
 click of a mouse with the KDE-Desktop.
 This feature it available for all Zaurus platforms KO/Pi
 is running on.
 The only thing needed is a running KO/Pi on Linux and
 a compiled version of the small 
 KDE-Pim/Pi<->KDE-Desktop access command line program, 
 which is in the KDE-Pim/Pi sources available.
 
 The "KDE-desktop" syncing feature for KA/Pi will follow
 in the next releases.
 
 Fixed the vcard export bug, which had the version 1.9.8.
 
 Added missing GERMAN translation to KO/Pi.
 Hi PsionX, could you add the missing french translation?Thx!
 
 Translation files for KA/Pi are available as well.
 GERMAN translation will be available in the next release.
 PsionX ( yres, you again ;-) ), could you start translating
 KA/Pi? Thx!
 
 You can download the version 1.9.9 at
 
 http://sourceforge.net/project/showfiles.php?group_id=104103&package_id=112604
 
 Note:
 To run the mail program OM/Pi you need libopenssl.
 A link to a download loaction is available at
 ZSI at www.killefiz.de
 
 
 ********** VERSION 1.9.8 ************
 
 Fixed character decoding in OM/Pi.
 (e.g. German "Umlaute" were not displayed properly.)
 
 Made is possible to reparent todos in KO/Pi.
diff --git a/korganizer/koagendaview.cpp b/korganizer/koagendaview.cpp
index c5acafd..6428757 100644
--- a/korganizer/koagendaview.cpp
+++ b/korganizer/koagendaview.cpp
@@ -257,813 +257,829 @@ void EventIndicator::drawContents(QPainter *p)
             }
         }
     } else {
         han->repaint();
         //mPaintWidget->setBackgroundColor( red );
       
         QPainter pa( han );
         int i;
         bool setColor = false;
         for(i=0;i<mColumns;++i) {
             if (mEnabled[i]) {
                 setColor = true;
                 
                 int cellWidth = contentsRect().right()/mColumns;
                 int xOffset = KOGlobals::self()->reverseLayout() ? 
                     (mColumns - 1 - i)*cellWidth + cellWidth/2 -mPixmap.width()/2 :
                     i*cellWidth + cellWidth/2 -mPixmap.width()/2;
                 pa.drawPixmap(QPoint(mXOffset + xOffset,0),mPixmap);
                 //qDebug("222draw pix %d ",xOffset );
                 
             }
 
         }
         pa.end();
        
     }
 }
 
 void EventIndicator::setXOffset( int x )
 {
     mXOffset = x;
 }
 void  EventIndicator::setPaintWidget( KDGanttMinimizeSplitter * w )
 {
     mPaintWidget = w;
 }
 void EventIndicator::changeColumns(int columns)
 {
     mColumns = columns;
     mEnabled.resize(mColumns);
 
     update();
 }
 
 void EventIndicator::enableColumn(int column, bool enable)
 {
     mEnabled[column] = enable;
 }
 
 
 ////////////////////////////////////////////////////////////////////////////
 ////////////////////////////////////////////////////////////////////////////
 ////////////////////////////////////////////////////////////////////////////
 
 KOAgendaView::KOAgendaView(Calendar *cal,QWidget *parent,const char *name) :
     KOEventView (cal,parent,name)
 {
     mBlockUpdating = true;
     mStartHour = 8;
     mSelectedDates.append(QDate::currentDate());
 
     mLayoutDayLabels = 0;
     mDayLabelsFrame = 0;
     mDayLabels = 0;
     bool isRTL = KOGlobals::self()->reverseLayout();
 
     if ( KOPrefs::instance()->mVerticalScreen ) {
         mExpandedPixmap = SmallIcon( "1downarrow" );
         mNotExpandedPixmap = SmallIcon( "1uparrow" );
     } else {
         mExpandedPixmap = SmallIcon( isRTL ? "1leftarrow" : "1rightarrow" );
         mNotExpandedPixmap = SmallIcon( isRTL ? "1rightarrow" : "1leftarrow" );
     }
 
     QBoxLayout *topLayout = new QVBoxLayout(this);
 
     // Create day name labels for agenda columns
     mDayLabelsFrame = new QHBox(this);
     topLayout->addWidget(mDayLabelsFrame);
     mDayLabels = new QFrame (mDayLabelsFrame);
     mLayoutDayLabels = new QHBoxLayout(mDayLabels);
     // Create agenda splitter
 #ifndef KORG_NOSPLITTER
     mSplitterAgenda = new QSplitter(Vertical,this);
     topLayout->addWidget(mSplitterAgenda);
     mSplitterAgenda->setOpaqueResize();
   
     mAllDayFrame = new QHBox(mSplitterAgenda);
 
