5 files changed, 12 insertions, 11 deletions
diff --git a/kaddressbook/kabcore.cpp b/kaddressbook/kabcore.cpp
index 77321aa..af12f2b 100644
--- a/kaddressbook/kabcore.cpp
+++ b/kaddressbook/kabcore.cpp
@@ -27,787 +27,787 @@ Copyright (c) 2004 Ulf Schenk
 $Id$
 */
 #include "kabcore.h"
 #include <stdaddressbook.h>
 #include <klocale.h>
 #include <kfiledialog.h>
 #include <qtimer.h>
 #include <qlabel.h>
 #include <qregexp.h>
 #include <qlineedit.h>
 #include <qcheckbox.h>
 #include <qpushbutton.h>
 #include <qprogressbar.h>
 #include <libkdepim/phoneaccess.h>
 #ifndef KAB_EMBEDDED
 #include <qclipboard.h>
 #include <qdir.h> 
 #include <qfile.h>
 #include <qapplicaton.h>
 #include <qprogressbar.h>
 #include <qlayout.h>
 #include <qregexp.h>
 #include <qvbox.h>
 #include <kabc/addresseelist.h>
 #include <kabc/errorhandler.h>
 #include <kabc/resource.h>
 #include <kabc/vcardconverter.h>
 #include <kapplication.h>
 #include <kactionclasses.h>
 #include <kcmultidialog.h>
 #include <kdebug.h>
 #include <kdeversion.h>
 #include <kkeydialog.h>
 #include <kmessagebox.h>
 #include <kprinter.h>
 #include <kprotocolinfo.h>
 #include <kresources/selectdialog.h>
 #include <kstandarddirs.h>
 #include <ktempfile.h>
 #include <kxmlguiclient.h>
 #include <kaboutdata.h>
 #include <libkdepim/categoryselectdialog.h>
 #include "addresseeutil.h"
 #include "addresseeeditordialog.h"
 #include "extensionmanager.h"
 #include "kstdaction.h"
 #include "kaddressbookservice.h"
 #include "ldapsearchdialog.h"
 #include "printing/printingwizard.h"
 #else // KAB_EMBEDDED
 #include <kapplication.h>
 #include "KDGanttMinimizeSplitter.h"
 #include "kaddressbookmain.h"
 #include "kactioncollection.h"
 #include "addresseedialog.h"
 //US
 #include <addresseeview.h>
 #include <qapp.h>
 #include <qmenubar.h>
 //#include <qtoolbar.h>
 #include <qmessagebox.h>
 #include <kdebug.h>
 #include <kiconloader.h> // needed for SmallIcon
 #include <kresources/kcmkresources.h>
 #include <ktoolbar.h>
 #include <kprefsdialog.h>
 //#include <qlabel.h>
 #ifndef DESKTOP_VERSION
 #include <qpe/ir.h>
 #include <qpe/qpemenubar.h>
 #include <qtopia/qcopenvelope_qws.h>
 #else
 #include <qmenubar.h>
 #endif
 #endif // KAB_EMBEDDED
 #include "kcmconfigs/kcmkabconfig.h"
 #include "kcmconfigs/kcmkdepimconfig.h"
 #include "kpimglobalprefs.h"
 #include "externalapphandler.h"
 #include "xxportselectdialog.h"
 #include <kresources/selectdialog.h>
 #include <kmessagebox.h>
 #include <picture.h>
 #include <resource.h>
 //US#include <qsplitter.h>
 #include <qmap.h>
 #include <qdir.h>
 #include <qfile.h>
 #include <qvbox.h>
 #include <qlayout.h>
 #include <qclipboard.h>
 #include <qtextstream.h>
 #include <qradiobutton.h>
 #include <qbuttongroup.h>
 #include <libkdepim/categoryselectdialog.h>
 #include <libkdepim/categoryeditdialog.h>
 #include <kabc/vcardconverter.h>
 #include "addresseeutil.h"
 #include "undocmds.h"
 #include "addresseeeditordialog.h"
 #include "viewmanager.h"
 #include "details/detailsviewcontainer.h"
 #include "kabprefs.h"
 #include "xxportmanager.h"
 #include "incsearchwidget.h"
 #include "jumpbuttonbar.h"
 #include "extensionmanager.h"
 #include "addresseeconfig.h"
 #include "nameeditdialog.h"
 #include <kcmultidialog.h>
 #ifdef _WIN32_
 #ifdef  _OL_IMPORT_
 #include "kaimportoldialog.h"
 #endif
 #else
 #include <unistd.h>
 #endif
 // sync includes
 #include <libkdepim/ksyncprofile.h>
 #include <libkdepim/ksyncprefsdialog.h>
 class KABCatPrefs : public QDialog
 {
  public:
    KABCatPrefs( QWidget *parent=0, const char *name=0 ) :
      QDialog( parent, name, true ) 
    {
        setCaption( i18n("Manage new Categories") );
        QVBoxLayout* lay = new QVBoxLayout( this );
        lay->setSpacing( 3 );
        lay->setMargin( 3 );
        QLabel * lab = new QLabel( i18n("After importing/loading/syncing\nthere may be new categories in\naddressees\nwhich are not in the category list.\nPlease choose what to do:\n "), this );
        lay->addWidget( lab ); 
        QButtonGroup* format = new  QButtonGroup( 1, Horizontal, i18n("New categories not in list:"), this );
        lay->addWidget( format ); 
        format->setExclusive ( true ) ;
        addCatBut = new QRadioButton(i18n("Add to category list"), format );
        new QRadioButton(i18n("Remove from addressees"), format );
        addCatBut->setChecked( true );
        QPushButton * ok = new QPushButton( i18n("OK"), this );
        lay->addWidget( ok );
        QPushButton * cancel = new QPushButton( i18n("Cancel"), this );
        lay->addWidget( cancel );
        connect ( ok,SIGNAL(clicked() ),this , SLOT ( accept() )  );
        connect (cancel, SIGNAL(clicked() ), this, SLOT ( reject())  );
        resize( 200, 200 );
    }
      
    bool addCat() { return addCatBut->isChecked(); }
 private:
    QRadioButton* addCatBut;
 };
 class KABFormatPrefs : public QDialog
 {
  public:
    KABFormatPrefs( QWidget *parent=0, const char *name=0 ) :
      QDialog( parent, name, true ) 
    {
        setCaption( i18n("Set formatted name") );
        QVBoxLayout* lay = new QVBoxLayout( this );
        lay->setSpacing( 3 );
        lay->setMargin( 3 );
        QLabel * lab = new QLabel( i18n("You can set the formatted name\nfor a list of contacts in one go."), this );
        lay->addWidget( lab ); 
        QButtonGroup* format = new QButtonGroup( 1, Horizontal, i18n("Set formatted name to:"), this );
        lay->addWidget( format ); 
        format->setExclusive ( true ) ;
        simple = new QRadioButton(i18n("Simple: James Bond"), format );
        full = new QRadioButton(i18n("Full: Mr. James 007 Bond I"), format );
        reverse = new QRadioButton(i18n("Reverse: Bond, James"), format );
        company = new QRadioButton(i18n("Organization: MI6"), format );
        simple->setChecked( true );
        setCompany = new QCheckBox(i18n("Set formatted name to\norganization, if name empty"), this);
        lay->addWidget( setCompany );
        QPushButton * ok = new QPushButton( i18n("Select contact list"), this );
        lay->addWidget( ok );
        QPushButton * cancel = new QPushButton( i18n("Cancel"), this );
        lay->addWidget( cancel );
        connect ( ok,SIGNAL(clicked() ),this , SLOT ( accept() )  );
        connect (cancel, SIGNAL(clicked() ), this, SLOT ( reject())  );
        //resize( 200, 200 );
       
    }
 public:
    QRadioButton* simple, *full, *reverse, *company;
    QCheckBox* setCompany;
 };
 class KAex2phonePrefs : public QDialog
 {
  public:
    KAex2phonePrefs( QWidget *parent=0, const char *name=0 ) :
      QDialog( parent, name, true ) 
    {
        setCaption( i18n("Export to phone options") );
        QVBoxLayout* lay = new QVBoxLayout( this );
        lay->setSpacing( 3 );
        lay->setMargin( 3 );
        QLabel *lab;
        lay->addWidget(lab = new QLabel( i18n("Please read Help-Sync Howto\nto know what settings to use."), this ) );  
        lab->setAlignment (AlignHCenter  ); 
        QHBox* temphb;
        temphb = new QHBox( this );
        new QLabel( i18n("I/O device: "), temphb ); 
        mPhoneDevice = new QLineEdit( temphb);
        lay->addWidget( temphb );
        temphb = new QHBox( this );
        new QLabel( i18n("Connection: "), temphb ); 
        mPhoneConnection = new QLineEdit( temphb);
        lay->addWidget( temphb );
        temphb = new QHBox( this );
        new QLabel( i18n("Model(opt.): "), temphb ); 
        mPhoneModel = new QLineEdit( temphb);
        lay->addWidget( temphb );
        // mWriteToSim = new QCheckBox( i18n("Write Contacts to SIM card\n(if not, write to phone memory)"), this );
        // lay->addWidget( mWriteToSim );
        lay->addWidget(lab = new QLabel( i18n("NOTE: This will remove all old\ncontact data on phone!"), this ) );  
        lab->setAlignment (AlignHCenter); 
        QPushButton * ok = new QPushButton( i18n("Export to mobile phone!"), this );
        lay->addWidget( ok );
        QPushButton * cancel = new QPushButton( i18n("Cancel"), this );
        lay->addWidget( cancel );
        connect ( ok,SIGNAL(clicked() ),this , SLOT ( accept() )  );
        connect (cancel, SIGNAL(clicked() ), this, SLOT ( reject())  );
        resize( 220, 240 );
        
