6 files changed, 29 insertions, 15 deletions

diff --git a/bin/kdepim/korganizer/germantranslation.txt b/bin/kdepim/korganizer/germantranslation.txt
index ab6d220..58be545 100644
--- a/bin/kdepim/korganizer/germantranslation.txt
+++ b/bin/kdepim/korganizer/germantranslation.txt
@@ -1,1292 +1,1300 @@
 { "10 minutes","10 Minuten" },
 { "10th","10." },
 { "11th","11." },
 { "12 pm Format","12 AM/PM Format" },
 { "12th","12." },
 { "13th","13." },
 { "14th","14." },
 { "15th","15." },
 { "16th","16." },
 { "17th","17." },
 { "18th","18." },
 { "19th","19." },
 { "1 Day","1 Tag" },
 { "1 h","1 Std" },
 { "1 (high)","1 (hoch)" },
 { "5 (low)","5" },
 { "1st","1." },
 { "20th","20." },
 { "21st","21." },
 { "22nd","22." },
 { "23rd","23." },
 { "24:00 Hour Format","24:00 Stunden Format" },
 { "24th","24." },
 { "25th","25." },
 { "26th","26." },
 { "27th","27." },
 { "28th","28." },
 { "29th","29." },
 { "2nd","2." },
 { "30 minutes","30 Minuten" },
 { "30th","30." },
 { "31st","31." },
 { "3rd","3." },
 { "4th","4." },
 { "5 (lowest)","5 (Niedrigster)" },
 { "5th","5." },
 { "6th","6." },
 { "7th","7." },
 { "8th","8." },
 { "9th","9." },
 { "About...","Über..." },
 { "&Accept","&Akzeptieren" },
 { "Accept","Akzeptieren" },
 { "Accept A&ll","A&lles Akzepieren" },
 { "Access:","Zugriff:" },
 { "A corresponding event is missing in your calendar!","Ein zugehöriger Termin fehlt in ihrem Kalender!" },
 { "Actions","Aktionen" },
 { "Add Filter","Filter Hinzufügen" },
 { "&Add","Hinzufügen" },
 { "Add","Hinzufügen" },
 { "Additional email addresses:","Zusätzliche E-Mail Adressen:" },
 { "Additional email address:","Zusätzliche E-Mail Adresse:" },
 { "&Addressbook","&Adressbuch" },
 { "Address &Book...","Adress&buch..." },
 { "Agenda Size","Agende Größe" },
 { "Agenda Size:","Größe der Agenda:" },
 { "Agenda view:","Agenda Ansicht:" },
 { "Agenda view background color:","Hintergrund der Agenda Ansicht:" },
 { "All attendees","Alle Teilnehmer" },
 { "AllDayAgenda Height:","Höhe Ganztages Agenda:" },
 { "All day event","Ganztägig" },
 { "Anonymous","Anonym" },
 { "Apply","Anwenden" },
 { "Apr","Apr" },
 { "April","April" },
 {"Ask for every entry on conflict","Frage bei Konflikten nach"},
 { "Ask for preferences before syncing","Vor dem Syncronisieren nachfragen" },
 { "Ask for quit when closing KO/Pi","Vor dem Beenden von KO/Pi nachfragen" },
 { "Attendees","Teilnehmer" },
 { "Aug","Aug" },
 { "August","August" },
 { "Auto-Save","Automatisches Abspeichern" },
 { "Auto save delay in minutes:","Verzög.autom.Speichern in Min" },
 { "Auto saving...","Automatische Sicherung..." },
 { "Begin on:","Starte mit:" },
 { "Begins on: %1","Starte mit: %1" },
 { "<b>From:</b> %1 <b>To:</b> %2","<b>Vom:</b> %1 <b>Zum:</b> %2" },
 { "<b>On:</b> %1","<b>Am:</b> %1" },
 { "<b>On:</b> %1 <b>From:S</b> %2 <b>To:</b> %3","<b>Am:</b> %1 <b>Vom:S</b> %2 <b>Zum:</b> %3" },
 { "<b>Original event:</b><p>","<b>Original Termin:</b><p>" },
 { " - both are modified after last sync"," - beide wurden nach der letzten Syncronisation verändert" },
 { "Busy","Belegt" },
 { "&Cancel","Abbre&chen" },
 { "Cancel","Abbrechen" },
 { "Cannot delete To-Do\nwhich has children.","Kann Todo nicht löschen,\n da noch Einträge vorhanden sind" },
 { "Can't generate mail:\nNo event selected.","Kann e-Mail nicht erstellen:\nKein Termin ausgewählt." },
 { "Categories...","Kategorien..." },
 { "Categories","Kategorien" },
 { "Category","Kategorie" },
 { "Center View","Zentriere Ansicht" },
 { "Change","Ändere" },
 { "Cinema","Kino" },
 { "Click to add a new Todo","Hier klicken, um ein neues Todo anzulegen" },
 { "Clone Item","Klone Eintrag" },
 { "&Close","S&chließen" },
 { "Close","Schließen" },
 { "Close this dialog to abort deletion!","Zum Abbrechen des Löschvorganges Dialog schließen!" },
 { "Colors","Farben" },
 { "completed","erledigt" },
 { "completed on %1","erledigt am %1" },
 { "Complete","Erledigt" },
 { "Confidential","Vertraulich" },
 { "Configure...","Einstellungen..." },
 { "Confirm &deletes","Löschvogang bestätigen" },
 { "Couldn't load calendar\n '%1'.","Kann Kalender\n '%1' nicht laden." },
 { "Counter-event Viewer","Terminzähler Ansicht" },
 { "Daily ending hour:","Feierabend:" },
 { "Daily starting hour:","Anfangszeit:" },
 { "Daily","Täglich" },
 { "Date Format","Datums Format" },
 { "Date Format:","Datums Format:" },
 { "DateNavigator:(nr)","Datums Navigator" },
 { "Dates: ","Datum: " },
 { "Date && Time","Datum && Zeit" },
 { "Day begins at:","Der Tag beginnt um:" },
 { "Days in Next-X-Days:","Tage in Nächste-X-Tage:" },
 { "Days in What's Next:","Tage in What's Next:" },
 { "day(s)","Tag(e)" },
 { "Days to show in Next-X-Days view:","Welche Tage in Nächste-X-Tagen anzeigen:" },
 { "day","Tag" },
 { "Dec","Dez" },
 { "December","Dezember" },
 { "Default alarm time:","Standard Alarmzeit:" },
 { "Default appointment time:","Standard Termin Startzeit:" },
 { "Default event color:","Standard Terminfarbe:"   },
 { "Default","Standard" },
 { "Def. duration of new app.:","Standard Termin Länge:" },
 { "Delete all completed To-Dos?","Alle bereits erledigten Todos löschen?" },
 { "Delete All","Lösche alles" },
 { "Delete all selected","Lösche alle Selektierten" },
 { "Delete Current","Aktuellen löschen" },
 { "Delete Event...","Lösche Termin..." },
 { "Delete Event","Lösche Termin" },
 { "&Delete","Löschen" },
 { "Delete...","Löschen..." },
 { "Delete","Löschen" },
 { "Delete Todo...","Lösche Todo..." },
 { "Delete To-Do","Lösche Todo" },
 { "Deleting item %d ...","Lösche Eintrag %d..." },
 { "Descriptions","Beschreibungen" },
 { "Deselect all","Deselektiere Alle" },
 { "Details","Details" },
 { "Dinner","Abendessen" },
 { "Do you really want\nto close KO/Pi?","Möchten Sie wirklich\nKO/PI verlassen?" },
 { "Due Date","Fällig am" },
 { "Due: ","Fällig: "},
 { "Due Time","Fällig um"  },
 { "Due:","Fällig:"},
 { "Duration: ","Dauer: " },
 { "Edit...","Bearbeite..." },
 { "Edit","Bearbeite" },
 { "Edit Event...","Bearbeite Termin..." },
 { "Edit Event","Bearbeite Termin" },
 { "Edit exceptions","Bearbeite Ausnahmen" },
 { "EditorBox:","Editor Fenster:" },
 { "Edit Recurrence Range","Bearbeite Wiederholung"  },
 { "Edit Todo...","Berabeite Todo..." },
 { "Edit To-Do","Todo bearbeiten" },
 { "E&mail address:","E&mail Adresse:" },
 { "(EmptyEmail)","(KeineEmail)" },
 { "(EmptyName)","(KeinName)" },
 { "Enable Recurrence","Wiederholender Termin" },
 { "End after","Endet nach"},
 { "End by:","Endet am"},
 { "End Date","End Datum" },
 { "End:","Ende:" },
 { "End Time","End Zeit" },
 { "English","Englisch" },
 { "Event","Termin" },
 { "Event list","Termin Liste" },
 { "Events","Termine" },
 { "Event Viewer:","Termin Übersicht:" },
 { "every","jede" },
 { "Exceptions...","Ausnahmen..." },
 { "Exceptions","Ausnahmen" },
 { "Exclude holidays","Ohne freie Tage" },
 { "Exclude Saturdays","Ohne Samstage" },
 { "Feb","Feb" },
 { "February","Februar" },
 { "&Find","Suche!" },
 { "Fonts","Schriftart" },
 { "Force take local entry always","Erzwinge:Nimm immer lokalen Eintrag" },
 { "Force take remote entry always","Erzwinge:Nimm immer fernen Eintrag"},
 { "Free","Frei" },
 { "Friday","Freitag" },
 { "Fri","Fr" },
 { "From:","Vom:" },
 { "Full &name:","Vor- und &Nachname:" },
 { "General","Allgemein" },
 { "German","Deutsch" },
 { "Gifts","Geschenke" },
 { "Go to Today","Heute anzeigen" },
 { "Help","Hilfe" },
 { "Hide Dates","Daten ausblenden" },
 { "Highlight color:","Markierungen:" },
 { "Holiday color:","Freie Tage:" },
 { "hour(s)","Stunde(n)" },
 { "In %1 days: ","In %1 Tagen: " },
 { "Incomplete Todo:","Unerledigte Aufgaben:" },
 { "Information","Information" },
 { "Invalid search expression,\ncannot perform ","Kann Suche nicht ausführen" },
 { "Jan","Jan" },
 { "January","Januar" },
 { "JournalView:","Journal Ansicht:" },
 { "Journals","Journale" },
 { "Jul","Jul" },
 { "July","Juli" },
 { "Jump to date","Springe zum Datum" },
 { "June","Juni" },
 { "Jun","Jun" },
 { "Key Bindings...","Tastenzuordnung..." },
 { "Kids","Kinder" },
 { "Known Problems...","Bekannte Probleme..." },
 { "KO/Pi Find ","KO/Pi Suchdialog " },
 { "KO/Pi Find: ","KO/Pi Suchen: " },
 { "KO/Pi is starting ... ","  KO/Pi startet ... \n... Zeit für eine Kaffeepause ..." },
 { "Language:(needs restart)","Sprache (Neustart!)" },
 { "Language:","Sprache" },
 { "Large","Etwas mehr" },
 { "List View:","Listenansicht:" },
 { "List View","Listenansicht" },
 { "Load/Save","Laden/Speichern" },
 { "Load Template","Lade Vorlage" },
 { "Locale","Localisation" },
 { "Local temp file:","Lokale temp. Datei:" },
 { "Location: ","Ort: " },
 { "Location:","Ort:" },
 { "Mail client","Mail Programm" },
 { "Mail Client","Mail Programm" },
 { "March","März" },
 { "Mar","Mär" },
 { "May","Mai" },
 { "M. Bains line:","M. Bains Linie:" },
 { "Medium","Medium" },
 { "Method","Methode" },
 { "minute(s)","Minute(n)" },
 { "Monday","Montag" },
 { "Mon","Mo" },
 { "Monthly","Monatlich" },
 { "Month not long enough","Monat ist nicht lang genug" },
 { "month(s)","Monat(e)" },
 { "Month view:","Monatsansicht:" },
 { "Month view uses category colors","Monatsansicht zeigt Kategorie Farben" },
 { "Todo view uses category colors","To-Do Ansicht zeigt Kategorie Farben" },
 { "Move &Down","Nach unten verschieben" },
 { "Move &Up","Nach oben verschieben" },
 { "Name:","Name:" },
 { "Name","Name" },
 { "\nAre you sure you want\nto delete this event?","\nSind Sie sicher, dass Sie\nden Termin löschen möchten?" },
 { "%n Days","%n Tage" },
 { "Never","Nie" },
 { "New event...","Neuer Termin..." },
 { "New event","Neuer Termin" },
 { "New Event...","Neuer Termin..." },
 { "New Events/Todos should","Neue Termine/Todos sollten" },
 { "&New","&Neu" },
 { "New","Neu", },
 { "New Sub-Todo...","Neues Sub-Todo..." },
 { "New Todo...","Neues Todo..." },
 { "Next Alarm: ","Nächster Alarm: ", },
 { "&Next Day","&Nächster Tag", },
 { "Next days view uses full window","Nächste-X-Tage nutzt Vollbild" },
 { "Next month","Nächster Monat" },
 { "&Next Week","&Nächste Woche" },
 { "Next year","Nächstes Jahr" },
 { "Next Year","Nächstes Jahr" },
 { "%n h","%n Std" },
 { "No ending date","Kein End-Datum", },
 { "No event, nothing to do.","Kein Termin, nichts zu tun.", },
 { "No event selected.","Kein Termin selektiert" },
 { "No","Nein" },
 { "No program set","Kein Programm ausgewählt", },
 { "Normal","Normal" },
 { "[No selection]","Keine Selektion", },
 { "No sound set","Kein Sound ausgewählt", },
 { "no time ","keine Zeit ", },
 { "no time","keine Zeit", },
 { "No Time","Keine Zeit" },
 { "November","November" },
 { "Nov","Nov", },
 { "\nThis event recurs\nover multiple dates.\n","\nDieser Termin wiederholt sich an mehreren Tagen.\n" },
 { "occurrence(s)","Vorkommen" },
 { "October","Oktober" },
 { "Oct","Okt", },
 { "O-due!","Ü-fällig! " },
 { "&OK","&OK" },
 { "Ok+Show!","Ok+Anzeigen" },
 { "Organizer: %1","Organisator %1" },
 { "Organizer","Organisator" },
 { "Owner: ","Besitzer: " },
 { "Owner:","Besitzer:" },
 { "<p><b>Priority:</b> %2</p>","<p><b>Priorität:</b> %2</p>" },
 { "Pick a date to display","Wähle einen Tag zum anzeigen aus" },
 { "Please specify a valid due date.","Bitte gültiges Fälligkeitsdatum angeben."},
 { "Please specify a valid end date,\nfor example '%1'.","Bitte gültiges Enddatum angeben,\nz.B.'%1'." },
 { "Please specify a valid start date.","Bitte gültiges Startdatum angeben." },
 { "Please specify a valid start date,\nfor example '%1'.","Bitte gültiges Startdatum angeben,\nz.B. '%1'." },
 { "Please specify a valid start time.","Bitte gültige Startzeit angeben."},
 { "Please specify a valid start time,\nfor example '%1'.","Bitte gültige Startzeit angeben,\nz.B. '%1'." },
 { "Preferences - some settings need a restart (nr)","Einstellungen - teilweise Neustart erforderlich (bn)" },
 { "&Previous Day","Vorheriger Tag" },
 { "Previous month","Vorheriger Monat" },
 { "Previous Month","Vorheriger Monat" },
 { "&Previous Week","Vorherige Woche" },
 { "Previous year","Vorheriges Jahr" },
 { "Previous Year","Vorheriges Jahr" },
 { "Printing","Drucken" },
 { "Priority:","Priorität:" },
 { "Private","Privat" },
 { "Proceed","Weiter" },
 { "Public","Öffentlich" },
 { "Purge","Entferne" },
 { "Purge Completed","Entferne erledigte ToDos" },
 { "Purge To-Dos","Todos bereinigen" },
 { "read-only","schreibgeschützt" },
 { "Recur every","Wiederh. alle" },
 { "Recur in the month of","Wiederh. im Monat" },
 { "Recur on the","Wiederh. am" },
 { "Recur on this day","Wiederh. am diesen Tag" },
 { "Recurrence Range...","Wiederholungs Zeitraum..." },
 { "Recurrence Range","Wiederholungs Zeitraum" },
 { "Recurrence Rule","Wiederholungs Regel" },
 { "Recurrence","Wiederholung" },
 { "Recurs","Wiederholung" },
 {"&Reject","Abweisen"},
 { "Reminder:","Alarm:" },
 { "Rem.:","Alarm:" },
 { "Rem.","Alarm:" },
 { "Remote file:","Remote Datei:"},
 { "Remote IP:","Remote (ferne) IP:" },
 { "Remote syncing (via ssh/scp) network settings ","Remote Sync (via ssh/scp) Netzwerk Einstellungen " },
 { "Remote user:","Remote Benutzer"},
 { "&Remove","Entfe&rnen" },
 { "Remove","Entfernen" },
 { "Request response","Bemerkung anfordern" },
 { "Role:","Rolle:" },
 { "Role","Rolle" },
 { "Sat","Sa" },
 { "Saturday","Samstag" },
 { "Search for:","Suche nach:" },
 { "Search In","Suche in" },
 { "Search...","Suche..." },
 { "Search","Suche" },
 { "Select Addresses","Wähle Adressen" },
 { "Select all","Selektiere Alle" },
 { "Select a month","Wähle Monat" },
 { "Select a week","Wähle Woche" },
 { "Select a year","Wähle Jahr" },
 { "Send directly","Sende direkt" },
 { "&Send Messages","&Sende Nachrichten", },
 { "Sep","Sep" },
 { "September","September" },
 { "Shopping","Einkaufen" },
 { "Use short date in (WN/E) view","Kurzdatum in (WN/Termin) Ansicht" },
 { "Show Dates","Zeige Daten" },
 { "Show events that recur daily in date nav.","Zeige tägl.wiederh.Term.in Datums Nav." },
 { "Show Event...","Zeige Termin..." },
 { "Show ev. that recur weekly in date nav.","Zeige wöch.wiederh.Term.in Datums Nav." },
 { "Show Marcus Bains line","Zeige Marcus Bains Linie" },
 { "Show summary after syncing","Zeige Zusammenfassung nach Sync." },
 { "Show time as:","Zeige Zeit als" },
 { "Show Todo...","Zeige To-Do" },
 { "Show topmost todo prios in What's N.:","Anz. höchster Prios in What's N.:"},
 { "Show topmost todo prios in What's Next:","Anz. höchster Prios in What's Next:"},
 { "Show vertical screen (Needs restart)","Vertikaler Bildschirm-Layout (Neustart!)" },
 { "&Show","Zeige" },
 { "Show...","Zeige..." },
 { "Show","Zeige" },
 { "Small","Klein" },
 { "Sorry","Entschuldigung" },
 {"Sorry, the copy command failed!\nCommand was:\n","Der Kopierbefehl schlug fehl!\nBefehl war:\n"},
 { "Start:","Start:" },
 { "Start Date","Start Datum" },
 { "Start date: %1","Start Datum: %1" },
 { "Start Time","Start Zeit" },
 { "Status:","Status:" },
 { "Status","Status:" },
 { "Summaries","Titel" },
 { "Summary:","Titel:" },
 { "Summary","Titel" },
 { "Sunday","Sonntag" },
 { "Sun","So" },
 { "Sync preferences:","Sync Einstellungen" },
 { "Sync Prefs","Sync Einstellungen" },
 { "Syncronize","Daten abgleich" },
 { "Take local entry on conflict","Nimm lokalen Eintrag beim Konflikt" },
 { "Take newest entry on conflict","Nimm neuesten Eintrag beim Konflikt" },
 { "Take remote entry on conflict","Nimm fernen Eintrag beim Konflikt" },
 { "Template '%1' does not contain a valid Todo.","Template '%1' enthält kein gültiges To-Do" },
 { "Template does not contain a valid Event.","Template '%1' enthält keinen gültigen Termin" },
 { "Template...","Vorlage..." },
 { "This day","Dieser Tag" },
 { "This is an experimental feature. ","Dieses Feature ist experimentel" },
 { "This item will be\npermanently deleted.","Dieser Eintrag wird\nkomplett gelöscht." },
 { "This item will be permanently deleted.",  "Dieser Eintrag wird komplett gelöscht." },
 { "Thu","Do" },
 { "Thursday","Donnerstag" },
 { "Time associated","Mit Zeit" },
 { "Time bar:","Uhrzeit Zeile:" },
 { "Time && Date","Zeit und Datum" },
 { "Time Format","Zeit Format" },
 { "Time Format(nr):","Zeit Format(Neustart!)" },
 { "Date Labels:","Datumsleiste:" },
 { "Time: ","Zeit: " },
 { "Timezone:","Zeitzone:" },
 { "To: ","Bis: " },
 { "To:","Bis:" },
 { "Today: ","Heute: " },
 { "Todo due today color:","Heute fällige To-Do's" },
 { "To-do items:","To-Do items:" },
 { "Todo overdue color:","Überfällige To-Do's" },
 { "Todo","Todo" },
 { "To-do view shows completed Todos","To-do Ansicht zeigt erledigte To-dos" },
 { "ToDoView:","Todo Ansicht:" },
 { "Toggle Alarm","Wechsle Alarm" },
 { "Toggle Allday","Umschalten Ganztag" },
 { "Tomorrow: ","Morgen: " },
 { "Tue","Di" },
 { "Tuesday","Dienstag" },
 { "Two entries are in conflict, if: ","Zwei Einträge haben einen Konflikt, wenn:" },
 { "Unable to find template '%1'.","Kann Vorlage '%1' nicht finden." },
 { "Unknown","Unbekannt" },
 { "Up","Hinauf" },
 { "Use password (if not, ask when syncing)","Passwort: (sonst jedesmal anfragen)" },
 { "User defined","Benutzerdefiniert" },
 { "User long date:","Format langes Datum:" },
 { "User short date:","Forma kurzes Datum:" },
 { "View","Ansicht" },
 { "View Fonts","Schriftarten Ansichten" },
 { "Views","Ansichten" },
 { "Wed","Mi" },
 { "Wednesday","Mittwoch" },
 { "Week %1","Woche %1" },
 { "Weekly","Wöchentlich" },
 { "Week starts on Sunday","Woche beginnt Sonntags" },
 { "What's Next View:","What's Next Anz." },
 { "What's next ?","Was kommt als nächstes?(What's Next)" },
 { "Working Hours","Tägliche Arbeitszeit" },
 { "Working hours color:","Arbeitszeit in der Agenda Ansicht:" },
 { "Write back existing entries only","Nur exisitierende Einträge zurückschreiben" },
 { "Write back synced file","Syncronisierte Datei zurückschreiben" },
 { "Yearly","Jährlich" },
 { "year(s)","Jahr(e)" },
 { "Yes","Ja" },
 { "You have %d item(s) selected.\n","Sie haben %d Einträge ausgewählt.\n" },
 { "You have to restart KOrganizer for this setting to take effect.","Sie müssem Korganizer neu starten, damit diese Einstellung aktiviert wird." },
 { "week(s) on:","Woche(n) am: " },
 { "Full menu bar(nr)","Volle Menuleiste(bn)" },
 { "Timezone has daylight saving","Zeitzone hat Sommerzeit" },
 { "Actual start and end is the\nsunday before this date.","Tatsächlicher Beginn/Ende ist der\nSonntag vor diesem Datum!" },
 { "The year in the date is ignored.","Das Jahr vom Datum wird ignoriert." },
 { "Daylight start:","Sommerzeit Beginn:" },
 { "Daylight end:","Sommerzeit Ende:" },
 { "Time Zone","Zeitzone" },
 { "Monday 19 April 2004: %A %d %B %Y","Montag 19 April 2004: %A %d %B %Y" },
 { "%A: Monday --- %a: Mon","%A: Montag --- %a: Mon" },
 { "minutely","minütlich" },
 { "hourly","stündlich" },
 { "daily","täglich" },
 { "weekly","wöchentlich" },
 { "monthly","monatlich" },
 { "day-monthly","tag-monatlich" },
 { "month-yearly","monat-jährlich" },
 { "day-yearly","tag-jährlich" },
 { "position-yearly","pos-jährlich" },
 { "Edit item on doubleclick (if not, show)","Editiere mit Doppelklick(wenn nicht, zeige)" },
 { "Highlight current day in agenda","Hebe >>heute<< in Agenda hervor" },
 { "Use light color for highlight current day","Helle Farbe für >>heute<< Hervorhebung" },
 { "Highlight selection in Time Edit","Hebe Auswahl in Zeit Edit hervor" },
 { "Hold fullscreen on view change","Behalte Vollbild bei Ansichswechsel" },
 { "Hold non-fullscreen on view change","Behalte Nicht-Vollbild bei Ansichtsw." },
 { "Event list view uses full window","Listenansicht nutzt Vollbild" },
 { "Set agenda to DayBeginsAt on change","Setze Agenda auf TagBeginntUm bei Wechsel" },
 { "Set agenda to current time on change","Setze Agenda auf gegenw.Zeit bei Wechsel" },
 { "Listview uses monthly timespan","Listenansicht zeigt monatliche Zeitspanne" },
 { "ViewChange","Ansichtswechsel" },
 { "Default alarm *.wav file:","Standard Alarm *.wav Datei:" },
 { "This setting is useless for 5500 user!","Diese Einst. ist nutzlos für 5500 Nutzer" },
 { "File","Datei" },
 { "Clone...","Dupliziere.." },
 { "Move...","Bewege..." },
 { "Beam...","Sende via IR..." },
 { "&Clone...","Dupliziere.." },
 { "&Move...","Bewege..." },
 { "&Beam...","Sende via IR..." },
 { "Show Completed","Zeige erledigte Todos" },
 { "Show Quick Todo","Zeige Quick Todo" },
 { "Unparent Todo","Un-sub Todo" },
 { "Save selected to file...","Speichere Selektierte..." },
 { "Add Categ. to selected...","Füge zu Selekt. Kateg. hinzu..." },
 { "Set Categ. for selected...","Setze Kateg. für Selekt." },
 { "Beam selected via IR","Sende Selekt. via IR..." },
 { "Search","Suchen" },
 { "Date Picker","Datum auswählen" },
 { "Day View","Tagesansicht" },
 { "Work Week","Arbeitswoche" },
 { "Week","Wochenansicht" },
 { "Month","Monatsansicht" },
 { "Todo View","Todo Liste" },
 { "Journal","Journal Ansicht" },
 { "Next days","Nächste Tage" },
 { "Print agenda selection...","Drucke Agendaselektion..." },
 { "Toggle DateNavigator","Navigator umschalten" },
 { "Toggle FilterView","Filteransicht umschalten" },
 { "Prev. month","Vorheriger Monat" },
 { "Go backward","Gehe zurück" },
 { "Go forward","Gehe weiter" },
 { "Synchronize","Synchronisieren" },
 { "AgendaSize","Agendagröße" },
 { "Import (*.ics/*.vcs) file","Importiere (*.ics/*.vcs) Datei" },
 { "Import last file","Importiere letzte Datei" },
 { "Import Opie/Qtopia Cal.","Importiere Opie/Qtopia Kal." },
 { "Load Calendar Backup","Lade Kalender Backup" },
 { "Save Calendar Backup","Speichere Kalender Backup" },
 { "Export VCalendar","Exportiere VCalendar" },
 { "Manage new categories...","Verwalte neue Kategorien..." },
 { "Beam complete calendar...","Sende kompletten Kalender via IR" },
 { "Beam filtered calendar...","Sende gefilterten Kalender via IR" },
 { "Remote via ssh","Über Netzwerk via ssh" },
 { "With local file","Mit lokaler Datei" },
 { "With last file","Mit letzter Datei" },
 { "KO/Pi: Ready for beaming","KO/Pi: Bereit zum Senden" },
 { "KO/Pi:Beaming done","KO/Pi: Senden erfolgt" },
 { "Save filename","Speichern: Dateinamen wählen" },
 { "File already exists!\nOld file from:\n%1\nOverwrite?\n","Dateiname existiert bereits!\nAlte Datei vom:\n%1\nÜberschreiben?\n" },
 { "KO/Pi: Warning!","KO/Pi: Warnung!" },
 { "Overwrite!","Überschreibe!" },
 { "KO/Pi:Saved %1","KO/Pi:Gespeichert %1" },
 { "All selected items will be\npermanently deleted.\n(Deleting items will take\nsome time on a PDA)\n","Alle selektierten Einträge werden\nunwiederbringlich gelöscht.\n(Löschen kann auf dem\nPDA einige Zeit dauern)\n" },
 { "KO/Pi Confirmation","KO/Pi Bestätigung" },
 { "Close dialog to abort deletion!","Schließe Dialog um das Löschen abzubrechen!" },
 { "Deleting item %d ...","Lösche Eintrag %d ..." },
 { "%d items remaining in list.","%d Einträge sind in der Liste verblieben." },
 { "Size","Größe" },
 { "Date","Datum" },
 { "Mime Type","Datei Typ" },
 { "All Files","Alle Dateien" },
 { "Files","Dateien" },
 { "Documents","DoKumente" },
 { "Select Categories","Selektiere Kategorien" },
 { " &Deselect All "," Auswahl aufheben " },
 { "A&dd","Hinzu" },
 { "&Modify","Ändern" },
 { "Edit Categories","Editiere Kategorien" },
 { " &Edit Categories "," &Editiere Kategorien " },
 { "Beam Options","Beam Einstellungen" },
 { " With timezone "," Mit Zeitzone " },
 { " Local time ",  " Lokale Zeit " },
 { "Manage new Categories","Verwalte neue Kategorien" },
 { "Add to category list","Füge zur Kategorieliste hinzu" },
 { "Remove from Events/Todos","Entferne von Terminen/Todos" },
 { "After importing/loading/syncing\nthere may be new categories in\nevents or todos\nwhich are not in the category list.\nPlease choose what to do:\n ","Nach dem Importieren/Laden/Syncen\nkann es neue Kategorien in den \nTerminen oder Todos geben, die nicht\nin der Kategorieliste enthalten sind.\nBitte wählen Sie, was passieren soll:\n " },
 { "New categories not in list:","Kategorien, die nicht in der Liste sind:" },
 { "File format","Datei Format" },
 { "Time format","Zeit Format" },
 { "Delete all\ncompleted To-Dos?","Lösche alle\nerledigten To-Dos?" },
 { "KO/Pi:Saving Data to File ...","KO/Pi: Speichere Kalender in Datei ..." },
 { "KO/Pi:File Saved. Needed %d sec, %d ms","KO/Pi: Abgespeichert in %d sec, %d ms" },
 { "h","Std" },
 { "min","Min" },
 { "hou","Std" },
 { "day","Tag" },
 { "French","Französich" },
 { "Time","Zeit" },
 { "Event Viewer","Termin Ansicht" },
 { "Cancel Sync","Sync Abbrechen" },
 { "Remote","Fern" },
 { "Local","Lokal" },
 { "Conflict! Please choose entry","Konflikt! Bitte Eintrag wählen" },
 { "Local: ","Lokal: " },
 { "Remote: ","Fern: " },
 { "Last modified: ","Zuletzt geändert: " },
 { "Location: ","Ort: " },
 { "<p><b>From:</b> %1 </p><p><b>To:</b> %2</p>","<p><b>Von:</b> %1 </p><p><b>Bis:</b> %2</p>" },
 { "<p><b>On:</b> %1</p>","<p><b>Am:</b> %1</p>" },
 { "<p><b>From:</b> %1</p> ","<p><b>Von:</b> %1</p> " },
 { "<p><b>To:</b> %1</p>","<p><b>Bis:</b> %1</p>" },
 { "<p><b>On:</b> %1</p> ","<p><b>Am:</b> %1</p> " },
 { "<p><b>From:</b> %1 <b>To:</b> %2</p>","<p><b>Von:</b> %1 <b>Bis:</b> %2</p>" },
 { "This is a %1 recurring event.","Das ist ein %1 wiederholender Termin." },
 { "<b>Next recurrence is on:</b>","<b>Nächste Wiederholung ist am:</b>" },
 { "<b>Last recurrence was on:</b>","<b>Letzte Wiederholung war am:</b>" },
 { "( %1 min before )","( %1 min vorher )" },
 { "<b>Alarm on: ","<b>Alarm am: " },
 { "<b>Details: </b>","<b>Details: </b>" },
 { "<p><b>Priority:</b> %2</p>","<p><b>Priorität:</b> %2</p>" },
 { "<p><i>%1 % completed</i></p>","<p><i>%1 % erledigt</i></p>" },
 { "Organizer","Organisator" },
 { "Save","Speichern" },
 { "Exit (+save)","Beenden (+ speichern)" },
 { "Home","Zuhause" },
 { "Office","Büro" },
 { "Libary","Bücherei" },
 { "Doctor","Arzt" },
 { "Beach","Strand" },
 { "Conference room","Konferenzraum" },
 { "Drive Home","Heimfahrt" },
 { "Watch TV","Tv gucken" },
 { "Phone call","Telefonanruf" },
 { "Pay bill","Rechnung bezahlen" },
 { "Read book","Buch lesen" },
 { "Watering plants","Pflanzen giessen" },
 {"Appointment","Verabredung" },
 {"Birthday","Geburtstag" },
 {"Business","Geschäft" },
 {"Business Travel","Geschäftsreise" },
 {"Cinema","Kino" },
 {"Customer","Kunde" },
 {"Break","Pause" },
 {"Breakfast","Frühstück" },
 {"Competition","Wettkampf" },
 {"Dinner","Abendessen" },
 {"Education","Erziehung" },
 {"Family","Familie" },
 {"Favorites","Favoriten" },
 {"Festival","Festival" },
 {"Fishing","Angeln" },
 {"Flight","Flug" },
 {"Gifts","Geschenk" },
 {"Holiday","Feiertag" },
 {"Holiday Cards","Ansichtskarten" },
 {"Hot Contacts","Heisse Kontakte" },
 {"Hiking","Wandern" },
 {"Hunting","Jagen" },
 {"Key Customer","Wichtiger Kunde" },
 {"Kids","Kinder" },
 {"Lunch","Mittagessen" },
 {"Meeting","Treffen" },
 {"Miscellaneous","Verschiedenes" },
 {"Partner","Partner" },
 {"Party","Partie" },
 {"Personal","Privat" },
 {"Personal Travel","Privatreise"},
 {"PHB","PHB" },
 {"Phone Calls","Telefonanruf" },
 {"Projects","Projekt" },
 {"Recurring","Wiederholend" },
 {"School","Schule" },
 {"Shopping","Einkaufen" },
 {"Speach","Rede" },
 {"Special Occasion","Spez.Gelegenheit" },
 {"Sports","Sport" },
 {"Talk","Vortrag" },
 {"Travel","Reise" },
 {"TV","TV" },
 {"Germany","Deutschland" },
 {"Sweden","Schweden" },
 {"Forest","Wald" },
 { "Desert","Wüste" },
 { "Kitchen","Küche" },
 { "Lake","See" },
 {"University","Universität"},
 {"Vacation","Urlaub" },
 {"VIP","VIP" },
 { "Import Sharp Calendar","Importiere Sharp Kalender" },
 { "This todo has been cancelled!","Dieses Todo wurde gecancelt!" },
 { "This event has been cancelled!","Dieser Termin wurde gecancelt!" },
 { "Cancelled","Gecancelt" },
 { "Multiple sync","Mehrfach Sync" },
 { "Local file","Lokale Datei" },
 { "Last file","Letzte Datei" },
 { "Keys + Colors...","Tasten + Farben..." },
 { "Mini icons in toolbar(nr)","Mini Icons in ToolBar(bn)" },
 { "Quick load/save (w/o Unicode)","Schnelles Laden/Speichern (o Unicode)" },
 { "Choose...","Wähle..." },
 { "Use colors for application:","Setze Farben für Programm:" },
 { "Buttons, menus, etc.:","Knöpfe, Menu, etc.:" },
 { "Frames, labels, etc.:","Rahmen, Label, etc.:" },
 { "Show parent To-Do's in What's Next view","Zeige Ober-Todo in What's Next Anz." },
 { "Show location in What's Next view","Zeige Ort in What's Next Anz." },
 { "Show events that recur ","Zeige Termine, die sich wiederholen:" },
 { "Show in every cell ","Zeige in jeder Zelle " },
 { "short month","kurzen Monat" },
 { "icons","Icons" },
 { "Show Sat/Sun together","Zeige Sam/Son zusammen" },
 { "Categorie colors are applied to text","Kategorie Farben färben Text" },
 { "Month view uses day colors","Monatsansicht zeigt Tagesfarben" },
 { "Day color odd months","Tagesfarbe ungerade Monate" },
 { "Day color even months","Tagesfarbe gerade Monate" },
 { "Color for Sundays + category \"Holiday\"","Farbe für Sonntag + Kateg.\" Feiertag\"" },
 { "To-do view shows complete as 'xx %'","Zeige Prozent erledigt als 'xx %'" },
 { "Small To-do view uses smaller font","Kleine To-do Ansicht nutzt kleineren Font" },
 { "Colors are applied to text","Farben werden auf Text angewendet" },
 { "Use internal alarm notification","Nutze interne Alarm Benachrichtigung" },
 { "Note: KO/Pi must be running to notify you about an alarm. Recommended for use on Zaurus: Disable this option and install KO/Pi alarm applet.\n","Achtung: KO/Pi muß ausgeführt werden damit die Benachrichtigung funktioniert. Empfehlung für Zaurus: Diese Option nicht wählen und KO/Pi Alarm Applet installieren.\n" },
 { "Play beeps count:","Anzahl der Alarmpiepse: " },
 { "Beeps interval in sec:","Zeitintervall der Alarmpiepse: " },
 { "Default suspend time in min:","Standard Supendierungs Zeit: " },
 { "Auto suspend count:","Anzahl der auto Suspendierungen" },
 { "Alarm *.wav file for newly created alarm:","Alarm *.wav Datei für neu angelegte Alarme:" },
 { "New profile","Neues Profil" },
 { "Clone profile","Klone Profil" },
 { "Delete profile","Lösche Profil" },
 { "Profile:","Profil:" },
 { "Include in multiple sync","Beziehe Profil in mehrfach Sync mit ein" },
 { "Force: Take local entry always","Erzwinge: Nimm immer lokalen Eintrag" },
 { "Force: Take remote entry always","Erzwinge: Nimm immer fernen Eintrag" },
 { "Show summary after sync","Zeige Zusammenfassung nach dem Synchronisieren" },
 { "Write back file","Schreibe Datei zurück" },
 { "Remote file (w down/upload command)","Entfernte Datei (via down/upload Kommando)" },
 { "Pre sync (download) command:","Bevor Sync (download) Kommando:" },
 { "Local device name:","Name dieses Gerätes:" },
 { "Ask for preferences before sync","Frage nach Synchronisationseinstellungen vor dem Syncen" },
 { "Sync preferences","Synchronisations Einstellungen" },
 { "Profile kind","Profil Art" },
 { "Local file","Lokale Datei" },
 { "Local file:","Lokale Datei:" },
 { "Post sync (upload) command:","Nach Sync (upload) Kommando:" },
 { "Fill in default values for:","Setze Beispiel Werte ein für:" },
 { "Hint: Use $PWD$ for placeholder of password!","Hinweis: Benutze $PWD$ als Platzhalter für ein Passwort!" },
 { "Synchronization Preferences","Einstellungen der Synchronisationsprofile"},
 { "Device","Gerät:" },
 { "Sync with file \n...%1\nfrom:\n%2\n","Sync mit Datei \n...%1\nvom:\n%2\n" },
 { "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n","Synchronisationsübersicht:\n\n %d items lokal hinzugefügt\n %d items entfernt hinzugefügt\n %d items lokal geändert\n %d items entfernt geändert\n %d items lokal gelöscht\n %d items entfernt gelöscht\n" },
 { "Synchronization successful","Synchronisation erfolgreich" },
 { "Sync cancelled or failed. Nothing synced.","Sync abgebrochen oder fehlgeschlagen. Nichts wurde gesynced." },
 { "Sync file \n...%1\ndoes not exist!\nNothing synced!\n","Sync Datei \n...%1\nexistiert nicht!\nNichts wurde gesynced!\n" },
 { "Sync filename(*.ics/*.vcs)","Sync Dateiname(*.ics/*.vcs)" },
 { "Enter password","Passwort eingeben" },
 { "Do you really want\nto remote sync\nwith profile \n","Wollen Sie wirklich\nmit dem entfernten\nProfil syncen: \n" },
 { "Copy remote file to local machine...","Kopiere entfernte Datei auf lokalen Rechner..." },
 { "Sorry, the copy command failed!\nCommand was:\n%1\n \nTry command on console to get more\ndetailed info about the reason.\n","Sorry, das Kopierkommando schlug fehl!\nKommando war:\n%1\n \nVersuche Kommando von Kosole um\nDetails für das Fehlschlagen\nzu erfahren.\n" },
 { "Writing back file result: ","Resultat des Dateizurückschreibens: " },
 { "Syncronization sucessfully completed","Synchronisation erfolgreich abgeschlossen" },
 { "Edit Calendar Filters","Editiere Kalendar Filter" },
 { "Enter filter name:","Neuer Filter Name:" },
 { "Add Filter","Filter hinzufügen" },
 { "Question","Frage" },
 { "Filter position: ","Filter Position: " },
 { "Month View","Monatsansicht" },
 { "This profil cannot be deleted!\n","Dieses Profil kann\nnicht gelöscht werden!" },
 { "KO/Pi config error","KO/Pi Konfig. Fehler" },
 { "Local device name undefined!\nPlease define device name!","Name dieses Gerätes undefiniert!\nBitte Namen angeben!" },
 { "Multiple profiles with same name!\nPlease use unique profile names!","Mehrere Profile haben denselben Namen!\nBitte unterschiedliche Namen wählen!" },
 { "Access: ","Zugriff: " },
 { "Needs Action","Aktion notwendig" },
 { "Accepted","Akzeptiert" },
 { "Declined","Abgelehnt" },
 { "Tentative","Vorläufig" },
 { "Delegated","Beauftragt" },
 { "Completed","Vollständig" },
 { "In Process","In Bearbeitung" },
 { "Participant","Teilnehmer" },
 { "Optional Participant","Möglicher Teilnehmer" },
 { "Observer","Beobachter" },
 { "Chair","Vorsitzender" },
 { "Not supported \non desktop!\n","" },
 { "Nothing selected!\n\nThis prints the full width of the Agenda view as you see it!\n\nTo determine the vertical range of the printing, please select\na vertical range (with the left mouse button down) in one column. ","Es ist nichts selektiert!\nDieses druckt die volle Breite der Agenda View, so wie man sie sieht.\nUm die verticale Auswahl zum Drucken zu bestimmen,\nbitte einen verticalen Zeitraum (mit gedrückter linker Maustaste)\nin einer Spalte auswählen. " },
 { "Date range: ","Datums Zeitspanne: " },
 { "Not supported \non  PDA!\n","Nicht verfügbar\nauf dem PDA. " },
 { "Syncing - close to abort!","Syncing-schließe um abzubrechen." },
 { "Add / remove events","Add./entferne Termine" },
 { "File does not exist:\n '%1'.","Datei existiert nicht:\n '%1'." },
 { "Couldn't load calendar\n '%1'.","Kann Kalender nicht laden:\n '%1'." },
 { "\nThe file on disk has changed!\nFile size: %1 bytes.\nLast modified: %2\nDo you want to:\n\n - Save and overwrite file?\n - Sync with file, then save?\n - Cancel without saving? \n","\nDie gepeicherte Datei wurde verändert!\nDatei Grösse: %1 Bytes.\nZuletzt geändert: %2\nMöchten Sie:\n\n - Speichern und die Datei überschreiben?\n - Mit Datei Synchronisieren, dann speichern?\n - Abbrechen ohne zu speichern? \n" },
 { "Overwrite","Überschreiben" },
 { "Sync+save","Syncen+speichern" },
 { "Default","Standard" },
 { " Categories added to list! "," Kategorien zur Liste hinzugefügt! " },
 { "  %d items?","  %d Einträge?" },
 { "\nThis event recurs\nover multiple dates.\nAre you sure you want\nto delete this event\nand all its recurrences?","\nDieses ist ein\nwiederholender Termin!.\nSind Sie sicher, dass Sie\ndiesen Termin und alle\nWiederholungen löschen möchten?" },
 { " ?\n\nDelete:\n"," ?\n\nLösche:\n" },
 { "Current","Aktuelle" },
 { "\nThis event recurs\nover multiple dates.\nDo you want to delete\nall it's recurrences,\nor only the current one on:\n","\nDieses ist ein\nwiederholender Termin!\nMöchten sie alle Wiederholungen\nlöschen, oder nur die aktuelle am:\n" }, 