     QWidget *agendaFrame = new QWidget(mSplitterAgenda);
 #else
 #if 0
     QWidget *mainBox = new QWidget( this );
     topLayout->addWidget( mainBox );
     QBoxLayout *mainLayout = new QVBoxLayout(mainBox);
     mAllDayFrame = new QHBox(mainBox);
     mainLayout->addWidget(mAllDayFrame);
     mainLayout->setStretchFactor( mAllDayFrame, 0 );
     mAllDayFrame->setFocusPolicy(NoFocus);
     QWidget *agendaFrame = new QWidget(mainBox);
     mainLayout->addWidget(agendaFrame);
     mainLayout->setStretchFactor( agendaFrame, 10 );
 
     agendaFrame->setFocusPolicy(NoFocus);
 #endif
     mSplitterAgenda = new KDGanttMinimizeSplitter( Qt::Vertical, this);
     mSplitterAgenda->setMinimizeDirection ( KDGanttMinimizeSplitter::Up );
     topLayout->addWidget( mSplitterAgenda );
     mAllDayFrame = new QHBox(mSplitterAgenda);
     mAllDayFrame->setFocusPolicy(NoFocus);
     QWidget *agendaFrame = new QWidget(mSplitterAgenda);
     agendaFrame->setFocusPolicy(NoFocus);
     
 #endif
 
     // Create all-day agenda widget
     mDummyAllDayLeft = new QVBox( mAllDayFrame );
 
     mExpandButton = new QPushButton(mDummyAllDayLeft);
     mExpandButton->setPixmap( mNotExpandedPixmap );
     int widebut = mExpandButton->sizeHint().width();
     if (   QApplication::desktop()->width() < 480  )
         widebut = widebut*2;
     else
         widebut = (widebut*3) / 2;
     //mExpandButton->setSizePolicy( QSizePolicy( QSizePolicy::Fixed,
     //                                         QSizePolicy::Fixed ) );
     mExpandButton->setFixedSize( widebut, widebut);
     connect( mExpandButton, SIGNAL( clicked() ), SIGNAL( toggleExpand() ) );
     mExpandButton->setFocusPolicy(NoFocus);
     mAllDayAgenda = new KOAgenda(1,mAllDayFrame);
     mAllDayAgenda->setFocusPolicy(NoFocus);
     QWidget *dummyAllDayRight = new QWidget(mAllDayFrame);
 
     // Create event context menu for all day agenda
     mAllDayAgendaPopup = eventPopup();
     connect(mAllDayAgenda,SIGNAL(showIncidencePopupSignal(Incidence *)),
             mAllDayAgendaPopup,SLOT(showIncidencePopup(Incidence *)));
 
     // Create agenda frame
     QGridLayout *agendaLayout = new QGridLayout(agendaFrame,3,3);
     //  QHBox *agendaFrame = new QHBox(splitterAgenda);
 
     // create event indicator bars
     mEventIndicatorTop = new EventIndicator(EventIndicator::Top,agendaFrame);
     agendaLayout->addWidget(mEventIndicatorTop,0,1);
     mEventIndicatorTop->setPaintWidget( mSplitterAgenda );
     mEventIndicatorBottom = new EventIndicator(EventIndicator::Bottom,
                                                agendaFrame);
     agendaLayout->addWidget(mEventIndicatorBottom,2,1);
     QWidget *dummyAgendaRight = new QWidget(agendaFrame);
     agendaLayout->addWidget(dummyAgendaRight,0,2);
 
     // Create time labels
     mTimeLabels = new TimeLabels(24,agendaFrame);
     agendaLayout->addWidget(mTimeLabels,1,0);
 
     // Create agenda
     mAgenda = new KOAgenda(1,96,KOPrefs::instance()->mHourSize,agendaFrame);
     agendaLayout->addMultiCellWidget(mAgenda,1,1,1,2);
     agendaLayout->setColStretch(1,1);
     mAgenda->setFocusPolicy(NoFocus);
     // Create event context menu for agenda
     mAgendaPopup = eventPopup();
   
     mAgendaPopup->addAdditionalItem(QIconSet(SmallIcon("bell")),
                                     i18n("Toggle Alarm"),mAgenda,
                                     SLOT(popupAlarm()),true);
 
 
     connect(mAgenda,SIGNAL(showIncidencePopupSignal(Incidence *)),
             mAgendaPopup,SLOT(showIncidencePopup(Incidence *)));
   
     // make connections between dependent widgets
     mTimeLabels->setAgenda(mAgenda);
 
     // Update widgets to reflect user preferences
     //  updateConfig();
 