    }
   
 public:
    QLineEdit* mPhoneConnection, *mPhoneDevice, *mPhoneModel; 
    QCheckBox* mWriteToSim;
 };
 bool pasteWithNewUid = true;
 #ifdef KAB_EMBEDDED
 KABCore::KABCore( KAddressBookMain *client, bool readWrite, QWidget *parent, const char *name )
  : QWidget( parent, name ), KSyncInterface(), mGUIClient( client ), mViewManager( 0 ),
    mExtensionManager( 0 ),mConfigureDialog( 0 ),/*US  mLdapSearchDialog( 0 ),*/
    mReadWrite( readWrite ), mModified( false ), mMainWindow(client)
 #else //KAB_EMBEDDED
 KABCore::KABCore( KXMLGUIClient *client, bool readWrite, QWidget *parent, const char *name )
  : QWidget( parent, name ), KSyncInterface(), mGUIClient( client ), mViewManager( 0 ),
    mExtensionManager( 0 ), mConfigureDialog( 0 ), mLdapSearchDialog( 0 ),
    mReadWrite( readWrite ), mModified( false )
 #endif //KAB_EMBEDDED
 {
  //  syncManager = new KSyncManager((QWidget*)this, (KSyncInterface*)this, KSyncManager::KAPI, KABPrefs::instance(), syncMenu);
  //  syncManager->setBlockSave(false);
  mIncSearchWidget = 0;
    mMiniSplitter = 0;
  mExtensionBarSplitter = 0;
  mIsPart = !parent->inherits( "KAddressBookMain" );
  mAddressBook = KABC::StdAddressBook::selfNoLoad();
  KABC::StdAddressBook::setAutomaticSave( false );
 #ifndef KAB_EMBEDDED
  mAddressBook->setErrorHandler( new KABC::GUIErrorHandler );
 #endif //KAB_EMBEDDED
  connect( mAddressBook, SIGNAL( addressBookChanged( AddressBook * ) ),
           SLOT( addressBookChanged() ) );
 #if 0
  // LR moved to addressbook init method
  mAddressBook->addCustomField( i18n( "Department" ), KABC::Field::Organization,
                                "X-Department", "KADDRESSBOOK" );
  mAddressBook->addCustomField( i18n( "Profession" ), KABC::Field::Organization,
                                "X-Profession", "KADDRESSBOOK" );
  mAddressBook->addCustomField( i18n( "Assistant's Name" ), KABC::Field::Organization,
                                "X-AssistantsName", "KADDRESSBOOK" );
  mAddressBook->addCustomField( i18n( "Manager's Name" ), KABC::Field::Organization,
                                "X-ManagersName", "KADDRESSBOOK" );
  mAddressBook->addCustomField( i18n( "Spouse's Name" ), KABC::Field::Personal,
                                "X-SpousesName", "KADDRESSBOOK" );
  mAddressBook->addCustomField( i18n( "Office" ), KABC::Field::Personal,
                                "X-Office", "KADDRESSBOOK" );
  mAddressBook->addCustomField( i18n( "IM Address" ), KABC::Field::Personal,
                                "X-IMAddress", "KADDRESSBOOK" );
  mAddressBook->addCustomField( i18n( "Anniversary" ), KABC::Field::Personal,
                                "X-Anniversary", "KADDRESSBOOK" );
  //US added this field to become compatible with Opie/qtopia addressbook
  // values can be "female" or "male" or "". An empty field represents undefined.
  mAddressBook->addCustomField( i18n( "Gender" ), KABC::Field::Personal,
                                "X-Gender", "KADDRESSBOOK" );
  mAddressBook->addCustomField( i18n( "Children" ), KABC::Field::Personal,
                                "X-Children", "KADDRESSBOOK" );
  mAddressBook->addCustomField( i18n( "FreeBusyUrl" ), KABC::Field::Personal,
                                "X-FreeBusyUrl", "KADDRESSBOOK" );
 #endif
  initGUI();
  mIncSearchWidget->setFocus();
  connect( mViewManager, SIGNAL( selected( const QString& ) ),
           SLOT( setContactSelected( const QString& ) ) );
  connect( mViewManager, SIGNAL( executed( const QString& ) ),
           SLOT( executeContact( const QString& ) ) );
  connect( mViewManager, SIGNAL( deleteRequest( ) ),
           SLOT( deleteContacts( ) ) );
  connect( mViewManager, SIGNAL( modified() ),
           SLOT( setModified() ) );
  connect( mExtensionManager, SIGNAL( modified( const KABC::Addressee::List& ) ), this, SLOT( extensionModified( const KABC::Addressee::List& ) ) );
  connect( mExtensionManager, SIGNAL( changedActiveExtension( int ) ), this, SLOT( extensionChanged( int ) ) );
  connect( mXXPortManager, SIGNAL( modified() ),
           SLOT( setModified() ) );
  connect( mJumpButtonBar, SIGNAL( jumpToLetter( const QString& ) ),
           SLOT( incrementalSearchJump( const QString& ) ) );
  connect( mIncSearchWidget, SIGNAL( fieldChanged() ),
           mJumpButtonBar, SLOT( recreateButtons() ) );
  connect( mDetails, SIGNAL( sendEmail( const QString& ) ),
           SLOT( sendMail( const QString& ) ) );
  connect( ExternalAppHandler::instance(), SIGNAL (requestForNameEmailUidList(const QString&, const QString&)),this, SLOT(requestForNameEmailUidList(const QString&, const QString&)));
  connect( ExternalAppHandler::instance(), SIGNAL (requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&)),this, SLOT(requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&)));
  connect( ExternalAppHandler::instance(), SIGNAL (requestForBirthdayList(const QString&, const QString&)),this, SLOT(requestForBirthdayList(const QString&, const QString&)));
  connect( ExternalAppHandler::instance(), SIGNAL (nextView()),this, SLOT(setDetailsToggle()));
  connect( ExternalAppHandler::instance(), SIGNAL (doRingSync()),this, SLOT( doRingSync()));
  connect( ExternalAppHandler::instance(), SIGNAL (callContactdialog()),this, SLOT(callContactdialog()));
 #ifndef KAB_EMBEDDED
  connect( mViewManager, SIGNAL( urlDropped( const KURL& ) ),
           mXXPortManager, SLOT( importVCard( const KURL& ) ) );
  connect( mDetails, SIGNAL( browse( const QString& ) ),
           SLOT( browse( const QString& ) ) );
  mAddressBookService = new KAddressBookService( this );
 #endif //KAB_EMBEDDED
  mMessageTimer = new QTimer( this ); 
  connect( mMessageTimer, SIGNAL( timeout() ), this, SLOT( setCaptionBack() ) );
  mEditorDialog = 0;
  createAddresseeEditorDialog( this );
  setModified( false );  
  mBRdisabled = false;
 #ifndef DESKTOP_VERSION
  infrared  = 0;
 #endif
  //toggleBeamReceive( );
  mMainWindow->toolBar()->show();
  // we have a toolbar repainting error on the Zaurus when starting KA/Pi
  //QTimer::singleShot( 10, this , SLOT ( updateToolBar())); 
    QTimer::singleShot( 100, this, SLOT ( loadDataAfterStart() ));
 }
 void KABCore::receiveStart( const QCString& cmsg, const QByteArray& data )
 {
-    qDebug("KO: QCOP start message received: %s ", cmsg.data()  );
+    //qDebug("KO: QCOP start message received: %s ", cmsg.data()  );
    mCStringMess = cmsg;
    mByteData = data;
 }
 void  KABCore::loadDataAfterStart()
 {
-    qDebug("KABCore::loadDataAfterStart() ");
+    //qDebug("KABCore::loadDataAfterStart() ");
    ((StdAddressBook*)mAddressBook)->init( true );
        mViewManager->refreshView();
 #ifndef DESKTOP_VERSION  
        disconnect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), this, SLOT (receiveStart ( const QCString &, const QByteArray & )));
        
      QObject::connect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), ExternalAppHandler::instance(), SLOT (appMessage ( const QCString &, const QByteArray & )));
      if ( !mCStringMess.isEmpty() ) 
          ExternalAppHandler::instance()->appMessage( mCStringMess, mByteData );
 #endif
-    QTimer::singleShot( 10, this , SLOT ( updateToolBar())); 
+      // QTimer::singleShot( 10, this , SLOT ( updateToolBar())); 
    setCaptionBack();
 }
 void KABCore::updateToolBar()
 {
    static int iii = 0;
    ++iii;
    mMainWindow->toolBar()->repaintMe();
    if ( iii < 4 )
        QTimer::singleShot( 100*iii, this , SLOT ( updateToolBar())); 
 }
 KABCore::~KABCore()
 {
    //  save();
    //saveSettings();
    //KABPrefs::instance()->writeConfig();
    delete AddresseeConfig::instance();
    mAddressBook = 0;
    KABC::StdAddressBook::close();
    
    delete syncManager;
 #ifndef DESKTOP_VERSION
    if ( infrared )
        delete infrared;
 #endif
 }
 void KABCore::receive( const QCString& cmsg, const QByteArray& data )
 {
    //qDebug("KA: QCOP message received: %s ", cmsg.data()  );
    if ( cmsg == "setDocument(QString)" ) {
        QDataStream stream( data, IO_ReadOnly );
        QString fileName;
        stream >> fileName;
        recieve( fileName );
        return;
    }
 }
 void KABCore::toggleBeamReceive( )
 {
    if ( mBRdisabled  )
        return;
 #ifndef DESKTOP_VERSION
    if ( infrared ) {
        qDebug("KA: AB disable BeamReceive ");
        delete infrared;
        infrared = 0;
        mActionBR->setChecked(false);
        return;
    } 
    qDebug("KA: AB enable BeamReceive ");
    mActionBR->setChecked(true);
    infrared = new QCopChannel("QPE/Application/addressbook",this, "channelAB" ) ;   
    QObject::connect( infrared, SIGNAL (received ( const QCString &, const QByteArray & )),this, SLOT(receive(  const QCString&, const QByteArray& )));
 #endif
 }
 void KABCore::disableBR(bool b)
 {
 #ifndef DESKTOP_VERSION
    if ( b ) {
        if ( infrared ) {
            toggleBeamReceive( );
        }
        mBRdisabled = true;
    } else {
        if ( mBRdisabled ) {
            mBRdisabled = false;
            //toggleBeamReceive( );
        }
    }
 #endif
 }
 void KABCore::recieve( QString fn  )
 {
    //qDebug("KABCore::recieve ");
    int count = mAddressBook->importFromFile( fn, true );
    if ( count )
        setModified( true );
    mViewManager->refreshView();
    message(i18n("%1 contact(s) received!").arg( count ));
    topLevelWidget()->showMaximized();
    topLevelWidget()->raise();
 }
 void KABCore::restoreSettings()
 {
  mMultipleViewsAtOnce = KABPrefs::instance()->mMultipleViewsAtOnce;
  bool state;
  if (mMultipleViewsAtOnce)
    state = KABPrefs::instance()->mDetailsPageVisible;
  else
    state = false;
  mActionDetails->setChecked( state );
  setDetailsVisible( state );
  state = KABPrefs::instance()->mJumpButtonBarVisible;
  mActionJumpBar->setChecked( state );
  setJumpButtonBarVisible( state );
 /*US
 QValueList<int> splitterSize = KABPrefs::instance()->mDetailsSplitter;
  if ( splitterSize.count() == 0 ) {
    splitterSize.append( width() / 2 );
    splitterSize.append( width() / 2 );
  }
  mMiniSplitter->setSizes( splitterSize );
  if (  mExtensionBarSplitter ) {
  splitterSize = KABPrefs::instance()->mExtensionsSplitter;
  if ( splitterSize.count() == 0 ) {
    splitterSize.append( width() / 2 );
    splitterSize.append( width() / 2 );
  }
  mExtensionBarSplitter->setSizes( splitterSize );
  }
 */
  mViewManager->restoreSettings();
  mIncSearchWidget->setCurrentItem( KABPrefs::instance()->mCurrentIncSearchField );
  mExtensionManager->restoreSettings();
 #ifdef DESKTOP_VERSION
  int wid = width();
  if ( wid < 10 )
      wid = 400;
 #else
  int wid = QApplication::desktop()->width();
  if ( wid < 640 )
      wid = QApplication::desktop()->height();
 #endif
  QValueList<int> splitterSize;// = KABPrefs::instance()->mDetailsSplitter;
  if ( true /*splitterSize.count() == 0*/ ) {
      splitterSize.append( wid / 2 );
      splitterSize.append( wid / 2 );
  }
  mMiniSplitter->setSizes( splitterSize );
  if (  mExtensionBarSplitter ) {
      //splitterSize = KABPrefs::instance()->mExtensionsSplitter;
      if ( true /*splitterSize.count() == 0*/ ) {
          splitterSize.append( wid / 2 );
          splitterSize.append( wid / 2 );
      }
      mExtensionBarSplitter->setSizes( splitterSize );
  }
 #ifdef DESKTOP_VERSION
  KConfig *config = KABPrefs::instance()->getConfig();
  config->setGroup("WidgetLayout");
  QStringList list;
  list = config->readListEntry("MainLayout");
  int x,y,w,h;
  if ( ! list.isEmpty() ) {
      x = list[0].toInt();
      y = list[1].toInt();
      w = list[2].toInt();
      h = list[3].toInt(); 
      KApplication::testCoords( &x,&y,&w,&h );
      topLevelWidget()->setGeometry(x,y,w,h);
      