 { "All","Alle" },
 { "Data Loss Warning","Datenverlust Warnung" },
 { "Proceed","Weitermachen" },
 { "The journal entries can not be\nexported to a vCalendar file.","Die Journal Einträge können\nnicht in eine vCalendar\nDatei exportiert werden!" },
 { "Filter disabled ","Filter abgeschaltet" },
 { "Filter selected: ","Gewählter Filter: " },
 { "Toggle Cancel","Gecancelt ändern" },
 { "&Toggle Cancel","Gecancel&t ändern" },
 { "Configure Toolbar","Konfiguriere Toolbar" },
 { "Stretched TB","Gedehnte TB" },
 { "Import file \n...%1\ndoes not exist!\nNothing imported!\n","Import Datei \n...%1\nexistiert nicht!\nNichts importiert!\n" },
 { "Import filename(*.ics/*.vcs)","Import Dateiname(*.ics/*.vcs)" },
 { "When importing a calendar twice\nduplicated events will be ignored!\nYou can create a backup file with\nFile - Save Calendar Backup\nto revert importing","Wenn ein Kalender doppelt importiert\nwird, werden doppelte Einträge ignoriert!\nSie können eine Backup Datei anlegen unter\nDatei - Speichere Kalender Backup\num den Import rückgängig machen zu können.\n" },
 { "Not supported \non desktop!\n","Nur verfügbar auf PDA!" },
 { "Imported file successfully","Datei erfolgreich importiert" },
 { "Error importing file","Fehler beim Importieren der Datei" },
 { "Export vcal filename(*.vcs)","Export vcal Dateiname(*.vcs)" },
 { "Save file\nalready exists!\nOld save file from:\n%1\nOverwrite?\n","Zu speichernde Datei\existiert bereits!\nExist. Datei vom:\n%1\nÜberschreiben?\n" },
 { "Overwrite!","Überschreiben!" },
 { "Import file \n...%1\nfrom:\n%2\nDuplicated entries\nwill not be imported!\n","Import Datei \n...%1\nvom:\n%2\nDuplizierte Einträge\nwerden nicht importiert!\n" },
 { "Load backup filename","Lade Backup Dateiname" },
 { "Backup file\ndoes not exist!\nNothing loaded!","Backup Datei\nexistiert nicht!\nNichts geladen!" },
 { "KO/Pi:Loaded %1","KO/Pi:Geladen %1" },
 { "Save backup filename","Speichere Backup Dateiname" },
 { "Backup file\nalready exists!\nOld backup file from:\n%1\nOverwrite?\n","Backup Datei\nexistiert bereits!\nAlte Backup Datei vom:\n%1\nÜberschreiben?\n" },
 { "KO/Pi:Saved %1","KO/Pi:Gespeichert %1" },
 { "Details of attendee","Teilnehmerdetails" },
 { "Work phone:\n","Telefon Arbeit:\n" },
 { "Work mobile phone:\n","Mobiltelefon Arbeit:\n" },
 { "Home phone:\n","Telefon privat:\n" },
 { "Mobile home phone:\n","Mobiltelefon privat:\n" },
 { "Email:\n","Email:\n" },
 { "Alarm disabled for this item","Alarm deaktiviert für dieses Item" },
 { "Audio Al.: ","Audio Al.: " },
 { "Proc.Al.: ","Proz.Al.: " },
 { "No sound set","Kein Sound definiert" },
 { "*.wav|Wav Files","*.wav|Wav Dateien" },
 { "No program set","Kein Programm definiert" },
 { "Running '%1'","Ausführen '%1'" },
 { "Playing '%1'","Abspielen '%1'" },
 { "Show Sync Events in WN/Agenda view","Zeige Sync Events in WN/Agenda Ansicht" },
 { "User defined (usertranslation.txt)","Benutzerdefiniert (usertranslation.txt)" },
 { "Load!","Laden!" },
 { "Backup file from:\n%1\nLoading  backup\nfile will delete\nyour current Data!\n","Backup Datei vom:\n%1\nDas Laden der Backup Datei\nlöscht die aktuellen Daten!\n" },
 { "KO/Pi Features and hints","KO/Pi Eigenschaften und Tipps" },
 { "KO/Pi User translation HowTo","KO/Pi Benutzer-Übersetzung HowTo" },
 { "KO/Pi Synchronization HowTo","KO/Pi Synchronisation HowTo" },
 { "Features + hints...","Eigenschaften + Tipps..." },
 { "User translation...","Benutzer Übersetzung..." },
 { "Sync HowTo...","Synchronisation HowTo..." },
 { "Print calendar...","Drucke Kalender..." },
 { "Anniversary","Jahrestag" },
 { "When importing birthdays twice\nduplicated events will be ignored,\nif the event has not been\nchanged in KO/Pi!\n","Wenn Geburtstage mehrfach importiert\nwerden, werden doppelte Einträge ignoriert\nwenn sie nicht verändert wurden.\n" },
 { "Import Birthdays (KA/Pi)","Importiere Geburtstage (KA/Pi)" },
 { "Next recurrence is on: ","Nächste Wiederholung ist am:" },
 { "<b>Alarm on:  </b>","<b>Alarm am:  </b>" },
 { "<b>Access: </b>","<b>Zugriff: </b>" },
 { "(%1 min before)","(%1 min vorher)" },
 { "<b>Categories: </b>","<b>Kategorien: </b>" },
 { "Save Journal/Description...","Speichere Journal/Details..." },
 { "This saves the text/details of selected\nJournals and Events/Todos\nto a text file.","Das speichert den Text bzw.\ndie Details von selektierten\nJournalen und Events/Todos\nin eine Textdatei." },
 { "Continue","Weitermachen" },
 { " birthdays/anniversaries added!"," Geburts-/Jahrestage hinzugefügt" },
 { "Attendee:","Teilnehmer:" },
 { "Click OK to search ->","Klicke zum Suchen auf OK ->" },
 { "On day ","Am Tag " },
 { "%1 of ","%1 des Monats" },
 { "%1 of the year","%1 des Jahres" },
 { "Anonymous","Anonymo" },
 { "nobody@nowhere","niemand@nirgendwo" },
 { "calendar.html","calendar.html" },
 { " Local Time"," Locale Zeit" },
 { "Unknown Name","Unbekannter Name" },
 { "unknown@nowhere","unbekannt@nirgendwo" },
 { "Beam via IR!","Beam via IR!" },
 { "Next Month","Nächster Monat" },
 { "Prio","Prio" },
 { "Reparent Todo","Mache Sub-Todo" },
 { "tomorrow","morgen" },
 { "today","heute" },
 { "yesterday","gestern" },
 { "Ok","Ok" },
 { "Ok+Agenda","Ok+Agenda" },
 { "Email","Email" },
 { "RSVP","RSVP" },
 { "Email:","Email:" },
 { "Appointment Time ","Termin Zeit " },
 { "2","2" },
 { "3","3" },
 { "4","4" },
 { "  0 %","  0 %" },
 { " 20 %"," 20 %" },
 { " 40 %"," 40 %" },
 { " 60 %"," 60 %" },
 { " 80 %"," 80 %" },
 { "100 %","100 %" },
 { "Filter","Filter" },
 { "Configure","Konfiguriere" },
 { "What's Next","What's Next" },
 { "Complete calendar...","Kompletten Kalender..." },
 { "Filtered calendar...","Gefilterten Kalender..." },
 { "Export to phone","Exportiere zum Handy" },
 { "Beam receive enabled","Beam Empfang an" },
 { "What's new?","Was ist neu?" },
 { "FAQ...","FAQ..." },
 { "Licence...","Licence..." },
 { "What's This?","What's This?" },
 { "&Edit...","&Editiere..." },
 { "Oktober","Oktober" },
 { "Title","Titel" },
 { "%1 %","%1 %" },
 { "Enable Pi-Sync","Schalte Pi-Sync an" },
 { "Import!","Importiere!" },
 { "inserting birthdays - close to abort!","Burzeltage werden eingefügt - schließe um abzubrechen!" },
 { "Export to phone options","Export ans Handy Optionen" },
 { "Please read Help-Sync Howto\nto know what settings to use.","Bitte lese Hilfe-Sync Howto\num zu erfahren welche Einstellungen\ndie richtigen sind." },
 { "I/O device: ","I/O device: " },
 { "Connection: ","Connection: " },
 { "Model(opt.): ","Model(opt.): " },
 { "Write back events in future only","Schreibe nur zukünftige Termine zurück" },
 { "Max. weeks in future: ","Max. Wochen in der Zukunft: " },
 { "NOTE: This will remove all old\ntodo/calendar data on phone!","ACHTUNG: Das löscht alle alten\nToDo/Kalender Daten auf dem Handy!" },
 { "Export to mobile phone!","Exportiere auf das Handy!" },
 { "Export complete calendar","Exportiere kompletten Kalender" },
 { "Writing to phone...","Sende Daten ans Handy..." },
 { " This may take 1-3 minutes!"," Das kann 1-3 Minuten dauern!" },
 { "Retry","Nochmal versuchen" },
 { "KDE/Pim phone access","KDE/Pim Handy Zugriff" },
 { "Error accessing device!\nPlease turn on connection\nand retry!","Fehler beim Zugriff auf das Gerät!\nBitte die Verbindung aktivieren\nund nochmal versuchen!" },
 { "Error exporting to phone!","Fehler beim Export auf das Handy!" },
 { "Export filtered calendar","Exportiere gefilterten Kalender" },
 { "Preferences","Vorlieben" },
 { "Global","Global" },
 { "Phone","Phone" },
 { "SMS","SMS" },
 { "Fax","Fax" },
 { "Pager","Pager" },
 { "SIP","SIP" },
 { "Italian","Italienisch" },
 { "24:00","24:00" },
 { "12:00am","12:00am" },
 { "24.03.2004 (%d.%m.%Y|%A %d %B %Y)","24.03.2004 (%d.%m.%Y|%A %d %B %Y)" },
 { "03.24.2004 (%m.%d.%Y|%A %B %d %Y)","03.24.2004 (%m.%d.%Y|%A %B %d %Y)" },
 { "2004-03-24 (%Y-%m-%d|%A %Y %B %d)","2004-03-24 (%Y-%m-%d|%A %Y %B %d)" },
 { "Mon 19.04.04: %a %d.%m.%y","Mon 19.04.04: %a %d.%m.%y" },
 { "Mon, 19.Apr.04: %a, %d.%b.%y","Mon, 19.Apr.04: %a, %d.%b.%y" },
 { "Add 30 min to selected Timezone","Addiere 30 min zur Zeitzone" },
 { "Used Mail Client","Benutzter Mail Client" },
 { "Channel:","Channel:" },
 { "Message:","Message:" },
 { "Parameters:","Parameter:" },
 { "HINT: Delimiter=; Name=%1,Email=%2","Hinweis: Begrenzer=; Name=%1,Email=%2" },
 { "extra Message:","extra Message:" },
 { "extra Parameters:","extra Parameter:" },
 { "HINT: Emails=%1,Attachments=%2","Hinweis: Emails=%1,Attachments=%2" },
 { "External Apps.","Externe Appl." },
 { "24 hours","24 Std." },
 { "3 hours","3 Std." },
 { "1 hour","1 Std." },
 { "15 minutes","15 Min." },
 { "5 minutes","5 Min." },
 { "1 minute","1 Min." },
 { "23","23" },
 { "Mon 15","Mon 15" },
 { "Configure KO","Konfiguriere KO" },
 { "Event text","Termin Text" },
 { "ToDo","ToDo" },
 { "Today","Heute" },
 { "What's Next View","What's Next Ansicht" },
 { "Show Sync Events in \nWhat's Next/Agenda view","Zeige Sync Termine in \nWhat's Next/Agenda view" },
 { "Use short date in \nWhat's Next/Event view","Zeige Kurzdatum in \nWhat's Next/Event view" },
 { "Allday Agenda view shows todos","Ganztag Agenda zeigt Todos" },
 { "Alarm","Alarm" },
 { "Used %1 Client","Benutzter %1 Client" },
 { "No email client installed","Kein Email Klient installiert" },
 { "Userdefined email client","Benutzerdef. Email Klient" },
 { "OM/Pi email client","OM/Pi Email Klient" },
 { "Include in multiple ","Beziehe in multiple " },
 { "calendar  ","Kalender  " },
 { "addressbook  ","Adressbuch  " },
 { "pwmanager","PWmanager" },
 { " sync"," Sync ein" },
 { "Write back synced data","Schreibe gesyncte Daten zurück" },
 { "-- Write back (on remote) existing entries only","-- Schreibe nur existierende (entfernte) Einträge zurück" },
 { "-- Write back (calendar) entries in future only","-- Schreibe nur zukünftige Kalender-Einträge zurück" },
 { "---- Max. weeks in future: ","---- Max. wochen in der Zukunft: " },
 { "Pi-Sync ( direct Kx/Pi to Kx/Pi sync )","Pi-Sync ( direktes Kx/Pi zu Kx/Pi sync )" },
 { "Mobile device (cell phone)","Mobiles Gerät (Handy)" },
 { "Help...","Hilfe..." },
 { "Local file Cal:","Lokale Datei Kal:" },
 { "Local file ABook:","Lokale Datei ABuch:" },
 { "Local file PWMgr:","Lokale Datei PWMgr:" },
 { "Addressbook file (*.vcf) is used by KA/Pi","Adressbuch Datei (*.vcf) wird von KA/Pi genutzt" },
 { "Calendar:","Kalender:" },
 { "AddressBook:","AdressBuch:" },
 { "PWManager:","PWManager:" },
 { "Addressbook file is used by KA/Pi","Adressbuch Datei wird von KA/Pi genutzt" },
 { "ssh/scp","ssh/scp" },
 { "ftp","ftp" },
 { "Password for remote access: (could be the same for each)","Passwort für entfernten Zugriff: (kann dasselbe sein für alle)" },
 { "Remote IP address: (could be the same for each)","Entfernte IP Adresse: (kann dasselbe sein für alle)" },
 { "Remote port number: (should be different for each)","Entfernte Port Nummer: (Sollte für alle unterschiedlich sein)" },
 { "command for downloading remote file to local device","Kommando zum Download der entfernten Datei zum lokalen Gerät" },
 { "command for uploading local temp file to remote device","Kommando zum Upload der lokalen temp. Datei zum entfernten Gerät" },
 { "Insert device where\nphone is connected. E.g.:\n","Füge Device ein, an dem\ndas Handy angeschlossen ist. Z.B.:\n" },
 { "KDE-Pim sync config","KDE-Pim sync Konfig" },
 { "Insert kind of connection,e.g.:\n","Füge Art der Verbindung ein,z.B.:\n" },
 { "Recommended: Leave empty!\n(Such that model can\nbe auto detected)\nOr insert name of model:\n","Empfohlen: Leer lassen!\n(So dass das Model\nautomatisch erkannt\nwerden kann)\nOder füge Model Name ein:\n" },
 { "Port number (Default: %1)","Port Nummer (Default: %1)" },
 { "Password to enable\naccess from remote:","Passwort um entfernten\nZugriff zuzulassen:" },
 { "Automatically start\nat application startup","Starte automatisch\nbeim Programmstart" },
 { "Automatically sync\nwith KDE-Desktop","Automatischer Sync\nmit dem KDE-Desktop" },
 { "Enter port for Pi-Sync","Port Nummer für Pi-Sync" },
 { "Disable Pi-Sync","Schalte Pi-Sync aus" },
 { "Do you really want\nto multiple sync\nwith all checked profiles?\nSyncing takes some\ntime - all profiles\nare synced twice!","Wollen Sie wirklich\nmit allen selektierten\nProfilen \"Multi-Syncen\"?\nDas Syncen dauert einige Zeit -\nalle Profile werden zweimal gesynct!" },
 { "KDE-Pim Sync","KDE-Pim Sync" },
 { "Multiple profiles","Multi-Sync Profile" },
 { "Device: ","Gerät: " },
 { "Multiple sync started.","Multi-Sync gestartet." },
 { "Nothing synced! No profiles defined for multisync!","Nichts gesynct! Keine Profile\nselektiert für Multi-Sync" },
 { "Turn filter on","Schalte Filter an" },
 { "Turn filter off","Schalte Filter aus" },
 { "Key bindings  KOrganizer/Pi","Tastatur Belegung KOrganizer/Pi" },
 { "<p><b>White</b>: Item readonly</p>\n","<p><b>Weiss</b>: Eintrag schreibgeschützt</p>\n" },
 { "<p><b>Dark yellow</b>:  Event/todo with attendees.</p>\n","<p><b>Dunkelgelb</b>:  Termin/Todo mit Teilnehmern.</p>\n" },
 { "<p><b>Black</b>: Event/todo with attendees. You are the organizer!</p>\n","<p><b>Schwarz</b>: Termin/Todo mit Teilnehmern. Sie sind der Organisator!</p>\n" },
 { "<p><b>Dark green</b>: Information(description) available.([i] in WN view)</p>\n","<p><b>Dunkelgrün</b>: Information(Beschreibung) verfügbar.([i] in WN Ansicht)</p>\n" },
 { "<p><b>Blue</b>: Recurrent event.([r] in Whats'Next view)</p>\n","<p><b>Blau</b>: Wiederholender Termin.([r] in Whats'Next Ansicht)</p>\n" },
 { "<p><b>Red</b>: Alarm set.([a] in Whats'Next view)</p>\n","<p><b>Rot</b>: Alarm gesetzt.([a] in Whats'Next Ansicht)</p>\n" },
 { "<p><b>Cross</b>: Item cancelled.([c] in Whats'Next view)</p>\n","<p><b>Kreuz</b>:  Eintrag gecancelt.([c] in Whats'Next Ansicht)</p>\n" },
 { "<p><b>(for square icons in agenda and month view)</b></p>\n","<p><b>(für quadratische Icons in Agenda und Monats Ansicht)</b></p>\n" },
 { "<p><h2>KO/Pi icon colors:</h2></p>\n","<p><h2>KO/Pi Icon Farben:</h2></p>\n" },
 { "<p><b>E</b>:  Edit item</p>\n","<p><b>E</b>:  Editiere Eintrag</p>\n" },
 { "<p><b>A</b>: Show agenda view.</p>\n","<p><b>A</b>: Zeige Agenda Ansicht.</p>\n" },
 { "<p><b>I,C</b>: Close dialog.</p>\n","<p><b>I,C</b>: Schließe Dialog.</p>\n" },
 { "<p><h3>In event/todo viewer:</h3></p>\n","<p><h3>In Termin/Todo Detail-Anzeige:</h3></p>\n" },
 { "<p><b>shift+up/down</b>: Goto first/last item</p>\n","<p><b>shift+up/down</b>: Gehe zum ersten/letzten Eintrag</p>\n" },
 { "<p><b>ctrl+up/down</b>:  Goto up/down by 20% of items</p>\n","<p><b>ctrl+up/down</b>:  Gehe hoch/runter 20% aller Einträge</p>\n" },
 { "<p><b>up/down</b>: Next/prev item</p>\n","<p><b>up/down</b>: Nächster/vorheriger Eintrag</p>\n" },
 { "<p><b>return+shift</b>: Deselect item+one step down</p>\n","<p><b>return+shift</b>: Deselektiere Item+Cursor einen Eintrag runter</p>\n" },
 { "<p><b>return</b>: Select item+one step down</p>\n","<p><b>return</b>: Selektiere Item+Cursor einen Eintrag runter</p>\n" },
 { "<p><b>I</b>: Show info of current item+one step down.</p>\n","<p><b>I</b>: Zeige Detail-Ansicht vom sel.Eintrag+Cursor einen Eintrag runter.</p>\n" },
 { "<p><h3>In list view:</h3></p>\n","<p><h3>In Listen Ansicht:</h3></p>\n" },
 { "<p><b>return+shift</b>:  Mark item as not completed+one step down</p>\n","<p><b>return+shift</b>:  Markiere Todo als nicht erledigt+Cursor einen Eintrag runter</p>\n" },
 { "<p><b>return</b>: Mark item as completed+one step down.</p>\n","<p><b>return</b>: Markiere Todo als erledigt+Cursor einen Eintrag runter.</p>\n" },
 { "<p><b>Q</b>: Toggle quick todo line edit.</p>\n","<p><b>Q</b>: Zeige/verstecke Quick Todo Eingabe Zeile.</p>\n" },
 { "<p><b>shift+P</b>: Make new <b>P</b>arent for todo selected with shift+S</p>\n","<p><b>shift+P</b>: Mache Todo zum neuen <b>P</b>arent Todo für das Todo, welches mit shift+Sselektiert wurde.</p>\n" },
 { "<p><b>shift+S</b>: Make <b>S</b>ubtodo (reparent todo)</p>\n","<p><b>shift+S</b>: Mache Todo zum <b>S</b>ubtodo</p>\n" },
 { "<p><b>shift+U</b>: <b>U</b>nparent todo (make root todo)</p>\n","<p><b>shift+U</b>: <b>U</b>nparent Todo (Mache Sub-Todo zum Toplevel Todo)</p>\n" },
 { "<p><h3>In todo view:</h3></p>\n","<p><h3>In Todo Anzige:</h3></p>\n" },
 { "<p><b>ctrl+up/down</b>: Scroll small todo view</p>\n","<p><b>ctrl+up/down</b>: Scrolle kleine Todo Ansicht</p>\n" },
 { "<p><b>up/down</b>: Scroll agenda view</p>\n","<p><b>up/down</b>: Scrolle Agenda Ansicht</p>\n" },
 { "<p><h3>In agenda view:</h3></p>\n","<p><h3>In Agenda Ansicht:</h3></p>\n" },
 { "<p><b>del,backspace</b>: Delete selected item</p>\n","<p><b>del,backspace</b>: Lösche selektiertes Item</p>\n" },
 { "<p><b>left</b>: Prev. week | <b>left+ctrl</b>: Prev. month</p>\n","<p><b>left</b>: Vorh. Woche | <b>left+ctrl</b>: Vorh. Monat</p>\n" },
 { "<p><b>right</b>: Next week | <b>right+ctrl</b>: Next month</p>\n","<p><b>right</b>: Nächste Woche | <b>right+ctrl</b>: Nächste Woche</p>\n" },
 { "<p><b>B</b>: Edit description (details) of selected item</p>\n","<p><b>B</b>: Editiere Beschreibung (Details) des selektierten Items</p>\n" },
 { "<p><b>C</b>: Show current time in agenda view</p>\n","<p><b>C</b>: Zeige aktuelle Zeit in Agenda Ansicht</p>\n" },
 { "<p><b>+,-</b> : Zoom in/out agenda | <b>A</b>: Toggle allday agenda height</p>\n","<p><b>+,-</b> : Zoom rein/raus Agenda | <b>A</b>: Wechsle Ganztag Agenda Höhe</p>\n" },
 { "<p><b>S+ctrl</b>: Add sub-todo | <b>X</b>: Toggle datenavigator</p>\n","<p><b>S+ctrl</b>: Füge Sub-Todo hinzu | <b>X</b>: Zeige/verstecke Datenavigator</p>\n" },
 { "<p><b>T</b>: Goto today | <b>T+ctrl</b>: New Todo</p>\n","<p><b>T</b>: Gehe zu Heute | <b>T+ctrl</b>: Neues Todo</p>\n" },
 { "<p><b>E</b>: Edit selected item |<b> E+ctrl</b>: New Event</p>\n","<p><b>E</b>: Editiere selektiertes Item |<b> E+ctrl</b>: Neuer Termin</p>\n" },
 { "<p><b>D</b>: One day view | <b>M</b>: Month view</p>\n","<p><b>D</b>: Ein-Tages Ansicht | <b>M</b>: Monats Ansicht</p>\n" },
 { "<p><b>Z,Y</b>: Work week view | <b>U</b>: Week view</p>\n","<p><b>Z,Y</b>: Arbeitswochen Ansicht | <b>U</b>: Wochen Ansicht</p>\n" },
 { "<p><b>V</b>: Todo view | <b>L</b>: Event list view</p>\n","<p><b>V</b>: Todo Ansicht | <b>L</b>: Termin Listen Ansicht</p>\n" },
 { "<p><b>N</b>: Next days view| <b>W</b>: What's next view\n ","<p><b>N</b>: Nächste-Tage Ansicht days view| <b>W</b>: What's next Ansicht\n " },
 { "<p><b>1-0</b> (+<b>ctrl</b>): Select filter 1-10 (11-20)</p>\n","<p><b>1-0</b> (+<b>ctrl</b>): Selektiere Filter 1-10 (11-20)</p>\n" },
 { "<p><b>O</b>: Filter On/Off | <b>J</b>: Journal view</p>\n","<p><b>O</b>: Filter An/Aus | <b>J</b>: Journal Ansicht</p>\n" },
 { "<p><b>F</b>: Toggle filterview |<b>F+ctrl</b>: Edit filter </p>\n","<p><b>F</b>: Zeige/verstecke Filter Ansicht |<b>F+ctrl</b>: Editiere Filter </p>\n" },
 { "<p><b>Space</b>: Toggle fullscreen | <b>P</b>: Date picker</p>\n","<p><b>Space</b>: Zeige fullscreen | <b>P</b>: Datums Picker</p>\n" },
 { "<p><b>I</b>: Show info for selected event/todo</p>\n","<p><b>I</b>: Zeige Info (Details) für selektiertes Item</p>\n" },
 { "<p><b>H</b>: This help dialog | <b>S</b>: Search dialog</p>\n","<p><b>H</b>: Dieser Hilfe Dialog | <b>S</b>: Such Dialog</p>\n" },
 { "<p><h2>KO/Pi key shortcuts:</h2></p>\n","<p><h2>KO/Pi Tastatur Kurzbefehle:</h2></p>\n" },
 { "After changing something, the data is\nautomatically saved to the file\n~/kdepim/apps/korganizer/mycalendar.ics\nafter (configurable) three minutes.\nFor safety reasons there is  one autosaving\nafter 10 minutes (of idle time) again. The \ndata is saved automatically when closing KO/Pi\nYou can create a backup file \nwith: File - Save Calendar Backup\n","Nachdem etwas geändert wurde, werden die\nDaten automatisch in die Datei abgespeichert\n~/kdepim/apps/korganizer/mycalendar.ics\nnach (konfigurierbar) drei Minuten.\nAus Sicherheitsgründen wird noch einmal\nnach 10 Min. abgespeichert, wenn keine\nÄnderungen vorgenommen wurden. Die \nDaten werden automatisch gespeichert,\nwenn KO/Pi beendet wird.\nSie können eine Backup-Datei erstellen im\nMenu: Datei - Speichere Kalender Backup\n" },
 { "Auto Saving in  KOrganizer/Pi","Auto Speichern in  KOrganizer/Pi" },
 { "\nhttp://sourceforge.net/projects/kdepimpi\n","\nhttp://sourceforge.net/projects/kdepimpi\n" },
 { "\nor report them in the bugtracker on\n","\noder trage sie in dem Bugtracker ein auf\n" },
 { "\nPlease report unexpected behaviour to\nlutz@pi-sync.net\n","\nBitte melde fehlerhaftes Verhalten an\nlutz@pi-sync.net\n" },
 { "2) Audio alarm daemon\nfor Zaurus is available!\nas an additional small application\n","2) Ein Audio Alarm Daemon\nfür den Zaurus ist verfügbar\nals zusätzliche Anwendung\n" },
 { "1) Importing *.vcs or *.ics files from\nother applications may not work properly,\nif there are events with properties\nKO/Pi does not support.\n","1) Importieren von *.vcs oder *.ics Dateien von\nanderen Anwendungen kann möglicherweise\n nicht richtig funktionieren,\nwenn die Termine Eigenschaften haben,\ndie KO/Pi nicht unterstützt.\n" },
 { "Known Problems in  KOrganizer/Pi","Bekannte Probleme in  KOrganizer/Pi" },
 { "KO/Pi FAQ","KO/Pi FAQ" },
 { "PDA-Edition\nfor: Zaurus 5x00/7x0/860/3000/6000\n","PDA-Edition\nfür: Zaurus 5x00/7x0/860/3000/6000\n" },
 { "KOrganizer/Platform-independent\n","KOrganizer/Platform-independent\n" },
 { "About KOrganizer/Pi","Über KOrganizer/Pi" },
 { "From: ","Von: " },
 { "Remove sync info","Entferne Sync Info" },
 { "For all profiles","Für alle Profile" },
 { "Hide not Running","Verstecke nicht Laufende" },
 { "ME","ME" },
 { "Toolbar","Toolbar" },
 { "Undo Delete...","Löschen rückgängig machen..." },
 { "Undo Delete","Löschen rückgängig machen" },
 { "KDE Sync HowTo...","KDE Sync HowTo..." },
 { "Multi Sync HowTo...","Multi Sync HowTo..." },
 { "Januar","Januar" },
 { "KO/Pi Keys + Colors","KO/Pi Tasten + Farben" },
 { "No Filter","Kein Filter" },
 { "Multiple Sync options","Multi Sync Optionen" },
 { "Sync algo options","Sync Ablauf Optionen" },
 { "Apply filter when adding data to local:","Filter für das Hinzufügen von Daten zu Lokal:" },
 { "Incoming calendar filter:","Eingehender Kalender Filter:" },
 { "Incoming addressbook filter:","Eingehender Adressbuch Filter:" },
 { "Write back options","Optionen zum Zurückschreiben" },
 { "Write back (on remote) existing entries only","Schreibe nur existierende (auf Entfernt) Einträge zurück" },
 { "Apply filter when adding data to remote:","Filter für das Hinzufügen von Daten zu Entfernt:" },
 { "Outgoing calendar filter:","Ausgehender Kalender Filter:" },
 { "Outgoing addressbook filter:","Ausgehender Adressbuch Filter:" },
 { "Write back (calendar) entries for time period only","Schreibe nur Kalender Einträge für Zeitspanne zurück" },
 { "Time period","Zeitspanne" },
 { "From ","Von " },
 { " weeks in the past to "," Wochen in der Vergangenheit bis zu " },
 { " weeks in the future "," Wochen in der Zukunft " },
 { "Profile kind specific settings","Profil Art abhängige Einstellungen" },
 { "Local temp file:","Lokale temp Datei:" },
 { "Multiple profiles with same name!\nPlease use unique profile names!","Mehrere Profile mit demselben Namen!\nBitte verschiedene Namen benutzen!" },
 { "Aborted! Nothing synced!","Abgebrochen! Nichts wurde gesynct!" },
 { "Language","Sprache" },
 { "Time Format","Zeit Format" },
 { "Time Zone","Zeit Zone" },
 { "%1 groups subscribed","%1 Guppen abboniert" },
 { "Your current storage dir is:\n%1\nYour mail is stored in:\n(storagedir)/apps/kopiemail/localmail","Aktuelles Speicherverzeichnis ist:\n%1\nIhre Mail wird gespeichert in:\n(speicherverz.)/apps/kopiemail/localmail" },
 { "<b>New data storage dir:</b>","<b>Neues Datenspeicherverzeichnis:</b>" },
 { "New dirs are created automatically","Neue Verzeichnisse werden aut. erstellt" },
 { "Save settings","Speichere Einstellungen" },
 { "Save standard","Speichere Standard" },
 { "<b>New settings are used\nafter a restart</b>","<b>Neue Einstellungen werden nach\neinem Neustart genutzt</b>" },
 { "Settings are stored in\n%1","Einstellungen werden gespeichert in:\n%1" },
 { "Data storage path","Daten Speicherpfad" },
 { "Language","Sprache" },
 { "Show time in agenda items","Zeige Zeit in Agenda Items" },
 { "Color for Sundays + category "Holiday"","Farbe für Sonntags + Kategorie "Feiertag"" },
 { "Show events, that are done in \nWhat's Next view","Zeige abgelaufene Termine in\nWhat's Next Ansicht" },
 { "Hide not running Todos in To-do view","Verstecke nicht laufende Todos" },
 { "+01:00 Europe/Oslo(CET)","+01:00 Europe/Oslo(CET)" },
 { "KO/Pi","KO/Pi" },
 { "There is nothing to undo!","Es gibt nichts zum\nRückgängigmachen!" },
 { "Recreating edit dialog. Please wait...","Recreating edit dialog. Please wait..." },
 { "Sound.Al.: ","Sound.Al.: " },
 { "From: %1   To: %2   %3","Von: %1   Bis: %2   %3" },
 { "Restore","Wiederherstellen" },
 { "\nAre you sure you want\nto restore this?","\nMöchten Sie das wirklicht\nwiederherstellen?" },
 { "% completed","% komplett" },
 { "%d item(s) found.","%d Item(s) gefunden." },
 { "Set complete","Setze auf erledigt" },
 { "(cancelled)","(gecancelt)" },
 { "Click on the week number to\nshow week in agenda view","Klicke auf die Wochennummer\num die Woche in der Agenda anzuzeigen" },
 { " Local time "," Locale Zeit " },
 { "Form2","Form2" },
 { "Filter enabled","Filter angeschaltet" },
 { "Edit Filters","Ändere Filter" },
 { "Print What's Next View...","Drucke What's Next Ansicht..." },
 { "Agenda","Agenda" },
 { " ("," (" },
 { "<p><b>Due on:</b> %1</p>","<p><b>Fällig am:</b> %1</p>" },
 { "Print","Print" },
 { "&Setup Printer...","Drucker &Setup..." },
 { "View Type","Zeige Typ" },
 { "Page &orientation:","Seiten Ausrichtung:" },
 { "Use Default of Selected Style","Default des selektierten Stils" },
 { "Use Default Setting of Printer","Default Einstellung des Druckers" },
 { "Portrait","Portrait" },
 { "Landscape","Landschaft" },
 { "Print day","Drucke Tag" },
 { "CalPrintDay_Base","CalPrintDay_Base" },
 { "Date && Time Range","Datum && Zeitspanne" },
 { "&End date:","&Enddatum:" },
 { "&Start date:","&Startdatum:" },
 { "Start &time:","Startzeit:" },
 { "End ti&me:","Endzeit:" },
 { "E&xtend time range to include all events","Erweitere Zeitspanne um alle Termine einzuschliessen" },
 { "Include to&dos that are due on the printed day(s)","Inclusive To&dos, die an den selektierten Tagen fällig sind" },
 { "Alt+D","Alt+D" },
 { "&Use colors","Nutze Farben" },
 { "Alt+U","Alt+U" },
 { "Print week","Drucke Woche" },
 { "CalPrintWeek_Base","CalPrintWeek_Base" },
 { "Use &colors","Nutze Farben" },
 { "Type of View","Typ der Ansicht" },
 { "Print as &Filofax page","Drucke als &Filofax Seite" },
 { "Alt+F","Alt+F" },
 { "Print as &timetable view:","Drucke als Zeittabelle:" },
 { "Alt+T","Alt+T" },
 { "Print as split week view","Drucke als gesplittete Wochenansicht" },
 { "Print month","Drucke Monat" },
 { "CalPrintMonth_Base","CalPrintMonth_Base" },
 { "&Start month:","&Startmonat:" },
 { "&End month:","&Endmonat:" },
 { "Print week &numbers","Drucke Wochen Nummer(n)" },
 { "Print todos","Drucke Todos" },
 { "CalPrintTodoConfig_Base","CalPrintTodoConfig_Base" },
 { "Include &description of the item","Inclusive Itembeschreibung" },
 { "Include d&ue date of the item","Inclusive Fälligkeitsdatum des Items" },
 { "Include &priority of the item","Inclusive Priorität des Items" },
 { "Items to Print","Zu druckende Items" },
 { "&From:","Von:" },
 { "&To:","Bis:" },
 { "Print &all todo items","Drucke alle Todo Items" },
 { "Print only &uncompleted items","Drucke nur nicht erledigte Todos" },
 { "Only items due in the &range:","Nur Items in dem Zeitraum:" },
 { "Todo List","Todo Liste" },
 { "&Title:","&Titel:" },
 { "Co&nnect subtodos with its parent","Verbinde Unter-Todos mit ihren Ober-Todos" },
 { "Todo list","Todo Liste" },
 { "&Print...","Drucke..." },
 { "<qt>Printing on printer <b>%1</b></qt>","<qt>Drucke auf Drucker <b>%1</b></qt>" },
 { "[Unconfigured]","[Unkonfiguriert]" },
 { "OK","OK" },
 { "FilterEditor","FilterEditor" },
 { "Include","Inclusive" },
 { "Exclude","Exclusive" },
 { "Edit Selection...","Editiere Auswahl" },
 { "recurring events","wiederholende Termine" },
 { "recurr. events","wiederh.Termine" },
 { "completed to-dos","erledigte Todos" },
 { "events","Termine" },
 { "todos","Todos" },
 { "journals","Journale" },
 { "public","öffentl." },
 { "private","privat" },
 { "confidential","vertraul." },
 { "\nhas sub-todos.\nAll completed sub-todos\nwill be deleted as well!","\nhat Unter-Todos.\nAlle erledigten Unter-Todos\nwerden auch gelöscht!" },
 { "Yesterday","Gestern" },
 { "Day after tomorrow","Übermorgen" },
 { "Tomorrow","Morgen" },
 { "Day before yesterday","Vorgestern" },
 { "Size %1","Größe %1" },
 { "New Agendasize: %1","Neue Agendagröße: %1" },
 { " (%1 y.)"," (%1 J.)" },
 { "Allday:","Ganztägig:" },
 { "compl.todos","erled.Todos" },
 { "Day view","Tagesansicht" },
 { "Next days","Nächste Tage" },
 { "Next week","Nächste Woche" },
 { "Next two weeks","Nächste zwei Wochen" },
 { "Next month","Nächster Monat" },
 { "Journal view","Journal" },
 { "Display all opened","Zeige alle geöffnet" },
 { "Display all closed","Zeige alle geschlossen" },
 { "Display all flat","Zeige alle flach" },
 { "<p><i>Completed on %1</i></p>","<p><i>Erledigt am %1</i></p>" },
 { "Default todo done color:","Standard Todo erledigt Farbe" },
 { "Select week %1-%2","Wähle Woche %1-%2" },
 { "Select Week","Wähle Woche" },
 { "Set alarm for selected...","Setze Alarm für Selekt..." },
 { "Set Alarm!","Setze Alarm!" },
 { "Canged alarm for %1 items","Alarm für %1 Items geändert" },
 { " and "," und " },
 { "<IMG src="%1"> only )","nur <IMG src="%1"> )" },
 { "Mail to selected","Mail an Ausgewählte" },
 { "Mail to all","Mail an Alle" },
 { "Week view mode uses bigger font","Wochenansicht Modus nutzt größeren Font" },
 { "Set reminder ON with offset to:","Alarm AN mit Offset auf:" },
 { " on"," am" },
 { " completed on "," erledigt am " },
 { "Save as Event template","Speichere als Vorlage" },
 { "Load Event template","Lade Termin Vorlage" },
 { "Save as Journal template","Speichere als Journal Vorlage" },
 { "Insert Journal template","Füge Journal Vorlage ein" },
 { "Sub todos:<br>","Unter Todos:<br>" },
 { "Parent todo:<br>","Über Todo:<br>" },
 { "Set current as color category","Setze Gewählte als Farbkategorie" },
 { " completed"," erledigt" },
 { "(c)2004 Lutz Rogowski (rogowski@kde.org)\nKO/Pi is based on KOrganizer\n(c)2002,2003 Cornelius Schumacher\n(schumacher@kde.org) and the KDE team.\nKOrganizer/Pi is licensed under the GPL.\nKO/Pi can be compiled for\nLinux, Zaurus-PDA and Windows\nwww.pi-sync.net --- www.korganizer.org\nSpecial thanks to Michael and Ben\nfor intensive testing!","(c)2004 Lutz Rogowski (rogowski@kde.org)\nKO/Pi basiert auf KOrganizer\n(c)2002,2003 Cornelius Schumacher\n(schumacher@kde.org) und das KDE Team.\nKOrganizer/Pi ist lizensiert unter der GPL.\nKO/Pi kann kompiliert werden für\nLinux, Zaurus-PDA und Windows\nwww.pi-sync.net --- www.korganizer.org\nBesonderen Dank an Michael und Ben\nfür intensives Testen!" },
 { "Syncing aborted. Nothing synced.","Syncing abgebrochen.Nichts wurde gesynct." },
 { "Connected! Sending request for remote file ...","Verbunden! Sende Daten Anfrage..." },
 { "Trying to connect to remote...","Versuche mit Gegenstelle zu verbinden..." },
 { "Connection to remote\nhost timed out!\nDid you forgot to enable\nsyncing on remote host?","Verbindungsversuch wegen\nZeitüberschreitung gescheitert!\nWurde vergessen Pi-Sync auf\nder Gegenstelle anzuschalten?" },
 { "ERROR: Receiving remote file failed.","FEHLER: Empfang der entfernten Daten fehlgeschlagen." },
 { "Error","Fehler" },
 { ""You entered an invalid date!\n Date changed  to current date.","Ungültiges Datum eingegeben.\nSetze heutiges Datum." },
 { "You entered an invalid date!\n Will use current date instead.","Ungültiges Datum eingegeben.\nSetze stattdessen heutiges Datum." },
 { "Warning","Warnung" },
 { "Select week number","Wähle Wochen Nummer" },
 { "Februar","Februar" },
 { "Click on the week number to\nshow week zoomed","Klicke auf die Wochennummer\num die Woche groß zu zeigen" },
 { "W","W" },
 { "Click on this to\nselect week number","Klicke hierauf um\ndie Woche auszuwählen" },
 { "T: %1","T: %1" },
 { "Start: ","Start: " },
 { "Pi-Sync options for device: ","Pi-Sync Einstellungen für Gerät: " },
 { "Password for remote access:","Passwort für fernen Zugriff:" },
 { "Remote IP address:","Ferne IP Adresse:" },
 { "Remote port number:","Ferne Port Nummer:" },
 { "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },
 { "Remote from: ","Fern von: " },
 { "Local from: ","Lokal von: " },
 { "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },
 { "Local calendar changed!\n","Lokaler Kalender geändert!\n" },
 { "Write back","Schreibe zurück" },
 { "KO/Pi  Synchronization","KO/Pi  Synchronisation" },
 { "Pi-Sync succesful!","Pi-Sync erfolgreich!" },
 { "Received sync request","Sync Anfrage erhalten" },
 { "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },
 { "Saving Data to temp file ...","Speichere Daten in temp Datei..." },
 { "Data saved to temp file!","Daten in temp Datei gespeichert!" },
 { "Sending file...","Sende Datei..." },
 { "Waiting for synced file...","Warte auf gesyncte Daten..." },
 { "Receiving synced file...","Gesyncte Daten erhalten..." },
 { "Received %1 bytes","%1 Bytes erhalten" },
 { "Writing file to disk...","Speichere Datei..." },
 { "Pi-Sync successful!","Pi-Sync erfolgreich!" },
 { "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },
 { "Synchronize!","Synchronisiere!" },
 { "High clock skew!","Großer Uhrzeitunterschied!" },
 { "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },
 { "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },
 { "This is a %1 recurring todo.","Das ist eine %1 wiederholende Aufgabe." },
 { "<p><b>Start on:</b> %1</p>","<p><b>Start am:</b> %1</p>" },
 { "List week view","Listenwochenansicht" },
 { "List week","Listenwochenansicht" },
 { "Next Week","Nächste Woche" },
 { "Previous Week","Vorherige Woche" },
 { "No items were found matching\nyour search expression.\nUse the wildcard characters\n'*' and '?' where needed.","Keine Einträge gefunden die\ndem Suchausdruck entsprechen.\nBenutze Platzhalter Zeichen\n'*' und '?' wo benötigt." },
 { "Show in todo/event viewer:","Zeige in Termin/Todo Anzeige:" },
 { "Details","Details" },
 { "Created time","Erstellt Zeit" },
 { "Last modified time","Geändert Zeit" },
 { "Show in What'sThis quick overview:","Zeige in What'sThis Schnellübersicht:" },
 { "View Options","Anzeige Optionen" },
 { "<b>Created: ","<b>Erstellt am: " },
 { "<b>Last modified: ","<b>Zuletzt geändert am: " },
+{ "Journal: ","Journal: " },
+{ "yearly","jährlich" },
+{ "(%1) ","%1-" },
+{ "","" },
+{ "","" },
+{ "","" },
+{ "","" },
+{ "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 
diff --git a/korganizer/kolistview.cpp b/korganizer/kolistview.cpp
index 1f5afc0..4a6e17d 100644
--- a/korganizer/kolistview.cpp
+++ b/korganizer/kolistview.cpp
@@ -1,1186 +1,1186 @@
 /*
     This file is part of KOrganizer.
     Copyright (c) 1999 Preston Brown
     Copyright (c) 2000,2001 Cornelius Schumacher <schumacher@kde.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 #include <qlistview.h>
 #include <qlayout.h>
 #include <qlabel.h>
 #include <qpopupmenu.h>
 #include <qprogressbar.h>
 #include <qfileinfo.h>
 #include <qmessagebox.h>
 #include <qdialog.h>
 #include <qtextstream.h>
 #include <qdir.h>
 #include <qwhatsthis.h>
 #include <qregexp.h>
 