     // createDayLabels();
 
     // these blank widgets make the All Day Event box line up with the agenda
     dummyAllDayRight->setFixedWidth(mAgenda->verticalScrollBar()->width());
     dummyAgendaRight->setFixedWidth(mAgenda->verticalScrollBar()->width());
     mDummyAllDayLeft->setFixedWidth(mTimeLabels->width());
 
     // Scrolling
     connect(mAgenda->verticalScrollBar(),SIGNAL(valueChanged(int)),
             mTimeLabels, SLOT(positionChanged()));
     connect(mTimeLabels->verticalScrollBar(),SIGNAL(valueChanged(int)),
             SLOT(setContentsPos(int)));
 
     // Create/Show/Edit/Delete Event
     connect(mAgenda,SIGNAL(newEventSignal(int,int)),
             SLOT(newEvent(int,int)));
     connect(mAgenda,SIGNAL(newEventSignal(int,int,int,int)),
             SLOT(newEvent(int,int,int,int)));
     connect(mAllDayAgenda,SIGNAL(newEventSignal(int,int)),
             SLOT(newEventAllDay(int,int)));
     connect(mAllDayAgenda,SIGNAL(newEventSignal(int,int,int,int)),
             SLOT(newEventAllDay(int,int)));
     connect(mAgenda,SIGNAL(newTimeSpanSignal(int,int,int,int)),
             SLOT(newTimeSpanSelected(int,int,int,int)));
     connect(mAllDayAgenda,SIGNAL(newTimeSpanSignal(int,int,int,int)),
             SLOT(newTimeSpanSelectedAllDay(int,int,int,int)));
     connect(mAgenda,SIGNAL(newStartSelectSignal()),SLOT(updateView()));
     connect(mAllDayAgenda,SIGNAL(newStartSelectSignal()),SLOT(updateView()));
   
     connect(mAgenda,SIGNAL(editIncidenceSignal(Incidence *)),
             SIGNAL(editIncidenceSignal(Incidence *)));
     connect(mAllDayAgenda,SIGNAL(editIncidenceSignal(Incidence *)),
             SIGNAL(editIncidenceSignal(Incidence *)));
     connect(mAgenda,SIGNAL(showIncidenceSignal(Incidence *)),
             SIGNAL(showIncidenceSignal(Incidence *)));
     connect(mAllDayAgenda,SIGNAL(showIncidenceSignal(Incidence *)),
             SIGNAL(showIncidenceSignal(Incidence *)));
     connect(mAgenda,SIGNAL(deleteIncidenceSignal(Incidence *)),
             SIGNAL(deleteIncidenceSignal(Incidence *)));
     connect(mAllDayAgenda,SIGNAL(deleteIncidenceSignal(Incidence *)),
             SIGNAL(deleteIncidenceSignal(Incidence *)));
 
     connect(mAgenda,SIGNAL(itemModified(KOAgendaItem *, int )),
             SLOT(updateEventDates(KOAgendaItem *, int )));
     connect(mAllDayAgenda,SIGNAL(itemModified(KOAgendaItem *, int )),
             SLOT(updateEventDates(KOAgendaItem *, int)));
 
     // event indicator update
     connect(mAgenda,SIGNAL(lowerYChanged(int)),
             SLOT(updateEventIndicatorTop(int)));
     connect(mAgenda,SIGNAL(upperYChanged(int)),
             SLOT(updateEventIndicatorBottom(int)));
     // drag signals
     /*
       connect(mAgenda,SIGNAL(startDragSignal(Event *)),
       SLOT(startDrag(Event *)));
       connect(mAllDayAgenda,SIGNAL(startDragSignal(Event *)),
       SLOT(startDrag(Event *)));
     */
     // synchronize selections
     connect( mAgenda, SIGNAL( incidenceSelected( Incidence * ) ),
              mAllDayAgenda, SLOT( deselectItem() ) );
     connect( mAllDayAgenda, SIGNAL( incidenceSelected( Incidence * ) ),
              mAgenda, SLOT( deselectItem() ) );
     connect( mAgenda, SIGNAL( incidenceSelected( Incidence * ) ),
              SIGNAL( incidenceSelected( Incidence * ) ) );
     connect( mAllDayAgenda, SIGNAL( incidenceSelected( Incidence * ) ),
              SIGNAL( incidenceSelected( Incidence * ) ) );
     connect( mAgenda, SIGNAL( resizedSignal() ),
              SLOT( updateConfig( ) ) );  
     connect( mAgenda, SIGNAL( addToCalSignal(Incidence *, Incidence *) ),
              SLOT( addToCalSlot(Incidence *, Incidence * ) ) );  
     connect( mAllDayAgenda, SIGNAL( addToCalSignal(Incidence * ,Incidence *) ),
              SLOT( addToCalSlot(Incidence * , Incidence *) ) );  
     // connect( mAgenda, SIGNAL( cloneIncidenceSignal(Incidence *) ), SIGNAL( cloneIncidenceSignal(Incidence *) ) );
     //connect( mAllDayAgenda, SIGNAL( cloneIncidenceSignal(Incidence *) ), SIGNAL( cloneIncidenceSignal(Incidence *) ) );
 