  } else {
      topLevelWidget()->setGeometry( 40 ,40 , 640, 440);
  }
 #endif
 }
 void KABCore::saveSettings()
 {
  KABPrefs::instance()->mJumpButtonBarVisible = mActionJumpBar->isChecked();
  if ( mExtensionBarSplitter )
    KABPrefs::instance()->mExtensionsSplitter = mExtensionBarSplitter->sizes();
  KABPrefs::instance()->mDetailsPageVisible = mActionDetails->isChecked();
  KABPrefs::instance()->mDetailsSplitter = mMiniSplitter->sizes();
 #ifndef KAB_EMBEDDED
  KABPrefs::instance()->mExtensionsSplitter = mExtensionBarSplitter->sizes();
  KABPrefs::instance()->mDetailsSplitter = mDetailsSplitter->sizes();
 #endif //KAB_EMBEDDED
  mExtensionManager->saveSettings();
  mViewManager->saveSettings();
  KABPrefs::instance()->mCurrentIncSearchField = mIncSearchWidget->currentItem();
  KABPrefs::instance()->writeConfig();
  qDebug("KA: KABCore::saveSettings() ");
 }
 KABC::AddressBook *KABCore::addressBook() const
 {
  return mAddressBook;
 }
 KConfig *KABCore::config()
 {
 #ifndef KAB_EMBEDDED
  return KABPrefs::instance()->config();
 #else //KAB_EMBEDDED
  return KABPrefs::instance()->getConfig();
 #endif //KAB_EMBEDDED
 }
 KActionCollection *KABCore::actionCollection() const
 {
  return mGUIClient->actionCollection();
 }
 KABC::Field *KABCore::currentSearchField() const
 {
   if (mIncSearchWidget)
    return mIncSearchWidget->currentField();
  else
    return 0;
 }
 QStringList KABCore::selectedUIDs() const
 {
  return mViewManager->selectedUids();
 }
 KABC::Resource *KABCore::requestResource( QWidget *parent )
 {
  QPtrList<KABC::Resource> kabcResources = addressBook()->resources();
  QPtrList<KRES::Resource> kresResources;
  QPtrListIterator<KABC::Resource> resIt( kabcResources );
  KABC::Resource *resource;
  while ( ( resource = resIt.current() ) != 0 ) {
    ++resIt;
    if ( !resource->readOnly() ) {
      KRES::Resource *res = static_cast<KRES::Resource*>( resource );
      if ( res )
        kresResources.append( res );
    }
  }
  KRES::Resource *res = KRES::SelectDialog::getResource( kresResources, parent );
  return static_cast<KABC::Resource*>( res );
 }
 #ifndef KAB_EMBEDDED
 KAboutData *KABCore::createAboutData()
 #else //KAB_EMBEDDED
 void KABCore::createAboutData()
 #endif //KAB_EMBEDDED
 {
  QString version;
 #include <../version>
    QMessageBox::about( this, "About KAddressbook/Pi",
                        "KAddressbook/Platform-independent\n"
                        "(KA/Pi) " +version + " - " +
 #ifdef DESKTOP_VERSION
                        "Desktop Edition\n"
 #else
                        "PDA-Edition\n"
                        "for: Zaurus 5500 / 7x0 / 8x0\n"
 #endif
                        "(c) 2004 Ulf Schenk\n"
                        "(c) 2004-2005 Lutz Rogowski\nrogowski@kde.org\n"
                        "(c) 1997-2003, The KDE PIM Team\n"
  "Tobias Koenig Maintainer\n"
  "Don Sanders Original author\n"
  "Cornelius Schumacher Co-maintainer\n"
  "Mike Pilone GUI and framework redesign\n"
  "Greg Stern DCOP interface\n"
  "Mark Westcot Contact pinning\n"
  "Michel Boyer de la Giroday LDAP Lookup\n"
  "Steffen Hansen LDAP Lookup"
 #ifdef _WIN32_
 "(c) 2004 Lutz Rogowski Import from OL\nrogowski@kde.org\n"
 #endif
 );
 }
 void KABCore::setContactSelected( const QString &uid )
 {
  KABC::Addressee addr = mAddressBook->findByUid( uid );
  if ( !mDetails->isHidden() )
    mDetails->setAddressee( addr );
  if ( !addr.isEmpty() ) {
    emit contactSelected( addr.formattedName() );
    KABC::Picture pic = addr.photo();
    if ( pic.isIntern() ) {
 //US      emit contactSelected( pic.data() );
 //US instead use:
      QPixmap px;
      if (pic.data().isNull() != true)
      {
        px.convertFromImage(pic.data());
      }
      emit contactSelected( px );
    }
  }
  mExtensionManager->setSelectionChanged();
  // update the actions
  bool selected = !uid.isEmpty();
  if ( mReadWrite ) {
    mActionCut->setEnabled( selected );
    mActionPaste->setEnabled( selected );
  }
  mActionCopy->setEnabled( selected );
  mActionDelete->setEnabled( selected );
  mActionEditAddressee->setEnabled( selected );
  mActionMail->setEnabled( selected );
  mActionMailVCard->setEnabled( selected );
  //if (mActionBeam)
  //mActionBeam->setEnabled( selected );
  mActionWhoAmI->setEnabled( selected );
 }
 void KABCore::sendMail()
 {
  sendMail( mViewManager->selectedEmails().join( ", " ) );
 }
 void KABCore::sendMail( const QString& emaillist )
 {
  // the parameter has the form "name1 <abc@aol.com>,name2 <abc@aol.com>;... "
  if (emaillist.contains(",") > 0)
    ExternalAppHandler::instance()->mailToMultipleContacts( emaillist, QString::null );
  else
    ExternalAppHandler::instance()->mailToOneContact( emaillist );
 }
 void KABCore::mailVCard()
 {
  QStringList uids = mViewManager->selectedUids();
  if ( !uids.isEmpty() )
    mailVCard( uids );
 }
 void KABCore::mailVCard( const QStringList& uids )
 {
  QStringList urls;
 //  QString tmpdir = locateLocal("tmp", KGlobal::getAppName());
  QString dirName = "/tmp/" + KApplication::randomString( 8 );
  QDir().mkdir( dirName, true );
  for( QStringList::ConstIterator it = uids.begin(); it != uids.end(); ++it ) {
    KABC::Addressee a = mAddressBook->findByUid( *it );
    if ( a.isEmpty() )
      continue;
    QString name = a.givenName() + "_" + a.familyName() + ".vcf";
    QString fileName = dirName + "/" + name;
    QFile outFile(fileName);
    if ( outFile.open(IO_WriteOnly) ) {  // file opened successfully
      KABC::VCardConverter converter;
      QString vcard;
      converter.addresseeToVCard( a, vcard );
      QTextStream t( &outFile );  // use a text stream
      t.setEncoding( QTextStream::UnicodeUTF8 );
      t << vcard;
      outFile.close();
      urls.append( fileName );
    }
  }
  bool result = ExternalAppHandler::instance()->mailToMultipleContacts( QString::null, urls.join(", ") );
diff --git a/kaddressbook/kaddressbookmain.cpp b/kaddressbook/kaddressbookmain.cpp
index 8fe3ee0..c417226 100644
--- a/kaddressbook/kaddressbookmain.cpp
+++ b/kaddressbook/kaddressbookmain.cpp
@@ -1,241 +1,241 @@
 /*
    This file is part of KAddressbook.
    Copyright (c) 1999 Don Sanders <dsanders@kde.org>
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    GNU General Public License for more details.
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
    As a special exception, permission is given to link this program
    with any edition of Qt, and distribute the resulting executable,
    without including the source code for Qt in the source distribution.
 */
 #ifdef KAB_EMBEDDED
 #include "kabprefs.h"
 #include <kglobal.h>
 #include <qmessagebox.h>
 #include <qtoolbar.h>
 #include <qapplication.h>
 #else //KAB_EMBEDDED
 #include <kedittoolbar.h>
 #include <kkeydialog.h>
 #include <kmessagebox.h>
 #include <kstatusbar.h>
 #endif //KAB_EMBEDDED
 #include <klocale.h>
 #include "kabcore.h"
 #include "kaddressbookmain.h"
 #include "kactioncollection.h"
 #ifdef KAB_EMBEDDED
-KAddressBookMain::KAddressBookMain() : KMainWindow( 0, "adrressbook" )
+KAddressBookMain::KAddressBookMain() : KMainWindow( 0, "abmain" )
 #else //KAB_EMBEDDED
 //MOC_SKIP_BEGIN
 KAddressBookMain::KAddressBookMain() : DCOPObject( "KAddressBookIface" ), KMainWindow( 0 ) 
 //MOC_SKIP_END
 #endif //KAB_EMBEDDED
 {
    setIcon(SmallIcon( "ka24" )  );
 #if 0
  //US for embedded systems, create the toolbar before we initiate KABCore.
  // KABCore will fill the toolbar with menues and icons
  QMainWindow::ToolBarDock tbd;
  tbd = Top;
  iconToolBar = new QToolBar( this );
  addToolBar (iconToolBar , tbd );
  iconToolBar->setHorizontalStretchable(true);  
 //US  iconToolBar->setWidth(300);
 #endif // 0
  mCore = new KABCore( this, true, this );
  
 #ifdef KAB_EMBEDDED
  setCaption( i18n( "KAddressbook/Pi" ) );
 #else //KAB_EMBEDDED
  setCaption( i18n( "Address Book Browser" ) );
 #endif //KAB_EMBEDDED
  //mCore->restoreSettings();
  initActions();
  setCentralWidget( mCore );
 //US  statusBar()->show();
 #ifndef KAB_EMBEDDED
  setStandardToolBarMenuEnabled(true);
  
  createGUI( "kaddressbookui.rc", false );
 #endif //KAB_EMBEDDED
  setAutoSaveSettings();
  mCore->restoreSettings();
 #ifndef DESKTOP_VERSION
      QObject::connect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), mCore, SLOT (receiveStart ( const QCString &, const QByteArray & )));
 #endif
 }
 KAddressBookMain::~KAddressBookMain()
 {
    // mCore->saveSettings();
 }
 void KAddressBookMain::showMinimized () 
 {
    QWidget::showMinimized () ;
 }
 void KAddressBookMain::addEmail( QString addr )
 {
  mCore->addEmail( addr );
 }
 #ifndef KAB_EMBEDDED
 ASYNC KAddressBookMain::showContactEditor( QString uid )
 {
  mCore->editContact( uid );
 }
 #endif //KAB_EMBEDDED
 void KAddressBookMain::newContact()
 {
  mCore->newContact();
 }
 QString KAddressBookMain::getNameByPhone( QString phone )
 {
  return mCore->getNameByPhone( phone );
 }
 void KAddressBookMain::save()
 {
  mCore->save();
 }
 void KAddressBookMain::exit()
 {
  close( );
 }
 void KAddressBookMain::saveProperties( KConfig* )
 {
 }
 void KAddressBookMain::readProperties( KConfig* )
 {
 }
 void KAddressBookMain::initActions()
 {
 #ifndef KAB_EMBEDDED
  KStdAction::quit( this, SLOT( close() ), actionCollection() );
  KStdAction::configureToolbars( this, SLOT( configureToolbars() ), actionCollection() );
 #else //KAB_EMBEDDED
  //US: transfered the setup of the actions into KABCore
 #endif //KAB_EMBEDDED
  
 }
 //US new method to setup menues and toolbars on embedded systems
 #ifdef KAB_EMBEDDED
 /*
 QToolBar * KAddressBookMain::getIconToolBar()
 {
  return iconToolBar;
 }
 */
 void KAddressBookMain::createGUI()
 {
    