 #include <klocale.h>
 #include <kdebug.h>
 #include <kiconloader.h>
 #include <kglobal.h>
 
 #include <libkdepim/kpimglobalprefs.h>
 #include <libkcal/calendar.h>
 #include <libkcal/calendarlocal.h>
 #include <libkcal/icalformat.h>
 #include <libkcal/vcalformat.h>
 #include <libkcal/recurrence.h>
 #include <libkcal/filestorage.h>
 #include <libkdepim/categoryselectdialog.h>
 #include <libkcal/kincidenceformatter.h>
 #ifndef DESKTOP_VERSION
 #include <qpe/qpeapplication.h>
 #else
 #include <qapplication.h>
 #endif
 
 #ifndef KORG_NOPRINTER
 #include "calprinter.h"
 #endif
 #include "koglobals.h"
 #include "koprefs.h"
 #include "kfiledialog.h"
 
 #include "kolistview.h"
 
 
 
 
 class KOListViewWhatsThis :public QWhatsThis
 {
 public:
   KOListViewWhatsThis( QWidget *wid, KOListView* view ) : QWhatsThis( wid ), _wid(wid),_view (view) { };
 
 protected:
   virtual QString text( const QPoint& p)
   {
     return _view->getWhatsThisText(p) ;
   }
 private:
   QWidget* _wid;
   KOListView * _view;
 };
 
 
 ListItemVisitor::ListItemVisitor(KOListViewItem *item, QDate date )
 {
     mItem = item;
     mDate = date;
 }
 
 ListItemVisitor::~ListItemVisitor()
 {
 }
 
 bool ListItemVisitor::visit(Event *e)
 {
     
     bool ok = false;
     QString start, end;
     QDate ds, de;
     if ( e->doesRecur() ) {
         ds = e->getNextOccurence( QDateTime( mDate, QTime(0,0,0)), &ok ).date();
         if ( ok ) {
             int days = e->dtStart().date().daysTo(e->dtEnd().date() );
             start = KGlobal::locale()->formatDate(ds,true);
             de = ds.addDays( days);
             end = KGlobal::locale()->formatDate(de,true);
         }
 
     } 
     if ( ! ok ) {
         start =e->dtStartDateStr();
         end = e->dtEndDateStr();
         ds = e->dtStart().date();
         de = e->dtEnd().date();
     }
     mItem->setText(0,e->summary());
     mItem->setText(1,start);
     mItem->setText(2,e->dtStartTimeStr());
     mItem->setText(3,end);
     mItem->setText(4,e->dtEndTimeStr());
     mItem->setText(5,e->isAlarmEnabled() ? i18n("Yes") : i18n("No"));
     mItem->setText(6, e->recurrence()->recurrenceText());
     mItem->setText(7,"---");
     mItem->setText(8,"---");
     mItem->setText(9, e->cancelled() ? i18n("Yes") : i18n("No"));
     mItem->setText(10,e->categoriesStr());
 
     QString key;
     QTime t = e->doesFloat() ? QTime(0,0) : e->dtStart().time();
     key.sprintf("%04d%02d%02d%02d%02d",ds.year(),ds.month(),ds.day(),t.hour(),t.minute());
     mItem->setSortKey(1,key);
 
     t = e->doesFloat() ? QTime(0,0) : e->dtEnd().time();
     key.sprintf("%04d%02d%02d%02d%02d",de.year(),de.month(),de.day(),t.hour(),t.minute());
     mItem->setSortKey(3,key);
 
     return true;
 }
 
 bool ListItemVisitor::visit(Todo *t)
 {
-    mItem->setText(0,i18n("To-Do: %1").arg(t->summary()));
+    mItem->setText(0,i18n("Todo: %1").arg(t->summary()));
     if (t->hasStartDate()) {
         mItem->setText(1,t->dtStartDateStr());
         if (t->doesFloat()) {
             mItem->setText(2,"---");
         } else {
             mItem->setText(2,t->dtStartTimeStr());
         }
     } else {
         mItem->setText(1,"---");
         mItem->setText(2,"---");
     }
     mItem->setText(3,"---");
     mItem->setText(4,"---");
     mItem->setText(5,t->isAlarmEnabled() ? i18n("Yes") : i18n("No"));
     mItem->setText(6, t->recurrence()->recurrenceText());
     if (t->hasDueDate()) {
         mItem->setText(7,t->dtDueDateStr());
         if (t->doesFloat()) {
             mItem->setText(8,"---");
         } else {
             mItem->setText(8,t->dtDueTimeStr());
         }
     } else {
         mItem->setText(7,"---");
         mItem->setText(8,"---");
     }
     mItem->setText(9, t->cancelled() ? i18n("Yes") : i18n("No"));
     mItem->setText(10,t->categoriesStr());
 
     QString key;
     QDate d;
     if (t->hasDueDate()) {
         d = t->dtDue().date();
         QTime tm = t->doesFloat() ? QTime(0,0) : t->dtDue().time();
         key.sprintf("%04d%02d%02d%02d%02d",d.year(),d.month(),d.day(),tm.hour(),tm.minute());
         mItem->setSortKey(7,key);
     }
     if ( t->hasStartDate() ) {
         d = t->dtStart().date();
         QTime tm = t->doesFloat() ? QTime(0,0) : t->dtStart().time();
         key.sprintf("%04d%02d%02d%02d%02d",d.year(),d.month(),d.day(),tm.hour(),tm.minute());
         mItem->setSortKey(1,key);
     }
     return true;
 }
 
 bool ListItemVisitor::visit(Journal * j)
 { 
-    QString des = j->description().left(50);
+    QString des = j->description().left(30);
     des = des.simplifyWhiteSpace ();
     des.replace (QRegExp ("\\n"),"" );
     des.replace (QRegExp ("\\r"),"" );
-    mItem->setText(0,i18n("Journal")+": "+des.left(25));
+    mItem->setText(0,i18n("Journal: ")+des.left(25));
     mItem->setText(1,j->dtStartDateStr());
     mItem->setText(2,"---");
     mItem->setText(3,"---");
     mItem->setText(4,"---");
     mItem->setText(5,"---");
     mItem->setText(6,"---");
     mItem->setText(7,j->dtStartDateStr());
     mItem->setText(8,"---");
     mItem->setText(9,"---");
     mItem->setText(10,i18n("Last Modified: ")+  KGlobal::locale()->formatDateTime( j->lastModified() , true) );
 
     QString key;
     QDate d = j->dtStart().date();
     key.sprintf("%04d%02d%02d",d.year(),d.month(),d.day());
     mItem->setSortKey(1,key);
     mItem->setSortKey(7,key);
 
     return true;
 }
 
 KOListView::KOListView(Calendar *calendar, QWidget *parent,
                        const char *name)
     : KOEventView(calendar, parent, name)
 {
     mActiveItem = 0;
     mListView = new KOListViewListView(this);
     mListView->addColumn(i18n("Summary"));
     mListView->addColumn(i18n("Start Date"));
     mListView->addColumn(i18n("Start Time"));
     mListView->addColumn(i18n("End Date"));
     mListView->addColumn(i18n("End Time"));
     mListView->addColumn(i18n("Alarm")); // alarm set?
     mListView->addColumn(i18n("Recurs")); // recurs?
     mListView->addColumn(i18n("Due Date"));
     mListView->addColumn(i18n("Due Time"));
     mListView->addColumn(i18n("Cancelled"));
     mListView->addColumn(i18n("Categories"));
 
     mListView->setColumnAlignment(0,AlignLeft);
     mListView->setColumnAlignment(1,AlignLeft);
     mListView->setColumnAlignment(2,AlignHCenter);
     mListView->setColumnAlignment(3,AlignLeft);
     mListView->setColumnAlignment(4,AlignHCenter);
     mListView->setColumnAlignment(5,AlignLeft);
     mListView->setColumnAlignment(6,AlignLeft);
     mListView->setColumnAlignment(7,AlignLeft);
     mListView->setColumnAlignment(8,AlignLeft);
     mListView->setColumnAlignment(9,AlignLeft);
     mListView->setColumnAlignment(10,AlignLeft);
     mListView->setColumnWidthMode(10, QListView::Manual);
     new KOListViewWhatsThis(mListView->viewport(),this);
 
     int iii = 0;
     for ( iii = 0; iii< 10 ; ++iii )
         mListView->setColumnWidthMode( iii, QListView::Manual );
 
     QBoxLayout *layoutTop = new QVBoxLayout(this);
     layoutTop->addWidget(mListView);
     mListView->setFont ( KOPrefs::instance()->mListViewFont );
     mPopupMenu = eventPopup();
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Select all"),this,
                                   SLOT(allSelection()),true);
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Deselect all"),this,
                                   SLOT(clearSelection()),true);
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Delete all selected"),this,
                                   SLOT(deleteAll()),true);
     mPopupMenu->insertSeparator();
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Save selected to file..."),this,
                                   SLOT(saveToFile()),true);
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Save Journal/Description..."),this,
                                   SLOT(saveDescriptionToFile()),true);
     // mPopupMenu->insertSeparator();
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Add Categ. to selected..."),this,
                                   SLOT(addCat()),true);
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Set Categ. for selected..."),this,
                                   SLOT(setCat()),true);
     //mPopupMenu->insertSeparator();
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Set alarm for selected..."),this,
                                   SLOT(setAlarm()),true);
 
 
 #ifndef DESKTOP_VERSION
     mPopupMenu->insertSeparator();
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Beam selected via IR"),this,
                                   SLOT(beamSelected()),true);
 #endif
     /*
       mPopupMenu = new QPopupMenu;
       mPopupMenu->insertItem(i18n("Edit Event"), this,
       SLOT (editEvent()));
       mPopupMenu->insertItem(SmallIcon("delete"), i18n("Delete Event"), this,
       SLOT (deleteEvent()));
       mPopupMenu->insertSeparator();
       mPopupMenu->insertItem(i18n("Show Dates"), this,
       SLOT(showDates()));
       mPopupMenu->insertItem(i18n("Hide Dates"), this,
       SLOT(hideDates()));
     */
     QObject::connect(mListView,SIGNAL( newEvent()),
                      this,SIGNAL(signalNewEvent()));
     QObject::connect(mListView,SIGNAL(doubleClicked(QListViewItem *)),
                      this,SLOT(defaultItemAction(QListViewItem *)));
     QObject::connect(mListView,SIGNAL(rightButtonClicked ( QListViewItem *,
                                                            const QPoint &, int )),
                      this,SLOT(popupMenu(QListViewItem *,const QPoint &,int)));
     QObject::connect(mListView,SIGNAL(currentChanged(QListViewItem *)),
                      SLOT(processSelectionChange(QListViewItem *)));
     QObject::connect(mListView,SIGNAL(showIncidence(Incidence *)),
                      SIGNAL(showIncidenceSignal(Incidence *)) );
 
     readSettings(KOGlobals::config(),"KOListView Layout");
 }
 
 KOListView::~KOListView()
 {
     delete mPopupMenu;
 }
 QString KOListView::getWhatsThisText(QPoint p)
 {
     KOListViewItem* item = ( KOListViewItem* ) mListView->itemAt( p );
     if ( item )
         return KIncidenceFormatter::instance()->getFormattedText( item->data(),
                                                                   KOPrefs::instance()->mWTshowDetails,
                                                                   KOPrefs::instance()->mWTshowCreated,
                                                                   KOPrefs::instance()->mWTshowChanged);
     return i18n("That is the list view" );
 
 }
 
 void KOListView::updateList()
 {
     // qDebug(" KOListView::updateList() ");
 
 }
 
 void KOListView::addCat( )
 {
     setCategories( false );
 }
 void KOListView::setCat()
 {
     setCategories( true );
 }
 void  KOListView::setAlarm()
 {
     KOAlarmPrefs kap( this);
     if ( !kap.exec() )
         return;
 
 
     QStringList itemList;
     QPtrList<KOListViewItem> sel ;
     QListViewItem *qitem  = mListView->firstChild ();
     while ( qitem ) {
         if ( qitem->isSelected() ) {
             Incidence* inc = ((KOListViewItem *) qitem)->data();
             if ( inc->type() != "Journal" ) {
                 if ( inc->type() == "Todo" ) {
                     if ( ((Todo*)inc)->hasDueDate() )
                       sel.append(((KOListViewItem *)qitem));
                 } else
                       sel.append(((KOListViewItem *)qitem));
             }
         }
         qitem = qitem->nextSibling();
     }
     int count = 0;
     KOListViewItem * item, *temp;
     item = sel.first();
     Incidence* inc;
     while ( item ) {
         inc = item->data();
             ++count;
             if (kap.mAlarmButton->isChecked()) {
                 if (inc->alarms().count() == 0) 
                     inc->newAlarm();
                 QPtrList<Alarm> alarms = inc->alarms();
                 Alarm *alarm;
                 for (alarm = alarms.first(); alarm; alarm = alarms.next() ) {
                     alarm->setEnabled(true);
                     int j = kap.mAlarmTimeEdit->value()* -60;
                     if (kap.mAlarmIncrCombo->currentItem() == 1)
                         j = j * 60;
                     else if (kap.mAlarmIncrCombo->currentItem() == 2)
                         j = j * (60 * 24);
                     alarm->setStartOffset( j );
 
                     if (!kap.mAlarmProgram.isEmpty() && kap.mAlarmProgramButton->isOn()) {
                         alarm->setProcedureAlarm(kap.mAlarmProgram);
                     }
                     else if (!kap.mAlarmSound.isEmpty() && kap.mAlarmSoundButton->isOn())
                         alarm->setAudioAlarm(kap.mAlarmSound);
                     else
                         alarm->setType(Alarm::Invalid);
                     //alarm->setAudioAlarm("default");
                     // TODO: Deal with multiple alarms
                     break; // For now, stop after the first alarm
                 }
             } else {
                 Alarm* alarm = inc->alarms().first();
                 if ( alarm ) {
                     alarm->setEnabled(false);
                     alarm->setType(Alarm::Invalid);
                 }
             }
         temp = item;
         item = sel.next();
         mUidDict.remove( inc->uid() ); 
         delete temp;;
         addIncidence( inc );
     }
     topLevelWidget()->setCaption( i18n("Canged alarm for %1 items").arg( count )  );
     qDebug("KO: Set alarm for %d items", count);
     calendar()->reInitAlarmSettings();
 }
 void KOListView::setCategories( bool removeOld )
 {
    
     KPIM::CategorySelectDialog* csd = new KPIM::CategorySelectDialog( KOPrefs::instance(), 0 );
     if (! csd->exec()) { 
         delete csd;
         return;
     }
     QStringList catList = csd->selectedCategories();
     delete csd;
     // if ( catList.count() == 0 )
     //   return;
     catList.sort();
     QString categoriesStr = catList.join(",");
     int i;
     QStringList itemList;
     QPtrList<KOListViewItem> sel ;
     QListViewItem *qitem  = mListView->firstChild ();
     while ( qitem ) {
         if ( qitem->isSelected() ) {
             sel.append(((KOListViewItem *)qitem));
         }
         qitem = qitem->nextSibling();
     }
     KOListViewItem * item, *temp;
     item = sel.first();
     Incidence* inc;
     while ( item ) {
         inc = item->data();
         if ( removeOld ) {
             inc->setCategories( categoriesStr );
         } else {
             itemList = QStringList::split (",", inc->categoriesStr() );
             for( i = 0; i<   catList.count(); ++i ) {
                 if (  !itemList.contains (catList[i]))
                     itemList.append( catList[i] );
             }
             itemList.sort();
             inc->setCategories( itemList.join(",") );
         }
         temp = item;
         item = sel.next();
         mUidDict.remove( inc->uid() ); 
         delete temp;;
         addIncidence( inc );
     }
 }
 
 void KOListView::beamSelected()
 {
     int icount = 0;
     QPtrList<Incidence> delSel ;
     QListViewItem *item  = mListView->firstChild ();
     while ( item ) {
         if ( item->isSelected() ) {
             delSel.append(((KOListViewItem *)item)->data());
             ++icount;
         }
         
         item = item->nextSibling();
     }
     if ( icount ) {
         emit beamIncidenceList( delSel );
         return;
         QString fn ;
         fn = QDir::homeDirPath()+"/kopitempbeamfile.vcs";
         QString mes;
         bool createbup = true;
         if ( createbup ) {
             QString description = "\n";
             CalendarLocal* cal = new CalendarLocal();
             cal->setTimeZoneId(KPimGlobalPrefs::instance()->mTimeZoneId);
             Incidence *incidence = delSel.first();
             while ( incidence ) {
                 Incidence *in = incidence->clone();
                 description += in->summary() + "\n";
                 cal->addIncidence( in );
                 incidence = delSel.next();
             }
             FileStorage storage( cal, fn, new VCalFormat );
             storage.save();
             delete cal;
             mes = i18n("KO/Pi: Ready for beaming");
             topLevelWidget()->setCaption(mes); 
 
 #ifndef DESKTOP_VERSION
             Ir *ir = new Ir( this ); 
             connect( ir, SIGNAL( done( Ir * ) ), this, SLOT( beamDone( Ir * ) ) );
             ir->send( fn, description, "text/x-vCalendar" );
 #endif
         }
     }
 }
 void KOListView::beamDone( Ir *ir )
 {
 #ifndef DESKTOP_VERSION
     delete ir;
 #endif
     topLevelWidget()->setCaption(i18n("KO/Pi:Beaming done")); 
 }
 
 void KOListView::saveDescriptionToFile()
 {
 
     int result = QMessageBox::warning( this, i18n("KO/Pi: Information!"),
                                        i18n("This saves the text/details of selected\nJournals and Events/Todos\nto a text file."),
                                        i18n("Continue"), i18n("Cancel"), 0,
                                        0, 1 );
     if ( result != 0 ) {
         return;
     }
   int icount = 0;
     QPtrList<Incidence> delSel ;
     QListViewItem *item  = mListView->firstChild ();
     while ( item ) {
         if ( item->isSelected() ) {
             delSel.append(((KOListViewItem *)item)->data());
             ++icount;
         }
         
         item = item->nextSibling();
     }
     if ( icount ) {
         QString fn =  KOPrefs::instance()->mLastSaveFile;
         fn =  KFileDialog::getSaveFileName( fn, i18n("Save filename"), this );
     
         if ( fn == "" )
             return;
         QFileInfo info;
         info.setFile( fn );
         QString mes;
         bool createbup = true;
         if ( info. exists() ) { 
             mes =  i18n("File already exists!\nOld file from:\n%1\nOverwrite?\n").arg (KGlobal::locale()->formatDateTime(info.lastModified (), true, false )  );
             int result = QMessageBox::warning( this, i18n("KO/Pi: Warning!"),mes,
                                                i18n("Overwrite!"), i18n("Cancel"), 0,
                                                0, 1 );
             if ( result != 0 ) {
                 createbup = false;
             }
         }
         if ( createbup ) {
             QString text = i18n("KO/Pi Description/Journal save file.\nSave date: ") + 
                 KGlobal::locale()->formatDateTime(QDateTime::currentDateTime(), false);
             Incidence *incidence = delSel.first();
             icount = 0;
             while ( incidence ) {
                 if ( incidence->type()  == "Journal" ) {
                     text += "\n************************************\n";
                     text += i18n("Journal from: ") +incidence->dtStartDateStr( false );
                     text +="\n" +  i18n("Last modified: ") +KGlobal::locale()->formatDateTime(incidence->lastModified(), false);
                     text +="\n" +  i18n("Description: ") + "\n"+ incidence->description();
                     ++icount;
 
                 } else {
                     if ( !incidence->description().isEmpty() ) {
                         text += "\n************************************\n";
                         if ( incidence->type()  == "Todo" )
                             text += i18n("To-Do: ");
                         text += incidence->summary();
                         if ( incidence->hasStartDate() )
                             text +="\n"+ i18n("Start Date: ") + incidence->dtStartStr( false );
                         text +="\n"+ i18n("Last modified: ") +KGlobal::locale()->formatDateTime(incidence->lastModified(), false);
                         if ( !incidence->location().isEmpty() )
                             text += "\n" +i18n("Location: ") + incidence->location();
                         text += "\n" + i18n("Description: ") + "\n" + incidence->description();
                         ++icount;
 
                     }
                 }
                 incidence = delSel.next();
             }
             QFile file( fn );
             if (!file.open( IO_WriteOnly ) ) {
                 topLevelWidget()->setCaption(i18n("File open error - nothing saved!") ); 
                 return;
             }  
             QTextStream ts( &file );
             ts << text;
             file.close();
             //qDebug("%s ", text.latin1());
             mes = i18n("KO/Pi:Saved %1 descriptions/journals").arg(icount );
             KOPrefs::instance()->mLastSaveFile = fn;
             topLevelWidget()->setCaption(mes); 
         }
     }
 }
 void KOListView::saveToFile()
 {
 
     int icount = 0;
     QPtrList<Incidence> delSel ;
     QListViewItem *item  = mListView->firstChild ();
     while ( item ) {
         if ( item->isSelected() ) {
             delSel.append(((KOListViewItem *)item)->data());
             ++icount;
         }
         
         item = item->nextSibling();
     }
     if ( icount ) {
         QString fn =  KOPrefs::instance()->mLastSaveFile;
         fn =  KFileDialog::getSaveFileName( fn, i18n("Save filename"), this );
     
         if ( fn == "" )
             return;
         QFileInfo info;
         info.setFile( fn );
         QString mes;
         bool createbup = true;
         if ( info. exists() ) { 
             mes =  i18n("File already exists!\nOld file from:\n%1\nOverwrite?\n").arg (KGlobal::locale()->formatDateTime(info.lastModified (), true, false )  );
             int result = QMessageBox::warning( this, i18n("KO/Pi: Warning!"),mes,
                                                i18n("Overwrite!"), i18n("Cancel"), 0,
                                                0, 1 );
             if ( result != 0 ) {
                 createbup = false;
             }
         }
         if ( createbup ) {
             CalendarLocal cal;
             cal.setTimeZoneId(KPimGlobalPrefs::instance()->mTimeZoneId);
             Incidence *incidence = delSel.first();
             while ( incidence ) {
                 cal.addIncidence( incidence->clone() );
                 incidence = delSel.next();
             }
             ICalFormat format;
             format.save( &cal, fn );
             mes = i18n("KO/Pi:Saved %1").arg(fn );
             KOPrefs::instance()->mLastSaveFile = fn;
             topLevelWidget()->setCaption(mes); 
         }
     }
 }
 void KOListView::deleteAll()
 {
     int icount = 0;
     QPtrList<Incidence> delSel ;
     QListViewItem *item  = mListView->firstChild ();
     while ( item ) {
         if ( item->isSelected() ) {
             delSel.append(((KOListViewItem *)item)->data());
             ++icount;
         }
         
         item = item->nextSibling();
     }
     if ( icount ) {
         Incidence *incidence = delSel.first();
         Incidence *toDelete;   
         KOPrefs *p = KOPrefs::instance();
         bool confirm = p->mConfirm;
         QString mess;
         mess = mess.sprintf( i18n("You have %d item(s) selected.\n"), icount );
         if ( KMessageBox::Continue == KMessageBox::warningContinueCancel(this, mess + i18n("All selected items will be\npermanently deleted.\n(Deleting items will take\nsome time on a PDA)\n"), i18n("KO/Pi Confirmation"),i18n("Delete")) ) {
             p->mConfirm = false;
             int delCounter = 0;
             QDialog dia ( this, "p-dialog", true ); 
             QLabel lab (i18n("Close dialog to abort deletion!"), &dia ); 
             QVBoxLayout lay( &dia );
             lay.setMargin(7); 
             lay.setSpacing(7); 
             lay.addWidget( &lab);
             QProgressBar bar( icount, &dia );
             lay.addWidget( &bar);
             int w = 220;
             int h = 50;
             int dw = QApplication::desktop()->width();
             int dh = QApplication::desktop()->height();
             dia.setGeometry( (dw-w)/2, (dh - h )/2 ,w,h );
             //dia.resize( 240,50 );
             dia.show();
             
             while ( incidence ) {
                 bar.setProgress( delCounter );
                 mess = mess.sprintf( i18n("Deleting item %d ..."), ++delCounter );
                 dia.setCaption( mess );
                 qApp->processEvents();
                 toDelete =  (incidence);
                 incidence = delSel.next();
                 emit deleteIncidenceSignal(toDelete ); 
                 if (  dia.result() != 0 )
                     break;
                
             }
             mess = mess.sprintf( i18n("%d items remaining in list."), count() );
             topLevelWidget ()->setCaption( mess );
             p->mConfirm = confirm;
         }    
     }  
         
 
 }
 int KOListView::maxDatesHint()
 {
     return 0;
 }
 
 int KOListView::currentDateCount()
 {
     return 0;
 }
 
 QPtrList<Incidence> KOListView::selectedIncidences()
 {
     QPtrList<Incidence> eventList;
     QListViewItem *item  = mListView->firstChild ();
     while ( item ) {
         if ( item->isSelected() ) {
             eventList.append(((KOListViewItem *)item)->data());
         }
 
         item = item->nextSibling();
     }
 
     //  // QListViewItem *item = mListView->selectedItem();
     //if (item) eventList.append(((KOListViewItem *)item)->data());
 
     return eventList;
 }
 
 DateList KOListView::selectedDates()
 {
     DateList eventList;
     return eventList;
 }
 
 void KOListView::showDates(bool show)
 {
     // Shouldn't we set it to a value greater 0? When showDates is called with
     // show == true at first, then the columnwidths are set to zero.
     static int oldColWidth1 = 0;
     static int oldColWidth3 = 0;
 
     if (!show) {
         oldColWidth1 = mListView->columnWidth(1);
         oldColWidth3 = mListView->columnWidth(3);
         mListView->setColumnWidth(1, 0);
         mListView->setColumnWidth(3, 0);
     } else {
         mListView->setColumnWidth(1, oldColWidth1);
         mListView->setColumnWidth(3, oldColWidth3);
     }
     mListView->repaint();
 }
 
 void KOListView::printPreview(CalPrinter *calPrinter, const QDate &fd,
                               const QDate &td)
 {
 #ifndef KORG_NOPRINTER
     calPrinter->preview(CalPrinter::Day, fd, td);
 #endif
 }
 
 void KOListView::showDates()
 {
     showDates(true);
 }
 
 void KOListView::hideDates()
 {
     showDates(false);
 }
 
 void KOListView::updateView()
 {
     mListView->setFocus();
     if ( mListView->firstChild () )
         mListView->setCurrentItem( mListView->firstChild () );
 }
 void KOListView::updateConfig()
 {
 
     mListView->setFont ( KOPrefs::instance()->mListViewFont );
     updateView();
 
 }
 void KOListView::setStartDate(const QDate &start)
 {
     mStartDate = start;
 }
 
 void KOListView::showDates(const QDate &start, const QDate &end)
 {
     clear();
     mStartDate = start;
     QDate date = start;
     QPtrList<Journal> j_list;
     while( date <= end ) {
         addEvents(calendar()->events(date));
         addTodos(calendar()->todos(date));
         Journal* jo = calendar()->journal(date);
         if ( jo )
             j_list.append( jo );
         date = date.addDays( 1 );
     }
     addJournals(j_list);
     emit incidenceSelected( 0 );
     updateView();
   
 }
 
 void KOListView::addEvents(QPtrList<Event> eventList)
 {
     Event *ev;
     for(ev = eventList.first(); ev; ev = eventList.next()) {
         addIncidence(ev);
     }
     if ( !mListView->currentItem() ){
         updateView();
     }
 }
 
 void KOListView::addTodos(QPtrList<Todo> eventList)
 {
     Todo *ev;
     for(ev = eventList.first(); ev; ev = eventList.next()) {
         addIncidence(ev);
     }
     if ( !mListView->currentItem() ){
         updateView();
     }
 }
 void KOListView::addJournals(QPtrList<Journal> eventList)
 {
     Journal *ev;
     for(ev = eventList.first(); ev; ev = eventList.next()) {
         addIncidence(ev);
     }  
     if ( !mListView->currentItem() ){
         updateView();
     }
 }
 
 void KOListView::addIncidence(Incidence *incidence)
 {
     if ( mUidDict.find( incidence->uid() ) ) return;
   