 
 }
 
 void KOAgendaView::toggleAllDay()
 {
     if ( mSplitterAgenda->firstHandle() ) 
         mSplitterAgenda->firstHandle()->toggle();
 }
 void KOAgendaView::addToCalSlot(Incidence * inc, Incidence * incOld )
 {
     calendar()->addIncidence( inc ); 
     
     if ( incOld ) {
         if ( incOld->type() == "Todo" )
             emit  todoMoved((Todo*)incOld,  KOGlobals::EVENTEDITED );
         else
             emit incidenceChanged(incOld, KOGlobals::EVENTEDITED);
     }
     
 }
 
 KOAgendaView::~KOAgendaView()
 {
     delete mAgendaPopup;
     delete mAllDayAgendaPopup;
     delete KOAgendaItem::paintPix();
     delete KOAgendaItem::paintPixSel();
 }
 void KOAgendaView::resizeEvent( QResizeEvent* e )
 {
     //qDebug("KOAgendaView::resizeEvent( QResizeEvent* e ) %d ", e->size().width());
     bool uc = false;
     int ow =  e->oldSize().width();
     int oh =  e->oldSize().height();
     int w = e->size().width();
     int h =  e->size().height();
     if ( (ow > oh && w< h ) || (ow < oh && w > h ) ) { 
         if ( ! mBlockUpdating  && !globalFlagBlockStartup && !globalFlagBlockAgenda )
             uc = true;
         //qDebug("view changed %d %d %d %d ", ow, oh , w , h);
     }
     mUpcomingWidth = e->size().width() ;
     if ( mBlockUpdating || uc ) {
         mBlockUpdating = false;
         //mAgenda->setMinimumSize(800 , 600 );
         //qDebug("mAgenda->resize+++++++++++++++ ");
         updateConfig();
         //qDebug("KOAgendaView::Updating now possible ");
     } else 
         createDayLabels();
     //qDebug("resizeEvent end "); 
    
 }
 void KOAgendaView::createDayLabels()
 {
 
     if ( mBlockUpdating || globalFlagBlockLabel == 1) {
         // qDebug(" KOAgendaView::createDayLabels() blocked ");
         return;
 
     }
     int newHight;
 
     // ### Before deleting and recreating we could check if mSelectedDates changed...
     // It would remove some flickering and gain speed (since this is called by
     // each updateView() call)
 
     int maxWid = mUpcomingWidth - mTimeLabels->width()- mAgenda->verticalScrollBar()->width() - 2;
     mDayLabelsFrame->setMaximumWidth( mUpcomingWidth );
     if ( maxWid < 0 )
         maxWid = 20;
 
     QFont dlf = KOPrefs::instance()->mTimeLabelsFont;
     QFontMetrics fm ( dlf );
     int selCount = mSelectedDates.count();
     QString dayTest = "Mon 20";
     int wid = fm.width( dayTest );
     maxWid  -= ( selCount * 3 );  
     if ( maxWid < 0 )
         maxWid = 20;
     int needWid = wid * selCount;
     //qDebug("++++++++Needed : %d  MaxWidth: %d", needWid, maxWid );
     //if ( needWid > maxWid ) 
     //  qDebug("DAYLABELS TOOOOOOO BIG ");
     while ( needWid > maxWid   ) {
         dayTest = dayTest.left( dayTest.length() - 1 );
         wid = fm.width( dayTest );
         needWid = wid * selCount;
     }
     int maxLen =  dayTest.length();
     int fontPoint = dlf.pointSize();
     if (  maxLen < 2 ) {
         int fontPoint = dlf.pointSize();
         while ( fontPoint > 4 ) {
             --fontPoint;
             dlf.setPointSize( fontPoint );
             QFontMetrics f( dlf );
             wid = f.width( "20" );
             needWid = wid * selCount;
             if ( needWid < maxWid )
                 break;
         }
         maxLen = 2;
     }
     //qDebug("Max len %d ", dayTest.length() );
 