 }
 #endif //KAB_EMBEDDED
 void KAddressBookMain::configureToolbars()
 {
 #ifndef KAB_EMBEDDED
  saveMainWindowSettings( KGlobal::config(), "MainWindow" );
  KEditToolbar dlg( factory() );
  connect( &dlg, SIGNAL( newToolbarConfig() ), SLOT( slotNewToolbarConfig() ) );
  dlg.exec();
 #else  //KAB_EMBEDDED
    qDebug("KAddressBookMain::configureToolbars() not implemented by ulf" );
 #endif //KAB_EMBEDDED
 }
 void KAddressBookMain::slotNewToolbarConfig()
 {
 #ifndef KAB_EMBEDDED
  applyMainWindowSettings( KGlobal::config(), "MainWindow" );
 #else  //KAB_EMBEDDED
    qDebug("KAddressBookMain::slotNewToolbarConfig() not implemented by ulf" );
 #endif //KAB_EMBEDDED
 }
 void KAddressBookMain::configureKeys()
 {
 #ifndef KAB_EMBEDDED
  KKeyDialog::configureKeys( actionCollection(), xmlFile(), true, this );
 #else  //KAB_EMBEDDED
    qDebug("KAddressBookMain::configureKeys() not implemented by ulf" );
 #endif //KAB_EMBEDDED
 }
 void KAddressBookMain::closeEvent( QCloseEvent* ce )
 {
  bool mModified = mCore->modified();
  bool mAskForQuit = KABPrefs::instance()->mAskForQuit;
  QString mess = i18n( "Close KA/Pi?");
  if ( mModified == true ) 
      mess += i18n( "\nChanges will be saved!");
  else
      mess += i18n( "\nNo unsaved changes detected!\nNothing will be  saved!");
  bool mQuit = true;
  if (mAskForQuit)
  { 
    
    int res = QMessageBox::information( this, "KA/Pi", mess , i18n("Yes!"), i18n("No"), 0, 0 );
    if (res == 0)
      mQuit = true;
    else
      mQuit = false;
  }
  if (mQuit == false)
    return;
  if (mModified == true)
  {
    save();
    mCore->saveSettings();
    //KABPrefs::instance()->writeConfig();
  }
  ce->accept();
 }
 #ifndef KAB_EMBEDDED
 #include "kaddressbookmain.moc"
 #endif //KAB_EMBEDDED
diff --git a/kmicromail/accountview.cpp b/kmicromail/accountview.cpp
index 4879d57..d1d4f7e 100644
--- a/kmicromail/accountview.cpp
+++ b/kmicromail/accountview.cpp
@@ -1,263 +1,263 @@
 #include "accountview.h"
 #include "accountitem.h"
 #include "selectstore.h"
 #include <libmailwrapper/settings.h>
 #include <libmailwrapper/mailwrapper.h>
 #include <libmailwrapper/mailtypes.h>
 #include <libmailwrapper/abstractmail.h>
 /* OPIE */
 #include <qpe/qpeapplication.h>
 /* QT */
 #include <qmessagebox.h>
 #include <qpopupmenu.h>
 #include <qcheckbox.h>
 #include <qtimer.h>
 #include <qspinbox.h>
 #include <klocale.h>
 #include <kmessagebox.h>
 using namespace Opie::Core;
 AccountView::AccountView( QWidget *parent, const char *name, WFlags flags )
        : QListView( parent, name, flags )
 {
    //connect( this, SIGNAL( selectionChanged(QListViewItem*) ),
    //       SLOT( refresh(QListViewItem*) ) );
    connect( this, SIGNAL( clicked(QListViewItem*) ),
           SLOT( refresh(QListViewItem*) ) );
    connect( this, SIGNAL( returnPressed(QListViewItem*) ),
           SLOT( refresh(QListViewItem*) ) );
     connect( this, SIGNAL( mouseButtonPressed(int,QListViewItem*,const QPoint&,int) ),this,
          SLOT( slotHold(int,QListViewItem*,const QPoint&,int) ) );
    setSorting(0);
 }
 AccountView::~AccountView()
 {
    imapAccounts.clear();
    mhAccounts.clear();
 }
 void AccountView::slotContextMenu(int id)
 {
    AccountViewItem *view = static_cast<AccountViewItem *>(currentItem());
    if (!view) return;
    view->contextMenuSelected(id);
 }
 void AccountView::slotHold(int button, QListViewItem * item,const QPoint&,int)
 {
    if (button==1) {return;}
    if (!item) return;
    AccountViewItem *view = static_cast<AccountViewItem *>(item);
    QPopupMenu*m = view->getContextMenu();
    if (!m) return;
    connect(m,SIGNAL(activated(int)),this,SLOT(slotContextMenu(int)));
    m->setFocus();
    m->exec( QPoint( QCursor::pos().x(), QCursor::pos().y()) );
    delete m;
 }
 void AccountView::populate( QList<Account> list )
 {
    clear();
    imapAccounts.clear();
    mhAccounts.clear();
    mhAccounts.append(new MHviewItem(AbstractMail::defaultLocalfolder(),this));
    Account *it;
    for ( it = list.first(); it; it = list.next() )
    {
        if ( it->getType() == MAILLIB::A_IMAP )
        {
            IMAPaccount *imap = static_cast<IMAPaccount *>(it);
            imapAccounts.append(new IMAPviewItem( imap, this ));
        }
        else if ( it->getType() == MAILLIB::A_POP3 )
        {
            POP3account *pop3 = static_cast<POP3account *>(it);
            /* must not be hold 'cause it isn't required */
            (void) new POP3viewItem( pop3, this );
        }
         else if ( it->getType() == MAILLIB::A_NNTP )
        {
            NNTPaccount *nntp = static_cast<NNTPaccount *>(it);
            /* must not be hold 'cause it isn't required */
            (void) new NNTPviewItem( nntp, this );
       }
     }
 }
 void AccountView::refresh(QListViewItem *item)
 {
    if ( item )
    {
        bool ask = true;
-        qDebug("text -%s- ",item->text( 0 ).latin1() );
+        //qDebug("text -%s- ",item->text( 0 ).latin1() );
        if ( item->text( 0 ) == i18n (" Local Mailfolders") )
            ask = false;
        else {
            if ( item->parent() )
                if ( item->parent()->text( 0 ) == i18n (" Local Mailfolders") )
                    ask = false;
        }
        if ( ask ) {
            int result = KMessageBox::warningContinueCancel(this,
                                                        i18n("Refresh\n%1\n?").arg( item->text(0) ),
                                                        i18n("Refresh"),i18n("Refresh"),i18n("Cancel"),
                                                        true);
            if (result != KMessageBox::Continue) return;
        }
        m_currentItem = item;
        topLevelWidget()->setCaption( i18n ( "Refreshing %1 ... please wait" ). arg ( m_currentItem->text( 0 ) ) ) ;
        QTimer::singleShot( 500, this, SLOT ( refreshCurrentSelected() ) );
     
    }
 }
 void AccountView::refreshOutgoing()
 {
    m_currentItem = currentItem();
    if ( !m_currentItem ) return;
    AccountViewItem *view = static_cast<AccountViewItem *>(m_currentItem);
    if ( !view->getFolder() )
        return;
    QString bName = view->getFolder()->getDisplayName();
    if (bName.startsWith("/")&&bName.length()>1)
    {
        bName.replace(0,1,"");
    }
    int pos = bName.findRev("/");
    if (pos > 0)
    {
        bName.replace(0,pos+1,"");
    }
    //qDebug("name *%s* ",bName.lower().latin1() );
    if ( bName.lower() == "outgoing" || bName.lower() == "sent" ||  bName.lower() == "sendfailed" ) {
        refreshCurrent();
        // qDebug("refresh ");
    }
 }
 void AccountView::refreshCurrentSelected()
 {
    if ( !m_currentItem ) return;
    QValueList<RecMailP> headerlist;
    AccountViewItem *view = static_cast<AccountViewItem *>(m_currentItem);
    view->refresh(headerlist);
    emit refreshMailview(headerlist);
    topLevelWidget()->setCaption( i18n ( "KOpieMail/Pi" ) ) ;
 }
 void AccountView::refreshCurrent()
 {
    m_currentItem = currentItem();
    if ( !m_currentItem ) return;
    topLevelWidget()->setCaption( i18n ( "Refreshing %1 ... please wait" ). arg ( m_currentItem->text( 0 ) ) ) ;
    QTimer::singleShot( 500, this, SLOT ( refreshCurrentSelected() ) );
 }
 void AccountView::refreshAll()
 {
 }
 RecBodyP AccountView::fetchBody(const RecMailP&aMail)
 {
    QListViewItem*item = selectedItem ();
    if (!item) return new RecBody();
    AccountViewItem *view = static_cast<AccountViewItem *>(item);
    return view->fetchBody(aMail);
 }
 void AccountView::setupFolderselect(Selectstore*sels)
 {
 #ifndef DESKTOP_VERSION
    sels->showMaximized();
 #else
    sels->show();
 #endif
    QStringList sFolders;
    unsigned int i = 0;
    for (i=0; i < mhAccounts.count();++i)
    {
        mhAccounts[i]->refresh(false);
        sFolders = mhAccounts[i]->subFolders();
        sels->addAccounts(mhAccounts[i]->getWrapper(),sFolders);
    }
    for (i=0; i < imapAccounts.count();++i)
    {
        if (imapAccounts[i]->offline())
            continue;
        imapAccounts[i]->refreshFolders(false);
        sels->addAccounts(imapAccounts[i]->getWrapper(),imapAccounts[i]->subFolders());
    }
 }
 void AccountView::downloadMailsInbox(const FolderP&fromFolder,AbstractMail*fromWrapper)
 {
 #if 0
    AbstractMail*targetMail = 0;
    QString targetFolder = "";
    Selectstore sels;
    setupFolderselect(&sels);
    if (!sels.exec()) return;
    targetMail = sels.currentMail();
    targetFolder = sels.currentFolder();
    if ( (fromWrapper==targetMail && fromFolder->getName()==targetFolder) ||
            targetFolder.isEmpty())
    {
        return;
    }
    if (sels.newFolder() && !targetMail->createMbox(targetFolder))
    {
        QMessageBox::critical(0,i18n("Error creating new Folder"),
                              i18n("<center>Error while creating<br>new folder - breaking.</center>"));
        return;
    }
    int maxsize = 0;
    if ( sels.useSize->isChecked()) 
        maxsize = sels.sizeSpinBox->value();
    fromWrapper->mvcpAllMails(fromFolder,targetFolder,targetMail,sels.moveMails(),  maxsize);
 #endif   
    fromWrapper->downloadNewMails( fromFolder, mhAccounts[0]->getWrapper());   
    refreshCurrent();
 }
 void AccountView::downloadMails(const FolderP&fromFolder,AbstractMail*fromWrapper)
 {
    AbstractMail*targetMail = 0;
    QString targetFolder = "";
    Selectstore sels;
    setupFolderselect(&sels);
    if (!sels.exec()) return;
    targetMail = sels.currentMail();
    targetFolder = sels.currentFolder();
    if ( (fromWrapper==targetMail && fromFolder->getName()==targetFolder) ||
            targetFolder.isEmpty())
    {
        return;
    }
    if (sels.newFolder() && !targetMail->createMbox(targetFolder))
    {
        QMessageBox::critical(0,i18n("Error creating new Folder"),
                              i18n("<center>Error while creating<br>new folder - breaking.</center>"));
        return;
    }
    int maxsize = 0;
    if ( sels.useSize->isChecked()) 
        maxsize = sels.sizeSpinBox->value();
        
    fromWrapper->mvcpAllMails(fromFolder,targetFolder,targetMail,sels.moveMails(),  maxsize);
    refreshCurrent();
 }
 bool AccountView::currentisDraft()
 {
    AccountViewItem *view = static_cast<AccountViewItem *>(currentItem());
    if (!view) return false;
    return view->isDraftfolder();
 }
diff --git a/microkde/kdeui/kmainwindow.cpp b/microkde/kdeui/kmainwindow.cpp
index 3ae4c87..fa678f2 100644
--- a/microkde/kdeui/kmainwindow.cpp
+++ b/microkde/kdeui/kmainwindow.cpp
@@ -1,440 +1,440 @@
 /* This file is part of the KDE libraries
     Copyright
     (C) 2000 Reginald Stadlbauer (reggie@kde.org)
     (C) 1997 Stephan Kulow (coolo@kde.org)
     (C) 1997-2000 Sven Radej (radej@kde.org)
     (C) 1997-2000 Matthias Ettrich (ettrich@kde.org)
     (C) 1999 Chris Schlaeger (cs@kde.org)
     (C) 2002 Joseph Wenninger (jowenn@kde.org)
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License version 2 as published by the Free Software Foundation.
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 #include <qobjectlist.h>
 #include <qstringlist.h>
 #include <qtimer.h>
 #include <qmenubar.h>
 #include <qstatusbar.h>
 #include <qapplication.h>
 