     // mListView->setFont ( KOPrefs::instance()->mListViewFont );
     mUidDict.insert( incidence->uid(), incidence );
 
     KOListViewItem *item = new KOListViewItem( incidence, mListView ); 
     ListItemVisitor v(item, mStartDate );
     if (incidence->accept(v)) return;
     else delete item;
     //qDebug("delete item ");
 }
 
 void KOListView::showEvents(QPtrList<Event> eventList)
 {
     clear();
 
     addEvents(eventList);
 
     // After new creation of list view no events are selected.
     emit incidenceSelected( 0 );
 }
 int KOListView::count()
 {
     return mListView->childCount();
 }
 
 void KOListView::changeEventDisplay(Event *event, int action)
 {
     KOListViewItem *item;
 
     switch(action) {
     case KOGlobals::EVENTADDED:
         addIncidence( event );
         break;
     case KOGlobals::EVENTEDITED:
         item = getItemForEvent(event);
         if (item) { 
             mUidDict.remove( event->uid() ); 
             delete item;
             addIncidence( event );
         }
         break;
     case KOGlobals::EVENTDELETED:
         item = getItemForEvent(event);
         if (item) {
             mUidDict.remove( event->uid() ); 
             delete item;
         }
         break;
     default:
         ;
     }
 }
 
 KOListViewItem *KOListView::getItemForEvent(Event *event)
 {
     KOListViewItem *item = (KOListViewItem *)mListView->firstChild();
     while (item) {
         if (item->data() == event) return item;
         item = (KOListViewItem *)item->nextSibling();
     }
     return 0;
 }
 
 void KOListView::defaultItemAction(QListViewItem *i)
 {
     KOListViewItem *item = static_cast<KOListViewItem *>( i );
     if ( item ) defaultAction( item->data() );
       
 }
 
 void KOListView::popupMenu(QListViewItem *item,const QPoint &,int)
 {
     mActiveItem = (KOListViewItem *)item;
     if (mActiveItem) {
         Incidence *incidence = mActiveItem->data();
         mPopupMenu->showIncidencePopup(incidence);
 
         /*
           if ( incidence && incidence->type() == "Event" ) {
           Event *event = static_cast<Event *>( incidence );
           mPopupMenu->showEventPopup(event);
           }
         */
     }
 }
 
 void KOListView::readSettings(KConfig *config, QString setting)
 {
     //  qDebug("KOListView::readSettings ");
     mListView->restoreLayout(config,setting);
 }
 
 void KOListView::writeSettings(KConfig *config, QString setting)
 {
     // qDebug("KOListView::writeSettings ");
     mListView->saveLayout(config, setting);
 }
 
 void KOListView::processSelectionChange(QListViewItem *)
 {
   
     KOListViewItem *item =
         static_cast<KOListViewItem *>( mListView->currentItem() );
 
     if ( !item ) {
         emit incidenceSelected( 0 );
     } else {
         emit incidenceSelected( item->data() );
     }
 }
 
 void KOListView::clearSelection()
 {
     mListView->selectAll( false );
 }
 void KOListView::allSelection()
 {
     mListView->selectAll( true );
 }
 
 void KOListView::clear()
 {
     mListView->clear();
     mUidDict.clear();
 }
 
 Incidence* KOListView::currentItem()
 {
     if ( mListView->currentItem()  )
         return ((KOListViewItem*) mListView->currentItem())->data();
     return 0;
 }
 void KOListView::keyPressEvent ( QKeyEvent *e) 
 {
    
     if (  e->key() == Qt::Key_Delete || e->key() == Qt::Key_Backspace ) {
         deleteAll();
         return;
     }
    
     e->ignore();
 }
 void KOListViewListView::keyPressEvent ( QKeyEvent *e) 
 {
   
     switch ( e->key() ) {
     case Qt::Key_Down:
         if ( e->state() == ShiftButton ) {
             QListViewItem* cn = currentItem();
             if ( !cn ) 
                 cn = firstChild();
             if ( !cn ) 
                 return;
             while (  cn->nextSibling() )
                 cn = cn->nextSibling();
             setCurrentItem ( cn );
             ensureItemVisible ( cn );
         
             e->accept();
             return;
         }
         if ( e->state() == ControlButton ) {
             int count = childCount ();
             int jump = count / 5;
             QListViewItem* cn;
             cn = currentItem();
             if ( ! cn )
                 return;
             if ( jump  == 0 )
                 jump = 1;
             while ( jump && cn->nextSibling() ) {
                 cn = cn->nextSibling();
                 --jump;
             }
             setCurrentItem ( cn );
             ensureItemVisible ( cn );
             
         } else
             QListView::keyPressEvent ( e ) ;
         e->accept();
         break;
               
     case Qt::Key_Up:
         if ( e->state() == ShiftButton ) {
             QListViewItem* cn = firstChild();
             if ( cn ) {
                 setCurrentItem ( cn );
                 ensureItemVisible ( cn );
             }
             e->accept();
             return;
         }
         if ( e->state() == ControlButton ) {
             int count = childCount ();
             int jump = count / 5;
             QListViewItem* cn;
             cn = currentItem();
             if ( ! cn )
                 return;
             if ( jump  == 0 )
                 jump = 1;
             while ( jump && cn->itemAbove ()) {
                 cn = cn->itemAbove ();
                 --jump;
             }
             setCurrentItem ( cn );
             ensureItemVisible ( cn );
         } else
             QListView::keyPressEvent ( e ) ;
         e->accept();
         break;   
     case Qt::Key_I: {
         QListViewItem* cn;
         cn = currentItem();
         if ( cn ) {
             KOListViewItem* ci = (KOListViewItem*)( cn ); 
             if ( ci ){
                 emit showIncidence( ci->data());
                 cn = cn->nextSibling();
                 if ( cn ) {
                     setCurrentItem ( cn );
                     ensureItemVisible ( cn );
                 }
             }
         }
         e->accept();
     }
         break;          
     case Qt::Key_Return:
     case Qt::Key_Enter:
         {
             QListViewItem* cn;
             cn = currentItem();
             if ( cn ) {
                 KOListViewItem* ci = (KOListViewItem*)( cn ); 
                 if ( ci ){ 
                     if ( e->state() == ShiftButton )
                         ci->setSelected( false );
                     else
                         ci->setSelected( true );
                     cn = cn->nextSibling();
                     if ( cn ) {
                         setCurrentItem ( cn );
                         ensureItemVisible ( cn );
                     }
                 }
             }
             e->accept();
         }
     break;             
     default:
         e->ignore();
     }
 }
 KOListViewListView::KOListViewListView(KOListView * lv ) 
     : KListView( lv )
 {
 #ifndef DESKTOP_VERSION
     QPEApplication::setStylusOperation(viewport(), QPEApplication::RightOnHold );
 #endif
     mYMousePos = -1000;
     setSelectionMode( QListView::Multi );   
     setMultiSelection( true);
     mAllowPopupMenu = true;
     mMouseDown = false;
     
 }
 void KOListViewListView::contentsMouseDoubleClickEvent(QMouseEvent *e)
 {
     if (!e) return;
     QPoint vp = contentsToViewport(e->pos());
     QListViewItem *item = itemAt(vp);
     if (!item) {
         emit newEvent();
         return;
     }
     KListView::contentsMouseDoubleClickEvent(e);
 }
 
 
 void KOListViewListView::contentsMousePressEvent(QMouseEvent *e)
 {
     //qDebug("contentsMousePressEvent++++ ");
     if (! mMouseDown ) {
         mAllowPopupMenu = true;
         mYMousePos = mapToGlobal( (e->pos())).y();
     }
     if (  e->button() == RightButton &&  mMouseDown   )
         return;
     if (  e->button() == LeftButton )
         mMouseDown = true;
     KListView::contentsMousePressEvent( e );
 }
 void KOListViewListView::contentsMouseReleaseEvent(QMouseEvent *e)
 {
     //qDebug("contentsMouseReleaseEv---- ");
     if ( ! mMouseDown  ) {
         if (  e->button() == RightButton && ! mAllowPopupMenu   )
             return;
         QListViewItem* ci = currentItem(); 
         if ( ci ) 
             ci->setSelected( true );
         KListView::contentsMouseReleaseEvent(e);
         return;
     }
     if (  e->button() == LeftButton )
         mMouseDown = false;   
     if (  e->button() == RightButton && ! mAllowPopupMenu   )
         return;
     if (  e->button() == RightButton ) {
         QListViewItem* ci = currentItem(); 
         if ( ci ) 
             ci->setSelected( true );
     }
     KListView::contentsMouseReleaseEvent(e);
 }
 void KOListViewListView::contentsMouseMoveEvent(QMouseEvent *e)
 {
     // qDebug("contentsMouseMoveEv....... ");
     //  qDebug("start: %d  current %d ",mYMousePos , mapToGlobal( (e->pos())).y()   );
     int diff = mYMousePos - mapToGlobal( (e->pos())).y();
     if ( diff < 0 ) diff = -diff;
     if ( diff > 20 )
         mAllowPopupMenu = false;
     KListView::contentsMouseMoveEvent(e);
 }
diff --git a/libkcal/recurrence.cpp b/libkcal/recurrence.cpp
index 5181eaf..8a175c9 100644
--- a/libkcal/recurrence.cpp
+++ b/libkcal/recurrence.cpp
@@ -1,3284 +1,3290 @@
 /*
     This file is part of libkcal.
     Copyright (c) 1998 Preston Brown
     Copyright (c) 2001 Cornelius Schumacher <schumacher@kde.org>
     Copyright (c) 2002 David Jarvie <software@astrojar.org.uk>
 
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
     version 2 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 
 #include <limits.h>
 
 #include <kdebug.h>
 #include <kglobal.h>
 #include <klocale.h>
 
 #include "incidence.h"
 
 #include "recurrence.h"
 
 using namespace KCal;
 
 Recurrence::Feb29Type Recurrence::mFeb29YearlyDefaultType = Recurrence::rMar1;
 
 
 Recurrence::Recurrence(Incidence *parent, int compatVersion)
 : recurs(rNone),   // by default, it's not a recurring event
   rWeekStart(1),   // default is Monday
   rDays(7),
   mFloats(parent ? parent->doesFloat() : false),
   mRecurReadOnly(false),
   mRecurExDatesCount(0),
   mFeb29YearlyType(mFeb29YearlyDefaultType),
   mCompatVersion(compatVersion ? compatVersion : INT_MAX),
   mCompatRecurs(rNone),
   mCompatDuration(0),
   mParent(parent)
 {
   rMonthDays.setAutoDelete( true );
   rMonthPositions.setAutoDelete( true );
   rYearNums.setAutoDelete( true );
 }
 
 Recurrence::Recurrence(const Recurrence &r, Incidence *parent)
 : recurs(r.recurs),
   rWeekStart(r.rWeekStart),
   rDays(r.rDays.copy()),
   rFreq(r.rFreq),
   rDuration(r.rDuration),
   rEndDateTime(r.rEndDateTime),
   mRecurStart(r.mRecurStart),
   mFloats(r.mFloats),
   mRecurReadOnly(r.mRecurReadOnly),
   mRecurExDatesCount(r.mRecurExDatesCount),
   mFeb29YearlyType(r.mFeb29YearlyType),
   mCompatVersion(r.mCompatVersion),
   mCompatRecurs(r.mCompatRecurs),
   mCompatDuration(r.mCompatDuration),
   mParent(parent)
 {
   for (QPtrListIterator<rMonthPos> mp(r.rMonthPositions);  mp.current();  ++mp) {
     rMonthPos *tmp = new rMonthPos;
     tmp->rPos     = mp.current()->rPos;
     tmp->negative = mp.current()->negative;
     tmp->rDays    = mp.current()->rDays.copy();
     rMonthPositions.append(tmp);
   }
   for (QPtrListIterator<int> md(r.rMonthDays);  md.current();  ++md) {
     int *tmp = new int;
     *tmp = *md.current();
     rMonthDays.append(tmp);
   }
   for (QPtrListIterator<int> yn(r.rYearNums);  yn.current();  ++yn) {
     int *tmp = new int;
     *tmp = *yn.current();
     rYearNums.append(tmp);
   }
   rMonthDays.setAutoDelete( true );
   rMonthPositions.setAutoDelete( true );
   rYearNums.setAutoDelete( true );
 }
 
 Recurrence::~Recurrence()
 {
 }
 
 
 bool Recurrence::operator==( const Recurrence& r2 ) const
 {  
       
     // the following line is obvious
     if (  recurs == rNone &&  r2.recurs == rNone )
         return true;
     // we need the above line, because two non recurring events may
     // differ in the other settings, because one (or both) 
     // may be not initialized properly
 
     if ( recurs != r2.recurs
   ||   rFreq != r2.rFreq
   ||   rDuration != r2.rDuration
   ||   !rDuration && rEndDateTime != r2.rEndDateTime
   ||   mRecurStart != r2.mRecurStart
   ||   mFloats != r2.mFloats
   ||   mRecurReadOnly != r2.mRecurReadOnly
   ||   mRecurExDatesCount != r2.mRecurExDatesCount )
     return false;
   // no need to compare mCompat* and mParent
   // OK to compare the pointers
   switch ( recurs )
   {
     case rWeekly:
       return rDays == r2.rDays
       &&     rWeekStart == r2.rWeekStart;
   case rMonthlyPos: {
       QPtrList<rMonthPos> MonthPositions = rMonthPositions;
       QPtrList<rMonthPos> MonthPositions2 = r2.rMonthPositions;
       if ( !MonthPositions.count() )
           return false;
       if ( !MonthPositions2.count() )
           return false;
       return MonthPositions.first()->rPos == MonthPositions2.first()->rPos;
   }
   case rMonthlyDay: {
       QPtrList<int> MonthDays = rMonthDays ; 
       QPtrList<int> MonthDays2 = r2.rMonthDays ;  
       if ( !MonthDays.count() )
           return false;
       if ( !MonthDays2.count() )
           return false; 
       return *MonthDays.first() == *MonthDays2.first() ;
   }
   case rYearlyPos: {
 
       QPtrList<int> YearNums = rYearNums;
       QPtrList<int> YearNums2 = r2.rYearNums;
       if ( *YearNums.first() != *YearNums2.first() )
           return false;
       QPtrList<rMonthPos> MonthPositions = rMonthPositions;
       QPtrList<rMonthPos> MonthPositions2 = r2.rMonthPositions;
       if ( !MonthPositions.count() )
           return false;
       if ( !MonthPositions2.count() )
           return false;
       return MonthPositions.first()->rPos == MonthPositions2.first()->rPos;
      
   }
   case rYearlyMonth: {
       QPtrList<int> YearNums = rYearNums;
       QPtrList<int> YearNums2 = r2.rYearNums;
       return ( *YearNums.first() == *YearNums2.first()  && mFeb29YearlyType == r2.mFeb29YearlyType);
   }
       case rYearlyDay: {
       QPtrList<int> YearNums = rYearNums;
       QPtrList<int> YearNums2 = r2.rYearNums;
       return ( *YearNums.first() == *YearNums2.first() );
       }
     case rNone:
     case rMinutely:
     case rHourly:
     case rDaily:
     default:
       return true;
   }
 }
 /*
 bool  Recurrence::compareLists( const QPtrList<int> &l1 ,const QPtrList<int> &l2)
 {
     if ( l1.count() != l2.count() )
         return false;
     int count = l1.count();
     int i;
     for ( i = 0; i < count ; ++i ) {
         // if ( l1.at(i) != l2.at(i)   )
         return false;
         qDebug("compüare ");
     }
     return true;
 }
 */
 QString Recurrence::recurrenceText() const
 {
-    QString recurText = i18n("No");
+    QString recurText;
     if ( recurs == Recurrence::rMinutely  )
         recurText = i18n("minutely");
     else if ( recurs == Recurrence::rHourly  )
         recurText = i18n("hourly");
     else if ( recurs == Recurrence::rDaily  )
         recurText = i18n("daily");
     else if ( recurs ==  Recurrence::rWeekly ) 
         recurText = i18n("weekly");
     else if ( recurs == Recurrence::rMonthlyPos  )
         recurText = i18n("monthly");
     else if ( recurs ==  Recurrence::rMonthlyDay )
-        recurText = i18n("day-monthly");
+        recurText = i18n("monthly");
     else if ( recurs ==  Recurrence::rYearlyMonth )
-        recurText = i18n("month-yearly");
+        recurText = i18n("yearly");
     else if ( recurs ==  Recurrence::rYearlyDay )
         recurText = i18n("day-yearly");
     else if ( recurs ==  Recurrence::rYearlyPos )
         recurText = i18n("position-yearly");
+    if ( !recurText.isEmpty() ) {
+        if ( rFreq > 1 ){
+            recurText = i18n("(%1) ").arg(rFreq ) + recurText;
+        }
+    } else
+         recurText = i18n("No");
     return recurText;
 }
 
 void Recurrence::setCompatVersion(int version)
 {
   mCompatVersion = version ? version : INT_MAX;
 }
 
 ushort Recurrence::doesRecur() const
 {
   return recurs;
 }
 
 bool Recurrence::recursOnPure(const QDate &qd) const
 {
   switch(recurs) {
     case rMinutely:
       return recursSecondly(qd, rFreq*60);
     case rHourly:
       return recursSecondly(qd, rFreq*3600);
     case rDaily:
       return recursDaily(qd);
     case rWeekly:
       return recursWeekly(qd);
     case rMonthlyPos:
     case rMonthlyDay:
       return recursMonthly(qd);
     case rYearlyMonth:
       return recursYearlyByMonth(qd);
     case rYearlyDay:
       return recursYearlyByDay(qd);
     case rYearlyPos:
       return recursYearlyByPos(qd);
     default:
         return false;
     case rNone:
       return false;
   } // case
   return false;
 }
 
 bool Recurrence::recursAtPure(const QDateTime &dt) const
 {
   switch(recurs) {
   case rMinutely:
     return recursMinutelyAt(dt, rFreq);
   case rHourly:
     return recursMinutelyAt(dt, rFreq*60);
   default:
     if (dt.time() != mRecurStart.time())
       return false;
     switch(recurs) {
       case rDaily:
         return recursDaily(dt.date());
       case rWeekly:
         return recursWeekly(dt.date());
       case rMonthlyPos:
       case rMonthlyDay:
         return recursMonthly(dt.date());
       case rYearlyMonth:
         return recursYearlyByMonth(dt.date());
       case rYearlyDay:
         return recursYearlyByDay(dt.date());
       case rYearlyPos:
         return recursYearlyByPos(dt.date());
       default:
           return false;
       case rNone:
         return false;
     }
   } // case
   return false;
 }
 
 QDate Recurrence::endDate() const
 {
   int count = 0;
   QDate end;
   if (recurs != rNone) {
     if (rDuration < 0)
       return QDate();    // infinite recurrence
     if (rDuration == 0)
       return rEndDateTime.date();
 
     // The end date is determined by the recurrence count
     QDate dStart = mRecurStart.date();
     switch (recurs)
     {
     case rMinutely:
       return mRecurStart.addSecs((rDuration-1+mRecurExDatesCount)*rFreq*60).date();
     case rHourly:
       return mRecurStart.addSecs((rDuration-1+mRecurExDatesCount)*rFreq*3600).date();
     case rDaily:
       return dStart.addDays((rDuration-1+mRecurExDatesCount)*rFreq);
 
     case rWeekly:
       count = weeklyCalc(END_DATE_AND_COUNT, end);
       break;
     case rMonthlyPos:
     case rMonthlyDay:
       count = monthlyCalc(END_DATE_AND_COUNT, end);
       break;
     case rYearlyMonth:
       count = yearlyMonthCalc(END_DATE_AND_COUNT, end);
       break;
     case rYearlyDay:
       count = yearlyDayCalc(END_DATE_AND_COUNT, end);
       break;
     case rYearlyPos:
       count = yearlyPosCalc(END_DATE_AND_COUNT, end);
       break;
     default:
       // catch-all.  Should never get here.
       kdDebug(5800) << "Control should never reach here in endDate()!" << endl;
       break;
     }
   }
   if (!count)
     return QDate();     // error - there is no recurrence
   return end;
 }
 
 QDateTime Recurrence::endDateTime() const
 {
   int count = 0;
   QDate end;
   if (recurs != rNone) {
     if (rDuration < 0)
       return QDateTime();    // infinite recurrence
     if (rDuration == 0)
       return rEndDateTime;
 
     // The end date is determined by the recurrence count
     QDate dStart = mRecurStart.date();
     switch (recurs)
     {
     case rMinutely:
       return mRecurStart.addSecs((rDuration-1+mRecurExDatesCount)*rFreq*60);
     case rHourly:
       return mRecurStart.addSecs((rDuration-1+mRecurExDatesCount)*rFreq*3600);
     case rDaily:
       return dStart.addDays((rDuration-1+mRecurExDatesCount)*rFreq);
 
     case rWeekly:
       count = weeklyCalc(END_DATE_AND_COUNT, end);
       break;
     case rMonthlyPos:
     case rMonthlyDay:
       count = monthlyCalc(END_DATE_AND_COUNT, end);
       break;
     case rYearlyMonth:
       count = yearlyMonthCalc(END_DATE_AND_COUNT, end);
       break;
     case rYearlyDay:
       count = yearlyDayCalc(END_DATE_AND_COUNT, end);
       break;
     case rYearlyPos:
       count = yearlyPosCalc(END_DATE_AND_COUNT, end);
       break;
     default:
       // catch-all.  Should never get here.
       kdDebug(5800) << "Control should never reach here in endDate()!" << endl;
       break;
     }
   }
   if (!count)
     return QDateTime();     // error - there is no recurrence
   return QDateTime(end, mRecurStart.time());
 }
 
 int Recurrence::durationTo(const QDate &date) const
 {
   QDate d = date;
   return recurCalc(COUNT_TO_DATE, d);
 }
 
 int Recurrence::durationTo(const QDateTime &datetime) const
 {
   QDateTime dt = datetime;
   return recurCalc(COUNT_TO_DATE, dt);
 }
 
 void Recurrence::unsetRecurs()
 {
   if (mRecurReadOnly) return;
   recurs = rNone;
   rMonthPositions.clear();
   rMonthDays.clear();
   rYearNums.clear();
 }
 
 void Recurrence::setRecurStart(const QDateTime &start)
 {
   mRecurStart = start;
   mFloats = false;
   switch (recurs)
   {
     case rMinutely:
     case rHourly:
       break;
     case rDaily:
     case rWeekly:
     case rMonthlyPos:
     case rMonthlyDay:
     case rYearlyMonth:
     case rYearlyDay:
     case rYearlyPos:
     default:
       rEndDateTime.setTime(start.time());
       break;
   }
 }
 
 void Recurrence::setRecurStart(const QDate &start)
 {
   mRecurStart.setDate(start);
   mRecurStart.setTime(QTime(0,0,0));
   switch (recurs)
   {
     case rMinutely:
     case rHourly:
       break;
     case rDaily:
     case rWeekly:
     case rMonthlyPos:
     case rMonthlyDay:
     case rYearlyMonth:
     case rYearlyDay:
     case rYearlyPos:
     default:
       mFloats = true;
       break;
   }
 }
 
 void Recurrence::setFloats(bool f)
 {
   switch (recurs)
   {
     case rDaily:
     case rWeekly:
     case rMonthlyPos:
     case rMonthlyDay:
     case rYearlyMonth:
     case rYearlyDay:
     case rYearlyPos:
       break;
     case rMinutely:
     case rHourly:
     default:
       return;     // can't set sub-daily to floating
   }
   mFloats = f;
   if (f) {
     mRecurStart.setTime(QTime(0,0,0));
     rEndDateTime.setTime(QTime(0,0,0));
   }
 }
 
 int Recurrence::frequency() const
 {
   return rFreq;
 }
 
 int Recurrence::duration() const
 {
   return rDuration;
 }
 
 void Recurrence::setDuration(int _rDuration)
 {
   if (mRecurReadOnly) return;
   if (_rDuration > 0) {
     rDuration = _rDuration;
     // Compatibility mode is only needed when reading the calendar in ICalFormatImpl,
     // so explicitly setting the duration means no backwards compatibility is needed.
     mCompatDuration = 0;
   }
 }
 
 QString Recurrence::endDateStr(bool shortfmt) const
 {
   return KGlobal::locale()->formatDate(rEndDateTime.date(),shortfmt);
 }
 
 const QBitArray &Recurrence::days() const
 {
   return rDays;
 }
 
 const QPtrList<Recurrence::rMonthPos> &Recurrence::monthPositions() const
 {
   return rMonthPositions;
 }
 
 const QPtrList<Recurrence::rMonthPos> &Recurrence::yearMonthPositions() const
 {
   return rMonthPositions;
 }
 
 const QPtrList<int> &Recurrence::monthDays() const
 {
   return rMonthDays;
 }
 
 void Recurrence::setMinutely(int _rFreq, int _rDuration)
 {
   if (mRecurReadOnly || _rDuration == 0 || _rDuration < -1)
     return;
   setDailySub(rMinutely, _rFreq, _rDuration);
 }
 
 void Recurrence::setMinutely(int _rFreq, const QDateTime &_rEndDateTime)
 {
   if (mRecurReadOnly) return;
   rEndDateTime = _rEndDateTime;
   setDailySub(rMinutely, _rFreq, 0);
 }
 
 void Recurrence::setHourly(int _rFreq, int _rDuration)
 {
   if (mRecurReadOnly || _rDuration == 0 || _rDuration < -1)
     return;
   setDailySub(rHourly, _rFreq, _rDuration);
 }
 
 void Recurrence::setHourly(int _rFreq, const QDateTime &_rEndDateTime)
 {
   if (mRecurReadOnly) return;
   rEndDateTime = _rEndDateTime;
   setDailySub(rHourly, _rFreq, 0);
 }
 
 void Recurrence::setDaily(int _rFreq, int _rDuration)
 {
   if (mRecurReadOnly || _rDuration == 0 || _rDuration < -1)
     return;
   setDailySub(rDaily, _rFreq, _rDuration);
 }
 
 void Recurrence::setDaily(int _rFreq, const QDate &_rEndDate)
 {
   if (mRecurReadOnly) return;
   rEndDateTime.setDate(_rEndDate);
   rEndDateTime.setTime(mRecurStart.time());
   setDailySub(rDaily, _rFreq, 0);
 }
 
 void Recurrence::setWeekly(int _rFreq, const QBitArray &_rDays,
                                int _rDuration, int _rWeekStart)
 {
   if (mRecurReadOnly || _rDuration == 0 || _rDuration < -1)
     return;
   recurs = rWeekly;
 
   rFreq = _rFreq;
   rDays = _rDays;
   rWeekStart = _rWeekStart;
   rDuration = _rDuration;
   if (mCompatVersion < 310 && _rDuration > 0) {
     // Backwards compatibility for KDE < 3.1.
     // rDuration was set to the number of time periods to recur,
     // with week start always on a Monday.
     // Convert this to the number of occurrences.
     mCompatDuration = _rDuration;
     int weeks = ((mCompatDuration-1+mRecurExDatesCount)*7) + (7 - mRecurStart.date().dayOfWeek());
     QDate end(mRecurStart.date().addDays(weeks * rFreq));
     rDuration = INT_MAX;    // ensure that weeklyCalc() does its job correctly
     rDuration = weeklyCalc(COUNT_TO_DATE, end);
   } else {
     mCompatDuration = 0;
   }
   rMonthPositions.clear();
   rMonthDays.clear();
   if (mParent) mParent->updated();
 }
 
 void Recurrence::setWeekly(int _rFreq, const QBitArray &_rDays,
                                const QDate &_rEndDate, int _rWeekStart)
 {
   if (mRecurReadOnly) return;
   recurs = rWeekly;
 
   rFreq = _rFreq;
   rDays = _rDays;
   rWeekStart = _rWeekStart;
   rEndDateTime.setDate(_rEndDate);
   rEndDateTime.setTime(mRecurStart.time());
   rDuration = 0; // set to 0 because there is an end date
   mCompatDuration = 0;
   rMonthPositions.clear();
   rMonthDays.clear();
   rYearNums.clear();
   if (mParent) mParent->updated();
 }
 
 void Recurrence::setMonthly(short type, int _rFreq, int _rDuration)
 {
   if (mRecurReadOnly || _rDuration == 0 || _rDuration < -1)
     return;
   recurs = type;
 
   rFreq = _rFreq;
   rDuration = _rDuration;
   if (mCompatVersion < 310)
     mCompatDuration = (_rDuration > 0) ? _rDuration : 0;
   rYearNums.clear();
   if (mParent) mParent->updated();
 }
 
 void Recurrence::setMonthly(short type, int _rFreq,
                             const QDate &_rEndDate)
 {
   if (mRecurReadOnly) return;
   recurs = type;
 
   rFreq = _rFreq;
   rEndDateTime.setDate(_rEndDate);
   rEndDateTime.setTime(mRecurStart.time());
   rDuration = 0; // set to 0 because there is an end date
   mCompatDuration = 0;
   rYearNums.clear();
   if (mParent) mParent->updated();
 }
 
 void Recurrence::addMonthlyPos(short _rPos, const QBitArray &_rDays)
 {
   if (recurs == rMonthlyPos)
     addMonthlyPos_(_rPos, _rDays);
 }
 
 void Recurrence::addMonthlyPos_(short _rPos, const QBitArray &_rDays)
 {
   if (mRecurReadOnly
   ||  _rPos == 0 || _rPos > 5 || _rPos < -5)    // invalid week number
     return;
 
   for (rMonthPos* it = rMonthPositions.first();  it;  it = rMonthPositions.next()) {
     int itPos = it->negative ? -it->rPos : it->rPos;
     if (_rPos == itPos) {
       // This week is already in the list.
       // Combine the specified days with those in the list.
       it->rDays |= _rDays;
       if (mParent) mParent->updated();
       return;
     }
   }
   // Add the new position to the list
   rMonthPos *tmpPos = new rMonthPos;
   if (_rPos > 0) {
     tmpPos->rPos = _rPos;
     tmpPos->negative = false;
   } else {
     tmpPos->rPos = -_rPos; // take abs()
     tmpPos->negative = true;
   }
   tmpPos->rDays = _rDays;
   tmpPos->rDays.detach();
   rMonthPositions.append(tmpPos);
 
   if (mCompatVersion < 310 && mCompatDuration > 0) {
     // Backwards compatibility for KDE < 3.1.
     // rDuration was set to the number of time periods to recur.
     // Convert this to the number of occurrences.
     int monthsAhead = (mCompatDuration-1+mRecurExDatesCount) * rFreq;
     int month = mRecurStart.date().month() - 1 + monthsAhead;
     QDate end(mRecurStart.date().year() + month/12, month%12 + 1, 31);
     rDuration = INT_MAX;    // ensure that recurCalc() does its job correctly
     rDuration = recurCalc(COUNT_TO_DATE, end);
   }
 
   if (mParent) mParent->updated();
 }
 
 void Recurrence::addMonthlyDay(short _rDay)
 {
   if (mRecurReadOnly || (recurs != rMonthlyDay && recurs != rYearlyMonth)
   ||  _rDay == 0 || _rDay > 31 || _rDay < -31)   // invalid day number
     return;
   for (int* it = rMonthDays.first();  it;  it = rMonthDays.next()) {
     if (_rDay == *it)
       return;        // this day is already in the list - avoid duplication
   }
   int *tmpDay = new int;
   *tmpDay = _rDay;
   rMonthDays.append(tmpDay);
 
   if (mCompatVersion < 310 && mCompatDuration > 0) {
     // Backwards compatibility for KDE < 3.1.
     // rDuration was set to the number of time periods to recur.
     // Convert this to the number of occurrences.
     int monthsAhead = (mCompatDuration-1+mRecurExDatesCount) * rFreq;
     int month = mRecurStart.date().month() - 1 + monthsAhead;
     QDate end(mRecurStart.date().year() + month/12, month%12 + 1, 31);
     rDuration = INT_MAX;    // ensure that recurCalc() does its job correctly
     rDuration = recurCalc(COUNT_TO_DATE, end);
   }
 
   if (mParent) mParent->updated();
 }
 
 void Recurrence::setYearly(int type, int _rFreq, int _rDuration)
 {
   if (mRecurReadOnly || _rDuration == 0 || _rDuration < -1)
     return;
   if (mCompatVersion < 310)
     mCompatDuration = (_rDuration > 0) ? _rDuration : 0;
   setYearly_(type, mFeb29YearlyDefaultType, _rFreq, _rDuration);
 }
 
 void Recurrence::setYearly(int type, int _rFreq, const QDate &_rEndDate)
 {
   if (mRecurReadOnly) return;
   rEndDateTime.setDate(_rEndDate);
   rEndDateTime.setTime(mRecurStart.time());
   mCompatDuration = 0;
   setYearly_(type, mFeb29YearlyDefaultType, _rFreq, 0);
 }
 
 void Recurrence::setYearlyByDate(Feb29Type type, int _rFreq, int _rDuration)
 {
   if (mRecurReadOnly || _rDuration == 0 || _rDuration < -1)
     return;
   if (mCompatVersion < 310)
     mCompatDuration = (_rDuration > 0) ? _rDuration : 0;
   setYearly_(rYearlyMonth, type, _rFreq, _rDuration);
 }
 
 void Recurrence::setYearlyByDate(Feb29Type type, int _rFreq, const QDate &_rEndDate)
 {
   if (mRecurReadOnly) return;
   rEndDateTime.setDate(_rEndDate);
   rEndDateTime.setTime(mRecurStart.time());
   mCompatDuration = 0;
   setYearly_(rYearlyMonth, type, _rFreq, 0);
 }
 
 void Recurrence::addYearlyMonthPos(short _rPos, const QBitArray &_rDays)
 {
   if (recurs == rYearlyPos)
     addMonthlyPos_(_rPos, _rDays);
 }
 
 const QPtrList<int> &Recurrence::yearNums() const
 {
   return rYearNums;
 }
 void Recurrence::addYearlyMonth(short _rPos )
 { 
     if (mRecurReadOnly  ||  recurs != rYearlyMonth)    // invalid day/month number
     return;
   rMonthPos *tmpPos = new rMonthPos;
   if ( _rPos > 0) {
     tmpPos->rPos = _rPos;
     tmpPos->negative = false;
   } else {
     tmpPos->rPos = -_rPos; // take abs()
     tmpPos->negative = true;
   }
   rMonthPositions.append(tmpPos);
 }
 void Recurrence::addYearlyNum(short _rNum)
 {
   if (mRecurReadOnly
   ||  (recurs != rYearlyMonth && recurs != rYearlyDay && recurs != rYearlyPos)
   ||  _rNum <= 0)    // invalid day/month number
     return;
 
   if (mCompatVersion < 310 && mCompatRecurs == rYearlyDay) {
     // Backwards compatibility for KDE < 3.1.
     // Dates were stored as day numbers, with a fiddle to take account of leap years.
     // Convert the day number to a month.
     if (_rNum <= 0 || _rNum > 366 || (_rNum == 366 && mRecurStart.date().daysInYear() < 366))
       return;     // invalid day number
     _rNum = QDate(mRecurStart.date().year(), 1, 1).addDays(_rNum - 1).month();
   } else
   if ((recurs == rYearlyMonth || recurs == rYearlyPos) && _rNum > 12
   ||  recurs == rYearlyDay && _rNum > 366)
     return;     // invalid day number
 
   uint i = 0;
   for (int* it = rYearNums.first();  it && _rNum >= *it;  it = rYearNums.next()) {
     if (_rNum == *it)
       return;        // this day/month is already in the list - avoid duplication
     ++i;
   }
 
   int *tmpNum = new int;
   *tmpNum = _rNum;
   rYearNums.insert(i, tmpNum);   // insert the day/month in a sorted position
 
   if (mCompatVersion < 310 && mCompatDuration > 0) {
     // Backwards compatibility for KDE < 3.1.
     // rDuration was set to the number of time periods to recur.
     // Convert this to the number of occurrences.
     QDate end(mRecurStart.date().year() + (mCompatDuration-1+mRecurExDatesCount)*rFreq, 12, 31);
     rDuration = INT_MAX;    // ensure that recurCalc() does its job correctly
     rDuration = recurCalc(COUNT_TO_DATE, end);
   }
 
   if (mParent) mParent->updated();
 }
 
 
 QDateTime Recurrence::getNextDateTime(const QDateTime &preDateTime, bool *last) const
 {  
     if (last)
         *last = false;
   int freq;
   switch (recurs)
   {
     case rMinutely:
       freq = rFreq * 60;
       break;
     case rHourly:
       freq = rFreq * 3600;
       break;
     case rDaily:
     case rWeekly:
     case rMonthlyPos:
     case rMonthlyDay:
     case rYearlyMonth:
     case rYearlyDay:
     case rYearlyPos: {
       QDate preDate = preDateTime.date();
       if (!mFloats && mRecurStart.time() > preDateTime.time())
         preDate = preDate.addDays(-1);
       return QDateTime(getNextDateNoTime(preDate, last), mRecurStart.time());
     }
     default:
       return QDateTime();
   }
 
   // It's a sub-daily recurrence
   if (preDateTime < mRecurStart)
     return mRecurStart;
   int count = mRecurStart.secsTo(preDateTime) / freq + 2;
   if (rDuration > 0) {
     if (count > rDuration)
       return QDateTime();
     if (last && count == rDuration)
       *last = true;
   }
   QDateTime endtime = mRecurStart.addSecs((count - 1)*freq);
   if (rDuration == 0) {
     if (endtime > rEndDateTime)
       return QDateTime();
     if (last && endtime == rEndDateTime)
       *last = true;
   }
   return endtime;
 }
 
 QDate Recurrence::getNextDate(const QDate &preDate, bool *last) const
 { 
     if (last)
         *last = false;
     switch (recurs)
   {
     case rMinutely:
     case rHourly:
       return getNextDateTime(QDateTime(preDate, QTime(23,59,59)), last).date();
     case rDaily:
     case rWeekly:
     case rMonthlyPos:
     case rMonthlyDay:
     case rYearlyMonth:
     case rYearlyDay:
     case rYearlyPos:
         qDebug("Recurrence::getNextDate: MAY BE BROKEN ");
       return getNextDateNoTime(preDate, last);
     default:
       return QDate();
   }
 }
 
 
 QDateTime Recurrence::getPreviousDateTime(const QDateTime &afterDateTime, bool *last) const
 {
     if (last)
         *last = false;
   int freq;
   switch (recurs)
   {
     case rMinutely:
       freq = rFreq * 60;
       break;
     case rHourly:
       freq = rFreq * 3600;
       break;
     case rDaily:
     case rWeekly:
     case rMonthlyPos:
     case rMonthlyDay:
     case rYearlyMonth:
     case rYearlyDay:
     case rYearlyPos: {
       QDate afterDate = afterDateTime.date();
       if (!mFloats && mRecurStart.time() < afterDateTime.time())
         afterDate = afterDate.addDays(1);
       return QDateTime(getPreviousDateNoTime(afterDate, last), mRecurStart.time());
     }
     default:
       return QDateTime();
   }
 