     QFontMetrics tempF( dlf );
     newHight = tempF.height();
     mDayLabels->setFont( dlf );
     // mLayoutDayLabels = new QHBoxLayout(mDayLabels);;
     // mLayoutDayLabels->addSpacing(mTimeLabels->width());
     //mLayoutDayLabels->addSpacing( 2 );
     // QFont lFont = dlf;
     bool appendLabels = false;
     QLabel *dayLabel;
     dayLabel = mDayLabelsList.first();
     if ( !dayLabel  ) {
         appendLabels = true;
         dayLabel = new QLabel(mDayLabels);
         mDayLabelsList.append( dayLabel );
         mLayoutDayLabels->addWidget(dayLabel);
     }
     dayLabel->setFixedWidth( mTimeLabels->width()+2  ); 
     dayLabel->setFont( dlf );
     dayLabel->setAlignment(QLabel::AlignHCenter);
     dayLabel->setText( KOGlobals::self()->calendarSystem()->monthName( mSelectedDates.first(), true ) );
     dayLabel->show();
     DateList::ConstIterator dit;
+    bool oneday = (mSelectedDates.first() == mSelectedDates.last() );
     for( dit = mSelectedDates.begin(); dit != mSelectedDates.end(); ++dit ) {
         QDate date = *dit;
         // QBoxLayout *dayLayout = new QVBoxLayout(mLayoutDayLabels);
         if (  ! appendLabels ) {
             dayLabel = mDayLabelsList.next();
             if (  !dayLabel  )
                 appendLabels = true;
         }
         if ( appendLabels ) {
             dayLabel = new QLabel(mDayLabels);
             mDayLabelsList.append( dayLabel );
             mLayoutDayLabels->addWidget(dayLabel);
         }
         dayLabel->setMinimumWidth( 1 );
         dayLabel->setMaximumWidth( 2048 );
         dayLabel->setFont( dlf );
         dayLabel->show();
         QString str;
         int dW = KOGlobals::self()->calendarSystem()->dayOfWeek(date);
         QString dayName = KOGlobals::self()->calendarSystem()->weekDayName( dW, true );
         switch ( maxLen ) {
         case 2:
             str = QString::number( date.day() );
             break;
 
         case 3:
             str =  dayName.left( 1 )  +QString::number( date.day());
 
             break;
         case 4:
             str =  dayName.left( 1 ) + " " +QString::number( date.day());
 
             break;
         case 5:
             str =  dayName.left( 2 ) + " " +QString::number( date.day());
 
             break;
         case 6:
             str =  dayName.left( 3 ) + " " +QString::number( date.day());
             break;
 
         default:
             break;
         }
-
+        if ( oneday ) {
+            QString addString;
+            if ( mSelectedDates.first() == QDateTime::currentDateTime().date() )
+                addString = i18n("Today");
+            else if ( mSelectedDates.first() == QDateTime::currentDateTime().date().addDays(1) )
+                addString = i18n("Tomorrow");
+            else if ( mSelectedDates.first() == QDateTime::currentDateTime().date().addDays(-1) )
+                addString = i18n("Yesterday");
+            else if ( mSelectedDates.first() == QDateTime::currentDateTime().date().addDays(-2) )
+                addString = i18n("Day before yesterday");
+            else if ( mSelectedDates.first() == QDateTime::currentDateTime().date().addDays(2) )
+                addString = i18n("Day after tomorrow");
+            if ( !addString.isEmpty() ) {
+                str = addString+", " + str;
+            }
+        }
         dayLabel->setText(str);
         dayLabel->setAlignment(QLabel::AlignHCenter);
         if (date == QDate::currentDate()) {
             QFont bFont = dlf;
             bFont.setBold( true );
             dayLabel->setFont(bFont);
         }
         //dayLayout->addWidget(dayLabel);
 
 #ifndef KORG_NOPLUGINS
         CalendarDecoration::List cds = KOCore::self()->calendarDecorations();
         CalendarDecoration *it;
         for(it = cds.first(); it; it = cds.next()) {
             QString text = it->shortText( date );
             if ( !text.isEmpty() ) {
                 QLabel *label = new QLabel(text,mDayLabels);
                 label->setAlignment(AlignCenter);
                 dayLayout->addWidget(label);
             }
         }
 
         for(it = cds.first(); it; it = cds.next()) {
             QWidget *wid = it->smallWidget(mDayLabels,date);
             if ( wid ) {
                 //      wid->setHeight(20);
                 dayLayout->addWidget(wid);
             }
         }
 #endif
     }
     if (  ! appendLabels ) {
         dayLabel = mDayLabelsList.next();
         if (  !dayLabel  )
             appendLabels = true;
     }
     if ( appendLabels ) {
         dayLabel = new QLabel(mDayLabels);
         mDayLabelsList.append( dayLabel );
         mLayoutDayLabels->addWidget(dayLabel);
     }
     //dayLabel->hide();//test only
 