 #include "kdebug.h"
 #include "kmainwindow.h"
 #include "kglobalsettings.h"
 #include "kactioncollection.h"
 class KMainWindowPrivate {
 public:
 //US    bool showHelpMenu:1;
    bool autoSaveSettings:1;
    bool settingsDirty:1;
    bool autoSaveWindowSize:1;
    bool care_about_geometry:1;
    QString autoSaveGroup;
 //US    KAccel * kaccel;
 //US    KMainWindowInterface *m_interface;
    KDEPrivate::ToolBarHandler *toolBarHandler;
    QTimer* settingsTimer;
    KToggleAction *showStatusBarAction;
    QRect defaultWindowSize;
 };
 static bool no_query_exit = false;
-KMainWindow::KMainWindow( QWidget* parent, const char *name, WFlags f )
+KMainWindow::KMainWindow( QWidget* parent, const char *name )
    : QMainWindow( parent, name ) /*LR, f ) with the default widget flag we cannot have fastload */ /*US, KXMLGUIBuilder( this ), helpMenu2( 0 ), factory_( 0 )*/
 {
    mQToolBar = 0;
    initKMainWindow(name);
 }
 void KMainWindow::parseGeometry(bool parsewidth)
 {
 //US the following code is not getting used in the embedded version !! So disable it for now   
 /*US    
    
    assert ( !kapp->geometryArgument().isNull() );
    assert ( d->care_about_geometry );
 #ifndef Q_WS_QWS
    // FIXME: (E) Implement something similar for Qt Embedded (or decide we don't need it)
    int x, y;
    int w, h;
    int m = XParseGeometry( kapp->geometryArgument().latin1(), &x, &y, (unsigned int*)&w, (unsigned int*)&h);
    if (parsewidth) {
        QSize minSize = minimumSize();
        QSize maxSize = maximumSize();
        if ( (m & WidthValue) == 0 )
            w = width();
        if ( (m & HeightValue) == 0 )
            h = height();
         w = QMIN(w,maxSize.width());
         h = QMIN(h,maxSize.height());
         w = QMAX(w,minSize.width());
         h = QMAX(h,minSize.height());
         resize(w, h);
    } else {
        if ( parsewidth && (m & XValue) == 0 )
            x = geometry().x();
        if ( parsewidth && (m & YValue) == 0 )
            y = geometry().y();
        if ( (m & XNegative) )
            x = KApplication::desktop()->width()  + x - w;
        if ( (m & YNegative) )
            y = KApplication::desktop()->height() + y - h;
        move(x, y);
    }
 #endif
 */    
 }
 KMainWindow::~KMainWindow()
 {
    delete d->settingsTimer;
    QMenuBar* mb = internalMenuBar();
    delete mb;
 //US    delete d->m_interface;
    
    delete d;
 //US    memberList->remove( this );
 }
 void KMainWindow::initKMainWindow(const char *name)
 {
    setDockMenuEnabled( FALSE );
 //US     mHelpMenu = 0;
    
 //US    kapp->setTopWidget( this );
    actionCollection()->setWidget( this );
 //US    connect(kapp, SIGNAL(shutDown()), this, SLOT(shuttingDown()));
 //US    if( !memberList )
 //US        memberList = new QPtrList<KMainWindow>;
 /*US    
    if ( !ksm )
        ksm = ksmd.setObject(new KMWSessionManaged());
    // set a unique object name. Required by session management.
    QCString objname;
    QCString s;
    int unusedNumber;
    if ( !name )
        { // no name given
        objname = kapp->instanceName() + "-mainwindow#";
        s = objname + '1'; // start adding number immediately
        unusedNumber = 1;
        }
    else if( name[ strlen( name ) - 1 ] == '#' )
        { // trailing # - always add a number
        objname = name;
        s = objname + '1'; // start adding number immediately
        unusedNumber = 1;
        }
    else
        {
        objname = name;
        s = objname;
        unusedNumber = 0; // add numbers only when needed
        }
    for(;;) {
        QWidgetList* list = kapp->topLevelWidgets();
        QWidgetListIt it( *list );
        bool found = false;
        for( QWidget* w = it.current();
             w != NULL;
             ++it, w = it.current())
            if( w != this && w->name() == s )
                {
                found = true;
                break;
                }
        delete list;
        if( !found )
            break;
        s.setNum( ++unusedNumber );
        s = objname + s;
    }
    setName( s );
    memberList->append( this );
 */
    
    d = new KMainWindowPrivate;
 //US    d->showHelpMenu = true;
    d->settingsDirty = false;
    d->autoSaveSettings = false;
    d->autoSaveWindowSize = true; // for compatibility
 //US    d->kaccel = actionCollection()->kaccel();
    d->toolBarHandler = 0;
    d->settingsTimer = 0;
    d->showStatusBarAction = NULL;
 /*US    
    if ((d->care_about_geometry == beeing_first)) {
        beeing_first = false;
        if ( kapp->geometryArgument().isNull() ) // if there is no geometry, it doesn't mater
            d->care_about_geometry = false;
        else
            parseGeometry(false);
    }
 */    
    d->care_about_geometry = false;
 //US    setCaption( kapp->caption() );
    // attach dcop interface
 //US    d->m_interface = new KMainWindowInterface(this);
 //US    if (!kapp->authorize("movable_toolbars"))
 //US        setDockWindowsMovable(false);
 }
 KAction *KMainWindow::toolBarMenuAction()
 {
  if ( !d->toolBarHandler )
    return 0;
  return d->toolBarHandler->toolBarMenuAction();
 }
 bool KMainWindow::canBeRestored( int number )
 {
 /*US we do not have and want to save sessioninformation. Use info from the default 
 application config.
 */
 //US    if ( !kapp->isRestored() )
 //US        return FALSE;
 //US    KConfig *config = kapp->sessionConfig();
    KConfig *config = KGlobal::config();
    if ( !config )
        return FALSE;
    config->setGroup( QString::fromLatin1("Number") );
    int n = config->readNumEntry( QString::fromLatin1("NumberOfWindows") , 1 );
    return number >= 1 && number <= n;
 }
 const QString KMainWindow::classNameOfToplevel( int number )
 {
 /*US we do not have and want to save sessioninformation. Use info from the default 
 application config.
 */
 //US    if ( !kapp->isRestored() )
 //US        return QString::null;
 //US    KConfig *config = kapp->sessionConfig();
    KConfig *config = KGlobal::config();
    if ( !config )
        return QString::null;
    QString s;
    s.setNum( number );
    s.prepend( QString::fromLatin1("WindowProperties") );
    config->setGroup( s );
    if ( !config->hasKey( QString::fromLatin1("ClassName") ) )
        return QString::null;
    else
        return config->readEntry( QString::fromLatin1("ClassName") );
 }
 bool KMainWindow::restore( int number, bool show )
 {
 /*US we do not have and want to save sessioninformation. Use info from the default 
 application config.
 */
    if ( !canBeRestored( number ) )
        return FALSE;
 //US    KConfig *config = kapp->sessionConfig();
    KConfig *config = KGlobal::config();
    if ( readPropertiesInternal( config, number ) ){
        if ( show )
            KMainWindow::show();
        return FALSE;
    }
    return FALSE;
    
 }
 void KMainWindow::setCaption( const QString &caption )
 {
 //US    setPlainCaption( kapp->makeStdCaption(caption) );
    setPlainCaption( caption );
 }
 void KMainWindow::setCaption( const QString &caption, bool modified )
 {
 //US    setPlainCaption( kapp->makeStdCaption(caption, true, modified) );
    setPlainCaption( caption + "modified:" );
 }
 void KMainWindow::setPlainCaption( const QString &caption )
 {
    QMainWindow::setCaption( caption );
 #ifndef Q_WS_QWS
 //US the following is disabled for the embedded version
 //US    NETWinInfo info( qt_xdisplay(), winId(), qt_xrootwin(), 0 );
 //US    info.setName( caption.utf8().data() );
 #endif
 }
 void KMainWindow::slotStateChanged(const QString &newstate)
 {
  stateChanged(newstate, KXMLGUIClient::StateNoReverse);
 }
 /*
 * Get rid of this for KDE 4.0
 */
 void KMainWindow::slotStateChanged(const QString &newstate,
                                   KXMLGUIClient::ReverseStateChange reverse)
 {
  stateChanged(newstate, reverse);
 }
 void KMainWindow::closeEvent ( QCloseEvent *e )
 {
    //qDebug("MainWindow::closeEvent  ");
    // Save settings if auto-save is enabled, and settings have changed
    if (d->settingsDirty && d->autoSaveSettings)
        saveAutoSaveSettings();
    if (queryClose()) {
        e->accept();
        int not_withdrawn = 0;
 /*US        
        QPtrListIterator<KMainWindow> it(*KMainWindow::memberList);
        for (it.toFirst(); it.current(); ++it){
            if ( !it.current()->isHidden() && it.current()->isTopLevel() && it.current() != this )
                not_withdrawn++;
        }
 */
        if ( !no_query_exit && not_withdrawn <= 0 ) { // last window close accepted?
 /*US            
            if ( queryExit() && !kapp->sessionSaving()) {            // Yes, Quit app?
                // don't call queryExit() twice
                disconnect(kapp, SIGNAL(shutDown()), this, SLOT(shuttingDown()));
                kapp->deref();             // ...and quit aplication.
            }  else {
                // cancel closing, it's stupid to end up with no windows at all....
                e->ignore();
            }
 */
 //US we have no sessionmanagement. Simply close app.
            if ( queryExit() ) {            // Yes, Quit app?
            qDebug("KMainWindow::closeEvent: Exit application ???");
                // don't call queryExit() twice
 //US                disconnect(kapp, SIGNAL(shutDown()), this, SLOT(shuttingDown()));
            } 
            