   // It's a sub-daily recurrence
   if (afterDateTime <= mRecurStart)
     return QDateTime();
   int count = (mRecurStart.secsTo(afterDateTime) - 1) / freq + 1;
   if (rDuration > 0) {
     if (count > rDuration)
       count = rDuration;
     if (last && count == rDuration)
       *last = true;
   }
   QDateTime endtime = mRecurStart.addSecs((count - 1)*freq);
   if (rDuration == 0) {
     if (endtime > rEndDateTime)
       endtime = rEndDateTime;
     if (last && endtime == rEndDateTime)
       *last = true;
   }
   return endtime;
 }
 
 QDate Recurrence::getPreviousDate(const QDate &afterDate, bool *last) const
 {
   if (last)
         *last = false;
   switch (recurs)
   {
     case rMinutely:
     case rHourly:
       return getPreviousDateTime(QDateTime(afterDate, QTime(0,0,0)), last).date();
     case rDaily:
     case rWeekly:
     case rMonthlyPos:
     case rMonthlyDay:
     case rYearlyMonth:
     case rYearlyDay:
     case rYearlyPos:
       return getPreviousDateNoTime(afterDate, last);
     default:
       return QDate();
   }
 }
 
 
 /***************************** PROTECTED FUNCTIONS ***************************/
 
 bool Recurrence::recursSecondly(const QDate &qd, int secondFreq) const
 {
   if ((qd >= mRecurStart.date()) &&
       ((rDuration > 0) && (qd <= endDate()) ||
        ((rDuration == 0) && (qd <= rEndDateTime.date())) ||
        (rDuration == -1))) {
     // The date queried falls within the range of the event.
     if (secondFreq < 24*3600)
       return true;      // the event recurs at least once each day
     int after = mRecurStart.secsTo(QDateTime(qd));
     if (after / secondFreq != (after + 24*3600) / secondFreq)
       return true;
   }
   return false;
 }
 
 bool Recurrence::recursMinutelyAt(const QDateTime &dt, int minuteFreq) const
 {
   if ((dt >= mRecurStart) &&
       ((rDuration > 0) && (dt <= endDateTime()) ||
        ((rDuration == 0) && (dt <= rEndDateTime)) ||
        (rDuration == -1))) {
     // The time queried falls within the range of the event.
     if (((mRecurStart.secsTo(dt) / 60) % minuteFreq) == 0)
       return true;
   }
   return false;
 }
 
 bool Recurrence::recursDaily(const QDate &qd) const
 {
   QDate dStart = mRecurStart.date();
   if ((dStart.daysTo(qd) % rFreq) == 0) {
     // The date is a day which recurs
     if (qd >= dStart
     &&  ((rDuration > 0 && qd <= endDate()) ||
          (rDuration == 0 && qd <= rEndDateTime.date()) ||
          rDuration == -1)) {
       // The date queried falls within the range of the event.
       return true;
     }
   }
   return false;
 }
 
 bool Recurrence::recursWeekly(const QDate &qd) const
 {
   QDate dStart = mRecurStart.date();
   if ((dStart.daysTo(qd)/7) % rFreq == 0) {
     // The date is in a week which recurs
     if (qd >= dStart
     && ((rDuration > 0 && qd <= endDate()) ||
         (rDuration == 0 && qd <= rEndDateTime.date()) ||
         rDuration == -1)) {
       // The date queried falls within the range of the event.
       // check if the bits set match today.
       int i = qd.dayOfWeek()-1;
       if (rDays.testBit((uint) i))
         return true;
     }
   }
   return false;
 }
 
 bool Recurrence::recursMonthly(const QDate &qd) const
 {
   QDate dStart = mRecurStart.date();
   int year  = qd.year();
   int month = qd.month();
   int day   = qd.day();
   // calculate how many months ahead this date is from the original
   // event's date
   int monthsAhead = (year - dStart.year()) * 12 + (month - dStart.month());
   if ((monthsAhead % rFreq) == 0) {
     // The date is in a month which recurs
     if (qd >= dStart
     &&  ((rDuration > 0 && qd <= endDate()) ||
          (rDuration == 0 && qd <= rEndDateTime.date()) ||
          rDuration == -1)) {
       // The date queried falls within the range of the event.
       QValueList<int> days;
       int daysInMonth = qd.daysInMonth();
       if (recurs == rMonthlyDay)
         getMonthlyDayDays(days, daysInMonth);
       else if (recurs == rMonthlyPos)
         getMonthlyPosDays(days, daysInMonth, QDate(year, month, 1).dayOfWeek());
       for (QValueList<int>::Iterator it = days.begin();  it != days.end();  ++it) {
         if (*it == day)
           return true;
       }
       // no dates matched
     }
   }
   return false;
 }
 
 bool Recurrence::recursYearlyByMonth(const QDate &qd) const
 {
   QDate dStart = mRecurStart.date();
   int startDay = dStart.day();
   int qday     = qd.day();
   int qmonth   = qd.month();
   int qyear    = qd.year();
   bool match = (qday == startDay);
   if (!match && startDay == 29 && dStart.month() == 2) {
     // It's a recurrence on February 29th
     switch (mFeb29YearlyType) {
       case rFeb28:
         if (qday == 28 && qmonth == 2 && !QDate::leapYear(qyear))
           match = true;
         break;
       case rMar1:
         if (qday == 1 && qmonth == 3 && !QDate::leapYear(qyear)) {
           qmonth = 2;
           match = true;
         }
         break;
       case rFeb29:
         break;
     }
   }
 
   if (match) {
     // The day of the month matches. Calculate how many years ahead
     // this date is from the original event's date.
     int yearsAhead = (qyear - dStart.year());
     if (yearsAhead % rFreq == 0) {
       // The date is in a year which recurs
       if (qd >= dStart
       &&  ((rDuration > 0 && qd <= endDate()) ||
            (rDuration == 0 && qd <= rEndDateTime.date()) ||
            rDuration == -1)) {
         // The date queried falls within the range of the event.
         int i = qmonth;
         for (QPtrListIterator<int> qlin(rYearNums); qlin.current(); ++qlin) {
           if (i == *qlin.current())
             return true;
         }
       }
     }
   }
   return false;
 }
 
 bool Recurrence::recursYearlyByPos(const QDate &qd) const
 {
   QDate dStart = mRecurStart.date();
   int year  = qd.year();
   int month = qd.month();
   int day   = qd.day();
   // calculate how many years ahead this date is from the original
   // event's date
   int yearsAhead = (year - dStart.year());
   if (yearsAhead % rFreq == 0) {
     // The date is in a year which recurs
     if (qd >= dStart
     &&  ((rDuration > 0 && qd <= endDate()) ||
          (rDuration == 0 && qd <= rEndDateTime.date()) ||
          rDuration == -1)) {
       // The date queried falls within the range of the event.
       for (QPtrListIterator<int> qlin(rYearNums); qlin.current(); ++qlin) {
         if (month == *qlin.current()) {
           // The month recurs
           QValueList<int> days;
           getMonthlyPosDays(days, qd.daysInMonth(), QDate(year, month, 1).dayOfWeek());
           for (QValueList<int>::Iterator it = days.begin();  it != days.end();  ++it) {
             if (*it == day)
               return true;
           }
         }
       }
     }
   }
   return false;
 }
 
 bool Recurrence::recursYearlyByDay(const QDate &qd) const
 {
   QDate dStart = mRecurStart.date();
   // calculate how many years ahead this date is from the original
   // event's date
   int yearsAhead = (qd.year() - dStart.year());
   if (yearsAhead % rFreq == 0) {
     // The date is in a year which recurs
     if (qd >= dStart
     &&  ((rDuration > 0 && qd <= endDate()) ||
          (rDuration == 0 && qd <= rEndDateTime.date()) ||
          rDuration == -1)) {
       // The date queried falls within the range of the event.
       int i = qd.dayOfYear();
       for (QPtrListIterator<int> qlin(rYearNums); qlin.current(); ++qlin) {
         if (i == *qlin.current())
           return true;
       }
     }
   }
   return false;
 }
 
 /* Get the date of the next recurrence, after the specified date.
  * If 'last' is non-null, '*last' is set to true if the next recurrence is the
  * last recurrence, else false.
  * Reply = date of next recurrence, or invalid date if none.
  */
 QDate Recurrence::getNextDateNoTime(const QDate &preDate, bool *last) const
 {
     
   if (last)
     *last = false;
   QDate dStart = mRecurStart.date();
   if (preDate < dStart)
     return dStart;
   QDate earliestDate = preDate.addDays(1);
   QDate nextDate;
 
   switch (recurs) {
     case rDaily:
       nextDate = dStart.addDays((dStart.daysTo(preDate)/rFreq + 1) * rFreq);
       break;
 
     case rWeekly: {
       QDate start = dStart.addDays(1 - dStart.dayOfWeek());   // start of week for dStart
       int earliestDayOfWeek = earliestDate.dayOfWeek();
       int weeksAhead = start.daysTo(earliestDate) / 7;
       int notThisWeek = weeksAhead % rFreq;    // zero if this week is a recurring week
       weeksAhead -= notThisWeek;               // latest week which recurred
       int weekday = 0;
       // First check for any remaining day this week, if this week is a recurring week
       if (!notThisWeek)
         weekday = getFirstDayInWeek(earliestDayOfWeek);
       // Check for a day in the next scheduled week
       if (!weekday  &&  earliestDayOfWeek > 1)
         weekday = getFirstDayInWeek(rWeekStart) + rFreq*7;
       if (weekday)
         nextDate = start.addDays(weeksAhead*7 + weekday - 1);
       break;
     }
     case rMonthlyDay:
     case rMonthlyPos: {
       int startYear  = dStart.year();
       int startMonth = dStart.month();     // 1..12
       int earliestYear = earliestDate.year();
       int monthsAhead = (earliestYear - startYear)*12 + earliestDate.month() - startMonth;
       int notThisMonth = monthsAhead % rFreq;    // zero if this month is a recurring month
       monthsAhead -= notThisMonth;               // latest month which recurred
       // Check for the first later day in the current month
       if (!notThisMonth)
         nextDate = getFirstDateInMonth(earliestDate);
       if (!nextDate.isValid()  &&  earliestDate.day() > 1) {
         // Check for a day in the next scheduled month
         int months = startMonth - 1 + monthsAhead + rFreq;
         nextDate = getFirstDateInMonth(QDate(startYear + months/12, months%12 + 1, 1));
       }
       break;
     }
     case rYearlyMonth:
     case rYearlyPos:
     case rYearlyDay: {
       int startYear  = dStart.year();
       int yearsAhead = earliestDate.year() - startYear;
       int notThisYear = yearsAhead % rFreq;   // zero if this year is a recurring year
       yearsAhead -= notThisYear;              // latest year which recurred
       // Check for the first later date in the current year
       if (!notThisYear)
         nextDate = getFirstDateInYear(earliestDate);
       // Check for a date in the next scheduled year
       if (!nextDate.isValid()  &&  earliestDate.dayOfYear() > 1)
         nextDate = getFirstDateInYear(QDate(startYear + yearsAhead + rFreq, 1, 1));
       break;
     }
     case rNone:
     default:
       return QDate();
   }
 
   if (rDuration >= 0 && nextDate.isValid()) {
     // Check that the date found is within the range of the recurrence
     QDate end = endDate();
     if (nextDate > end)
       return QDate();
     if (last  &&  nextDate == end)
       *last = true;
   }
   return nextDate;
 }
 
 /* Get the date of the last previous recurrence, before the specified date.
  * Reply = date of previous recurrence, or invalid date if none.
  */
 QDate Recurrence::getPreviousDateNoTime(const QDate &afterDate, bool *last) const
 {
   if (last)
     *last = false;
   QDate dStart = mRecurStart.date();
   QDate latestDate = afterDate.addDays(-1);
   if (latestDate < dStart)
     return QDate();
   QDate prevDate;
 
   switch (recurs) {
     case rDaily:
       prevDate = dStart.addDays((dStart.daysTo(latestDate) / rFreq) * rFreq);
       break;
 
     case rWeekly: {
       QDate start = dStart.addDays(1 - dStart.dayOfWeek());   // start of week for dStart
       int latestDayOfWeek = latestDate.dayOfWeek();
       int weeksAhead = start.daysTo(latestDate) / 7;
       int notThisWeek = weeksAhead % rFreq;    // zero if this week is a recurring week
       weeksAhead -= notThisWeek;               // latest week which recurred
       int weekday = 0;
       // First check for any previous day this week, if this week is a recurring week
       if (!notThisWeek)
         weekday = getLastDayInWeek(latestDayOfWeek);
       // Check for a day in the previous scheduled week
       if (!weekday) {
         int weekEnd = (rWeekStart + 5)%7 + 1;
         if (latestDayOfWeek < weekEnd) {
           if (!notThisWeek)
             weeksAhead -= rFreq;
           weekday = getLastDayInWeek(weekEnd);
         }
       }
       if (weekday)
         prevDate = start.addDays(weeksAhead*7 + weekday - 1);
       break;
     }
     case rMonthlyDay:
     case rMonthlyPos: {
       int startYear  = dStart.year();
       int startMonth = dStart.month();     // 1..12
       int latestYear = latestDate.year();
       int monthsAhead = (latestYear - startYear)*12 + latestDate.month() - startMonth;
       int notThisMonth = monthsAhead % rFreq;    // zero if this month is a recurring month
       monthsAhead -= notThisMonth;               // latest month which recurred
       // Check for the last earlier day in the current month
       if (!notThisMonth)
         prevDate = getLastDateInMonth(latestDate);
       if (!prevDate.isValid()  &&  latestDate.day() < latestDate.daysInMonth()) {
         // Check for a day in the previous scheduled month
         if (!notThisMonth)
           monthsAhead -= rFreq;
         int months = startMonth + monthsAhead;   // get the month after the one that recurs
         prevDate = getLastDateInMonth(QDate(startYear + months/12, months%12 + 1, 1).addDays(-1));
       }
       break;
     }
     case rYearlyMonth:
     case rYearlyPos:
     case rYearlyDay: {
       int startYear  = dStart.year();
       int yearsAhead = latestDate.year() - startYear;
       int notThisYear = yearsAhead % rFreq;   // zero if this year is a recurring year
       yearsAhead -= notThisYear;              // latest year which recurred
       // Check for the first later date in the current year
       if (!notThisYear)
         prevDate = getLastDateInYear(latestDate);
       if (!prevDate.isValid()  &&  latestDate.dayOfYear() < latestDate.daysInYear()) {
         // Check for a date in the next scheduled year
         if (!notThisYear)
           yearsAhead -= rFreq;
         prevDate = getLastDateInYear(QDate(startYear + yearsAhead, 12, 31));
       }
       break;
     }
     case rNone:
     default:
       return QDate();
   }
 
   if (prevDate.isValid()) {
     // Check that the date found is within the range of the recurrence
     if (prevDate < dStart)
       return QDate();
     if (rDuration >= 0) {
       QDate end = endDate();
       if (prevDate >= end) {
         if (last)
           *last = true;
         return end;
       }
     }
   }
   return prevDate;
 }
 
 void Recurrence::setDailySub(short type, int freq, int duration)
 {
   recurs = type;
   rFreq = freq;
   rDuration = duration;
   rMonthPositions.clear();
   rMonthDays.clear();
   rYearNums.clear();
   if (type != rDaily)
     mFloats = false;     // sub-daily types can't be floating
 
   if (mParent) mParent->updated();
 }
 
 void Recurrence::setYearly_(short type, Feb29Type feb29type, int freq, int duration)
 {
   recurs = type;
   if (mCompatVersion < 310 && type == rYearlyDay) {
     mCompatRecurs = rYearlyDay;
     recurs = rYearlyMonth;      // convert old yearly-by-day to yearly-by-month
     feb29type = rMar1;          // retain the same day number in the year
   }
 
   mFeb29YearlyType = feb29type;
   rFreq = freq;
   rDuration = duration;
   if (type != rYearlyPos)
     rMonthPositions.clear();
   rMonthDays.clear();
   if (mParent) mParent->updated();
 }
 
 int Recurrence::recurCalc(PeriodFunc func, QDateTime &endtime) const
 {
   QDate enddate = endtime.date();
   switch (func) {
     case END_DATE_AND_COUNT:
       if (rDuration < 0) {
         endtime = QDateTime();
         return 0;    // infinite recurrence
       }
       if (rDuration == 0) {
         endtime = rEndDateTime;
         func = COUNT_TO_DATE;
       }
       break;
     case COUNT_TO_DATE:
       // Count recurrences up to and including the specified date/time.
       if (endtime < mRecurStart)
         return 0;
       if (rDuration == 0 && endtime > rEndDateTime)
         enddate = rEndDateTime.date();
       else if (!mFloats && mRecurStart.time() > endtime.time())
         enddate = enddate.addDays(-1);
       break;
     case NEXT_AFTER_DATE:
       // Find next recurrence AFTER endtime
       if (endtime < mRecurStart) {
         endtime = mRecurStart;
         return 1;
       }
       if (rDuration == 0 && endtime >= rEndDateTime) {
         endtime = QDateTime();
         return 0;
       }
       if (!mFloats && mRecurStart.time() > endtime.time())
         enddate = enddate.addDays(-1);
       break;
     default:
       endtime = QDateTime();
       return 0;
   }
 
   int count = 0;     // default = error
   bool timed = false;
   switch (recurs) {
     case rMinutely:
       timed = true;
       count = secondlyCalc(func, endtime, rFreq*60);
       break;
     case rHourly:
       timed = true;
       count = secondlyCalc(func, endtime, rFreq*3600);
       break;
     case rDaily:
       count = dailyCalc(func, enddate);
       break;
     case rWeekly:
       count = weeklyCalc(func, enddate);
       break;
     case rMonthlyPos:
     case rMonthlyDay:
       count = monthlyCalc(func, enddate);
       break;
     case rYearlyMonth:
       count = yearlyMonthCalc(func, enddate);
       break;
     case rYearlyPos:
       count = yearlyPosCalc(func, enddate);
       break;
     case rYearlyDay:
       count = yearlyDayCalc(func, enddate);
       break;
     default:
       break;
   }
 
   switch (func) {
     case END_DATE_AND_COUNT:
     case NEXT_AFTER_DATE:
       if (count == 0)
         endtime = QDateTime();
       else if (!timed) {
         endtime.setDate(enddate);
         endtime.setTime(mRecurStart.time());
       }
       break;
     case COUNT_TO_DATE:
       break;
   }
   return count;
 }
 
 int Recurrence::recurCalc(PeriodFunc func, QDate &enddate) const
 {
   QDateTime endtime(enddate, QTime(23,59,59));
   switch (func) {
     case END_DATE_AND_COUNT:
       if (rDuration < 0) {
         enddate = QDate();
         return 0;    // infinite recurrence
       }
       if (rDuration == 0) {
         enddate = rEndDateTime.date();
         func = COUNT_TO_DATE;
       }
       break;
     case COUNT_TO_DATE:
       // Count recurrences up to and including the specified date.
       if (enddate < mRecurStart.date())
         return 0;
       if (rDuration == 0 && enddate > rEndDateTime.date()) {
         enddate = rEndDateTime.date();
         endtime.setDate(enddate);
       }
       break;
     case NEXT_AFTER_DATE:
       if (enddate < mRecurStart.date()) {
         enddate = mRecurStart.date();
         return 1;
       }
       if (rDuration == 0 && enddate >= rEndDateTime.date()) {
         enddate = QDate();
         return 0;
       }
       break;
     default:
       enddate = QDate();
       return 0;
   }
 
   int count = 0;     // default = error
   bool timed = false;
   switch (recurs) {
     case rMinutely:
       timed = true;
       count = secondlyCalc(func, endtime, rFreq*60);
       break;
     case rHourly:
       timed = true;
       count = secondlyCalc(func, endtime, rFreq*3600);
       break;
     case rDaily:
       count = dailyCalc(func, enddate);
       break;
     case rWeekly:
       count = weeklyCalc(func, enddate);
       break;
     case rMonthlyPos:
     case rMonthlyDay:
       count = monthlyCalc(func, enddate);
       break;
     case rYearlyMonth:
       count = yearlyMonthCalc(func, enddate);
       break;
     case rYearlyPos:
       count = yearlyPosCalc(func, enddate);
       break;
     case rYearlyDay:
       count = yearlyDayCalc(func, enddate);
       break;
     default:
       break;
   }
 
   switch (func) {
     case END_DATE_AND_COUNT:
     case NEXT_AFTER_DATE:
       if (count == 0)
         endtime = QDate();
       else if (timed)
         enddate = endtime.date();
       break;
     case COUNT_TO_DATE:
       break;
   }
   return count;
 }
 
 /* Find count and, depending on 'func', the end date/time of a secondly recurrence.
  * Reply = total number of occurrences up to 'endtime', or 0 if error.
  * If 'func' = END_DATE_AND_COUNT or NEXT_AFTER_DATE, 'endtime' is updated to the
  * recurrence end date/time.
  */
 int Recurrence::secondlyCalc(PeriodFunc func, QDateTime &endtime, int freq) const
 {
   switch (func) {
     case END_DATE_AND_COUNT:
       endtime = mRecurStart.addSecs((rDuration + mRecurExDatesCount - 1) * freq);
       return rDuration + mRecurExDatesCount;
     case COUNT_TO_DATE: {
       int n = mRecurStart.secsTo(endtime)/freq + 1;
       if (rDuration > 0 && n > rDuration + mRecurExDatesCount)
         return rDuration + mRecurExDatesCount;
       return n;
     }
     case NEXT_AFTER_DATE: {
       int count = mRecurStart.secsTo(endtime) / freq + 2;
       if (rDuration > 0 && count > rDuration)
         return 0;
       endtime = mRecurStart.addSecs((count - 1)*freq);
       return count;
     }
   }
   return 0;
 }
 
 /* Find count and, depending on 'func', the end date of a daily recurrence.
  * Reply = total number of occurrences up to 'enddate', or 0 if error.
  * If 'func' = END_DATE_AND_COUNT or NEXT_AFTER_DATE, 'enddate' is updated to the
  * recurrence end date.
  */
 int Recurrence::dailyCalc(PeriodFunc func, QDate &enddate) const
 {
   QDate dStart = mRecurStart.date();
   switch (func) {
     case END_DATE_AND_COUNT:
       enddate = dStart.addDays((rDuration + mRecurExDatesCount - 1) * rFreq);
       return rDuration + mRecurExDatesCount;
     case COUNT_TO_DATE: {
       int n = dStart.daysTo(enddate)/rFreq + 1;
       if (rDuration > 0 && n > rDuration + mRecurExDatesCount)
         return rDuration + mRecurExDatesCount;
       return n;
     }
     case NEXT_AFTER_DATE: {
       int count = dStart.daysTo(enddate) / rFreq + 2;
       if (rDuration > 0 && count > rDuration)
         return 0;
       enddate = dStart.addDays((count - 1)*rFreq);
       return count;
     }
   }
   return 0;
 }
 
 /* Find count and, depending on 'func', the end date of a weekly recurrence.
  * Reply = total number of occurrences up to 'enddate', or 0 if error.
  * If 'func' = END_DATE_AND_COUNT or NEXT_AFTER_DATE, 'enddate' is updated to the
  * recurrence end date.
  */
 int Recurrence::weeklyCalc(PeriodFunc func, QDate &enddate) const
 {
   int daysPerWeek = 0;
   for (int i = 0;  i < 7;  ++i) {
     if (rDays.testBit((uint)i))
       ++daysPerWeek;
   }
   if (!daysPerWeek)
     return 0;     // there are no days to recur on
 
   switch (func) {
     case END_DATE_AND_COUNT:
       return weeklyCalcEndDate(enddate, daysPerWeek);
     case COUNT_TO_DATE:
       return weeklyCalcToDate(enddate, daysPerWeek);
     case NEXT_AFTER_DATE:
       return weeklyCalcNextAfter(enddate, daysPerWeek);
   }
   return 0;
 }
 
 int Recurrence::weeklyCalcEndDate(QDate &enddate, int daysPerWeek) const
 {
   int startDayOfWeek = mRecurStart.date().dayOfWeek();     // 1..7
   int countGone = 0;
   int daysGone = 0;
   uint countTogo = rDuration + mRecurExDatesCount;
   if (startDayOfWeek != rWeekStart) {
     // Check what remains of the start week
     for (int i = startDayOfWeek - 1;  i != rWeekStart - 1;  i = (i + 1) % 7) {
           ++daysGone;
       if (rDays.testBit((uint)i)) {
         ++countGone;
         if (--countTogo == 0)
           break;
       }
     }
     daysGone += 7 * (rFreq - 1);
   }
   if (countTogo) {
     // Skip the remaining whole weeks
     // Leave at least 1 recurrence remaining, in order to get its date
     int wholeWeeks = (countTogo - 1) / daysPerWeek;
     daysGone += wholeWeeks * 7 * rFreq;
     countGone += wholeWeeks * daysPerWeek;
     countTogo -= wholeWeeks * daysPerWeek;
     // Check the last week in the recurrence
     for (int i = rWeekStart - 1;  ;  i = (i + 1) % 7) {
           ++daysGone;
       if (rDays.testBit((uint)i)) {
         ++countGone;
         if (--countTogo == 0) 
           break;
       }
     }
   }
   enddate = mRecurStart.date().addDays(daysGone);
   return countGone;
 }
 
 int Recurrence::weeklyCalcToDate(const QDate &enddate, int daysPerWeek) const
 {
   QDate dStart = mRecurStart.date();
   int startDayOfWeek = dStart.dayOfWeek();     // 1..7
   int countGone = 0;
   int daysGone  = 0;
   int totalDays = dStart.daysTo(enddate) + 1;
   int countMax  = (rDuration > 0) ? rDuration + mRecurExDatesCount : INT_MAX;
 
   if (startDayOfWeek != rWeekStart) {
     // Check what remains of the start week
     for (int i = startDayOfWeek - 1;  i != rWeekStart - 1;  i = (i + 1) % 7) {
       if (rDays.testBit((uint)i)) {
         if (++countGone >= countMax)
           return countMax;
       }
       if (++daysGone == totalDays)
         return countGone;
     }
     daysGone += 7 * (rFreq - 1);
     if (daysGone >= totalDays)
       return countGone;
   }
   // Skip the remaining whole weeks
   int wholeWeeks = (totalDays - daysGone) / 7;
   countGone += (wholeWeeks / rFreq) * daysPerWeek;
   if (countGone >= countMax)
     return countMax;
   daysGone += wholeWeeks * 7;
   if (daysGone >= totalDays     // have we reached the end date?
   ||  wholeWeeks % rFreq)       // is end week a recurrence week?
     return countGone;
 
   // Check the last week in the recurrence
   for (int i = rWeekStart - 1;  ;  i = (i + 1) % 7) {
     if (rDays.testBit((uint)i)) {
       if (++countGone >= countMax)
         return countMax;
     }
     if (++daysGone == totalDays)
       return countGone;
   }
   return countGone;
 }
 
 int Recurrence::weeklyCalcNextAfter(QDate &enddate, int daysPerWeek) const
 {
   QDate dStart = mRecurStart.date();
   int  startDayOfWeek = dStart.dayOfWeek();     // 1..7
   int  totalDays = dStart.daysTo(enddate) + 1;
   uint countTogo = (rDuration > 0) ? rDuration + mRecurExDatesCount : UINT_MAX;
   int  countGone = 0;
   int  daysGone = 0;
   int recurWeeks;
 
   if (startDayOfWeek != rWeekStart) {
     // Check what remains of the start week
     for (int i = startDayOfWeek - 1;  i != rWeekStart - 1;  i = (i + 1) % 7) {
       ++daysGone;
       if (rDays.testBit((uint)i)) {
         ++countGone;
         if (daysGone > totalDays)
           goto ex;
         if (--countTogo == 0)
           return 0;
       }
     }
     daysGone += 7 * (rFreq - 1);
   }
 
   // Skip the remaining whole weeks
   recurWeeks = (totalDays - daysGone) / (7 * rFreq);
   if (recurWeeks) {
     int n = recurWeeks * daysPerWeek;
     if (static_cast<uint>(n) > countTogo)
         return 0;     // reached end of recurrence
     countGone += n;
     countTogo -= n;
    daysGone += recurWeeks * 7 * rFreq;
   }
 
   // Check the last week or two in the recurrence
   for ( ; ; ) {
     for (int i = rWeekStart - 1;  ;  i = (i + 1) % 7) {
       ++daysGone;
       if (rDays.testBit((uint)i)) {
         ++countGone;
         if (daysGone > totalDays)
           goto ex;
         if (--countTogo == 0)
           return 0;
       }
     }
     daysGone += 7 * (rFreq - 1);
   }
 ex:
   enddate = dStart.addDays(daysGone);
   return countGone;
 }
 
 /* Find count and, depending on 'func', the end date of a monthly recurrence.
  * Reply = total number of occurrences up to 'enddate', or 0 if error.
  * If 'func' = END_DATE_AND_COUNT or NEXT_AFTER_DATE, 'enddate' is updated to the
  * recurrence end date.
  */
 struct Recurrence::MonthlyData {
     const Recurrence *recurrence;
     int               year;          // current year
     int               month;         // current month 0..11
     int               day;           // current day of month 1..31
     bool              varies;        // true if recurring days vary between different months
   private:
     QValueList<int>   days28, days29, days30, days31;   // recurring days in months of each length
     QValueList<int>  *recurDays[4];
   public:
     MonthlyData(const Recurrence* r, const QDate &date)
              : recurrence(r), year(date.year()), month(date.month()-1), day(date.day())
              { recurDays[0] = &days28;
                recurDays[1] = &days29;
                recurDays[2] = &days30;
                recurDays[3] = &days31;
                varies = (recurrence->recurs == rMonthlyPos)
                         ? true : recurrence->getMonthlyDayDays(days31, 31);
              }
     const QValueList<int>* dayList() const {
             if (!varies)
               return &days31;
             QDate startOfMonth(year, month + 1, 1);
             int daysInMonth = startOfMonth.daysInMonth();
             QValueList<int>* days = recurDays[daysInMonth - 28];
             if (recurrence->recurs == rMonthlyPos)
               recurrence->getMonthlyPosDays(*days, daysInMonth, startOfMonth.dayOfWeek());
             else if (days->isEmpty())
               recurrence->getMonthlyDayDays(*days, daysInMonth);
             return days;
     }
     int    yearMonth() const    { return year*12 + month; }
     void   addMonths(int diff)  { month += diff;  year += month / 12;  month %= 12; }
     QDate  date() const         { return QDate(year, month + 1, day); }
 };
 
 int Recurrence::monthlyCalc(PeriodFunc func, QDate &enddate) const
 {
   if (recurs == rMonthlyPos && rMonthPositions.isEmpty()
   ||  recurs == rMonthlyDay && rMonthDays.isEmpty())
     return 0;
 
   MonthlyData data(this, mRecurStart.date());
   switch (func) {
     case END_DATE_AND_COUNT:
       return monthlyCalcEndDate(enddate, data);
     case COUNT_TO_DATE:
       return monthlyCalcToDate(enddate, data);
     case NEXT_AFTER_DATE:
       return monthlyCalcNextAfter(enddate, data);
   }
   return 0;
 }
 
 int Recurrence::monthlyCalcEndDate(QDate &enddate, MonthlyData &data) const
 {
   uint countTogo = rDuration + mRecurExDatesCount;
   int  countGone = 0;
   QValueList<int>::ConstIterator it;
   const QValueList<int>* days = data.dayList();
 
   if (data.day > 1) {
     // Check what remains of the start month
     for (it = days->begin();  it != days->end();  ++it) {
       if (*it >= data.day) {
         ++countGone;
         if (--countTogo == 0) {
           data.day = *it;
           break;
         }
       }
     }
     if (countTogo) {
       data.day = 1;
       data.addMonths(rFreq);
     }
   }
   if (countTogo) {
     if (data.varies) {
       // The number of recurrence days varies from month to month,
       // so we need to check month by month.
       for ( ; ; ) {
         days = data.dayList();
         uint n = days->count();    // number of recurrence days in this month
         if (n >= countTogo)
           break;
         countTogo -= n;
         countGone += n;
         data.addMonths(rFreq);
       }
     } else {
       // The number of recurrences is the same every month,
       // so skip the month-by-month check.
       // Skip the remaining whole months, but leave at least
       // 1 recurrence remaining, in order to get its date.
       int daysPerMonth = days->count();
       int wholeMonths = (countTogo - 1) / daysPerMonth;
       data.addMonths(wholeMonths * rFreq);
       countGone += wholeMonths * daysPerMonth;
       countTogo -= wholeMonths * daysPerMonth;
     }
     if (countTogo) {
       // Check the last month in the recurrence
       for (it = days->begin();  it != days->end();  ++it) {
         ++countGone;
         if (--countTogo == 0) {
           data.day = *it;
           break;
         }
       }
     }
   }
   enddate = data.date();
   return countGone;
 }
 
 int Recurrence::monthlyCalcToDate(const QDate &enddate, MonthlyData &data) const
 {
   int countGone = 0;
   int countMax  = (rDuration > 0) ? rDuration + mRecurExDatesCount : INT_MAX;
   int endYear  = enddate.year();
   int endMonth = enddate.month() - 1;     // zero-based
   int endDay   = enddate.day();
   int endYearMonth = endYear*12 + endMonth;
   QValueList<int>::ConstIterator it;
   const QValueList<int>* days = data.dayList();
 
   if (data.day > 1) {
     // Check what remains of the start month
     for (it = days->begin();  it != days->end();  ++it) {
       if (*it >= data.day) {
         if (data.yearMonth() == endYearMonth && *it > endDay)
           return countGone;
         if (++countGone >= countMax)
           return countMax;
       }
     }
     data.day = 1;
     data.addMonths(rFreq);
   }
 
   if (data.varies) {
     // The number of recurrence days varies from month to month,
     // so we need to check month by month.
     while (data.yearMonth() < endYearMonth) {
       countGone += data.dayList()->count();
       if (countGone >= countMax)
         return countMax;
       data.addMonths(rFreq);
     }
     days = data.dayList();
   } else {
     // The number of recurrences is the same every month,
     // so skip the month-by-month check.
     // Skip the remaining whole months.
     int daysPerMonth = days->count();
     int wholeMonths = endYearMonth - data.yearMonth();
     countGone += (wholeMonths / rFreq) * daysPerMonth;
     if (countGone >= countMax)
       return countMax;
     if (wholeMonths % rFreq)
       return countGone;      // end year isn't a recurrence year
     data.year  = endYear;
     data.month = endMonth;
   }
 
   // Check the last month in the recurrence
   for (it = days->begin();  it != days->end();  ++it) {
     if (*it > endDay)
       return countGone;
     if (++countGone >= countMax)
       return countMax;
   }
   return countGone;
 }
 
 int Recurrence::monthlyCalcNextAfter(QDate &enddate, MonthlyData &data) const
 {
   uint countTogo = (rDuration > 0) ? rDuration + mRecurExDatesCount : UINT_MAX;
   int countGone = 0;
   int endYear = enddate.year();
   int endDay  = enddate.day();
   int endYearMonth = endYear*12 + enddate.month() - 1;
   QValueList<int>::ConstIterator it;
   const QValueList<int>* days = data.dayList();
 
   if (data.day > 1) {
     // Check what remains of the start month
     for (it = days->begin();  it != days->end();  ++it) {
       if (*it >= data.day) {
         ++countGone;
         if (data.yearMonth() == endYearMonth && *it > endDay) {
           data.day = *it;
           goto ex;
         }
         if (--countTogo == 0)
           return 0;
       }
     }
     data.day = 1;
     data.addMonths(rFreq);
   }
 
   if (data.varies) {
     // The number of recurrence days varies from month to month,
     // so we need to check month by month.
     while (data.yearMonth() <= endYearMonth) {
       days = data.dayList();
       uint n = days->count();    // number of recurrence days in this month
       if (data.yearMonth() == endYearMonth && days->last() > endDay)
         break;
       if (n >= countTogo)
         return 0;
       countGone += n;
       countTogo -= n;
       data.addMonths(rFreq);
     }
     days = data.dayList();
   } else {
     // The number of recurrences is the same every month,
     // so skip the month-by-month check.
     // Skip the remaining whole months to at least end year/month.
     int daysPerMonth = days->count();
     int elapsed = endYearMonth - data.yearMonth();
     int recurMonths = (elapsed + rFreq - 1) / rFreq;
     if (elapsed % rFreq == 0  &&  days->last() <= endDay)
       ++recurMonths;    // required month is after endYearMonth
     if (recurMonths) {
       int n = recurMonths * daysPerMonth;
       if (static_cast<uint>(n) > countTogo)
         return 0;     // reached end of recurrence
       countTogo -= n;
       countGone += n;
       data.addMonths(recurMonths * rFreq);
     }
   }
 
   // Check the last month in the recurrence
   for (it = days->begin();  it != days->end();  ++it) {
     ++countGone;
     if (data.yearMonth() > endYearMonth  ||  *it > endDay) {
       data.day = *it;
       break;
     }
     if (--countTogo == 0)
       return 0;
   }
 ex:
   enddate = data.date();
   return countGone;
 }
 
 
 /* Find count and, depending on 'func', the end date of an annual recurrence by date.
  * Reply = total number of occurrences up to 'enddate', or 0 if error.
  * If 'func' = END_DATE_AND_COUNT or NEXT_AFTER_DATE, 'enddate' is updated to the
  * recurrence end date.
  */
 struct Recurrence::YearlyMonthData {
     const Recurrence *recurrence;
     int               year;          // current year
     int               month;         // current month 1..12
     int               day;           // current day of month 1..31
     bool              leapyear;      // true if February 29th recurs and current year is a leap year
     bool              feb29;         // true if February 29th recurs
   private:
     QValueList<int>   months;        // recurring months in non-leap years  1..12
     QValueList<int>   leapMonths;    // recurring months in leap years  1..12
   public:
     YearlyMonthData(const Recurrence* r, const QDate &date)
           : recurrence(r), year(date.year()), month(date.month()), day(date.day())
           { feb29 = recurrence->getYearlyMonthMonths(day, months, leapMonths);
             leapyear = feb29 && QDate::leapYear(year);
           }
     const QValueList<int>* monthList() const
                          { return leapyear ? &leapMonths : &months; }
     const QValueList<int>* leapMonthList() const  { return &leapMonths; }
     QDate            date() const  { return QDate(year, month, day); }
 };
 
 int Recurrence::yearlyMonthCalc(PeriodFunc func, QDate &enddate) const
 {
   if (rYearNums.isEmpty())
     return 0;
   YearlyMonthData data(this, mRecurStart.date());
   switch (func) {
     case END_DATE_AND_COUNT:
       return yearlyMonthCalcEndDate(enddate, data);
     case COUNT_TO_DATE:
       return yearlyMonthCalcToDate(enddate, data);
     case NEXT_AFTER_DATE:
       return yearlyMonthCalcNextAfter(enddate, data);
   }
   return 0;
 }
 