     int offset = (mAgenda->width() - mAgenda->verticalScrollBar()->width()-3 ) % mSelectedDates.count() ;
     if ( offset < 0 ) offset = 0;
     //qDebug("mLayoutDayLabels->addSpacing %d  ", mAgenda->verticalScrollBar()->width()+offset+2  );
     dayLabel->setText("");//QString::number ( mSelectedDates.first().month() ) );
     dayLabel->show();
     dayLabel->setFixedWidth( mAgenda->verticalScrollBar()->width()+ offset );
     //qDebug("setToFixed %d ", mAgenda->verticalScrollBar()->width()+ offset+2);
     //mLayoutDayLabels->addSpacing(mAgenda->verticalScrollBar()->width()+ offset+2);
     if ( !appendLabels ) {
         dayLabel = mDayLabelsList.next();
         while (  dayLabel  ) {
             //qDebug("!dayLabel %d",dayLabel );
             dayLabel->hide();
             dayLabel = mDayLabelsList.next();
         }
     }
     //mDayLabelsFrame->show();
     //mDayLabels->show();
     //qDebug("heigt %d %d %d ",mDayLabelsFrame->height(), mDayLabelsFrame->sizeHint().height(), newHight);
     //mDayLabelsFrame->resize( mAgenda->visibleWidth(), newHight );
     mDayLabelsFrame->setFixedHeight( newHight );
 }
 
 int KOAgendaView::maxDatesHint()
 {
     // Not sure about the max number of events, so return 0 for now.
     return 0;
 }
 
 int KOAgendaView::currentDateCount()
 {
     return mSelectedDates.count();
 }
 
 QPtrList<Incidence> KOAgendaView::selectedIncidences()
 {
     QPtrList<Incidence> selected;
     Incidence *incidence;
 
     incidence = mAgenda->selectedIncidence();
     if (incidence) selected.append(incidence);
 
     incidence = mAllDayAgenda->selectedIncidence();
     if (incidence) selected.append(incidence);
 
     return selected;
 }
 
 DateList KOAgendaView::selectedDates()
 {
     DateList selected;
     QDate qd;
 
     qd = mAgenda->selectedIncidenceDate();
     if (qd.isValid()) selected.append(qd);
 
     qd = mAllDayAgenda->selectedIncidenceDate();
     if (qd.isValid()) selected.append(qd);
 
     return selected;
 }
 
 
 void KOAgendaView::updateView()
 {
     if ( mBlockUpdating )
         return;
     //  kdDebug() << "KOAgendaView::updateView()" << endl;
     fillAgenda();
  
 }
 
 
 /*
   Update configuration settings for the agenda view. This method is not
   complete.
 */
 void KOAgendaView::updateConfig()
 {
     if ( mBlockUpdating )
         return;
     //  kdDebug() << "KOAgendaView::updateConfig()" << endl;
 
     // update config for children
     mTimeLabels->updateConfig();
     mAgenda->storePosition();
     mAgenda->updateConfig();
     mAllDayAgenda->updateConfig();
     // widget synchronization
     //TODO: find a better way, maybe signal/slot
     mTimeLabels->positionChanged();
 
     // for some reason, this needs to be called explicitly
     mTimeLabels->repaint();
 
     mDummyAllDayLeft->setFixedWidth(mTimeLabels->width());
 
     // ToolTips displaying summary of events
     KOAgendaItem::toolTipGroup()->setEnabled(KOPrefs::instance()
                                              ->mEnableToolTips);
   
     //setHolidayMasks();
 
     //createDayLabels(); called by via updateView();
     mEventIndicatorTop->setXOffset(mTimeLabels->width() + mAgenda->frameWidth()); 
     updateView();
     mAgenda->restorePosition();
 }
 
 
 void KOAgendaView::updateEventDates(KOAgendaItem *item, int type)
 {
     //  kdDebug() << "KOAgendaView::updateEventDates(): " << item->text() << endl;
     //qDebug("KOAgendaView::updateEventDates ");
     QDateTime startDt,endDt;
     QDate startDate;
     int lenInSecs;
     //  if ( type == KOAgenda::RESIZETOP )
     //       qDebug("RESIZETOP ");
     //   if ( type ==  KOAgenda::RESIZEBOTTOM )
     //       qDebug("RESIZEBOTTOM ");
     //   if ( type ==  KOAgenda::MOVE )
     //       qDebug("MOVE ");
     if ( item->incidence()->type() == "Event" ) {
         startDt =item->incidence()->dtStart();
         endDt = item->incidence()->dtEnd();
         lenInSecs = startDt.secsTo( endDt );
     }
 