        }
    }
 }
 bool KMainWindow::queryExit()
 {
    return TRUE;
 }
 bool KMainWindow::queryClose()
 {
    return TRUE;
 }
 void KMainWindow::saveGlobalProperties( KConfig*  )
 {
 }
 void KMainWindow::readGlobalProperties( KConfig*  )
 {
 }
 void KMainWindow::savePropertiesInternal( KConfig *config, int number )
 {
    bool oldASWS = d->autoSaveWindowSize;
    d->autoSaveWindowSize = true; // make saveMainWindowSettings save the window size
    QString s;
    s.setNum(number);
    s.prepend(QString::fromLatin1("WindowProperties"));
    config->setGroup(s);
    // store objectName, className, Width and Height  for later restoring
    // (Only useful for session management)
    config->writeEntry(QString::fromLatin1("ObjectName"), name());
    config->writeEntry(QString::fromLatin1("ClassName"), className());
    saveMainWindowSettings(config); // Menubar, statusbar and Toolbar settings.
    s.setNum(number);
    config->setGroup(s);
    saveProperties(config);
    d->autoSaveWindowSize = oldASWS;
 }
 void KMainWindow::setStandardToolBarMenuEnabled( bool enable )
 {
  if ( enable )
  {
    if ( d->toolBarHandler )
      return;
  d->toolBarHandler = new KDEPrivate::ToolBarHandler( this );
 /*US  if ( factory() )
    factory()->addClient( d->toolBarHandler );
 */    
  }
  else
  {
    if ( !d->toolBarHandler )
      return;
 /*US
    if ( factory() )
      factory()->removeClient( d->toolBarHandler );
 */
    delete d->toolBarHandler;
    d->toolBarHandler = 0;
  }
  
 }
 bool KMainWindow::isStandardToolBarMenuEnabled() const
 {
    return ( d->toolBarHandler != 0 );
 }
 void KMainWindow::createStandardStatusBarAction(){
  if(!d->showStatusBarAction){
    d->showStatusBarAction = KStdAction::showStatusbar(this, SLOT(setSettingsDirty()), actionCollection());
    connect(d->showStatusBarAction, SIGNAL(toggled(bool)), statusBar(), SLOT(setShown(bool)));
    if(internalStatusBar())
      d->showStatusBarAction->setChecked(!internalStatusBar()->isHidden());
  }
 }
 QToolBar *KMainWindow::tBar(  )
 {
    if  ( ! mQToolBar )
      mQToolBar =   new QToolBar( this );
    return mQToolBar;
 }
 KToolBar *KMainWindow::toolBar( const char * name )
 {
   
    if (!name)
       name = "mainToolBar";
    KToolBar *tb = (KToolBar*)child( name, "KToolBar" );
    if ( tb )
        return tb;
    bool honor_mode = (name == "mainToolBar");
@@ -466,530 +466,531 @@ void KMainWindow::setAutoSaveSettings( const QString & groupName, bool saveWindo
    d->autoSaveSettings = true;
    d->autoSaveGroup = groupName;
    d->autoSaveWindowSize = saveWindowSize;
    // Get notified when the user moves a toolbar around
 //US    connect( this, SIGNAL( dockWindowPositionChanged( QDockWindow * ) ),
 //US             this, SLOT( setSettingsDirty() ) );
    connect( this, SIGNAL( toolBarPositionChanged(QToolBar *) ),
             this, SLOT( setSettingsDirty() ) );
             
    // Get default values
 //US    int scnum = QApplication::desktop()->screenNumber(parentWidget());
 //US    QRect desk = QApplication::desktop()->screenGeometry(scnum);
    QRect desk = KGlobalSettings::desktopGeometry(0);
    
    d->defaultWindowSize = QRect(desk.width(), width(), desk.height(), height());
    // Now read the previously saved settings
    applyMainWindowSettings( KGlobal::config(), groupName );
 }
 void KMainWindow::resetAutoSaveSettings()
 {
    d->autoSaveSettings = false;
    if ( d->settingsTimer )
        d->settingsTimer->stop();
 }
 bool KMainWindow::autoSaveSettings() const
 {
    return d->autoSaveSettings;
 }
 QString KMainWindow::autoSaveGroup() const
 {
    return d->autoSaveGroup;
 }
 void KMainWindow::saveAutoSaveSettings()
 {
    ASSERT( d->autoSaveSettings );
    //kdDebug(200) << "KMainWindow::saveAutoSaveSettings -> saving settings" << endl;
    saveMainWindowSettings( KGlobal::config(), d->autoSaveGroup );
    KGlobal::config()->sync();
    d->settingsDirty = false;
    if ( d->settingsTimer )
        d->settingsTimer->stop();
 }
 void KMainWindow::createGUI( const QString &xmlfile, bool _conserveMemory )
 {
    // disabling the updates prevents unnecessary redraws
    setUpdatesEnabled( false );
    // just in case we are rebuilding, let's remove our old client
 //US    guiFactory()->removeClient( this );
    // make sure to have an empty GUI
    QMenuBar* mb = internalMenuBar();
    if ( mb )
        mb->clear();
    (void)toolBarIterator(); // make sure toolbarList is most-up-to-date
    toolbarList.setAutoDelete( true );
    toolbarList.clear();
    toolbarList.setAutoDelete( false );
 /*US
    // don't build a help menu unless the user ask for it
    if (d->showHelpMenu) {
        // we always want a help menu
        if (helpMenu2 == 0)
            helpMenu2 = new KHelpMenu(this, instance()->aboutData(), true,
                                      actionCollection());
    }
    // we always want to load in our global standards file
    setXMLFile( locate( "config", "ui/ui_standards.rc", instance() ) );
    // now, merge in our local xml file.  if this is null, then that
    // means that we will be only using the global file
    if ( !xmlfile.isNull() ) {
        setXMLFile( xmlfile, true );
    } else {
        QString auto_file(instance()->instanceName() + "ui.rc");
        setXMLFile( auto_file, true );
    }
    // make sure we don't have any state saved already
    setXMLGUIBuildDocument( QDomDocument() );
    // do the actual GUI building
    guiFactory()->addClient( this );
    // try and get back *some* of our memory
    if ( _conserveMemory )
    {
      // before freeing the memory allocated by the DOM document we also
      // free all memory allocated internally in the KXMLGUIFactory for
      // the menubar and the toolbars . This however implies that we
      // have to take care of deleting those widgets ourselves. For
      // destruction this is no problem, but when rebuilding we have
      // to take care of that (and we want to rebuild the GUI when
      // using stuff like the toolbar editor ).
      // In addition we have to take care of not removing containers
      // like popupmenus, defined in the XML document.
      // this code should probably go into a separate method in KMainWindow.
      // there's just one problem: I'm bad in finding names ;-) , so
      // I skipped this ;-)
      QDomDocument doc = domDocument();
      QDomElement e = doc.documentElement().firstChild().toElement();
      for (; !e.isNull(); e = e.nextSibling().toElement() ) {
          if ( e.tagName().lower() == "toolbar" )
              factory_->resetContainer( e.attribute( "name" ) );
          else if ( e.tagName().lower() == "menubar" )
              factory_->resetContainer( e.tagName(), true );
      }
      conserveMemory();
    }
 */
    setUpdatesEnabled( true );
    updateGeometry();
 }
 void KMainWindow::saveMainWindowSettings(KConfig *config, const QString &configGroup)
 {
    kdDebug(200) << "KMainWindow::saveMainWindowSettings " << configGroup << endl;
 //US    QStrList entryList;
    QStringList entryList;
    QString oldGroup;
    if (!configGroup.isEmpty())
    {
       oldGroup = config->group();
       config->setGroup(configGroup);
    }
    // Called by session management - or if we want to save the window size anyway
    if ( d->autoSaveWindowSize )
        saveWindowSize( config );
    QStatusBar* sb = internalStatusBar();
    if (sb) {
        entryList.clear();
        if ( sb->isHidden() )
            entryList.append("Disabled");
        else
            entryList.append("Enabled");
        if(sb->isHidden())
        //US  config->writeEntry(QString::fromLatin1("StatusBar"), entryList, ';');
          config->writeEntry(QString::fromLatin1("StatusBar"), entryList);
        else
          config->deleteEntry(QString::fromLatin1("StatusBar"));
    }
    QMenuBar* mb = internalMenuBar();
    if (mb) {
        entryList.clear();
        if ( mb->isHidden() )
            entryList.append("Disabled");
        else
            entryList.append("Enabled");
        // By default we don't hide.
        if(mb->isHidden())
        //US  config->writeEntry(QString::fromLatin1("MenuBar"), entryList, ';');
          config->writeEntry(QString::fromLatin1("MenuBar"), entryList);
        else
          config->deleteEntry(QString::fromLatin1("MenuBar"));
    }
    int n = 1; // Toolbar counter. toolbars are counted from 1,
    KToolBar *toolbar = 0;
    QPtrListIterator<KToolBar> it( toolBarIterator() );
    while ( ( toolbar = it.current() ) ) {
        ++it;
        QString group;
        if (!configGroup.isEmpty())
        {
           // Give a number to the toolbar, but prefer a name if there is one,
           // because there's no real guarantee on the ordering of toolbars
           group = (!::qstrcmp(toolbar->name(), "unnamed") ? QString::number(n) : QString(" ")+toolbar->name());
           group.prepend(" Toolbar");
           group.prepend(configGroup);
        }
        toolbar->saveSettings(config, group);
        n++;
    }
    if (!configGroup.isEmpty())
       config->setGroup(oldGroup);
 }
 bool KMainWindow::readPropertiesInternal( KConfig *config, int number )
 {
    if ( number == 1 )
        readGlobalProperties( config );
    // in order they are in toolbar list
    QString s;
    s.setNum(number);
    s.prepend(QString::fromLatin1("WindowProperties"));
    config->setGroup(s);
    // restore the object name (window role)
    if ( config->hasKey(QString::fromLatin1("ObjectName" )) )
        setName( config->readEntry(QString::fromLatin1("ObjectName")).latin1()); // latin1 is right here
    applyMainWindowSettings(config); // Menubar, statusbar and toolbar settings.
    s.setNum(number);
    config->setGroup(s);
    readProperties(config);
    return true;
 }
 void KMainWindow::applyMainWindowSettings(KConfig *config, const QString &configGroup)
 {
    kdDebug(200) << "KMainWindow::applyMainWindowSettings" << endl;
    QString entry;
 //US    QStrList entryList;
    QStringList entryList;
    int i = 0; // Number of entries in list
    if (!configGroup.isEmpty())
       config->setGroup(configGroup);
    restoreWindowSize(config);
    QStatusBar* sb = internalStatusBar();
    if (sb) {
        entryList.clear();
 //US        i = config->readListEntry (QString::fromLatin1("StatusBar"), entryList, ';');
        entryList = config->readListEntry (QString::fromLatin1("StatusBar"));
        entry = entryList.first();
        if (entry == QString::fromLatin1("Disabled"))
           sb->hide();
        else
           sb->show();
        if(d->showStatusBarAction)
           d->showStatusBarAction->setChecked(!sb->isHidden());
    }
    QMenuBar* mb = internalMenuBar();
    if (mb) {
        entryList.clear();
 //US        i = config->readListEntry (QString::fromLatin1("MenuBar"), entryList, ';');
        entryList = config->readListEntry (QString::fromLatin1("MenuBar"));
        entry = entryList.first();
        if (entry==QString::fromLatin1("Disabled"))
        {
            mb->hide(); 
        } else
        {
            mb->show();
        }
    }
        int n = 1; // Toolbar counter. toolbars are counted from 1,
        KToolBar *toolbar;
        QPtrListIterator<KToolBar> it( toolBarIterator() ); // must use own iterator
        for ( ; it.current(); ++it) {
            toolbar= it.current();
            QString group;
            if (!configGroup.isEmpty())
            {
               // Give a number to the toolbar, but prefer a name if there is one,
               // because there's no real guarantee on the ordering of toolbars
               group = (!::qstrcmp(toolbar->name(), "unnamed") ? QString::number(n) : QString(" ")+toolbar->name());
               group.prepend(" Toolbar");
               group.prepend(configGroup);
            }
            toolbar->applySettings(config, group);
            n++;
        }
    finalizeGUI( true );
    }
 void KMainWindow::finalizeGUI( bool force )
 {
    //kdDebug(200) << "KMainWindow::finalizeGUI force=" << force << endl;
    // The whole reason for this is that moveToolBar relies on the indexes
    // of the other toolbars, so in theory it should be called only once per
    // toolbar, but in increasing order of indexes.
    // Since we can't do that immediately, we move them, and _then_
    // we call positionYourself again for each of them, but this time
    // the toolbariterator should give them in the proper order.
    // Both the XMLGUI and applySettings call this, hence "force" for the latter.
    QPtrListIterator<KToolBar> it( toolBarIterator() );
    for ( ; it.current() ; ++ it )
            it.current()->positionYourself( force );
    d->settingsDirty = false;
 }
 void KMainWindow::saveWindowSize( KConfig * config ) const
 {
 /*US  
  int scnum = QApplication::desktop()->screenNumber(parentWidget());
  QRect desk = QApplication::desktop()->screenGeometry(scnum);
 */
  QRect desk = KGlobalSettings::desktopGeometry(0);
  