 // Find total count and end date of an annual recurrence by date.
 // Reply = total number of occurrences.
 int Recurrence::yearlyMonthCalcEndDate(QDate &enddate, YearlyMonthData &data) const
 {
   uint countTogo = rDuration + mRecurExDatesCount;
   int  countGone = 0;
   QValueList<int>::ConstIterator it;
   const QValueList<int>* mons = data.monthList();   // get recurring months for this year
 
   if (data.month > 1) {
     // Check what remains of the start year
     for (it = mons->begin();  it != mons->end();  ++it) {
       if (*it >= data.month) {
         ++countGone;
         if (--countTogo == 0) {
           data.month = *it;
           if (data.month == 2 && data.feb29 && !data.leapyear) {
             // The recurrence should end on February 29th, but it's a non-leap year
             switch (mFeb29YearlyType) {
               case rFeb28:
                 data.day = 28;
                 break;
               case rMar1:
                 data.month = 3;
                 data.day   = 1;
                 break;
               case rFeb29:
                 break;
             }
           }
           break;
         }
       }
     }
     if (countTogo) {
       data.month = 1;
       data.year += rFreq;
     }
   }
   if (countTogo) {
     if (data.feb29 && mFeb29YearlyType == rFeb29) {
       // The number of recurrences is different on leap years,
       // so check year-by-year.
       for ( ; ; ) {
         mons = data.monthList();
         uint n = mons->count();
         if (n >= countTogo)
           break;
         countTogo -= n;
         countGone += n;
         data.year += rFreq;
       }
     } else {
       // The number of recurrences is the same every year,
       // so skip the year-by-year check.
       // Skip the remaining whole years, but leave at least
       // 1 recurrence remaining, in order to get its date.
       int monthsPerYear = mons->count();
       int wholeYears = (countTogo - 1) / monthsPerYear;
       data.year += wholeYears * rFreq;
       countGone += wholeYears * monthsPerYear;
       countTogo -= wholeYears * monthsPerYear;
     }
     if (countTogo) {
       // Check the last year in the recurrence
       for (it = mons->begin();  it != mons->end();  ++it) {
         ++countGone;
         if (--countTogo == 0) {
           data.month = *it;
           if (data.month == 2 && data.feb29 && !QDate::leapYear(data.year)) {
             // The recurrence should end on February 29th, but it's a non-leap year
             switch (mFeb29YearlyType) {
               case rFeb28:
                 data.day = 28;
                 break;
               case rMar1:
                 data.month = 3;
                 data.day   = 1;
                 break;
               case rFeb29:
                 break;
             }
           }
           break;
         }
       }
     }
   }
   enddate = data.date();
   return countGone;
 }
 
 // Find count of an annual recurrence by date.
 // Reply = total number of occurrences up to 'enddate'.
 int Recurrence::yearlyMonthCalcToDate(const QDate &enddate, YearlyMonthData &data) const
 {
   int countGone = 0;
   int countMax  = (rDuration > 0) ? rDuration + mRecurExDatesCount : INT_MAX;
   int endYear  = enddate.year();
   int endMonth = enddate.month();
   int endDay   = enddate.day();
   if (endDay < data.day) {
     /* The end day of the month is earlier than the recurrence day of the month.
      * If Feb 29th recurs and:
      * 1) it recurs on Feb 28th in non-leap years, don't adjust the end month
      *    if enddate is Feb 28th on a non-leap year.
      * 2) it recurs on Mar 1st in non-leap years, allow the end month to be
      *    adjusted to February, to simplify calculations.
      */
     if (data.feb29  &&  !QDate::leapYear(endYear)
     &&  mFeb29YearlyType == rFeb28  &&  endDay == 28  &&  endMonth == 2) {
     }
     else if (--endMonth == 0) {
       endMonth = 12;
       --endYear;
     }
   }
   QValueList<int>::ConstIterator it;
   const QValueList<int>* mons = data.monthList();
 
   if (data.month > 1) {
     // Check what remains of the start year
     for (it = mons->begin();  it != mons->end();  ++it) {
       if (*it >= data.month) {
         if (data.year == endYear && *it > endMonth)
           return countGone;
         if (++countGone >= countMax)
           return countMax;
       }
     }
     data.month = 1;
     data.year += rFreq;
   }
   if (data.feb29 && mFeb29YearlyType == rFeb29) {
     // The number of recurrences is different on leap years,
     // so check year-by-year.
     while (data.year < endYear) {
       countGone += data.monthList()->count();
       if (countGone >= countMax)
         return countMax;
       data.year += rFreq;
     }
     mons = data.monthList();
   } else {
     // The number of recurrences is the same every year,
     // so skip the year-by-year check.
     // Skip the remaining whole years.
     int monthsPerYear = mons->count();
     int wholeYears = endYear - data.year;
     countGone += (wholeYears / rFreq) * monthsPerYear;
     if (countGone >= countMax)
       return countMax;
     if (wholeYears % rFreq)
       return countGone;      // end year isn't a recurrence year
     data.year = endYear;
   }
 
   // Check the last year in the recurrence
   for (it = mons->begin();  it != mons->end();  ++it) {
     if (*it > endMonth)
       return countGone;
     if (++countGone >= countMax)
       return countMax;
   }
   return countGone;
 }
 
 // Find count and date of first recurrence after 'enddate' of an annual recurrence by date.
 // Reply = total number of occurrences up to 'enddate'.
 int Recurrence::yearlyMonthCalcNextAfter(QDate &enddate, YearlyMonthData &data) const
 {
   uint countTogo = (rDuration > 0) ? rDuration + mRecurExDatesCount : UINT_MAX;
   int  countGone = 0;
   int endYear  = enddate.year();
   int endMonth = enddate.month();
   int endDay   = enddate.day();
   bool mar1TooEarly = false;
   bool feb28ok      = false;
   if (endDay < data.day) {
     if (data.feb29 && mFeb29YearlyType == rMar1 && endMonth == 3)
       mar1TooEarly = true;
     if (data.feb29 && mFeb29YearlyType == rFeb28 && endMonth == 2 && endDay == 28)
       feb28ok = true;
     else if (--endMonth == 0) {
       endMonth = 12;
       --endYear;
     }
   }
   QValueList<int>::ConstIterator it;
   const QValueList<int>* mons = data.monthList();
 
   if (data.month > 1) {
     // Check what remains of the start year
     for (it = mons->begin();  it != mons->end();  ++it) {
       if (*it >= data.month) {
         ++countGone;
         if (data.year == endYear
         &&  (   *it > endMonth && (*it > 3 || !mar1TooEarly)
              || *it == 2 && feb28ok && data.leapyear)) {
           if (*it == 2 && data.feb29 && !data.leapyear) {
             // The next recurrence should be on February 29th, but it's a non-leap year
             switch (mFeb29YearlyType) {
               case rFeb28:
                 data.month = 2;
                 data.day   = 28;
                 break;
               case rMar1:
                 data.month = 3;
                 data.day   = 1;
                 break;
               case rFeb29:   // impossible in this context!
                 break;
             }
           }
           else
             data.month = *it;
           goto ex;
         }
         if (--countTogo == 0)
           return 0;
       }
     }
     data.month = 1;
     data.year += rFreq;
   }
 
   if (data.feb29 && mFeb29YearlyType == rFeb29) {
     // The number of recurrences is different on leap years,
     // so check year-by-year.
     while (data.year <= endYear) {
       mons = data.monthList();
       if (data.year == endYear && mons->last() > endMonth)
         break;
       uint n = mons->count();
       if (n >= countTogo)
         break;
       countTogo -= n;
       countGone += n;
       data.year += rFreq;
     }
     mons = data.monthList();
   } else {
     // The number of recurrences is the same every year,
     // so skip the year-by-year check.
     // Skip the remaining whole years to at least endYear.
     int monthsPerYear = mons->count();
     int recurYears = (endYear - data.year + rFreq - 1) / rFreq;
     if ((endYear - data.year)%rFreq == 0
     &&  mons->last() <= endMonth)
       ++recurYears;    // required year is after endYear
     if (recurYears) {
       int n = recurYears * monthsPerYear;
       if (static_cast<uint>(n) > countTogo)
         return 0;     // reached end of recurrence
       countTogo -= n;
       countGone += n;
       data.year += recurYears * rFreq;
     }
   }
 
   // Check the last year in the recurrence
   for (it = mons->begin();  it != mons->end();  ++it) {
     ++countGone;
     if (data.year > endYear
     ||  (   *it > endMonth && (*it > 3 || !mar1TooEarly)
          || *it == 2 && feb28ok && QDate::leapYear(data.year))) {
       if (*it == 2 && data.feb29 && !QDate::leapYear(data.year)) {
         // The next recurrence should be on February 29th, but it's a non-leap year
         switch (mFeb29YearlyType) {
           case rFeb28:
             data.month = 2;
             data.day   = 28;
             break;
           case rMar1:
             data.month = 3;
             data.day   = 1;
             break;
           case rFeb29:   // impossible in this context!
             break;
         }
       }
       else
         data.month = *it;
       break;
     }
     if (--countTogo == 0)
       return 0;
   }
 ex:
   enddate = data.date();
   return countGone;
 }
 
 
 /* Find count and, depending on 'func', the end date of an annual recurrence by date.
  * Reply = total number of occurrences up to 'enddate', or 0 if error.
  * If 'func' = END_DATE_AND_COUNT or NEXT_AFTER_DATE, 'enddate' is updated to the
  * recurrence end date.
  */
 struct Recurrence::YearlyPosData {
     const Recurrence *recurrence;
     int               year;          // current year
     int               month;         // current month 1..12
     int               day;           // current day of month 1..31
     int               daysPerMonth;  // number of days which recur each month, or -1 if variable
     int               count;         // number of days which recur each year, or -1 if variable
     bool              varies;        // true if number of days varies from year to year
   private:
     mutable QValueList<int> days;
   public:
     YearlyPosData(const Recurrence* r, const QDate &date)
           : recurrence(r), year(date.year()), month(date.month()), day(date.day()), count(-1)
             { if ((daysPerMonth = r->countMonthlyPosDays()) > 0)
                 count = daysPerMonth * r->rYearNums.count();
               varies = (daysPerMonth < 0);
             }
     const QValueList<int>* dayList() const {
             QDate startOfMonth(year, month, 1);
             recurrence->getMonthlyPosDays(days, startOfMonth.daysInMonth(), startOfMonth.dayOfWeek());
             return &days;
     }
     int    yearMonth() const    { return year*12 + month - 1; }
     void   addMonths(int diff)  { month += diff - 1;  year += month / 12;  month = month % 12 + 1; }
     QDate  date() const         { return QDate(year, month, day); }
 };
 
 int Recurrence::yearlyPosCalc(PeriodFunc func, QDate &enddate) const
 {
   if (rYearNums.isEmpty() || rMonthPositions.isEmpty())
     return 0;
   YearlyPosData data(this, mRecurStart.date());
   switch (func) {
     case END_DATE_AND_COUNT:
       return yearlyPosCalcEndDate(enddate, data);
     case COUNT_TO_DATE:
       return yearlyPosCalcToDate(enddate, data);
     case NEXT_AFTER_DATE:
       return yearlyPosCalcNextAfter(enddate, data);
   }
   return 0;
 }
 
 int Recurrence::yearlyPosCalcEndDate(QDate &enddate, YearlyPosData &data) const
 {
   uint countTogo = rDuration + mRecurExDatesCount;
   int  countGone = 0;
   QValueList<int>::ConstIterator id;
   const QValueList<int>* days;
 
   if (data.month > 1 || data.day > 1) {
     // Check what remains of the start year
     for (QPtrListIterator<int> im(rYearNums); im.current(); ++im) {
       if (*im.current() >= data.month) {
         // Check what remains of the start month
         if (data.day > 1 || data.varies
         ||  static_cast<uint>(data.daysPerMonth) >= countTogo) {
           data.month = *im.current();
           days = data.dayList();
           for (id = days->begin();  id != days->end();  ++id) {
             if (*id >= data.day) {
               ++countGone;
               if (--countTogo == 0) {
                 data.month = *im.current();
                 data.day = *id;
                 goto ex;
               }
             }
           }
           data.day = 1;
         } else {
           // The number of days per month is constant, so skip
           // the whole month.
           countTogo -= data.daysPerMonth;
           countGone += data.daysPerMonth;
         }
       }
     }
     data.month = 1;
     data.year += rFreq;
   }
 
   if (data.varies) {
     // The number of recurrences varies from year to year.
     for ( ; ; ) {
       for (QPtrListIterator<int> im(rYearNums); im.current(); ++im) {
         data.month = *im.current();
         days = data.dayList();
         int n = days->count();
         if (static_cast<uint>(n) >= countTogo) {
           // Check the last month in the recurrence
           for (id = days->begin();  id != days->end();  ++id) {
             ++countGone;
             if (--countTogo == 0) {
               data.day = *id;
               goto ex;
             }
           }
         }
         countTogo -= n;
         countGone += n;
       }
       data.year += rFreq;
     }
   } else {
     // The number of recurrences is the same every year,
     // so skip the year-by-year check.
     // Skip the remaining whole years, but leave at least
     // 1 recurrence remaining, in order to get its date.
     int wholeYears = (countTogo - 1) / data.count;
     data.year += wholeYears * rFreq;
     countGone += wholeYears * data.count;
     countTogo -= wholeYears * data.count;
 
     // Check the last year in the recurrence.
     for (QPtrListIterator<int> im(rYearNums); im.current(); ++im) {
       if (static_cast<uint>(data.daysPerMonth) >= countTogo) {
         // Check the last month in the recurrence
         data.month = *im.current();
         days = data.dayList();
         for (id = days->begin();  id != days->end();  ++id) {
           ++countGone;
           if (--countTogo == 0) {
             data.day = *id;
             goto ex;
           }
         }
       }
       countTogo -= data.daysPerMonth;
       countGone += data.daysPerMonth;
     }
     data.year += rFreq;
   }
 ex:
   enddate = data.date();
   return countGone;
 }
 
 int Recurrence::yearlyPosCalcToDate(const QDate &enddate, YearlyPosData &data) const
 {
   int countGone = 0;
   int countMax  = (rDuration > 0) ? rDuration + mRecurExDatesCount : INT_MAX;
   int endYear  = enddate.year();
   int endMonth = enddate.month();
   int endDay   = enddate.day();
   if (endDay < data.day && --endMonth == 0) {
     endMonth = 12;
     --endYear;
   }
   int endYearMonth = endYear*12 + endMonth;
   QValueList<int>::ConstIterator id;
   const QValueList<int>* days;
 
   if (data.month > 1 || data.day > 1) {
     // Check what remains of the start year
     for (QPtrListIterator<int> im(rYearNums); im.current(); ++im) {
       if (*im.current() >= data.month) {
         data.month = *im.current();
         if (data.yearMonth() > endYearMonth)
           return countGone;
         // Check what remains of the start month
         bool lastMonth = (data.yearMonth() == endYearMonth);
         if (lastMonth || data.day > 1 || data.varies) {
           days = data.dayList();
           if (lastMonth || data.day > 1) {
             for (id = days->begin();  id != days->end();  ++id) {
               if (*id >= data.day) {
                 if (lastMonth && *id > endDay)
                   return countGone;
                 if (++countGone >= countMax)
                   return countMax;
               }
             }
           } else {
             countGone += days->count();
             if (countGone >= countMax)
               return countMax;
           }
           data.day = 1;
         } else {
           // The number of days per month is constant, so skip
           // the whole month.
           countGone += data.daysPerMonth;
           if (countGone >= countMax)
             return countMax;
         }
       }
     }
     data.month = 1;
     data.year += rFreq;
   }
 
   if (data.varies) {
     // The number of recurrences varies from year to year.
     for ( ; ; ) {
       for (QPtrListIterator<int> im(rYearNums); im.current(); ++im) {
         data.month = *im.current();
         days = data.dayList();
         if (data.yearMonth() >= endYearMonth) {
           if (data.yearMonth() > endYearMonth)
             return countGone;
           // Check the last month in the recurrence
           for (id = days->begin();  id != days->end();  ++id) {
             if (*id > endDay)
               return countGone;
             if (++countGone >= countMax)
               return countMax;
           }
         } else {
           countGone += days->count();
           if (countGone >= countMax)
             return countMax;
         }
       }
       data.year += rFreq;
     }
   } else {
     // The number of recurrences is the same every year,
     // so skip the year-by-year check.
     // Skip the remaining whole years, but leave at least
     // 1 recurrence remaining, in order to get its date.
     int wholeYears = endYear - data.year;
     countGone += (wholeYears / rFreq) * data.count;
     if (countGone >= countMax)
       return countMax;
     if (wholeYears % rFreq)
       return countGone;      // end year isn't a recurrence year
     data.year = endYear;
 
     // Check the last year in the recurrence.
     for (QPtrListIterator<int> im(rYearNums); im.current(); ++im) {
       data.month = *im.current();
       if (data.month >= endMonth) {
         if (data.month > endMonth)
           return countGone;
         // Check the last month in the recurrence
         days = data.dayList();
         for (id = days->begin();  id != days->end();  ++id) {
           if (*id > endDay)
             return countGone;
           if (++countGone >= countMax)
             return countMax;
         }
       } else {
         countGone += data.daysPerMonth;
         if (countGone >= countMax)
           return countMax;
       }
     }
   }
   return countGone;
 }
 
 int Recurrence::yearlyPosCalcNextAfter(QDate &enddate, YearlyPosData &data) const
 {
   uint countTogo = (rDuration > 0) ? rDuration + mRecurExDatesCount : UINT_MAX;
   int  countGone = 0;
   int endYear  = enddate.year();
   int endMonth = enddate.month();
   int endDay   = enddate.day();
   if (endDay < data.day && --endMonth == 0) {
     endMonth = 12;
     --endYear;
   }
   int endYearMonth = endYear*12 + endMonth;
   QValueList<int>::ConstIterator id;
   const QValueList<int>* days;
 
   if (data.varies) {
     // The number of recurrences varies from year to year.
     for ( ; ; ) {
       // Check the next year
       for (QPtrListIterator<int> im(rYearNums); im.current(); ++im) {
         if (*im.current() >= data.month) {
           // Check the next month
           data.month = *im.current();
           int ended = data.yearMonth() - endYearMonth;
           days = data.dayList();
           if (ended >= 0 || data.day > 1) {
             // This is the start or end month, so check each day
             for (id = days->begin();  id != days->end();  ++id) {
               if (*id >= data.day) {
                 ++countGone;
                 if (ended > 0 || (ended == 0 && *id > endDay)) {
                   data.day = *id;
                   goto ex;
                 }
                 if (--countTogo == 0)
                   return 0;
               }
             }
           } else {
             // Skip the whole month
             uint n = days->count();
             if (n >= countTogo)
               return 0;
             countGone += n;
           }
           data.day = 1;      // we've checked the start month now
         }
       }
       data.month = 1;        // we've checked the start year now
       data.year += rFreq;
     }
   } else {
     // The number of recurrences is the same every year.
     if (data.month > 1 || data.day > 1) {
       // Check what remains of the start year
       for (QPtrListIterator<int> im(rYearNums); im.current(); ++im) {
         if (*im.current() >= data.month) {
           // Check what remains of the start month
           data.month = *im.current();
           int ended = data.yearMonth() - endYearMonth;
           if (ended >= 0 || data.day > 1) {
             // This is the start or end month, so check each day
             days = data.dayList();
             for (id = days->begin();  id != days->end();  ++id) {
               if (*id >= data.day) {
                 ++countGone;
                 if (ended > 0 || (ended == 0 && *id > endDay)) {
                   data.day = *id;
                   goto ex;
                 }
                 if (--countTogo == 0)
                   return 0;
               }
             }
             data.day = 1;      // we've checked the start month now
           } else {
             // Skip the whole month.
             if (static_cast<uint>(data.daysPerMonth) >= countTogo)
               return 0;
             countGone += data.daysPerMonth;
           }
         }
       }
       data.year += rFreq;
     }
     // Skip the remaining whole years to at least endYear.
     int recurYears = (endYear - data.year + rFreq - 1) / rFreq;
     if ((endYear - data.year)%rFreq == 0
     &&  *rYearNums.getLast() <= endMonth)
       ++recurYears;    // required year is after endYear
     if (recurYears) {
       int n = recurYears * data.count;
       if (static_cast<uint>(n) > countTogo)
         return 0;     // reached end of recurrence
       countTogo -= n;
       countGone += n;
       data.year += recurYears * rFreq;
     }
 
     // Check the last year in the recurrence
     for (QPtrListIterator<int> im(rYearNums); im.current(); ++im) {
       data.month = *im.current();
       int ended = data.yearMonth() - endYearMonth;
       if (ended >= 0) {
         // This is the end month, so check each day
         days = data.dayList();
         for (id = days->begin();  id != days->end();  ++id) {
           ++countGone;
           if (ended > 0 || (ended == 0 && *id > endDay)) {
             data.day = *id;
             goto ex;
           }
           if (--countTogo == 0)
             return 0;
         }
       } else {
         // Skip the whole month.
         if (static_cast<uint>(data.daysPerMonth) >= countTogo)
           return 0;
         countGone += data.daysPerMonth;
       }
     }
   }
 ex:
   enddate = data.date();
   return countGone;
 }
 
 
 /* Find count and, depending on 'func', the end date of an annual recurrence by day.
  * Reply = total number of occurrences up to 'enddate', or 0 if error.
  * If 'func' = END_DATE_AND_COUNT or NEXT_AFTER_DATE, 'enddate' is updated to the
  * recurrence end date.
  */
 struct Recurrence::YearlyDayData {
     int    year;       // current year
     int    day;        // current day of year 1..366
     bool   varies;     // true if day 366 recurs
   private:
     int    daycount;
   public:
     YearlyDayData(const Recurrence* r, const QDate &date)
              : year(date.year()), day(date.dayOfYear()), varies(*r->rYearNums.getLast() == 366),
                daycount(r->rYearNums.count()) { }
     bool  leapYear() const       { return QDate::leapYear(year); }
     int   dayCount() const       { return daycount - (varies && !QDate::leapYear(year) ? 1 : 0); }
     bool  isMaxDayCount() const  { return !varies || QDate::leapYear(year); }
     QDate date() const           { return QDate(year, 1, 1).addDays(day - 1); }
 };
 
 int Recurrence::yearlyDayCalc(PeriodFunc func, QDate &enddate) const
 {
   if (rYearNums.isEmpty())
     return 0;
   YearlyDayData data(this, mRecurStart.date());
   switch (func) {
     case END_DATE_AND_COUNT:
       return yearlyDayCalcEndDate(enddate, data);
     case COUNT_TO_DATE:
       return yearlyDayCalcToDate(enddate, data);
     case NEXT_AFTER_DATE:
       return yearlyDayCalcNextAfter(enddate, data);
   }
   return 0;
 }
 
 int Recurrence::yearlyDayCalcEndDate(QDate &enddate, YearlyDayData &data) const
 {
   uint countTogo = rDuration + mRecurExDatesCount;
   int countGone = 0;
 
   if (data.day > 1) {
     // Check what remains of the start year
     bool leapOK = data.isMaxDayCount();
     for (QPtrListIterator<int> it(rYearNums); it.current(); ++it) {
       int d = *it.current();
       if (d >= data.day && (leapOK || d < 366)) {
         ++countGone;
         if (--countTogo == 0) {
           data.day = d;
           goto ex;
         }
       }
     }
     data.day = 1;
     data.year += rFreq;
   }
 
   if (data.varies) {
     // The number of recurrences is different in leap years,
     // so check year-by-year.
     for ( ; ; ) {
       uint n = data.dayCount();
       if (n >= countTogo)
         break;
       countTogo -= n;
       countGone += n;
       data.year += rFreq;
     }
   } else {
     // The number of recurrences is the same every year,
     // so skip the year-by-year check.
     // Skip the remaining whole years, but leave at least
     // 1 recurrence remaining, in order to get its date.
     int daysPerYear = rYearNums.count();
     int wholeYears = (countTogo - 1) / daysPerYear;
     data.year += wholeYears * rFreq;
     countGone += wholeYears * daysPerYear;
     countTogo -= wholeYears * daysPerYear;
   }
   if (countTogo) {
     // Check the last year in the recurrence
     for (QPtrListIterator<int> it(rYearNums); it.current(); ++it) {
       ++countGone;
       if (--countTogo == 0) {
         data.day = *it.current();
         break;
       }
     }
   }
 ex:
   enddate = data.date();
   return countGone;
 }
 
 int Recurrence::yearlyDayCalcToDate(const QDate &enddate, YearlyDayData &data) const
 {
   int countGone = 0;
   int countMax  = (rDuration > 0) ? rDuration + mRecurExDatesCount : INT_MAX;
   int endYear = enddate.year();
   int endDay  = enddate.dayOfYear();
 
   if (data.day > 1) {
     // Check what remains of the start year
     bool leapOK = data.isMaxDayCount();
     for (QPtrListIterator<int> it(rYearNums); it.current(); ++it) {
       int d = *it.current();
       if (d >= data.day && (leapOK || d < 366)) {
         if (data.year == endYear && d > endDay)
           return countGone;
         if (++countGone >= countMax)
           return countMax;
       }
     }
     data.day = 1;
     data.year += rFreq;
   }
 
   if (data.varies) {
     // The number of recurrences is different in leap years,
     // so check year-by-year.
     while (data.year < endYear) {
       uint n = data.dayCount();
       countGone += n;
       if (countGone >= countMax)
         return countMax;
       data.year += rFreq;
     }
     if (data.year > endYear)
       return countGone;
   } else {
     // The number of recurrences is the same every year.
     // Skip the remaining whole years.
     int wholeYears = endYear - data.year;
     countGone += (wholeYears / rFreq) * rYearNums.count();
     if (countGone >= countMax)
       return countMax;
     if (wholeYears % rFreq)
       return countGone;      // end year isn't a recurrence year
     data.year = endYear;
   }
 
   if (data.year <= endYear) {
     // Check the last year in the recurrence
     for (QPtrListIterator<int> it(rYearNums); it.current(); ++it) {
       if (*it.current() > endDay)
         return countGone;
       if (++countGone >= countMax)
         return countMax;
     }
   }
   return countGone;
 }
 
 int Recurrence::yearlyDayCalcNextAfter(QDate &enddate, YearlyDayData &data) const
 {
   uint countTogo = (rDuration > 0) ? rDuration + mRecurExDatesCount : UINT_MAX;
   int  countGone = 0;
   int  endYear = enddate.year();
   int  endDay  = enddate.dayOfYear();
 
   if (data.day > 1) {
     // Check what remains of the start year
     bool leapOK = data.isMaxDayCount();
     for (QPtrListIterator<int> it(rYearNums); it.current(); ++it) {
       int d = *it.current();
       if (d >= data.day && (leapOK || d < 366)) {
         ++countGone;
         if (data.year == endYear && d > endDay) {
           data.day = d;
           goto ex;
         }
         if (--countTogo == 0)
           return 0;
       }
     }
     data.day = 1;
     data.year += rFreq;
   }
 
   if (data.varies) {
     // The number of recurrences is different in leap years,
     // so check year-by-year.
     while (data.year <= endYear) {
       uint n = data.dayCount();
       if (data.year == endYear && *rYearNums.getLast() > endDay)
         break;
       if (n >= countTogo)
         break;
       countTogo -= n;
       countGone += n;
       data.year += rFreq;
     }
   } else {
     // The number of recurrences is the same every year,
     // so skip the year-by-year check.
     // Skip the remaining whole years to at least endYear.
     int daysPerYear = rYearNums.count();
     int recurYears = (endYear - data.year + rFreq - 1) / rFreq;
     if ((endYear - data.year)%rFreq == 0
     &&  *rYearNums.getLast() <= endDay)
       ++recurYears;    // required year is after endYear
     if (recurYears) {
       int n = recurYears * daysPerYear;
       if (static_cast<uint>(n) > countTogo)
         return 0;     // reached end of recurrence
       countTogo -= n;
       countGone += n;
       data.year += recurYears * rFreq;
     }
   }
 
   // Check the last year in the recurrence
   for (QPtrListIterator<int> it(rYearNums); it.current(); ++it) {
     ++countGone;
     int d = *it.current();
     if (data.year > endYear || d > endDay) {
       data.day = d;
       break;
     }
     if (--countTogo == 0)
       return 0;
   }
 ex:
   enddate = data.date();
   return countGone;
 }
 
 // Get the days in this month which recur, in numerical order.
 // Parameters: daysInMonth = number of days in this month
 //             startDayOfWeek = day of week for first day of month.
 void Recurrence::getMonthlyPosDays(QValueList<int> &list, int daysInMonth, int startDayOfWeek) const
 {
   list.clear();
   int endDayOfWeek = (startDayOfWeek + daysInMonth - 2) % 7 + 1;
   // Go through the list, compiling a bit list of actual day numbers
   Q_UINT32 days = 0;
   for (QPtrListIterator<rMonthPos> pos(rMonthPositions); pos.current(); ++pos) {
     int weeknum = pos.current()->rPos - 1;   // get 0-based week number
     QBitArray &rdays = pos.current()->rDays;
     if (pos.current()->negative) {
       // nth days before the end of the month
       for (uint i = 1; i <= 7; ++i) {
         if (rdays.testBit(i - 1)) {
           int day = daysInMonth - weeknum*7 - (endDayOfWeek - i + 7) % 7;
           if (day > 0)
             days |= 1 << (day - 1);
         }
       }
     } else {
       // nth days after the start of the month
       for (uint i = 1; i <= 7; ++i) {
         if (rdays.testBit(i - 1)) {
           int day = 1 + weeknum*7 + (i - startDayOfWeek + 7) % 7;
           if (day <= daysInMonth)
             days |= 1 << (day - 1);
         }
       }
     }
   }
   // Compile the ordered list
   Q_UINT32 mask = 1;
   for (int i = 0; i < daysInMonth; mask <<= 1, ++i) {
     if (days & mask)
       list.append(i + 1);
   }
 }
 
 // Get the number of days in the month which recur.
 // Reply = -1 if the number varies from month to month.
 int Recurrence::countMonthlyPosDays() const
 {
   int count = 0;
   Q_UINT8 positive[5] = { 0, 0, 0, 0, 0 };
   Q_UINT8 negative[4] = { 0, 0, 0, 0 };
   for (QPtrListIterator<rMonthPos> pos(rMonthPositions); pos.current(); ++pos) {
     int weeknum = pos.current()->rPos;
     Q_UINT8* wk;
     if (pos.current()->negative) {
       // nth days before the end of the month
       if (weeknum > 4)
         return -1;       // days in 5th week are often missing
       wk = &negative[4 - weeknum];
     } else {
       // nth days after the start of the month
       if (weeknum > 4)
         return -1;       // days in 5th week are often missing
       wk = &positive[weeknum - 1];
     }
     QBitArray &rdays = pos.current()->rDays;
     for (uint i = 0; i < 7; ++i) {
       if (rdays.testBit(i)) {
         ++count;
         *wk |= (1 << i);
       }
     }
   }
   // Check for any possible days which could be duplicated by
   // a positive and a negative position.
   for (int i = 0; i < 4; ++i) {
     if (negative[i] & (positive[i] | positive[i+1]))
       return -1;
   }
   return count;
 }
 
 // Get the days in this month which recur, in numerical order.
 // Reply = true if day numbers varies from month to month.
 bool Recurrence::getMonthlyDayDays(QValueList<int> &list, int daysInMonth) const
 {
   list.clear();
   bool variable = false;
   Q_UINT32 days = 0;
   for (QPtrListIterator<int> it(rMonthDays); it.current(); ++it) {
     int day = *it.current();
     if (day > 0) {
       // date in the month
       if (day <= daysInMonth)
         days |= 1 << (day - 1);
       if (day > 28 && day <= 31)
         variable = true;     // this date does not appear in some months
     } else if (day < 0) {
       // days before the end of the month
       variable = true;       // this date varies depending on the month length
       day = daysInMonth + day;    // zero-based day of month
       if (day >= 0)
         days |= 1 << day;
     }
   }
   // Compile the ordered list
   Q_UINT32 mask = 1;
   for (int i = 0; i < daysInMonth; mask <<= 1, ++i) {
     if (days & mask)
       list.append(i + 1);
   }
   return variable;
 }
 
 // Get the months which recur, in numerical order, for both leap years and non-leap years.
 // N.B. If February 29th recurs on March 1st in non-leap years, February (not March) is
 // included in the non-leap year month list.
 // Reply = true if February 29th also recurs.
 bool Recurrence::getYearlyMonthMonths(int day, QValueList<int> &list, QValueList<int> &leaplist) const
 {
   list.clear();
   leaplist.clear();
   bool feb29 = false;
   for (QPtrListIterator<int> it(rYearNums); it.current(); ++it) {
     int month = *it.current();
     if (month == 2) {
       if (day <= 28) {
         list.append(month);     // date appears in February
         leaplist.append(month);
       }
       else if (day == 29) {
         // February 29th
         leaplist.append(month);
         switch (mFeb29YearlyType) {
           case rFeb28:
           case rMar1:
             list.append(2);
             break;
           case rFeb29:
             break;
         }
         feb29 = true;
       }
     }
     else if (day <= 30 || QDate(2000, month, 1).daysInMonth() == 31) {
       list.append(month);       // date appears in every month
       leaplist.append(month);
     }
   }
   return feb29;
 }
 
 /* From the recurrence day of the week list, get the earliest day in the
  * specified week which is >= the startDay.
  * Parameters:  startDay = 1..7 (Monday..Sunday)
  *              useWeekStart = true to end search at day before next rWeekStart
  *                           = false to search for a full 7 days
  * Reply = day of the week (1..7), or 0 if none found.
  */
 int Recurrence::getFirstDayInWeek(int startDay, bool useWeekStart) const
 {
   int last = ((useWeekStart ? rWeekStart : startDay) + 5)%7;
   for (int i = startDay - 1;  ;  i = (i + 1)%7) {
     if (rDays.testBit(i))
       return i + 1;
     if (i == last)
       return 0;
   }
 }
 
 /* From the recurrence day of the week list, get the latest day in the
  * specified week which is <= the endDay.
  * Parameters:  endDay = 1..7 (Monday..Sunday)
  *              useWeekStart = true to end search at rWeekStart
  *                           = false to search for a full 7 days
  * Reply = day of the week (1..7), or 0 if none found.
  */
 int Recurrence::getLastDayInWeek(int endDay, bool useWeekStart) const
 {
   int last = useWeekStart ? rWeekStart - 1 : endDay%7;
   for (int i = endDay - 1;  ;  i = (i + 6)%7) {
     if (rDays.testBit(i))
       return i + 1;
     if (i == last)
       return 0;
   }
 }
 
 /* From the recurrence monthly day number list or monthly day of week/week of
  * month list, get the earliest day in the specified month which is >= the
  * earliestDate.
  */
 QDate Recurrence::getFirstDateInMonth(const QDate &earliestDate) const
 {
   int earliestDay = earliestDate.day();
   int daysInMonth = earliestDate.daysInMonth();
   switch (recurs) {
     case rMonthlyDay: {
       int minday = daysInMonth + 1;
       for (QPtrListIterator<int> it(rMonthDays);  it.current();  ++it) {
         int day = *it.current();
         if (day < 0)
           day = daysInMonth + day + 1;
         if (day >= earliestDay  &&  day < minday)
           minday = day;
       }
       if (minday <= daysInMonth)
         return earliestDate.addDays(minday - earliestDay);
       break;
     }
     case rMonthlyPos:
     case rYearlyPos: {
       QDate monthBegin(earliestDate.addDays(1 - earliestDay));
       QValueList<int> dayList;
       getMonthlyPosDays(dayList, daysInMonth, monthBegin.dayOfWeek());
       for (QValueList<int>::ConstIterator id = dayList.begin();  id != dayList.end();  ++id) {
         if (*id >= earliestDay)
           return monthBegin.addDays(*id - 1);
       }
       break;
     }
   }
   return QDate();
 }
 
 /* From the recurrence monthly day number list or monthly day of week/week of
  * month list, get the latest day in the specified month which is <= the
  * latestDate.
  */
 QDate Recurrence::getLastDateInMonth(const QDate &latestDate) const
 {
   int latestDay = latestDate.day();
   int daysInMonth = latestDate.daysInMonth();
   switch (recurs) {
     case rMonthlyDay: {
       int maxday = -1;
       for (QPtrListIterator<int> it(rMonthDays);  it.current();  ++it) {
         int day = *it.current();
         if (day < 0)
           day = daysInMonth + day + 1;
         if (day <= latestDay  &&  day > maxday)
           maxday = day;
       }
       if (maxday > 0)
         return QDate(latestDate.year(), latestDate.month(), maxday);
       break;
     }
     case rMonthlyPos:
     case rYearlyPos: {
       QDate monthBegin(latestDate.addDays(1 - latestDay));
       QValueList<int> dayList;
       getMonthlyPosDays(dayList, daysInMonth, monthBegin.dayOfWeek());
       for (QValueList<int>::ConstIterator id = dayList.fromLast();  id != dayList.end();  --id) {
         if (*id <= latestDay)
           return monthBegin.addDays(*id - 1);
       }
       break;
     }
   }
   return QDate();
 }
 
 /* From the recurrence yearly month list or yearly day list, get the earliest
  * month or day in the specified year which is >= the earliestDate.
  * Note that rYearNums is sorted in numerical order.
  */
 QDate Recurrence::getFirstDateInYear(const QDate &earliestDate) const
 {
   QPtrListIterator<int> it(rYearNums);
   switch (recurs) {
     case rYearlyMonth: {
       int day = recurStart().date().day();
       int earliestYear  = earliestDate.year();
       int earliestMonth = earliestDate.month();
       int earliestDay   = earliestDate.day();
       if (earliestDay > day) {
         // The earliest date is later in the month than the recurrence date,
         // so skip to the next month before starting to check
         if (++earliestMonth > 12)
           return QDate();
       }
       for ( ;  it.current();  ++it) {
         int month = *it.current();
         if (month >= earliestMonth) {
           if (day <= 28  ||  QDate::isValid(earliestYear, month, day))
             return QDate(earliestYear, month, day);
           if (day == 29  &&  month == 2) {
             // It's a recurrence on February 29th, in a non-leap year
             switch (mFeb29YearlyType) {
               case rMar1:
                 return QDate(earliestYear, 3, 1);
               case rFeb28:
                 if (earliestDay <= 28)
                   return QDate(earliestYear, 2, 28);
                 break;
               case rFeb29:
                 break;
diff --git a/pwmanager/pwmanager/pwm.cpp b/pwmanager/pwmanager/pwm.cpp
index 083e6d1..48257ef 100644
--- a/pwmanager/pwmanager/pwm.cpp
+++ b/pwmanager/pwmanager/pwm.cpp
@@ -1,1549 +1,1549 @@
 /***************************************************************************
  *                                                                         *
  *   copyright (C) 2003, 2004 by Michael Buesch                            *
  *   email: mbuesch@freenet.de                                             *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License version 2        *
  *   as published by the Free Software Foundation.                         *
  *                                                                         *
  ***************************************************************************/
 
 /***************************************************************************
  * copyright (C) 2004 by Ulf Schenk
  * This file is originaly based on version 1.0.1 of pwmanager
  * and was modified to run on embedded devices that run microkde
  *
  * $Id$
  **************************************************************************/  
 
 #include <klocale.h>
 #include <klistview.h>
 #include <ktoolbar.h>
 #include <kfiledialog.h>
 #include <kiconloader.h>
 #include <kmessagebox.h>
 