     // emit incidenceItemChanged( item->incidence(), KOGlobals::EVENTEDITED );
 
     if ( item->incidence()->type()=="Todo" && item->mLastMoveXPos > 0 ) {
         startDate = mSelectedDates[item->mLastMoveXPos];
     } else {
         if (item->cellX() < 0) {
             startDate = (mSelectedDates.first()).addDays(item->cellX());
         } else {
             startDate = mSelectedDates[item->cellX()];
         }
     }
     startDt.setDate(startDate);
 
     if (item->incidence()->doesFloat()) {
         endDt.setDate(startDate.addDays(item->cellWidth() - 1));
     } else {
         if ( type == KOAgenda::RESIZETOP ||  type ==  KOAgenda::MOVE )
             startDt.setTime(mAgenda->gyToTime(item->cellYTop()));
         if ( item->incidence()->type() == "Event" ) {
             if ( type ==  KOAgenda::MOVE ) {
                 endDt = startDt.addSecs(lenInSecs);
 
             } else if ( type ==  KOAgenda::RESIZEBOTTOM  ) {
                 if (item->lastMultiItem()) {
                     endDt.setTime(mAgenda->gyToTime(item->lastMultiItem()->cellYBottom()+1));
                     endDt.setDate(startDate.
                                   addDays(item->lastMultiItem()->cellX() - item->cellX()));
                 } else {
                     endDt.setTime(mAgenda->gyToTime(item->cellYBottom()+1));
                     endDt.setDate(startDate);
                 }
             }
         } else {
             // todo
             if (item->lastMultiItem()) {
                 endDt.setTime(mAgenda->gyToTime(item->lastMultiItem()->cellYBottom()+1));
                 endDt.setDate(startDate.
                               addDays(item->lastMultiItem()->cellX() - item->cellX()));
             } else {
                 //qDebug("tem->cellYBottom() %d",item->cellYBottom() );
                 if ( item->cellYBottom() > 0 )
                     endDt.setTime(mAgenda->gyToTime(item->cellYBottom()+1));
                 else
                     endDt.setTime((static_cast<Todo*>(item->incidence()))->dtDue().time());
                 endDt.setDate(startDate);
             }
         }
     }
 
 
     if ( item->incidence()->type() == "Event" ) {
         item->incidence()->setDtStart(startDt);
         (static_cast<Event*>(item->incidence()))->setDtEnd(endDt);
     } else if ( item->incidence()->type() == "Todo" ) {
         (static_cast<Todo*>(item->incidence()))->setDtDue(endDt);
     }
     //qDebug("KOAgendaView::updateEventDates stsart %s end %s ", startDt.toString().latin1(), endDt.toString().latin1() );
     item->incidence()->setRevision(item->incidence()->revision()+1);
     item->setItemDate(startDt.date());
     //item->updateItem();
     if ( item->incidence()->type() == "Todo" ) {
          emit  todoMoved((Todo*)item->incidence(),  KOGlobals::EVENTEDITED );
 
     }
      else
          emit incidenceChanged(item->incidence(), KOGlobals::EVENTEDITED);
      item->updateItem();
 }
 
 void KOAgendaView::showDates( const QDate &start, const QDate &end )
 {
     //  kdDebug() << "KOAgendaView::selectDates" << endl;
 
     mSelectedDates.clear();
     // qDebug("KOAgendaView::showDates ");
     QDate d = start;
     while (d <= end) {
         mSelectedDates.append(d);
         d = d.addDays( 1 );
     }
 
     // and update the view
     fillAgenda();
 }
 
 
 void KOAgendaView::showEvents(QPtrList<Event>)
 {
     kdDebug() << "KOAgendaView::showEvents() is not yet implemented" << endl;
 }
 
 void KOAgendaView::changeEventDisplay(Event *, int)
 {
     //  qDebug("KOAgendaView::changeEventDisplay ");
     //  kdDebug() << "KOAgendaView::changeEventDisplay" << endl;
     // this should be re-written to be MUCH smarter.  Right now we
     // are just playing dumb.
     fillAgenda();
 }
 
 void KOAgendaView::fillAgenda(const QDate &)
 {
     // qDebug("KOAgendaView::fillAgenda ");
     fillAgenda();
 }
 
 void KOAgendaView::fillAgenda()
 {
     if ( globalFlagBlockStartup )
         return;
     if ( globalFlagBlockAgenda == 1 )
         return;
     //if ( globalFlagBlockAgenda == 2 )
     //globalFlagBlockAgenda = 0;
     // globalFlagBlockPainting = false;
     if ( globalFlagBlockAgenda == 0 )
         globalFlagBlockAgenda = 1;
     //  clearView();
     //qDebug("fillAgenda()++++ ");
     globalFlagBlockAgendaItemPaint = 1;
     mAllDayAgenda->changeColumns(mSelectedDates.count());
     mAgenda->changeColumns(mSelectedDates.count());
     qApp->processEvents(); 
     mEventIndicatorTop->changeColumns(mSelectedDates.count());
     mEventIndicatorBottom->changeColumns(mSelectedDates.count());
     setHolidayMasks();
 