  QRect size( desk.width(), width(), desk.height(), height() );
  if(size != d->defaultWindowSize){
    config->writeEntry(QString::fromLatin1("Width %1").arg(desk.width()), width() );
    config->writeEntry(QString::fromLatin1("Height %1").arg(desk.height()), height() );
  }
  else{
    config->deleteEntry(QString::fromLatin1("Width %1").arg(desk.width()));
    config->deleteEntry(QString::fromLatin1("Height %1").arg(desk.height()));
  }
 }
 void KMainWindow::restoreWindowSize( KConfig * config )
 {
    if (d->care_about_geometry) {
        parseGeometry(true);
    } else {
        // restore the size
 /*US        int scnum = QApplication::desktop()->screenNumber(parentWidget());
        QRect desk = QApplication::desktop()->screenGeometry(scnum);
 */        
        QRect desk = KGlobalSettings::desktopGeometry(0);
        
        QSize size( config->readNumEntry( QString::fromLatin1("Width %1").arg(desk.width()), 0 ),
                    config->readNumEntry( QString::fromLatin1("Height %1").arg(desk.height()), 0 ) );
        if (size.isEmpty()) {
            // try the KDE 2.0 way
            size = QSize( config->readNumEntry( QString::fromLatin1("Width"), 0 ),
                          config->readNumEntry( QString::fromLatin1("Height"), 0 ) );
            if (!size.isEmpty()) {
                // make sure the other resolutions don't get old settings
                config->writeEntry( QString::fromLatin1("Width"), 0 );
                config->writeEntry( QString::fromLatin1("Height"), 0 );
            }
        }
        if ( !size.isEmpty() )
            resize( size );
    }
 }
 bool KMainWindow::initialGeometrySet() const
 {
    return d->care_about_geometry;
 }
 void KMainWindow::ignoreInitialGeometry()
 {
    d->care_about_geometry = false;
 }
 void KMainWindow::setSettingsDirty()
 {
    //kdDebug(200) << "KMainWindow::setSettingsDirty" << endl;
    d->settingsDirty = true;
    if ( d->autoSaveSettings )
    {
        // Use a timer to save "immediately" user-wise, but not too immediately
        // (to compress calls and save only once, in case of multiple changes)
        if ( !d->settingsTimer )
        {
           d->settingsTimer = new QTimer( this );
           connect( d->settingsTimer, SIGNAL( timeout() ), SLOT( saveAutoSaveSettings() ) );
        }
        d->settingsTimer->start( 500, true );
    }
 }
 bool KMainWindow::settingsDirty() const
 {
    return d->settingsDirty;
 }
 QString KMainWindow::settingsGroup() const
 {
    return d->autoSaveGroup;
 }
-void KMainWindow::resizeEvent( QResizeEvent * )
+void KMainWindow::resizeEvent( QResizeEvent * e)
 {
    if ( d->autoSaveWindowSize )
-        setSettingsDirty();
+        setSettingsDirty(); 
+    QMainWindow::resizeEvent( e ); 
 }
 bool KMainWindow::hasMenuBar()
 {
        return (internalMenuBar());
 }
 //US KMenuBar *KMainWindow::menuBar()
 QMenuBar *KMainWindow::menuBar()
 {
 //US    KMenuBar * mb = internalMenuBar();
    QMenuBar * mb = internalMenuBar();
    if ( !mb ) {
 //US        mb = new KMenuBar( this );
        mb = new QMenuBar( this );
        // trigger a re-layout and trigger a call to the private
        // setMenuBar method.
        QMainWindow::menuBar();
    }
    return mb;
 }
 //US KStatusBar *KMainWindow::statusBar()
 QStatusBar *KMainWindow::statusBar()
 {
 //US    KStatusBar * sb = internalStatusBar();
    QStatusBar * sb = internalStatusBar();
    if ( !sb ) {
 //US        sb = new KStatusBar( this );
        sb = new QStatusBar( this );
        // trigger a re-layout and trigger a call to the private
        // setStatusBar method.
        QMainWindow::statusBar();
    }
    return sb;
 }
 void KMainWindow::shuttingDown()
 {
    // Needed for Qt <= 3.0.3 at least to prevent reentrancy
    // when queryExit() shows a dialog. Check before removing!
    static bool reentrancy_protection = false;
    if (!reentrancy_protection)
    {
       reentrancy_protection = true;
       // call the virtual queryExit
       queryExit();
       reentrancy_protection = false;
    }
 }
 //US KMenuBar *KMainWindow::internalMenuBar()
 QMenuBar *KMainWindow::internalMenuBar()
 {
 //US    QObjectList *l = queryList( "KMenuBar", 0, false, false );
    QObjectList *l = queryList( "QMenuBar", 0, false, false );
    if ( !l || !l->first() ) {
        delete l;
        return 0;
    }
 //US    KMenuBar *m = (KMenuBar*)l->first();
    QMenuBar *m = (QMenuBar*)l->first();
    delete l;
    return m;
 }
 //US KStatusBar *KMainWindow::internalStatusBar()
 QStatusBar *KMainWindow::internalStatusBar()
 {
 //US    QObjectList *l = queryList( "KStatusBar", 0, false, false );
    QObjectList *l = queryList( "QStatusBar", 0, false, false );
    if ( !l || !l->first() ) {
        delete l;
        return 0;
    }
 //US    KStatusBar *s = (KStatusBar*)l->first();
    QStatusBar *s = (QStatusBar*)l->first();
    delete l;
    return s;
 }
 void KMainWindow::childEvent( QChildEvent* e)
 {
    QMainWindow::childEvent( e );
 }
-void KMainWindow::paintEvent( QPaintEvent * )
+void KMainWindow::paintEvent( QPaintEvent * e)
 {
-    // do nothing
+    QMainWindow::paintEvent( e );
 }
 QSize KMainWindow::sizeForCentralWidgetSize(QSize size)
 {
    KToolBar *tb = (KToolBar*)child( "mainToolBar", "KToolBar" );
    if (tb && !tb->isHidden()) {
        switch( tb->barPos() )
        {
          case KToolBar::Top:
          case KToolBar::Bottom:
            size += QSize(0, tb->sizeHint().height());
            break;
          case KToolBar::Left:
          case KToolBar::Right:
            size += QSize(toolBar()->sizeHint().width(), 0);
            break;
          case KToolBar::Flat:
 //US            size += QSize(0, 3+kapp->style().pixelMetric( QStyle::PM_DockWindowHandleExtent ));
            size += QSize(0, tb->sizeHint().height());
            break;
          default:
            break;
        }
    }
 //US    KMenuBar *mb = menuBar();
    QMenuBar *mb = menuBar();
    if (!mb->isHidden()) {
        size += QSize(0,mb->heightForWidth(size.width()));
 /*US        if (style().styleHint(QStyle::SH_MainWindow_SpaceBelowMenuBar, this))
           size += QSize( 0, dockWindowsMovable() ? 1 : 2);
 */           
           size += QSize( 0, 2);
    }
    QStatusBar *sb = internalStatusBar();
    if( sb && !sb->isHidden() )
       size += QSize(0, sb->sizeHint().height());
    return size;
 }
 // why do we support old gcc versions? using KXMLGUIBuilder::finalizeGUI;
 void KMainWindow::finalizeGUI( KXMLGUIClient *client )
 { /*US KXMLGUIBuilder::finalizeGUI( client );*/ }
 void KMainWindow::virtual_hook( int id, void* data )
 { /*US KXMLGUIBuilder::virtual_hook( id, data );*/
  KXMLGUIClient::virtual_hook( id, data ); }
diff --git a/microkde/kdeui/kmainwindow.h b/microkde/kdeui/kmainwindow.h
index 2aafb9d..2dc8033 100644
--- a/microkde/kdeui/kmainwindow.h
+++ b/microkde/kdeui/kmainwindow.h
@@ -1,481 +1,481 @@
 /*
    This file is part of the KDE libraries
    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Library General Public
    License version 2 as published by the Free Software Foundation.
    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    Library General Public License for more details.
    You should have received a copy of the GNU Library General Public License
    along with this library; see the file COPYING.LIB.  If not, write to
    the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
    Boston, MA 02111-1307, USA.
    $Id$
 */
 #ifndef KMAINWINDOW_H
 #define KMAINWINDOW_H
 /*US
 #include "kxmlguifactory.h"
 #include "kxmlguiclient.h"
 #include "kxmlguibuilder.h"
 #include <qmetaobject.h>
 class KPopupMenu;
 class KXMLGUIFactory;
 class KConfig;
 class KHelpMenu;
 class KStatusBar;
 class QStatusBar;
 class KMenuBar;
 class KMWSessionManaged;
 class KAccel;
 class KToolBarMenuAction;
 */
 class QMenuBar;
 class QStatusBar;
 class KMainWindowPrivate;
 class KAction;
 #include <ktoolbar.h>
 #include <ktoolbarhandler.h>
 #include <kxmlguiclient.h>
 #include <qmainwindow.h>
 #include <qptrlist.h>
 class KActionCollection;
 class KMainWindow : public QMainWindow, virtual public KXMLGUIClient
 {
  Q_OBJECT
 private:
 //US create private defaultconstructor
    KMainWindow() {;};
  