 #include <qstatusbar.h>
 
 #ifndef PWM_EMBEDDED
 #include <kmenubar.h>
 #include <kstatusbar.h>
 #include <dcopclient.h>
 #include "configwndimpl.h"
 #include "configuration.h"
 #else
 #include <qmenubar.h>
 #include <qmessagebox.h>
 #include <pwmprefs.h>
 #include <kpimglobalprefs.h>
 #include <kcmconfigs/kcmpwmconfig.h>
 #include <kcmconfigs/kcmkdepimconfig.h>
 #include <kcmultidialog.h>
 #include "editcategory.h"
 #endif
 
 
 #ifndef DESKTOP_VERSION
 #include <qpe/global.h>
 #endif
 
 #include <qpixmap.h>
 #include <qcheckbox.h>
 #include <qspinbox.h>
 #include <qlineedit.h>
 #include <qfileinfo.h>
 #include <qclipboard.h>
 
 
 #include <stdio.h>
 
 #include "pwm.h"
 #include "pwminit.h"
 #include "pwmprint.h"
 #include "addentrywndimpl.h"
 #include "globalstuff.h"
 #include "findwndimpl.h"
 #include "csv.h"
 
 #ifdef CONFIG_KWALLETIF
 # include "kwalletif.h"
 # include "kwalletemu.h"
 #endif
 #ifdef CONFIG_KEYCARD
 # include "pwmkeycard.h"
 #endif
 
 
         #define DEFAULT_SIZE    (QSize(700, 400))
 
 // Button IDs for "file" popup menu
 enum {
         BUTTON_POPUP_FILE_NEW = 0,
         BUTTON_POPUP_FILE_OPEN,
         BUTTON_POPUP_FILE_CLOSE,
         BUTTON_POPUP_FILE_SAVE,
         BUTTON_POPUP_FILE_SAVEAS,
         BUTTON_POPUP_FILE_EXPORT,
         BUTTON_POPUP_FILE_IMPORT,
         BUTTON_POPUP_FILE_PRINT,
         BUTTON_POPUP_FILE_QUIT
 };
 // Button IDs for "manage" popup menu
 enum {
         BUTTON_POPUP_MANAGE_ADD = 0,
         BUTTON_POPUP_MANAGE_EDIT,
         BUTTON_POPUP_MANAGE_DEL,
         BUTTON_POPUP_MANAGE_CHANGEMP
 };
 // Button IDs for chipcard popup menu
 enum {
 #ifdef CONFIG_KEYCARD
         BUTTON_POPUP_CHIPCARD_GENNEW = 0,
         BUTTON_POPUP_CHIPCARD_DEL,
         BUTTON_POPUP_CHIPCARD_READID,
         BUTTON_POPUP_CHIPCARD_SAVEBACKUP,
         BUTTON_POPUP_CHIPCARD_REPLAYBACKUP
 #else // CONFIG_KEYCARD
         BUTTON_POPUP_CHIPCARD_NO = 0
 #endif // CONFIG_KEYCARD
 };
 // Button IDs for "view" popup menu
 enum {
         BUTTON_POPUP_VIEW_FIND = 0,
         BUTTON_POPUP_VIEW_LOCK,
         BUTTON_POPUP_VIEW_DEEPLOCK,
         BUTTON_POPUP_VIEW_UNLOCK
 };
 // Button IDs for "options" popup menu
 enum {
         BUTTON_POPUP_OPTIONS_CONFIG = 0
 #ifdef PWM_EMBEDDED
         ,BUTTON_POPUP_OPTIONS_CATEGORY
 #endif
 };
 // Button IDs for "export" popup menu (in "file" popup menu)
 enum {
         BUTTON_POPUP_EXPORT_TEXT = 0,
         BUTTON_POPUP_EXPORT_GPASMAN,
         BUTTON_POPUP_EXPORT_CSV
 #ifdef CONFIG_KWALLETIF
         ,BUTTON_POPUP_EXPORT_KWALLET
 #endif
 };
 // Button IDs for "import" popup menu (in "file" popup menu)
 enum {
         BUTTON_POPUP_IMPORT_TEXT = 0,
         BUTTON_POPUP_IMPORT_GPASMAN,
         BUTTON_POPUP_IMPORT_CSV
 #ifdef CONFIG_KWALLETIF
         ,BUTTON_POPUP_IMPORT_KWALLET
 #endif
 };
 
 #ifdef PWM_EMBEDDED
 // Button IDs for "help" popup menu
 enum {
         BUTTON_POPUP_HELP_LICENSE = 0,
         BUTTON_POPUP_HELP_FAQ,
         BUTTON_POPUP_HELP_ABOUT,
         BUTTON_POPUP_HELP_SYNC,
         BUTTON_POPUP_HELP_WHATSNEW
 };
 #endif
 
 // Button IDs for toolbar
 enum {
         BUTTON_TOOL_NEW = 0,
         BUTTON_TOOL_OPEN,
         BUTTON_TOOL_SAVE,
         BUTTON_TOOL_SAVEAS,
         BUTTON_TOOL_PRINT,
         BUTTON_TOOL_ADD,
         BUTTON_TOOL_EDIT,
         BUTTON_TOOL_DEL,
         BUTTON_TOOL_FIND,
         BUTTON_TOOL_LOCK,
         BUTTON_TOOL_DEEPLOCK,
         BUTTON_TOOL_UNLOCK
 };
 
 
 PwM::PwM(PwMInit *_init, PwMDoc *doc,
          bool virginity,
          QWidget *parent, const char *name)
  : KMainWindow(parent, "HALLO")
  , forceQuit (false)
  , forceMinimizeToTray (false)
 {
     syncManager = 0;
     virgin = !virginity;
         init = _init;
         connect(doc, SIGNAL(docClosed(PwMDoc *)),
                 this, SLOT(docClosed(PwMDoc *)));
         initMenubar();
         initToolbar();
         initMetrics();
         setVirgin(virginity);
         setFocusPolicy(QWidget::WheelFocus);
 #ifndef PWM_EMBEDDED
         statusBar()->show();
 #endif
         view = makeNewListView(doc);
         setCentralWidget(view);
         updateCaption();
         showStatMsg(i18n("Ready."));
 }
 
 PwM::~PwM()
 {
-    qDebug("PwM::~PwM() %x", this);
+    //qDebug("PwM::~PwM() %x", this);
         disconnect(curDoc(), SIGNAL(docClosed(PwMDoc *)),
                    this, SLOT(docClosed(PwMDoc *)));
         conf()->confWndMainWndSize(size());
     //LR closing of windows changed
     //needed for fastload option on PDA
         //emit closed(this);
         //qDebug("PwM::~PwM() emited closed(this)");
         delete view;
     delete syncManager;
 }
 
 void PwM::initMenubar()
 {
   KIconLoader* picons;
 #ifndef PWM_EMBEDDED
         KIconLoader icons;
         picons = &icons;
 #else
         picons = KGlobal::iconLoader();
 
 
         syncPopup = new KPopupMenu(this);
         
         syncManager = new KSyncManager((QWidget*)this, (KSyncInterface*)this, KSyncManager::PWMPI, PWMPrefs::instance(), syncPopup);
         syncManager->setBlockSave(false);
 
         connect ( syncPopup, SIGNAL( activated ( int )  ), syncManager, SLOT (slotSyncMenu( int ) ) );
         syncManager->fillSyncMenu();
 
 #endif
         filePopup = new KPopupMenu(this);
         importPopup = new KPopupMenu(filePopup);
         exportPopup = new KPopupMenu(filePopup);
         managePopup = new KPopupMenu(this);
 #ifdef CONFIG_KEYCARD
         chipcardPopup = new KPopupMenu(this);
 #endif // CONFIG_KEYCARD
         viewPopup = new KPopupMenu(this);
         optionsPopup = new KPopupMenu(this);
 
 // "file" popup menu
         filePopup->insertItem(QIconSet(picons->loadIcon("filenew", KIcon::Small)),
                               i18n("&New"), this,
                               SLOT(new_slot()), 0, BUTTON_POPUP_FILE_NEW);
         filePopup->insertItem(QIconSet(picons->loadIcon("fileopen", KIcon::Small)),
                               i18n("&Open"), this,
                               SLOT(open_slot()), 0, BUTTON_POPUP_FILE_OPEN);
         filePopup->insertItem(QIconSet(picons->loadIcon("fileclose", KIcon::Small)),
                               i18n("&Close"), this,
                               SLOT(close_slot()), 0, BUTTON_POPUP_FILE_CLOSE);
         filePopup->insertSeparator();
         filePopup->insertItem(QIconSet(picons->loadIcon("filesave", KIcon::Small)),
                               i18n("&Save"), this,
                               SLOT(save_slot()), 0, BUTTON_POPUP_FILE_SAVE);
         filePopup->insertItem(QIconSet(picons->loadIcon("filesaveas", KIcon::Small)),
                               i18n("Save &as..."),
                               this, SLOT(saveAs_slot()), 0,
                               BUTTON_POPUP_FILE_SAVEAS);
         filePopup->insertSeparator();
         // "file/export" popup menu
         exportPopup->insertItem(i18n("&Text-file..."), this,
                                 SLOT(exportToText()), 0, BUTTON_POPUP_EXPORT_TEXT);
         exportPopup->insertItem(i18n("&Gpasman / Kpasman ..."), this,
                                 SLOT(exportToGpasman()), 0, BUTTON_POPUP_EXPORT_GPASMAN);
         exportPopup->insertItem(i18n("&CSV (Comma Separated Value) ..."), this,
                                 SLOT(exportToCsv()), 0, BUTTON_POPUP_EXPORT_CSV);
 #ifdef CONFIG_KWALLETIF
         exportPopup->insertItem(i18n("&KWallet..."), this,
                                 SLOT(exportToKWallet()), 0, BUTTON_POPUP_EXPORT_KWALLET);
 #endif
         filePopup->insertItem(QIconSet(picons->loadIcon("fileexport", KIcon::Small)),
                               i18n("E&xport"), exportPopup,
                               BUTTON_POPUP_FILE_EXPORT);
         // "file/import" popup menu
         importPopup->insertItem(i18n("&Text-file..."), this,
                                 SLOT(importFromText()), 0, BUTTON_POPUP_IMPORT_TEXT);
         importPopup->insertItem(i18n("&Gpasman / Kpasman ..."), this,
                                 SLOT(importFromGpasman()), 0, BUTTON_POPUP_IMPORT_GPASMAN);
         importPopup->insertItem(i18n("&CSV (Comma Separated Value) ..."), this,
                                 SLOT(importCsv()), 0, BUTTON_POPUP_IMPORT_CSV);
 #ifdef CONFIG_KWALLETIF
         importPopup->insertItem(i18n("&KWallet..."), this,
                                 SLOT(importKWallet()), 0, BUTTON_POPUP_IMPORT_KWALLET);
 #endif
         filePopup->insertItem(QIconSet(picons->loadIcon("fileimport", KIcon::Small)),
                               i18n("I&mport"), importPopup,
                               BUTTON_POPUP_FILE_IMPORT);
         filePopup->insertSeparator();
         filePopup->insertItem(QIconSet(picons->loadIcon("fileprint", KIcon::Small)),
                               i18n("&Print..."), this,
                               SLOT(print_slot()), 0, BUTTON_POPUP_FILE_PRINT);
         filePopup->insertSeparator();
         filePopup->insertItem(QIconSet(picons->loadIcon("exit", KIcon::Small)),
                               i18n("&Quit"), this,
                               SLOT(quitButton_slot()), 0, BUTTON_POPUP_FILE_QUIT);
         menuBar()->insertItem(i18n("&File"), filePopup);
 // "manage" popup menu
         managePopup->insertItem(QIconSet(picons->loadIcon("pencil", KIcon::Small)),
                                 i18n("&Add password"), this,
                                 SLOT(addPwd_slot()), 0,
                                 BUTTON_POPUP_MANAGE_ADD);
         managePopup->insertItem(QIconSet(picons->loadIcon("edit", KIcon::Small)),
                                 i18n("&Edit"), this, SLOT(editPwd_slot()), 0,
                                 BUTTON_POPUP_MANAGE_EDIT);
         managePopup->insertItem(QIconSet(picons->loadIcon("editdelete", KIcon::Small)),
                                 i18n("&Delete"), this, SLOT(deletePwd_slot()),
                                 0, BUTTON_POPUP_MANAGE_DEL);
         managePopup->insertSeparator();
         managePopup->insertItem(QIconSet(picons->loadIcon("rotate", KIcon::Small)),
                                 i18n("Change &Master Password"), this,
                                 SLOT(changeMasterPwd_slot()), 0,
                                 BUTTON_POPUP_MANAGE_CHANGEMP);
         menuBar()->insertItem(i18n("&Manage"), managePopup);
 // "chipcard" popup menu
 #ifdef CONFIG_KEYCARD
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("filenew", KIcon::Small)),
                                   i18n("&Generate new key-card"), this,
                                   SLOT(genNewCard_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_GENNEW);
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("editdelete", KIcon::Small)),
                                   i18n("&Erase key-card"), this,
                                   SLOT(eraseCard_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_DEL);
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("", KIcon::Small)),
                                   i18n("Read card-&ID"), this,
                                   SLOT(readCardId_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_READID);
         chipcardPopup->insertSeparator();
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("2rightarrow", KIcon::Small)),
                                   i18n("&Make card backup-image"), this,
                                   SLOT(makeCardBackup_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_SAVEBACKUP);
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("2leftarrow", KIcon::Small)),
                                   i18n("&Replay card backup-image"), this,
                                   SLOT(replayCardBackup_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_REPLAYBACKUP);
         menuBar()->insertItem(i18n("&Chipcard manager"), chipcardPopup);
 #endif // CONFIG_KEYCARD
 // "view" popup menu
         viewPopup->insertItem(QIconSet(picons->loadIcon("find", KIcon::Small)),
                                 i18n("&Find"), this,
                                 SLOT(find_slot()), 0, BUTTON_POPUP_VIEW_FIND);
         viewPopup->insertSeparator();
         viewPopup->insertItem(QIconSet(picons->loadIcon("halfencrypted", KIcon::Small)),
                                 i18n("&Lock all entries"), this,
                                 SLOT(lockWnd_slot()), 0,
                                 BUTTON_POPUP_VIEW_LOCK);
         viewPopup->insertItem(QIconSet(picons->loadIcon("encrypted", KIcon::Small)),
                                 i18n("&Deep-lock all entries"), this,
                                 SLOT(deepLockWnd_slot()), 0,
                                 BUTTON_POPUP_VIEW_DEEPLOCK);
         viewPopup->insertItem(QIconSet(picons->loadIcon("decrypted", KIcon::Small)),
                                 i18n("&Unlock all entries"), this,
                                 SLOT(unlockWnd_slot()), 0,
                                 BUTTON_POPUP_VIEW_UNLOCK);
         menuBar()->insertItem(i18n("&View"), viewPopup);
 // "options" popup menu
         optionsPopup->insertItem(QIconSet(picons->loadIcon("configure", KIcon::Small)),
                                  i18n("&Configure..."), this,
                  SLOT(config_slot()),0,
                                  BUTTON_POPUP_OPTIONS_CONFIG);
         menuBar()->insertItem(i18n("&Options"), optionsPopup);
 // "help" popup menu
 #ifndef PWM_EMBEDDED
         helpPopup = helpMenu(QString::null, false);
 #else
         optionsPopup->insertItem(QIconSet(picons->loadIcon("configure", KIcon::Small)),
                                  i18n("C&ategories..."), this,
                  SLOT(category_slot()),0,
                                  BUTTON_POPUP_OPTIONS_CATEGORY);
 
 
         menuBar()->insertItem(i18n("&Sync"), syncPopup);
 
 
 
 
 
         helpPopup = new KPopupMenu(this);
 
 
         helpPopup->insertItem(i18n("&License"), this,
                                 SLOT(showLicense_slot()), 0,
                                 BUTTON_POPUP_HELP_LICENSE);
 
         helpPopup->insertItem(i18n("&Faq"), this,
                                 SLOT(faq_slot()), 0,
                                 BUTTON_POPUP_HELP_FAQ);
 
         helpPopup->insertItem(i18n("&About PwManager"), this,
                                 SLOT(createAboutData_slot()), 0,
                                 BUTTON_POPUP_HELP_ABOUT);
 
         helpPopup->insertItem(i18n("&Sync HowTo"), this,
                                 SLOT(syncHowTo_slot()), 0,
                                 BUTTON_POPUP_HELP_SYNC);
 
         helpPopup->insertItem(i18n("&What's New"), this,
                                 SLOT(whatsnew_slot()), 0,
                                 BUTTON_POPUP_HELP_WHATSNEW);
 
 #endif
         menuBar()->insertItem(i18n("&Help"), helpPopup);
 
 }
 
 void PwM::initToolbar()
 {
   KIconLoader* picons;
 #ifndef PWM_EMBEDDED
         KIconLoader icons;
         picons = &icons;
 #else
         picons = KGlobal::iconLoader();
 #endif
 
 #ifdef PWM_EMBEDDED
     if ( QApplication::desktop()->width() > 320 )
 #endif
     {
         toolBar()->insertButton(picons->loadIcon("filenew", KIcon::Toolbar),
                                 BUTTON_TOOL_NEW, SIGNAL(clicked(int)), this,
                                 SLOT(new_slot()), true, i18n("New"));
         toolBar()->insertButton(picons->loadIcon("fileopen", KIcon::Toolbar),
                                 BUTTON_TOOL_OPEN, SIGNAL(clicked(int)), this,
                                 SLOT(open_slot()), true, i18n("Open"));
         toolBar()->insertSeparator();
             }
         toolBar()->insertButton(picons->loadIcon("filesave", KIcon::Toolbar),
                                 BUTTON_TOOL_SAVE, SIGNAL(clicked(int)), this,
                                 SLOT(save_slot()), true, i18n("Save"));
         toolBar()->insertButton(picons->loadIcon("filesaveas", KIcon::Toolbar),
                                 BUTTON_TOOL_SAVEAS, SIGNAL(clicked(int)), this,
                                 SLOT(saveAs_slot()), true, i18n("Save as"));
         toolBar()->insertButton(picons->loadIcon("fileprint", KIcon::Toolbar),
                                 BUTTON_TOOL_PRINT, SIGNAL(clicked(int)), this,
                                 SLOT(print_slot()), true, i18n("Print..."));
         toolBar()->insertSeparator();
         toolBar()->insertButton(picons->loadIcon("pencil", KIcon::Toolbar),
                                 BUTTON_TOOL_ADD, SIGNAL(clicked(int)), this,
                                 SLOT(addPwd_slot()), true,
                                 i18n("Add password"));
         toolBar()->insertButton(picons->loadIcon("edit", KIcon::Toolbar),
                                 BUTTON_TOOL_EDIT, SIGNAL(clicked(int)), this,
                                 SLOT(editPwd_slot()), true,
                                 i18n("Edit password"));
         toolBar()->insertButton(picons->loadIcon("editdelete", KIcon::Toolbar),
                                 BUTTON_TOOL_DEL, SIGNAL(clicked(int)), this,
                                 SLOT(deletePwd_slot()), true,
                                 i18n("Delete password"));
         toolBar()->insertSeparator();
         toolBar()->insertButton(picons->loadIcon("find", KIcon::Toolbar),
                                 BUTTON_TOOL_FIND, SIGNAL(clicked(int)), this,
                                 SLOT(find_slot()), true, i18n("Find entry"));
         toolBar()->insertSeparator();
         toolBar()->insertButton(picons->loadIcon("halfencrypted", KIcon::Toolbar),
                                 BUTTON_TOOL_LOCK, SIGNAL(clicked(int)), this,
                                 SLOT(lockWnd_slot()), true,
                                 i18n("Lock all entries"));
         toolBar()->insertButton(picons->loadIcon("encrypted", KIcon::Toolbar),
                                 BUTTON_TOOL_DEEPLOCK, SIGNAL(clicked(int)), this,
                                 SLOT(deepLockWnd_slot()), true,
                                 i18n("Deep-Lock all entries"));
         toolBar()->insertButton(picons->loadIcon("decrypted", KIcon::Toolbar),
                                 BUTTON_TOOL_UNLOCK, SIGNAL(clicked(int)), this,
                                 SLOT(unlockWnd_slot()), true,
                                 i18n("Unlock all entries"));
 }
 
 void PwM::initMetrics()
 {
         QSize s = conf()->confWndMainWndSize();
         if (s.isValid())
                 resize(s);
         else
                 resize(DEFAULT_SIZE);
 }
 
 void PwM::updateCaption()
 {
         setPlainCaption(curDoc()->getTitle() + " - " PROG_NAME " " PACKAGE_VER);
 }
 
 void PwM::hideEvent(QHideEvent *)
 {
         if (isMinimized()) {
                 if (init->tray()) {
                         forceMinimizeToTray = true;
                         close();
                 }
                 int mmlock = conf()->confGlobMinimizeLock();
                 switch (mmlock) {
                         case 0:         // don't lock anything
                         break;
                         case 1: {// normal lock
                         curDoc()->lockAll(true);
                         break;
                         } case 2: {// deep-lock
                         curDoc()->deepLock();
                         break;
                 } default:
                         WARN();
                 }
         }
 }
 
 void PwM::setVirgin(bool v)
 {
         if (virgin == v)
                 return;
         virgin = v;
         filePopup->setItemEnabled(BUTTON_POPUP_FILE_SAVE, !v);
         filePopup->setItemEnabled(BUTTON_POPUP_FILE_SAVEAS, !v);
         filePopup->setItemEnabled(BUTTON_POPUP_FILE_EXPORT, !v);
         filePopup->setItemEnabled(BUTTON_POPUP_FILE_PRINT, !v);
         managePopup->setItemEnabled(BUTTON_POPUP_MANAGE_EDIT, !v);
         managePopup->setItemEnabled(BUTTON_POPUP_MANAGE_DEL, !v);
         managePopup->setItemEnabled(BUTTON_POPUP_MANAGE_CHANGEMP, !v);
         viewPopup->setItemEnabled(BUTTON_POPUP_VIEW_LOCK, !v);
         viewPopup->setItemEnabled(BUTTON_POPUP_VIEW_DEEPLOCK, !v);
         viewPopup->setItemEnabled(BUTTON_POPUP_VIEW_UNLOCK, !v);
         viewPopup->setItemEnabled(BUTTON_POPUP_VIEW_FIND, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_SAVE, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_SAVEAS, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_PRINT, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_EDIT, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_DEL, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_LOCK, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_DEEPLOCK, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_UNLOCK, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_FIND, !v);
 }
 
 void PwM::new_slot()
 {
         init->createMainWnd();
 }
 
 //US ENH
 void PwM::open_slot()
 {
         open_slot("");
 }
 
 void PwM::open_slot(QString fn)
 {
         openDoc(fn);
 }
 
 PwMDoc * PwM::openDoc(QString filename, bool openDeepLocked)
 {
         if (!isVirgin()) {
                 // open the document in a new window.
                 PwM *newInstance = init->createMainWnd();
                 PwMDoc *newDoc = newInstance->openDoc(filename, openDeepLocked);
                 if (!newDoc) {
                         newInstance->setForceQuit(true);
                         delete_and_null(newInstance);
                 }
                 return newDoc;
         }
 
         if (!curDoc()->openDocUi(curDoc(), filename, openDeepLocked))
                 return 0;
         showStatMsg(i18n("Successfully opened file."));
         updateCaption();
         setVirgin(false);
         return curDoc();
 }
 
 PwMView * PwM::makeNewListView(PwMDoc *doc)
 {
         PwMView *ret = new PwMView(this, this, doc);
         ret->setFont(conf()->confGlobEntryFont());
         ret->show();
         return ret;
 }
 
 void PwM::close_slot()
 {
         close();
 }
 
 void PwM::quitButton_slot()
 {
         init->shutdownApp(0);
 }
 
 void PwM::save_slot()
 {
         save();
 }
 
 bool PwM::save()
 {
         if (!curDoc()->saveDocUi(curDoc()))
                 return false;
         showStatMsg(i18n("Successfully saved data."));
         updateCaption();
         return true;
 }
 
 void PwM::saveAs_slot()
 {
         saveAs();
 }
 
 bool PwM::saveAs()
 {
         if (!curDoc()->saveAsDocUi(curDoc()))
                 return false;
         showStatMsg(i18n("Successfully saved data."));
         updateCaption();
         return true;
 }
 
 //US ENH : changed code to run with older MOC
 void PwM::addPwd_slot()
 {
   addPwd_slot1(0, 0);
 }
 
 void PwM::addPwd_slot1(QString *pw, PwMDoc *_doc)
 {
         PwMDoc *doc;
         if (_doc) {
                 doc = _doc;
         } else {
                 doc = curDoc();
         }
         PWM_ASSERT(doc);
         doc->timer()->getLock(DocTimer::id_autoLockTimer);
 #ifndef PWM_EMBEDDED
         AddEntryWndImpl w;
 #else
         AddEntryWndImpl w(doc, this, "addentrywndimpl");
 #endif
 
         vector<string> catList;
         doc->getCategoryList(&catList);
         unsigned i, size = catList.size();
         for (i = 0; i < size; ++i) {
                 w.addCategory(catList[i].c_str());
         }
         w.setCurrCategory(view->getCurrentCategory());
         if (pw)
                 w.pwLineEdit->setText(*pw);
 
       tryAgain:
         if (w.exec() == 1) 
           {
                 PwMDataItem d;
 
                 //US BUG: to initialize all values of curEntr with meaningfulldata,
                 // we call clear on it. Reason: Metadata will be uninitialized otherwise.
                 // another option would be to create a constructor for PwMDataItem
                 d.clear(true);
 
                 d.desc = w.getDescription().latin1();
                 d.name = w.getUsername().latin1();
                 d.pw = w.getPassword().latin1();
                 d.comment = w.getComment().latin1();
                 d.url = w.getUrl().latin1();
                 d.launcher = w.getLauncher().latin1();
                 PwMerror ret = doc->addEntry(w.getCategory(), &d);
                 if (ret == e_entryExists) {
                         KMessageBox::error(this,
                                            i18n
                                            ("An entry with this \"Description\",\n"
                                             "does already exist.\n"
                                             "Please select another description."),
                                            i18n("entry already exists."));
                         goto tryAgain;
                 } else if (ret == e_maxAllowedEntr) {
                         KMessageBox::error(this, i18n("The maximum possible number of\nentries"
                                                       "has been reached.\nYou can't add more entries."),
                                                  i18n("maximum number of entries"));
                         doc->timer()->putLock(DocTimer::id_autoLockTimer);
                         return;
                 }
         }
         setVirgin(false);
         doc->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 //US ENH : changed code to run with older MOC
 void PwM::editPwd_slot()
 {
   editPwd_slot3(0,0,0);
 }
 
 void PwM::editPwd_slot1(const QString *category)
 {
   editPwd_slot3(category, 0, 0);
 }
 
 void PwM::editPwd_slot3(const QString *category, const int *index,
                        PwMDoc *_doc)
 {
         PwMDoc *doc;
         if (_doc) {
                 doc = _doc;
         } else {
                 doc = curDoc();
         }
         PWM_ASSERT(doc);
         if (doc->isDocEmpty())
                 return;
         if (doc->isDeepLocked())
                 return;
         doc->timer()->getLock(DocTimer::id_autoLockTimer);
         unsigned int curEntryIndex;
         if (index) {
                 curEntryIndex = *index;
         } else {
                 if (!(view->getCurEntryIndex(&curEntryIndex))) {
                         printDebug("couldn't get index. Maybe we have a binary entry here.");
                         doc->timer()->putLock(DocTimer::id_autoLockTimer);
                         return;
                 }
         }
         QString curCategory;
         if (category) {
                 curCategory = *category;
         } else {
                 curCategory = view->getCurrentCategory();
         }
         PwMDataItem currItem;
         if (!doc->getEntry(curCategory, curEntryIndex, &currItem, true)) {
                 doc->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
         BUG_ON(currItem.binary);
 
         AddEntryWndImpl w(doc);
         vector<string> catList;
         doc->getCategoryList(&catList);
         unsigned i, size = catList.size();
         for (i = 0; i < size; ++i) {
                 w.addCategory(catList[i].c_str());
         }
         w.setCurrCategory(curCategory);
         w.setDescription(currItem.desc.c_str());
         w.setUsername(currItem.name.c_str());
         w.setPassword(currItem.pw.c_str());
         w.setUrl(currItem.url.c_str());
         w.setLauncher(currItem.launcher.c_str());
         w.setComment(currItem.comment.c_str());
         if (w.exec() == 1) {
                 currItem.desc = w.getDescription().latin1();
                 currItem.name = w.getUsername().latin1();
                 currItem.pw = w.getPassword().latin1();
                 currItem.comment = w.getComment().latin1();
                 currItem.url = w.getUrl().latin1();
                 currItem.launcher = w.getLauncher().latin1();
                 if (!doc->editEntry(curCategory, w.getCategory(),
                                          curEntryIndex, &currItem)) {
                         KMessageBox::error(this,
                                            i18n("Couldn't edit the entry.\n"
                                                 "Maybe you changed the category and\n"
                                                 "this entry is already present\nin the new "
                                                 "category?"),
                                            i18n("couldn't edit entry."));
                         doc->timer()->putLock(DocTimer::id_autoLockTimer);
                         return;
                 }
         }
         doc->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 void PwM::deletePwd_slot()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDocEmpty())
                 return;
         if (curDoc()->isDeepLocked())
                 return;
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         unsigned int curEntryIndex = 0;
         if (!(view->getCurEntryIndex(&curEntryIndex))) {
                 printDebug("couldn't get index");
                 curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
 
         PwMDataItem currItem;
         QString curCategory = view->getCurrentCategory();
         if (!curDoc()->getEntry(curCategory, curEntryIndex, &currItem)) {
                 printDebug("couldn't get entry");
                 curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
         if (KMessageBox::
             questionYesNo(this,
                           i18n
                           ("Do you really want to delete\nthe selected entry") +
                           " \n\"" + QString(currItem.desc.c_str())
                           + "\" ?", i18n("delete?"))
             == KMessageBox::Yes) {
 
                 curDoc()->delEntry(curCategory, curEntryIndex);
         }
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 void PwM::changeMasterPwd_slot()
 {
         PWM_ASSERT(curDoc());
         curDoc()->changeCurrentPw();
 }
 
 void PwM::lockWnd_slot()
 {
         PWM_ASSERT(curDoc());
         curDoc()->lockAll(true);
 }
 
 void PwM::deepLockWnd_slot()
 {
         PWM_ASSERT(curDoc());
         curDoc()->deepLock();
 }
 
 void PwM::unlockWnd_slot()
 {
         PWM_ASSERT(curDoc());
         curDoc()->lockAll(false);
 }
 
 void PwM::config_slot()
 {
   int oldStyle = conf()->confWndMainViewStyle();
 #ifdef PWM_EMBEDDED  
     KCMultiDialog*  ConfigureDialog = new KCMultiDialog( "PIM", this ,"pwmconfigdialog", true );
 
     KCMPwmConfig* pwmcfg = new KCMPwmConfig( ConfigureDialog->getNewVBoxPage(i18n( "PwManager")) , "KCMPwmConfig" );
     ConfigureDialog->addModule(pwmcfg );
 
     KCMKdePimConfig* kdelibcfg = new KCMKdePimConfig( ConfigureDialog->getNewVBoxPage(i18n( "Global")) , "KCMKdeLibConfig" );
     ConfigureDialog->addModule(kdelibcfg );
 
 #ifndef DESKTOP_VERSION
     ConfigureDialog->showMaximized();
 #endif
     if ( ConfigureDialog->exec() )
         KMessageBox::information( this,  i18n("Some changes are only\neffective after a restart!\n") );
     delete ConfigureDialog;
 
 #else //PWM_EMBEDDED
         // display the configuration window (modal mode)
         if (!conf()->showConfWnd(this))
                 return;
 #endif
 
         int newStyle = conf()->confWndMainViewStyle();
         // reinitialize tray
         init->initTray();
         // reinitialize KWallet emulation
         init->initKWalletEmu();
 
         PwMDocList *_dl = PwMDoc::getOpenDocList();
         const vector<PwMDocList::listItem> *dl = _dl->getList();
         vector<PwMDocList::listItem>::const_iterator i = dl->begin(),
                                                      end = dl->end();
         PwMDoc *doc;
         while (i != end) {
                 doc = (*i).doc;
                 // unlock-without-mpw timeout
                 doc->timer()->start(DocTimer::id_mpwTimer);
                 // auto-lock timeout
                 doc->timer()->start(DocTimer::id_autoLockTimer);
                 ++i;
         }
 
         const QValueList<PwM *> *ml = init->mainWndList();
 #ifndef PWM_EMBEDDED
         QValueList<PwM *>::const_iterator i2 = ml->begin(),
                                           end2 = ml->end();
 #else
         QValueList<PwM *>::ConstIterator i2 = ml->begin(),
                                           end2 = ml->end();
 #endif
         PwM *pwm;
         while (i2 != end2) {
                 pwm = *i2;
                 // reinitialize the window style.
                 if (oldStyle != newStyle)
                         pwm->curView()->initStyle(newStyle);
                 // set the new font
                 pwm->curView()->setFont(conf()->confGlobEntryFont());
                 ++i2;
         }
 }
 
 void PwM::activateMpButton(bool activate)
 {
         managePopup->setItemEnabled(BUTTON_POPUP_MANAGE_CHANGEMP, activate);
 }
 
 void PwM::closeEvent(QCloseEvent *e)
 {
-    qDebug("PwM::closeEvent ");
+    //qDebug("PwM::closeEvent ");
     emit closed( this );
     return;
         e->accept();
 }
 
 void PwM::docClosed(PwMDoc *doc)
 {
-    qDebug("PwM::docClosed ");
+    //qDebug("PwM::docClosed ");
         PARAM_UNUSED(doc);
         PWM_ASSERT(doc == curDoc());
         close();
 }
 
 void PwM::find_slot()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDocEmpty())
                 return;
         if (curDoc()->isDeepLocked())
                 return;
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         FindWndImpl findWnd(view);
         findWnd.exec();
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 void PwM::exportToText()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDocEmpty()) {
                 KMessageBox::information(this,
                                          i18n
                                          ("Sorry, there's nothing to export.\n"
                                           "Please first add some passwords."),
                                          i18n("nothing to do"));
                 return;
         }
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         QString fn(KFileDialog::getSaveFileName(QString::null,
                                                 i18n("*|plain-text file"),
                                                 this));
         if (fn == "") {
                 curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
 
         PwMerror ret = curDoc()->exportToText(&fn);
         if (ret != e_success) {
                 KMessageBox::error(this,
                                    i18n("Error: Couldn't write to file.\n"
                                         "Please check if you have permission to write\n"
                                         "to the file in that directory."),
                                    i18n("error while writing"));
         } else
                 showStatMsg(i18n("Successfully exported data."));
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 bool PwM::importFromText()
 {
         if (!isVirgin()) {
                 if (KMessageBox::questionYesNo(this,
                                                i18n("Do you want to import the data\n"
                                                     "into the current document? (If you\n"
                                                     "select \"no\", a new document will be\n"
                                                     "opened.)"),
                                                i18n("import into this document?"))
                     == KMessageBox::No) {
                         // import the data to a new window.
                         PwM *newInstance = init->createMainWnd();
                         bool ok = newInstance->importFromText();
                         if (!ok) {
                                 newInstance->setForceQuit(true);
                                 delete_and_null(newInstance);
                         }
                         return ok;
                 }
         }
 
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         PwMerror ret;
         QString path(KFileDialog::getOpenFileName(QString::null,
                                                   i18n("*|PWM-exported text file"),
                                                   this));
         if (path == "")
                 goto cancelImport;
 
         ret = curDoc()->importFromText(&path, 0);
         if (ret == e_fileFormat) {
                 KMessageBox::error(this,
                                    i18n("Could not read file-format.\n"
                                         "This seems to be _not_ a valid file\n"
                                         "exported by PwM."),
                                    i18n("invalid file-format"));
                 goto cancelImport;
         } else if (ret == e_invalidArg) {
                 BUG();
                 goto cancelImport;
         } else if (ret != e_success) {
                 KMessageBox::error(this,
                                    i18n("Could not import file!\n"
                                         "Do you have permission to read this file?\n"
                                         "Do you have enough free memory?"),
                                    i18n("import failed"));
                 goto cancelImport;
         }
         setVirgin(false);
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
         return true;
 
 cancelImport:
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
         return false;
 }
 
 void PwM::exportToGpasman()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDocEmpty()) {
                 KMessageBox::information(this,
                                          i18n
                                          ("Sorry, there's nothing to export.\n"
                                           "Please first add some passwords."),
                                          i18n("nothing to do"));
                 return;
         }
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         QString fn(KFileDialog::getSaveFileName(QString::null,
                                                 i18n("*|Gpasman or Kpasman file"),
                                                 this));
         if (fn == "") {
                 curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
 
         PwMerror ret = curDoc()->exportToGpasman(&fn);
         if (ret != e_success) {
                 if (ret == e_noPw) {
                         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                         return;
                 }
                 KMessageBox::error(this,
                                    i18n("Error: Couldn't write to file.\n"
                                         "Please check if you have permission to write "
                                         "to the file in that directory."),
                                    i18n("error while writing"));
         } else
                 showStatMsg(i18n("Successfully exported data."));
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 
 
 void PwM::exportToCsv()
 {
   PWM_ASSERT(curDoc());
   if (curDoc()->isDocEmpty()) {
     KMessageBox::information(this,
                              i18n
                              ("Sorry, there is nothing to export;\n"
                               "please add some passwords first."),
                              i18n("Nothing to Do"));
     return;
   }
 
   curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
   QString fn(KFileDialog::getSaveFileName("*.csv", i18n("*|CSV Text File"), this));
   if (fn.isEmpty()) {
     curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
     return;
   }
 
   Csv csv(this);
   if (!csv.exportData(fn, curDoc())) {
     curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
     showStatMsg(i18n("CSV file export failed."));
     return;
   }
   showStatMsg(i18n("Successfully exported data."));
   curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 bool PwM::importCsv()
 {
   Csv csv(this);
   if (!isVirgin()) {
     if (KMessageBox::questionYesNo(this,
        i18n("Do you want to import the data\n"
             "into the current document? (If you\n"
             "select \"no\", a new document will be\n"
             "opened.)"),
        i18n("Import into This Document?"))
     == KMessageBox::No) {
       // import the data to a new window.
       PwM *newInstance = init->createMainWnd();
       bool ok = newInstance->importCsv();
       if (!ok) {
         newInstance->setForceQuit(true);
         delete_and_null(newInstance);
       }
       return ok;
     }
   }
 