     //mAgenda->hideUnused();
     //mAllDayAgenda->hideUnused();
  
     //   mAgenda->blockNextRepaint( false );
     //   mAgenda->viewport()->repaint();
     //   mAgenda->blockNextRepaint( true );
     mMinY.resize(mSelectedDates.count());
     mMaxY.resize(mSelectedDates.count());
 
     QPtrList<Event> dayEvents;
 
     // ToDo items shall be displayed for the day they are due, but only showed today if they are already overdue.
     // Therefore, get all of them.
     QPtrList<Todo> todos  = calendar()->todos();
 
     mAgenda->setDateList(mSelectedDates);
 
     QDate today = QDate::currentDate();
 
     DateList::ConstIterator dit;
     int curCol = 0;
     for( dit = mSelectedDates.begin(); dit != mSelectedDates.end(); ++dit ) {
         QDate currentDate = *dit;
         //    kdDebug() << "KOAgendaView::fillAgenda(): " << currentDate.toString()
         //              << endl;
 
         dayEvents = calendar()->events(currentDate,true);
 
         // Default values, which can never be reached
         mMinY[curCol] = mAgenda->timeToY(QTime(23,59)) + 1;
         mMaxY[curCol] = mAgenda->timeToY(QTime(0,0)) - 1;
 
         unsigned int numEvent;
         for(numEvent=0;numEvent<dayEvents.count();++numEvent) {
             Event *event = dayEvents.at(numEvent);
             if ( !KOPrefs::instance()->mShowSyncEvents && event->uid().left(2) == QString("la") )
                 if ( event->uid().left(15) == QString("last-syncEvent-")  )
                     continue;
             //      kdDebug() << " Event: " << event->summary() << endl;
 
             int beginX = currentDate.daysTo(event->dtStart().date()) + curCol;
             int endX = currentDate.daysTo(event->dtEnd().date()) + curCol;
 
             //      kdDebug() << "  beginX: " << beginX << "  endX: " << endX << endl;
 
             if (event->doesFloat()) {
                 if (event->recurrence()->doesRecur()) {
                     mAllDayAgenda->insertAllDayItem(event,currentDate,curCol,curCol);
                 } else {
                     if (beginX <= 0 && curCol == 0) {
                         mAllDayAgenda->insertAllDayItem(event,currentDate,beginX,endX);
                     } else if (beginX == curCol) {
                         mAllDayAgenda->insertAllDayItem(event,currentDate,beginX,endX);
                     }
                 }
             } else if (event->isMultiDay()) {
                 if ( event->doesRecur () ) {
                     QDate dateit = currentDate;
                     int count = 0;
                     int max = event->dtStart().daysTo( event->dtEnd() ) +2;
                     while (! event->recursOn( dateit ) && count <= max ) {
                         ++count; 
                         dateit = dateit.addDays( -1 );
                     }
                     bool ok;
                     QDateTime nextOcstart = event->getNextOccurence( QDateTime(dateit) ,&ok );
                     if ( ok )
                          {
                                 int secs = event->dtStart().secsTo( event->dtEnd() );
                                 QDateTime nextOcend =nextOcstart.addSecs( secs ); ;
                                 beginX = currentDate.daysTo(nextOcstart.date()) + curCol;
                                 endX = currentDate.daysTo(nextOcend.date()) + curCol;
                             
                         }
                 }
                 int startY = mAgenda->timeToY(event->dtStart().time());
                 int endY = mAgenda->timeToY(event->dtEnd().time()) - 1;
                 //qDebug("insert %d %d %d %d   %d ",beginX,endX,startY,endY , curCol );
                 if ((beginX <= 0 && curCol == 0) || beginX == curCol) {
                     //qDebug("insert!!! ");
                     mAgenda->insertMultiItem(event,currentDate,beginX,endX,startY,endY);
                 }
                 if (beginX == curCol) {
                     mMaxY[curCol] = mAgenda->timeToY(QTime(23,59));
                     if (startY < mMinY[curCol]) mMinY[curCol] = startY;
                 } else if (endX == curCol) {