 public:
    /**
     * Construct a main window.
     *
     * @param parent The widget parent. This is usually 0 but it may also be the window
     * group leader. In that case, the KMainWindow becomes sort of a
     * secondary window.
     *
     * @param name The object name. For session management and window management to work
     * properly, all main windows in the application should have a
     * different name. When passing 0 (the default), KMainWindow will create
     * a unique name, but it's recommended to explicitly pass a window name that will
     * also describe the type of the window. If there can be several windows of the same
     * type, append '#' (hash) to the name, and KMainWindow will append numbers to make
     * the names unique. For example, for a mail client which has one main window showing
     * the mails and folders, and which can also have one or more windows for composing
     * mails, the name for the folders window should be e.g. "mainwindow" and
     * for the composer windows "composer#".
     *
     * @param f Specify the widget flags. The default is
     * WType_TopLevel and WDestructiveClose.  TopLevel indicates that a
     * main window is a toplevel window, regardless of whether it has a
     * parent or not. DestructiveClose indicates that a main window is
     * automatically destroyed when its window is closed. Pass 0 if
     * you do not want this behavior.
     *
     * KMainWindows must be created on the heap with 'new', like:
     *  <pre> KMainWindow *kmw = new KMainWindow (...</pre>
     **/
    //LR remove  WDestructiveClose
-    KMainWindow( QWidget* parent = 0, const char *name = 0, WFlags f = WType_TopLevel /*| WDestructiveClose*/ );
+    KMainWindow( QWidget* parent = 0, const char *name = 0 ); //, WFlags f = WType_TopLevel /*| WDestructiveClose*/ ;
    /**
     * Destructor.
     *
     * Will also destroy the toolbars, and menubar if
     * needed.
     */
    virtual ~KMainWindow();
    /**
     * Retrieve the standard help menu.
     *
     * It contains entires for the
     * help system (activated by F1), an optional "What's This?" entry
     * (activated by Shift F1), an application specific dialog box,
     * and an "About KDE" dialog box.
     *
     * Example (adding a standard help menu to your application):
     * <pre>
     * KPopupMenu *help = helpMenu( <myTextString> );
     * menuBar()->insertItem( i18n("&Help"), help );
     * </pre>
     *
     * @param aboutAppText The string that is used in the application
     *        specific dialog box. If you leave this string empty the
     *        information in the global @ref KAboutData of the
     *        application will be used to make a standard dialog box.
     *
     * @param showWhatsThis Set this to false if you do not want to include
     *        the "What's This" menu entry.
     *
     * @return A standard help menu.
     */
 //US    KPopupMenu* helpMenu( const QString &aboutAppText = QString::null,
 //US    bool showWhatsThis = TRUE );
    /**
     * Returns the help menu. Creates a standard help menu if none exists yet.
     *
     * It contains entries for the
     * help system (activated by F1), an optional "What's This?" entry
     * (activated by Shift F1), an application specific dialog box,
     * and an "About KDE" dialog box. You must create the application
     * specific dialog box yourself. When the "About application"
     * menu entry is activated, a signal will trigger the
     * @ref showAboutApplication slot. See @ref showAboutApplication for more
     * information.
     *
     * Example (adding a help menu to your application):
     * <pre>
     * menuBar()->insertItem( i18n("&Help"), customHelpMenu() );
     * </pre>
     *
     * @param showWhatsThis Set this to @p false if you do not want to include
     *        the "What's This" menu entry.
     *
     * @return A standard help menu.
     */
 //US    KPopupMenu* customHelpMenu( bool showWhatsThis = TRUE );
    /**
     * @sect Session Management
     *
     * Try to restore the toplevel widget as defined by the number (1..X).
     *
     * If the session did not contain so high a number, the configuration
     * is not changed and @p false returned.
     *
     * That means clients could simply do the following:
     * <pre>
     * if (kapp->isRestored()){
     *   int n = 1;
     *   while (KMainWindow::canBeRestored(n)){
     *     (new childMW)->restore(n);
     *     n++;
     *   }
     * } else {
     * // create default application as usual
     * }
     * </pre>
     * Note that @ref QWidget::show() is called implicitly in restore.
     *
     * With this you can easily restore all toplevel windows of your
     * application.
     *
     * If your application uses different kinds of toplevel
     * windows, then you can use @ref KMainWindow::classNameOfToplevel(n)
     * to determine the exact type before calling the childMW
     * constructor in the example from above.
     *
     * If your client has only one kind of toplevel widgets (which
     * should be pretty usual) then you should use the RESTORE-macro
     * for backwards compatibility with 3.1 and 3.0 branches:
     *
     * <pre>
     * if (kapp->isRestored())
     *   RESTORE(childMW)
     * else {
     * // create default application as usual
     * }
     * </pre>
     *
     * The macro expands to the term above but is easier to use and
     * less code to write.
     *
     * For new code or if you have more than one kind of toplevel
     * widget (each derived from @ref KMainWindow, of course), you can
     * use the templated @ref kRestoreMainWindows global functions:
     *
     * <pre>
     * if (kapp->isRestored())
     *   kRestoreMainWindows< childMW1, childMW2, childMW3 >();
     * else {
     * // create default application as usual
     * }
     * </pre>
     *
     * Currently, these functions are provided for up to three
     * template arguments. If you need more, tell us. To help you in
     * deciding whether or not you can use @ref kRestoreMainWindows, a
     * define KDE_RESTORE_MAIN_WINDOWS_NUM_TEMPLATE_ARGS is provided.
     *
     * @see restore()
     * @see classNameOfToplevel()
     *
     **/
    static bool canBeRestored( int number );
    /**
     * Returns the @ref className() of the @p number of the toplevel window which
     * should be restored.
     *
     *  This is only useful if your application uses
     * different kinds of toplevel windows.
     */
    static const QString classNameOfToplevel( int number );
    /**
     * Restore the session specified by @p number.
     *
     * Returns @p false if this
     * fails, otherwise returns @p true and shows the window.
     * You should call @ref canBeRestored() first.
     * If @p show is true (default), this widget will be shown automatically.
     */
    bool restore( int number, bool show = TRUE );
 //US    virtual KXMLGUIFactory *guiFactory();
    /**
     * Create a GUI given a local XML file.
     *
     * If @p xmlfile is NULL,
     * then it will try to construct a local XML filename like
     * appnameui.rc where 'appname' is your app's name.  If that file
     * does not exist, then the XML UI code will only use the global
     * (standard) XML file for the layout purposes.
     *
     * Note that when passing true for the conserveMemory argument subsequent
     * calls to guiFactory()->addClient/removeClient may not work as expected.
     * Also retrieving references to containers like popup menus or toolbars using
     * the container method will not work.
     *
     * @param xmlfile The local xmlfile (relative or absolute)
     * @param _conserveMemory Specify whether createGUI() should call
     *     @ref KXMLGuiClient::conserveMemory() to free all memory
     *     allocated by the @ref QDomDocument and by the KXMLGUIFactory.
     */
    void createGUI( const QString &xmlfile = QString::null, bool _conserveMemory = TRUE );
    /**
     * Enables the build of a standard help menu when calling createGUI().
     *
     * The default behavior is to build one, you must call this function
     * to disable it
     */
    void setHelpMenuEnabled(bool showHelpMenu = true);
    /**
     * Return @p true when the help menu is enabled
     */
    bool isHelpMenuEnabled();
    /**
     * Returns true, if there is a menubar
     * @since 3.1
     */
     bool hasMenuBar();
    /**
     * Returns a pointer to the menu bar.
     *
     * If there is no menu bar yet one will be created.
     **/
 //US    KMenuBar *menuBar();
    QMenuBar *menuBar();
    /**
     * Returns a pointer to the status bar.
     *
     *  If there is no
     * status bar yet one will be created.
     */
 //US    KStatusBar *statusBar();
    QStatusBar *statusBar();
    /**
     * List of members of KMainWindow class.
     */
 //US    static QPtrList<KMainWindow>* memberList;
    /**
     * Returns a pointer to the toolbar with the specified name.
     * This refers to toolbars created dynamically from the XML UI
     * framework.  If the toolbar does not exist one will be created.
     *
     * @param name The internal name of the toolbar. If no name is
     *             specified "mainToolBar" is assumed.
     *
     * @return A pointer to the toolbar
     **/
    KToolBar *toolBar( const char *name=0 );
    // method for getting rid of KDE-Crap
    QToolBar *tBar( );
    /**
     * @return An iterator over the list of all toolbars for this window.
     */
    QPtrListIterator<KToolBar> toolBarIterator();
    /**
     * @return A KAccel instance bound to this mainwindow. Used automatically
     * by KAction to make keybindings work in all cases.
     */
    KAccel *accel();
    void setFrameBorderWidth( int ) {}
    /**
     * Call this to enable "auto-save" of toolbar/menubar/statusbar settings
     * (and optionally window size).
     * If the *bars were moved around/shown/hidden when the window is closed,
     * saveMainWindowSettings( KGlobal::config(), groupName ) will be called.
     *
     * @param groupName a name that identifies this "type of window".
     * You can have several types of window in the same application.
     *
     * @param saveWindowSize set it to true to include the window size
     * when saving.
     *
     * Typically, you will call setAutoSaveSettings() in your
     * KMainWindow-inherited class constructor, and it will take care
     * of restoring and saving automatically. Make sure you call this
     * _after all_ your *bars have been created.
     */
    void setAutoSaveSettings( const QString & groupName = QString::fromLatin1("MainWindow"),
                              bool saveWindowSize = true );
    /**
     * Disable the auto-save-settings feature.
     * You don't normally need to call this, ever.
     */
    void resetAutoSaveSettings();
    /**
     * @return the current autosave setting, i.e. true if setAutoSaveSettings() was called,
     * false by default or if resetAutoSaveSettings() was called.
     * @since 3.1
     */
    bool autoSaveSettings() const;
    /**
     * @return the group used for setting-autosaving.
     * Only meaningful if setAutoSaveSettings() was called.
     * This can be useful for forcing a save or an apply, e.g. before and after
     * using KEditToolbar.
     * @since 3.1
     */
    QString autoSaveGroup() const;
    /**
     * Read settings for statusbar, menubar and toolbar from their respective
     * groups in the config file and apply them.
     *
     * @param config Config file to read the settings from.
     * @param groupName Group name to use. If not specified, the last used
     * group name is used.
     */
    void applyMainWindowSettings(KConfig *config, const QString &groupName = QString::null);
    /**
     * Save settings for statusbar, menubar and toolbar to their respective
     * groups in the config file @p config.
     *
     * @param config Config file to save the settings to.
     * @param groupName Group name to use. If not specified, the last used
     * group name is used
     */
    void saveMainWindowSettings(KConfig *config, const QString &groupName = QString::null);
    /**
     * Sets whether KMainWindow should provide a menu that allows showing/hiding
     * the available toolbars ( using @ref KToggleToolBarAction ) . In case there
     * is only one toolbar configured a simple 'Show <toolbar name here>' menu item
     * is shown.
     *
     * The menu / menu item is implemented using xmlgui. It will be inserted in your
     * menu structure in the 'Settings' menu.
     *
     * If your application uses a non-standard xmlgui resource file then you can
     * specify the exact position of the menu / menu item by adding a
     * &lt;Merge name="StandardToolBarMenuHandler" /&gt;
     * line to the settings menu section of your resource file ( usually appname.rc ).
     *
     * Note that you should enable this feature before calling createGUI() ( or similar ) .
     * You enable/disable it anytime if you pass false to the conserveMemory argument of createGUI.
     * @since 3.1
     */
    void setStandardToolBarMenuEnabled( bool enable );
    /// @since 3.1
    bool isStandardToolBarMenuEnabled() const;
    /**
     * Sets whether KMainWindow should provide a menu that allows showing/hiding
     * of the statusbar ( using @ref KToggleStatusBarAction ).
     *
     * The menu / menu item is implemented using xmlgui. It will be inserted
     * in your menu structure in the 'Settings' menu.
     *
     * Note that you should enable this feature before calling createGUI()
     * ( or similar ).
     *
     * If an application maintains the action on its own (i.e. never calls
     * this function) a connection needs to be made to let KMainWindow
     * know when that status (hidden/shown) of the statusbar has changed.
     * For example:
     * connect(action, SIGNAL(activated()),
     *         kmainwindow, SLOT(setSettingsDirty()));
     * Otherwise the status (hidden/show) of the statusbar might not be saved
     * by KMainWindow.
     * @since 3.2
     */
    void createStandardStatusBarAction();
    /**
     * Returns a pointer to the mainwindows action responsible for the toolbars menu
     * @since 3.1
     */
    KAction *toolBarMenuAction();
    // why do we support old gcc versions? using KXMLGUIBuilder::finalizeGUI;
    /// @since 3.1
    virtual void finalizeGUI( KXMLGUIClient *client );
    /**
     * @internal
     */
    void finalizeGUI( bool force );
    /**
     * @return true if a -geometry argument was given on the command line,
     * and this is the first window created (the one on which this option applies)
     */
    bool initialGeometrySet() const;
    /**
     * @internal
     * Used from Konqueror when reusing the main window.
     */
    void ignoreInitialGeometry();
    /**
     * @return the size the mainwindow should have so that the central
     * widget will be of @p size.
     */
    QSize sizeForCentralWidgetSize(QSize size);
 public slots:
    /**
     * Makes a KDE compliant caption.