   QString filename = KFileDialog::getOpenFileName("*.csv", i18n("*|CSV Text File"), this);
   if (filename.isEmpty())
     return false;
   curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
   if (!csv.importData(filename, curDoc())) {
     curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
     showStatMsg(i18n("CSV file import failed."));
     return false;
   }
   curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
   KMessageBox::information(this,
                            i18n("Successfully imported the CSV data\n"
       "into the current document."), i18n("Successfully Imported"));
   showStatMsg(i18n("Successfully imported"));
   setVirgin(false);
   return true;
 }
 
 
 void PwM::exportToKWallet()
 {
 #ifdef CONFIG_KWALLETIF
         if (!checkAndAskForKWalletEmu())
                 return;
         PWM_ASSERT(curDoc());
         if (curDoc()->isDocEmpty()) {
                 KMessageBox::information(this,
                                          i18n
                                          ("Sorry, there's nothing to export.\n"
                                           "Please first add some passwords."),
                                          i18n("nothing to do"));
                 init->initKWalletEmu();
                 return;
         }
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         KWalletIf walletIf(this);
         if (walletIf.kwalletExport(curDoc())) {
                 KMessageBox::information(this,
                                          i18n("Successfully exported the data of the current "
                                               "document to KWallet."),
                                          i18n("Successfully exported data."));
                 showStatMsg(i18n("Successfully exported data."));
         }
         init->initKWalletEmu();
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 #endif // CONFIG_KWALLETIF
 }
 
 bool PwM::importFromGpasman()
 {
         if (!isVirgin()) {
                 if (KMessageBox::questionYesNo(this,
                                                i18n("Do you want to import the data\n"
                                                     "into the current document? (If you\n"
                                                     "select \"no\", a new document will be\n"
                                                     "opened.)"),
                                                i18n("import into this document?"))
                     == KMessageBox::No) {
                         // import the data to a new window.
                         PwM *newInstance = init->createMainWnd();
                         bool ok = newInstance->importFromGpasman();
                         if (!ok) {
                                 newInstance->setForceQuit(true);
                                 delete_and_null(newInstance);
                         }
                         return ok;
                 }
         }
 
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         PwMerror ret;
         QString path(KFileDialog::getOpenFileName(QString::null,
                                                   i18n("*|Gpasman or Kpasman file"), this));
         if (path == "")
                 goto cancelImport;
         ret = curDoc()->importFromGpasman(&path);
         if (ret == e_wrongPw) {
                 if (KMessageBox::questionYesNo(this,
                                                 i18n
                                                ("This is probably the wrong master-password\n"
                                                 "you have typed in.\n"
                                                 "There is no real way to determine the\n"
                                                 "correctness of the password in the Gpasman\n"
                                                 "file-format. But I think this\n"
                                                 "password ist wrong.\n"
                                                 "Do you want to continue nevertheless?"),
                                                i18n("password error"))
                     == KMessageBox::No) {
                         goto cancelImport;
                 }
         } else if (ret != e_success) {
                 KMessageBox::error(this,
                                    i18n("Could not import file!\n"
                                         "Do you have permission to read this file?"),
                                    i18n("import failed"));
                 goto cancelImport;
         }
         setVirgin(false);
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
         return true;
 
 cancelImport:
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
         return false;
 }
 
 #ifdef CONFIG_KWALLETIF
 bool PwM::checkAndAskForKWalletEmu()
 {
         if (init->kwalletEmu()) {
                 /* KWallet emulation is enabled. We can't import/export
                  * data from/to it, while emulation is active.
                  */
                 if (KMessageBox::questionYesNo(this,
                                                i18n("KWallet emulation is enabled.\n"
                                                     "You can't import or export data from/to "
                                                     "the original KWallet, while the emulation "
                                                     "is active.\n"
                                                     "Do you want to tempoarly disable the KWallet emulation?"),
                                                i18n("Tempoarly disable KWallet emulation?"))
                     == KMessageBox::Yes) {
                         init->initKWalletEmu(true);
                         PWM_ASSERT(!init->kwalletEmu());
                         return true;
                 }
                 return false;
         }
         return true;
 }
 #endif // CONFIG_KWALLETIF
 
 bool PwM::importKWallet()
 {
 #ifdef CONFIG_KWALLETIF
         if (!checkAndAskForKWalletEmu())
                 return false;
         KWalletIf walletIf(this);
         if (!isVirgin()) {
                 if (KMessageBox::questionYesNo(this,
                                                i18n("Do you want to import the data "
                                                     "into the current document? (If you "
                                                     "select \"no\", a new document will be "
                                                     "opened.)"),
                                                i18n("import into this document?"))
                     == KMessageBox::No) {
                         // import the data to a new window.
                         PwM *newInstance = init->createMainWnd();
                         bool ok = newInstance->importKWallet();
                         if (!ok) {
                                 newInstance->setForceQuit(true);
                                 delete_and_null(newInstance);
                                 goto exit_fail;
                         } else {
                                 goto exit_ok;
                         }
                 }
         }
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         if (!walletIf.kwalletImport(curDoc())) {
                 curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                 showStatMsg(i18n("KWallet import failed"));
                 goto exit_fail;
         }
         KMessageBox::information(this,
                                  i18n("Successfully imported the KWallet data "
                                       "into the current document."),
                                  i18n("successfully imported"));
         showStatMsg(i18n("successfully imported"));
         setVirgin(false);
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 
 exit_ok:
         init->initKWalletEmu();
         return true;
 
 exit_fail:
         init->initKWalletEmu();
 #endif // CONFIG_KWALLETIF
         return false;
 }
 
 void PwM::print_slot()
 {
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
 #ifndef PWM_EMBEDDED
         PwMPrint p(curDoc(), this);
         p.printNow();
 #else
         qDebug("PwM::print_slot , PRINTING IS NOT IMPLEMENTED");
 #endif
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 void PwM::genNewCard_slot()
 {
 #ifdef CONFIG_KEYCARD
         init->keycard()->genNewCard();
 #endif
 }
 
 void PwM::eraseCard_slot()
 {
 #ifdef CONFIG_KEYCARD
         init->keycard()->eraseCard();
 #endif
 }
 
 void PwM::readCardId_slot()
 {
 #ifdef CONFIG_KEYCARD
         init->keycard()->displayKey();
 #endif
 }
 
 void PwM::makeCardBackup_slot()
 {
 #ifdef CONFIG_KEYCARD
         init->keycard()->makeBackupImage();
 #endif
 }
 
 void PwM::replayCardBackup_slot()
 {
 #ifdef CONFIG_KEYCARD
         init->keycard()->replayBackupImage();
 #endif
 }
 
 void PwM::execLauncher_slot()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDeepLocked())
                 return;
         unsigned int curEntryIndex;
         if (!view->getCurEntryIndex(&curEntryIndex))
                 return;
         bool ret = curDoc()->execLauncher(view->getCurrentCategory(),
                                           curEntryIndex);
         if (ret)
                 showStatMsg(i18n("Executed the \"Launcher\"."));
         else
                 showStatMsg(i18n("ERROR: Couldn't execute the \"Launcher\"!"));
 }
 
 void PwM::goToURL_slot()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDeepLocked())
                 return;
         unsigned int curEntryIndex;
         if (!view->getCurEntryIndex(&curEntryIndex))
                 return;
         bool ret = curDoc()->goToURL(view->getCurrentCategory(),
                                      curEntryIndex);
         if (ret)
                 showStatMsg(i18n("started browser with current URL."));
         else
                 showStatMsg(i18n("ERROR: Couldn't start browser! Maybe invalid URL?"));
 }
 
 void PwM::copyToClipboard(const QString &s)
 {
         QClipboard *cb = QApplication::clipboard();
 #ifndef PWM_EMBEDDED
         if (cb->supportsSelection())
                 cb->setText(s, QClipboard::Selection);
         cb->setText(s, QClipboard::Clipboard);
 #else
         cb->setText(s);
 
 #endif
 
 }
 
 
 void PwM::showStatMsg(const QString &msg)
 {
 #ifdef DESKTOP_VERSION
         statusBar()->message(msg, STATUSBAR_MSG_TIMEOUT * 1000);
 #else
-        qDebug("Statusbar : %s",msg.latin1());
+        //qDebug("Statusbar : %s",msg.latin1());
     Global::statusMessage(msg);
 #endif
 }
 
 void PwM::focusInEvent(QFocusEvent *e)
 {
         if (e->gotFocus()) {
                 emit gotFocus(this);
         } else if (e->lostFocus()) {
                 emit lostFocus(this);
         }
 }
 
 
 #ifdef PWM_EMBEDDED
 
 void PwM::category_slot()
 {
         PwMDoc *doc = curDoc();
         PWM_ASSERT(doc);
         doc->timer()->getLock(DocTimer::id_autoLockTimer);
 
         editCategoryWnd w(doc, this, "editcategory");
 /*
         vector<string> catList;
         doc->getCategoryList(&catList);
         unsigned i, size = catList.size();
         for (i = 0; i < size; ++i) {
                 w.addCategory(catList[i].c_str());
         }
         w.setCurrCategory(view->getCurrentCategory());
         if (pw)
                 w.pwLineEdit->setText(*pw);
 */
         w.setCurrCategory(view->getCurrentCategory());
 
       tryAgain:
         if (w.exec() == 1) 
           {
                 PwMDataItem d;
 
                 //US BUG: to initialize all values of curEntr with meaningfulldata,
                 // we call clear on it. Reason: Metadata will be uninitialized otherwise.
                 // another option would be to create a constructor for PwMDataItem
                 d.clear(true);
                 /*
                 d.desc = w.getDescription().latin1();
                 d.name = w.getUsername().latin1();
                 d.pw = w.getPassword().latin1();
                 d.comment = w.getComment().latin1();
                 d.url = w.getUrl().latin1();
                 d.launcher = w.getLauncher().latin1();
                 PwMerror ret = doc->addEntry(w.getCategory(), &d);
                 if (ret == e_entryExists) {
                         KMessageBox::error(this,
                                            i18n
                                            ("An entry with this \"Description\",\n"
                                             "does already exist.\n"
                                             "Please select another description."),
                                            i18n("entry already exists."));
                         goto tryAgain;
                 } else if (ret == e_maxAllowedEntr) {
                         KMessageBox::error(this, i18n("The maximum possible number of\nentries"
                                                       "has been reached.\nYou can't add more entries."),
                                                  i18n("maximum number of entries"));
                         doc->timer()->putLock(DocTimer::id_autoLockTimer);
                         return;
                 }
                 */
         }
         setVirgin(false);
         doc->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 
 void PwM::whatsnew_slot()
 {
     KApplication::showFile( "KDE-Pim/Pi Version Info", "kdepim/WhatsNew.txt" );
 }
 
 void PwM::showLicense_slot()
 {
     KApplication::showLicence();
 }
 
 void PwM::faq_slot()
 {
   KApplication::showFile( "PWM/Pi FAQ", "kdepim/pwmanager/pwmanagerFAQ.txt" );
 }
 
 void PwM::syncHowTo_slot()
 {
     KApplication::showFile( "KDE-Pim/Pi Synchronization HowTo", "kdepim/SyncHowto.txt" );
 }
 
 
 void PwM::createAboutData_slot()
 {
   QString version;
 #include <../version>
 ;
     QMessageBox::about( this, "About PwManager/Pi",
                         "PwManager/Platform-independent\n"
                         "(PWM/Pi) " +version + " - " +
 #ifdef DESKTOP_VERSION
                         "Desktop Edition\n"
 #else
                         "PDA-Edition\n"
                         "for: Zaurus 5500 / 7x0 / 8x0\n"
 #endif
 
                         "(c) 2004 Ulf Schenk\n"
                         "(c) 2004 Lutz Rogowski\n"
                         "(c) 1997-2004, The KDE PIM Team\n"
 
         "(c) Michael Buesch - main programming\nand current maintainer\nmbuesch@freenet.de\n"
         "Matt Scifo - mscifo@o1.com\n"
         "Elias Probst - elias.probst@gmx.de\n"
         "George Staikos - staikos@kde.org\n"
         "Matthew Palmer - mjp16@uow.edu.au\n"
         "Olivier Sessink - gpasman@nl.linux.org\n"
         "The libgcrypt developers -\nBlowfish and SHA1 algorithms\nftp://ftp.gnupg.org/gcrypt/alpha/libgcrypt/\n"
         "Troy Engel - tengel@sonic.net\n"
         "Wickey - wickey@gmx.at\n"
         "Ian MacGregor - original documentation author.\n"
  );
 }
 
 
 //this are the overwritten callbackmethods from the syncinterface
 bool PwM::sync(KSyncManager* manager, QString filename, int mode)
 {
   PWM_ASSERT(curDoc());
 
   bool ret =  curDoc()->sync(manager, filename, mode);
 
   qDebug("PwM::sync save now: ret=%i", ret);
  
   if (ret == true) {
     //US BUG: what can we call here to update the view of the current doc?
     //mViewManager->refreshView();
 
     //US curDoc()->sync sets the dirtyFlag in case the sync was successfull.
     save();
   }
 
   return ret;
 }
  
 void PwM::removeSyncInfo( QString syncProfile)
 {
     qDebug("PWM:removeSyncInfo for profile %s ", syncProfile.latin1());
     curDoc()->removeSyncInfo( syncProfile );
     //US curDoc()->removeSyncInfo sets the dirtyFlag.
 }
 
 #endif
 
 
 #ifndef PWM_EMBEDDED
 #include "pwm.moc"
 #endif
diff --git a/pwmanager/pwmanager/pwminit.cpp b/pwmanager/pwmanager/pwminit.cpp
index 0cf248c..d59d4d8 100644
--- a/pwmanager/pwmanager/pwminit.cpp
+++ b/pwmanager/pwmanager/pwminit.cpp
@@ -1,661 +1,661 @@
 /***************************************************************************
  *                                                                         *
  *   copyright (C) 2004 by Michael Buesch                                  *
  *   email: mbuesch@freenet.de                                             *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License version 2        *
  *   as published by the Free Software Foundation.                         *
  *                                                                         *
  ***************************************************************************/
 
 /***************************************************************************
  * copyright (C) 2004 by Ulf Schenk
  * This file is originaly based on version 1.0.1 of pwmanager
  * and was modified to run on embedded devices that run microkde
  *
  * $Id$
  **************************************************************************/  
 
 #include "pwminit.h"
 #include "randomizer.h"
 #include <qdir.h>
 
 #ifndef PWM_EMBEDDED
 #include "selftest.h"
 #include "configuration.h"
 #else
 #include "pwmprefs.h"
 #endif
 
 #include "pwm.h"
 #include "pwmexception.h"
 #include "pwmtray.h"
 #include "pwmdoc.h"
 
 #ifdef CONFIG_KWALLETIF
 # include "kwalletemu.h"
 #endif // CONFIG_KWALLETIF
 #ifdef CONFIG_KEYCARD
 # include "pwmkeycard.h"
 #endif // CONFIG_KEYCARD
 
 #include <qmessagebox.h>
 
 #include <kmessagebox.h>
 #ifndef PWM_EMBEDDED
 #include <kcmdlineargs.h>
 #include <kwin.h>
 #include <dcopclient.h>
 #endif
 
 #include <kapplication.h>
 #include <kiconloader.h>
 
 #include <signal.h>
 
 static PwMInit *sig_init_pointer;
 #ifdef _WIN32_
 static void sig_handler(int signum)
 #else
 static NOREGPARM void sig_handler(int signum)
 #endif
 {
         switch (signum) {
                 case SIGINT:
                 case SIGTERM:
                         sig_init_pointer->shutdownApp(20 + signum);
                         break;
                 default:
                         printDebug(string("unhandled signal ")
                                    + tostr(signum));
         }
 }
 
 
 
 PwMInit::PwMInit(PwMApplication *_app)
  : runStatus (unknown)
  , _curWidget (0)
  , _dcopClient (0)
  , _kwalletEmu (0)
  , _keycard (0)
  , _tray (0)
 {
         sig_init_pointer = this;
         app = _app;
 }
 
 PwMInit::~PwMInit()
 {
-    qDebug("PwMInit::~PwMInit() ");
+    //qDebug("PwMInit::~PwMInit() ");
 #ifndef PWM_EMBEDDED
         SelfTest::cancel();
         // close all open mainwnds
         QValueList<PwM *>::iterator i = _mainWndList.begin(),
                                     end = _mainWndList.end();
 
 #else
         // close all open mainwnds
         QValueList<PwM *>::Iterator i = _mainWndList.begin(),
                                     end = _mainWndList.end();
 #endif
         while (i != end) {
                 disconnect(*i, SIGNAL(closed(PwM *)),
                            this, SLOT(mainWndClosed(PwM *)));
                 delete *i;
                 ++i;
         }
         _mainWndList.clear();
         // close all remaining open documents
         PwMDocList *_dl = PwMDoc::getOpenDocList();
         vector<PwMDocList::listItem> dl = *(_dl->getList());
         vector<PwMDocList::listItem>::iterator i2 = dl.begin(),
                                                end2 = dl.end();
         while (i2 != end2) {
                 delete (*i2).doc;
                 ++i2;
         }
 
 #ifdef CONFIG_KWALLETIF
         delete_ifnot_null(_kwalletEmu);
 #endif // CONFIG_KWALLETIF
 #ifdef CONFIG_KEYCARD
         delete_ifnot_null(_keycard);
 #endif // CONFIG_KEYCARD
         delete_ifnot_null(_tray);
 
         Randomizer::cleanup();
 #ifndef PWM_EMBEDDED
         Configuration::cleanup();
 #endif
 }
 
 void PwMInit::initializeApp()
 {
     //qDebug("PwMInit::initializeApp() ");
         PWM_ASSERT(runStatus == unknown);
         runStatus = init;
         initPosixSignalHandler();
         Randomizer::init();
 #ifndef PWM_EMBEDDED
         Configuration::init();
 #endif
         initDCOP();
         initKWalletEmu();
         initKeycard();
         initTray();
         handleCmdLineArgs();
         bool openDeeplocked = false;
         if (conf()->confGlobAutostartDeepLocked() ||
             savedCmd.open_deeplocked)
                 openDeeplocked = true;
     if ( false ){
     // LR is not working
         //if (conf()->confWndAutoMinimizeOnStart() ||
     //   savedCmd.minToTray) {
                 PwMDoc *newDoc = createDoc();
-        qDebug("  createDoc()");
+        //qDebug("  createDoc()");
                 if (!newDoc->openDocUi(newDoc,
                                        conf()->confGlobAutoStart(),
                                        openDeeplocked)) {
                         delete newDoc;
         }
 
                         //US ENH for embedded devices: in the case of failure, open a document the default way  
                         createMainWnd(conf()->confGlobAutoStart(),
                               openDeeplocked,
                               true,
                               0,
                               savedCmd.minimized);
                         
 
 
 
                     //}
         } else {
                 createMainWnd(conf()->confGlobAutoStart(),
                               openDeeplocked,
                               true,
                               0,
                               savedCmd.minimized);
         }
         runStatus = running;
 }
 
 void PwMInit::shutdownApp(int exitStatus)
 {
 
 
         PwM * iii;;
         while ( _mainWndList.count() ) {
         iii = _mainWndList.first();
         disconnect(iii, SIGNAL(closed(PwM *)),
                    this, SLOT(mainWndClosed(PwM *)));
         mainWndClosed((iii));
     }
 
         printDebug(string("PwMInit::shutdownApp(")
                    + tostr(exitStatus) + ") called.");
         PWM_ASSERT((runStatus == running) || (runStatus == init));
         runStatus = shutdown;
         QApplication::exit(exitStatus);
         /* The destructor of PwMInit is called when control
          * leaves main()
          */
 }
 
 void PwMInit::initPosixSignalHandler()
 {
         signal(SIGINT, sig_handler);
         signal(SIGTERM, sig_handler);
 }
 
 void PwMInit::initDCOP()
 {
 #ifndef PWM_EMBEDDED
         _dcopClient = app->dcopClient();
         _dcopClient->setNotifications(true);
 #endif
 
 }
 
 void PwMInit::initKWalletEmu(bool forceDisable, bool forceReload)
 {
 #ifdef CONFIG_KWALLETIF
         if (!conf()->confGlobKwalletEmu() ||
             forceDisable) {
                 delete_ifnot_null(_kwalletEmu);
                 return;
         }
         try {
                 if (_kwalletEmu && forceReload)
                         delete_and_null(_kwalletEmu);
                 if (!_kwalletEmu)
                         _kwalletEmu = new KWalletEmu(this);
         } catch (PwMException e) {
                 string errMsg("initializing KWallet emulation failed.  ID: ");
                 errMsg += tostr(static_cast<int>(e.getId()));
                 errMsg += "  err-message: ";
                 errMsg += e.getMessage();
                 printWarn(errMsg);
                 return;
         }
 #else // CONFIG_KWALLETIF
         PARAM_UNUSED(forceDisable);
         PARAM_UNUSED(forceReload);
 #endif // CONFIG_KWALLETIF
 }
 
 void PwMInit::initKeycard()
 {
 #ifdef CONFIG_KEYCARD
         PWM_ASSERT(!_keycard);
         _keycard = new PwMKeyCard(this);
 #endif // CONFIG_KEYCARD
 }
 
 void PwMInit::initTray()
 {
 #ifdef PWM_EMBEDDED
   //US ENH : embedded version does not support a tray
   return;
 #endif
 
         if (!conf()->confGlobTray()) {
                 if (!_tray)
                         return;
                 _tray->hide();
                 delete_and_null(_tray);
                 return;
         }
         if (_tray)
                 return;
         _tray = new PwMTray(this);
         connect(_tray, SIGNAL(quitSelected()),
                 this, SLOT(removeTrayAndQuit()));
         connect(_tray, SIGNAL(closed(PwMTray *)),
                 this, SLOT(trayIconClosed(PwMTray *)));
         KIconLoader icons;
 #ifndef PWM_EMBEDDED
         _tray->setPixmap(icons.loadIcon(PACKAGE_NAME, KIcon::Small));
 #endif
         _tray->show();
         // connect the signals of all open documents.
         const vector<PwMDocList::listItem> *dl = PwMDoc::getOpenDocList()->getList();
         vector<PwMDocList::listItem>::const_iterator i = dl->begin(),
                                                      end = dl->end();
         while (i != end) {
                 _tray->connectDocToTray((*i).doc);
                 ++i;
         }
 }
 
 void PwMInit::removeTrayAndQuit()
 {
         PWM_ASSERT(_tray);
         // _tray is deleted in ~PwMInit
         shutdownApp(0);
 }
 
 PwM * PwMInit::createMainWnd(const QString &loadFile,
                              bool loadFileDeepLocked,
                              bool virginity,
                              PwMDoc *doc,
                              bool minimized)
 {
         PwM *newWnd;
         if (!doc)
                 doc = createDoc();
         newWnd = new PwM(this, doc, virginity);
 #ifndef PWM_EMBEDDED
         _mainWndList.push_back(newWnd);
 #else
         _mainWndList.append(newWnd);
 #endif
         connect(newWnd, SIGNAL(closed(PwM *)),
                 this, SLOT(mainWndClosed(PwM *)));
         connect(newWnd, SIGNAL(gotFocus(PwM *)),
                 this, SLOT(setCurWidget(PwM *)));
         connect(newWnd, SIGNAL(lostFocus(PwM *)),
                 this, SLOT(resetCurWidget()));
 
         //US ENH
 #ifndef PWM_EMBEDDED
         if (minimized)
                 newWnd->showMinimized();
         else
                 newWnd->show();
 
 #else //PWM_EMBEDDED
 
 #ifndef DESKTOP_VERSION
        app->showMainWidget( newWnd );
 #else //DESKTOP_VERSION
        newWnd->resize (640, 480 );
        newWnd->show();
 #endif //DESKTOP_VERSION
 
 #endif //PWM_EMBEDDED
 
         if (loadFile != QString::null &&
             loadFile != "") {
                 newWnd->openDoc(loadFile, loadFileDeepLocked);
         }
         return newWnd;
 }
 
 PwMDoc * PwMInit::createDoc()
 {
         PwMDoc *doc = new PwMDoc(this);
 #ifdef CONFIG_KEYCARD
         doc->setPwMKeyCard(keycard());
 #endif
 #ifdef CONFIG_KWALLETIF
         if (kwalletEmu())
                 kwalletEmu()->connectDocSignals(doc);
 #endif
 
         if (_tray)
                 _tray->connectDocToTray(doc);
 
         return doc;
 
 }
 
 void PwMInit::mainWndClosed(PwM *wnd)
 {
         bool doMinimizeToTray = false;
         bool doDeleteDoc = false;
 #ifndef PWM_EMBEDDED
         dcopClient()->suspend();
         dcopClient()->setAcceptCalls(false);
 #endif
 again:
 
         if (wnd->isForceMinimizeToTray()) {
                 if (unlikely(!_tray)) {
                         /* This should not happen! If we set forceMinimizeToTray ,
                          * we must be sure that _tray exists.
                          */
                         BUG();
                         wnd->setForceMinimizeToTray(false);
                         goto again;
                 }
                 doMinimizeToTray = true;
         } else {
           // Ask to minimize to tray. If not, delete doc.
                 if (_tray &&
                     runStatus != shutdown &&
                     !wnd->isForceQuit() &&
                     !wnd->curDoc()->isDeleted()) {
                             if (conf()->confWndClose())
                                 doDeleteDoc = true;
                         else
                                 doMinimizeToTray = true;
                 } else {
                         doDeleteDoc = true;
                 }
         }
 
         if (doMinimizeToTray) {
-        qDebug("doMinimizeToTray ");
+        //qDebug("doMinimizeToTray ");
                 PWM_ASSERT(_tray);
                 int mmlock = conf()->confGlobMinimizeLock();
                 switch (mmlock) {
                         case 0:         // don't lock anything
                         break;
                         case 1:         // normal lock
                         wnd->curDoc()->lockAll(true);
                         break;
                         case 2:         // deep-lock
                         wnd->curDoc()->deepLock();
                         break;
                 default:
                         WARN();
                 }
         } else if (doDeleteDoc) {
-        qDebug("doDeleteDoc ");
+        //qDebug("doDeleteDoc ");
                 if (!wnd->curDoc()->tryDelete()) {
                         /* We failed deleting the doc,
                          * so open a new window with it, again.
                          */
                         createMainWnd(QString::null, false,
                                       false, wnd->curDoc());
                 }
         }
 #ifndef PWM_EMBEDDED
         // find the closed window in the "mainWndList" and delete it.
         QValueList<PwM *>::iterator i = _mainWndList.begin(),
                                     end = _mainWndList.end();
 #else
         // find the closed window in the "mainWndList" and delete it.
         QValueList<PwM *>::Iterator i = _mainWndList.begin(),
                                     end = _mainWndList.end();
 #endif
         while (i != end) {
         //qDebug("iii %x  end %x  wnd %x",  (*i), (*end), wnd);
                 if (*i == wnd) {
 #ifndef PWM_EMBEDDED
                         _mainWndList.erase(i);
 #else
                         _mainWndList.remove(i);
 #endif
          
             if ( app->mainWidget() == wnd ) {
                 if (  _mainWndList.count() ) {
 #ifndef DESKTOP_VERSION
                     app->showMainWidget(_mainWndList.first() );
 #endif //DESKTOP_VERSION
                    
                 }
             }
             delete wnd;
                         goto out_success;
                 }
                 ++i;
         }
         BUG();
 out_success:
 #ifndef PWM_EMBEDDED
         if (!_mainWndList.size()) 
 #else
         if (!_mainWndList.count()) 
 #endif
 
           {
                 /* If there's no main window and no tray icon
                  * left, we have no user interface, so we can
                  * shut down the application.
                  */
                 if (!_tray) {
 #ifndef PWM_EMBEDDED
                         dcopClient()->setAcceptCalls(true);
                         dcopClient()->resume();
 #endif
                         shutdownApp(0);
                         return;
                 }
                 /* There is no widget left, so set
                  * _curWidget to 0
                  */
                 resetCurWidget();
         }
 #ifndef PWM_EMBEDDED
         dcopClient()->setAcceptCalls(true);
         dcopClient()->resume();
 #endif
 }
 
 void PwMInit::trayIconClosed(PwMTray *tray)
 {
         if (runStatus != running)
                 return;
         PARAM_UNUSED(tray);
         PWM_ASSERT(tray == _tray);
         /* If there's no main wnd left we have to
          * shutdown the app (same as in mainWndClosed())
          */
 #ifndef PWM_EMBEDDED
         if (!_mainWndList.size())
                 shutdownApp(0);
 #else
         if (!_mainWndList.count())
                 shutdownApp(0);
 #endif
 }
 
 void PwMInit::handleCmdLineArgs(bool initial)
 {
 #ifndef PWM_EMBEDDED
         KCmdLineArgs *args = KCmdLineArgs::parsedArgs();
         PWM_ASSERT(args);
         int i, numArgs = args->count();
         const char *curArg;
 
         // read all cmdline options
         savedCmd.open_deeplocked = args->isSet("open-deeplocked");
         savedCmd.minimized = args->isSet("minimized");
         savedCmd.minToTray = args->isSet("mintray");
         savedCmd.skipSelfTest = args->isSet("skip-self-test");
         if (savedCmd.minimized &&
             savedCmd.minToTray) {
                 printInfo(i18n("Commandline option \"--minimized\" and "
                                "\"--mintray\" selected. These are incompatible. "
                                "\"--mintray\" will be selected.").latin1());
         }
         /* Iterate through all non-option arguments.
          * Every non-option arg is a filename to open.
          */
         for (i = 0; i < numArgs; ++i) {
                 curArg = args->arg(i);
                 PWM_ASSERT(curArg);
                 if (savedCmd.minToTray) {
                         PwMDoc *newDoc = createDoc();
                         if (!newDoc->openDocUi(newDoc,
                                                curArg,
                                                savedCmd.open_deeplocked)) {
                                 delete newDoc;
                         }
                 } else {
                         PwM *newInstance = createMainWnd(QString::null,
                                                          false,
                                                          true,
                                                          0,
                                                          savedCmd.minimized);
                         PwMDoc *newDoc = newInstance->openDoc(curArg,
                                                               savedCmd.open_deeplocked);
                         if (!newDoc) {
                                 newInstance->setForceQuit(true);
                                 delete_and_null(newInstance);
                         }
                 }
         }
 
         if (savedCmd.minToTray) {
                 minimizeAllMainWnd(true);
         } else if (savedCmd.minimized) {
                 minimizeAllMainWnd(false);
         }
         if (!savedCmd.skipSelfTest && initial) {
                 SelfTest::schedule();
         }
         args->clear();
 #endif
 }
 
 void PwMInit::minimizeAllMainWnd(bool toTray)
 {
 #ifndef PWM_EMBEDDED
         if (!_mainWndList.size())
                 return;
 #else
         if (!_mainWndList.count())
                 return;
 #endif
         const QValueList<PwM *> *ml = mainWndList();
 #ifndef PWM_EMBEDDED
         QValueList<PwM *>::const_iterator it = ml->begin(),
                                           end = ml->end();
 #else
         QValueList<PwM *>::ConstIterator it = ml->begin(),
                                           end = ml->end();
 #endif
         PwM *wnd;
         if (toTray && _tray) {
                 /* minimize to tray.
                  * close all mainWnd.
                  */
                 while (it != end) {
                         wnd = *it;
                         wnd->setForceMinimizeToTray(true);
                         wnd->close_slot();
                         ++it;
                 }
         } else {
                 // normal minimize
                 while (it != end) {
                         wnd = *it;
                         wnd->hide();
                         wnd->showMinimized();
                         ++it;
                 }
         }
 }
 
 #ifdef PWM_EMBEDDED
 
 #ifndef DESKTOP_VERSION
 
 PwMApplication::PwMApplication(int & argc, char ** argv) 
     : QPEApplication( argc, argv )
     , init (0)
 {
      this->setKeepRunning ();
 }
         
 PwMApplication::~PwMApplication()
 {
   delete_ifnot_null(init);
 }
 #else //DESKTOP_VERSION
 
 PwMApplication::PwMApplication(int & argc, char ** argv)
            : QApplication( argc, argv )
           , init (0)
 { 
   setStyle( new QPlatinumStyle ());
   QString hdir = QDir::homeDirPath();
   // there is a bug when creating dirs for WIN 98
   // it is difficult to fix, because we have no WIN 98 runnung
   // such that we try it to create the dirs at startup here
   if ( hdir == "C:\\" )
     {
       // win 98 or ME
     QDir app_dir;
     if ( !app_dir.exists("C:\\kdepim") )
       app_dir.mkdir ("C:\\kdepim");
     if ( !app_dir.exists("C:\\kdepim\\apps") )
       app_dir.mkdir ("C:\\kdepim\\apps");
     if ( !app_dir.exists("C:\\kdepim\\config") )
       app_dir.mkdir ("C:\\kdepim\\config");
     if ( !app_dir.exists("C:\\kdepim\\apps\\pwmanager") )
       app_dir.mkdir ("C:\\kdepim\\apps\\pwmanager");
     }
 }
 
 PwMApplication::~PwMApplication()
 {
   delete_ifnot_null(init);
 }
 
 #endif //DESKTOP_VERSION
 
 #endif //PWM_EMBEDDED
 
 
 
 
 #ifndef PWM_EMBEDDED
 #include "pwminit.moc"
 #endif
diff --git a/pwmanager/pwmanager/pwmview.cpp b/pwmanager/pwmanager/pwmview.cpp
index cd816e5..8c4d9cc 100644
--- a/pwmanager/pwmanager/pwmview.cpp
+++ b/pwmanager/pwmanager/pwmview.cpp
@@ -1,620 +1,620 @@
 /***************************************************************************
  *                                                                         *
  *   copyright (C) 2003, 2004 by Michael Buesch                            *
  *   email: mbuesch@freenet.de                                             *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License version 2        *
  *   as published by the Free Software Foundation.                         *
  *                                                                         *
  ***************************************************************************/
 
 /***************************************************************************
  * copyright (C) 2004 by Ulf Schenk
  * This file is originaly based on version 1.0.1 of pwmanager
  * and was modified to run on embedded devices that run microkde
  *
  * $Id$
  **************************************************************************/  
 
 #include "pwmview.h"
 #include "pwmexception.h"
 #include "globalstuff.h"
 #include "pwm.h"
 #include "rencatwnd.h"
 #ifndef PWM_EMBEDDED
 #include "configuration.h"
 #else
 #include "pwmprefs.h"
 #endif
 #include "commentbox.h"
 
 #include <kmessagebox.h>
 #include <klocale.h>
 
 #include <qlineedit.h>
 #include <qpoint.h>
 #include <qapplication.h>
 #include <qlayout.h>
 
 //US ENH: wouldn't it be a good idea if we could use this consts everywhere else.
 //US ENH: for examle in listviewpwm.cpp
 //US ENH: Because of that I transfer them into the headerfile.
 /*
         #define COLUMN_DESC     0
         #define COLUMN_NAME     1
         #define COLUMN_PW       2
         #define COLUMN_URL      3
         #define COLUMN_LAUNCHER         4
 */
 
 PwMView::PwMView(PwM *_mainClass,
                  QWidget *parent, PwMDoc *_doc,
                  const char *name)
  : PwMViewStyle(parent, name)
 {
         PWM_ASSERT(_mainClass);
         PWM_ASSERT(parent);
         PWM_ASSERT(_doc);
         setView(this);
         doc = _doc;
         doc->setListViewPointer(this);
         mainClass = _mainClass;
         resize(_mainClass->size());
         initStyle(conf()->confWndMainViewStyle());
         initCtxMenu();
         doc->setCurrentView(this);
         connect(doc, SIGNAL(dataChanged(PwMDoc *)), this, SLOT(updateView()));
 }
 
 PwMView::~PwMView()
 {
 }
 
 void PwMView::initCtxMenu()
 {
         ctxMenu = new QPopupMenu(this);
         ctxMenu->insertItem(i18n("&Add password"), mainClass, SLOT(addPwd_slot()));
         ctxMenu->insertSeparator();
         ctxMenu->insertItem(i18n("&Edit"), mainClass, SLOT(editPwd_slot()));
         ctxMenu->insertItem(i18n("&Delete"), mainClass, SLOT(deletePwd_slot()));
         ctxMenu->insertSeparator();
         ctxMenu->insertItem(i18n("copy password to clipboard"),
                             this, SLOT(copyPwToClip()));
         ctxMenu->insertItem(i18n("copy username to clipboard"),
                             this, SLOT(copyNameToClip()));
         ctxMenu->insertItem(i18n("copy description to clipboard"),
                             this, SLOT(copyDescToClip()));
         ctxMenu->insertItem(i18n("copy url to clipboard"),
                             this, SLOT(copyUrlToClip()));
         ctxMenu->insertItem(i18n("copy launcher to clipboard"),
                             this, SLOT(copyLauncherToClip()));
         ctxMenu->insertItem(i18n("copy comment to clipboard"),
                             this, SLOT(copyCommentToClip()));
         ctxMenu->insertSeparator();
         ctxMenu->insertItem(i18n("Execute \"Launcher\""), mainClass,
                             SLOT(execLauncher_slot()));
         ctxMenu->insertItem(i18n("Go to \"URL\""), mainClass,
                             SLOT(goToURL_slot()));
 }
 
 void PwMView::resizeEvent(QResizeEvent *)
 {
         resizeView(size());
 }
 
 void PwMView::refreshCommentTextEdit(QListViewItem *curItem)
 {
         PWM_ASSERT(commentBox);
         if (!curItem)
                 return;
         string comment;
         PwMerror ret;
         ret = document()->getCommentByLvp(getCurrentCategory(),
                                           lv->childCount() - lv->itemIndex(curItem) - 1,
                                           &comment);
         if (ret == e_binEntry) {
                 commentBox->setContent(i18n("This is a binary entry.\n"
                                             "It is not a normal password-entry, as it contains "
                                             "binary data, which PwManager can't display here."));
         } else if (ret == e_normalEntry) {
                 commentBox->setContent(comment.c_str());
         } else {
                 BUG();
                 return;
         }
         lv->ensureItemVisible(curItem);
 }
 
 void PwMView::keyReleaseEvent(QKeyEvent * /*e*/)
 {
         refreshCommentTextEdit(lv->currentItem());
 }
 
 bool PwMView::getCurEntryIndex(unsigned int *index)
 {
         QListViewItem *current = lv->currentItem();
         if (!current)
                 return false;
         return getDocEntryIndex(index, current);
 }
 
 bool PwMView::getDocEntryIndex(unsigned int *index,
                                const QListViewItem *item)
 {
         vector<unsigned int> foundPositions;
         PwMDataItem curItem;
         curItem.desc = item->text(COLUMN_DESC).latin1();
         curItem.name = item->text(COLUMN_NAME).latin1();
         document()->getCommentByLvp(getCurrentCategory(),
                                     lv->childCount() - lv->itemIndex(item) - 1,
                                     &curItem.comment);
         curItem.url = item->text(COLUMN_URL).latin1();
         curItem.launcher = item->text(COLUMN_LAUNCHER).latin1();
         document()->findEntry(getCurrentCategory(), curItem, SEARCH_IN_DESC |
                               SEARCH_IN_NAME | SEARCH_IN_COMMENT | SEARCH_IN_URL |
                               SEARCH_IN_LAUNCHER,
                               &foundPositions, true);
         if (foundPositions.size()) {
                 *index = foundPositions[0];
                 return true;
         }
 
         return false;
 }
 
 void PwMView::handleToggle(QListViewItem *item)
 {
         PWM_ASSERT(doc);
         if (!item)
                 return;
         QCheckListItem *clItem = (QCheckListItem *)item;
         QString curCat(getCurrentCategory());
 
         // find document position of this entry.
         unsigned int curEntryDocIndex;
         if (!getDocEntryIndex(&curEntryDocIndex, item))
                 return;
 
         // hack to refresh the comment, if only one item is present
         if (lv->childCount() == 1)
                 refreshCommentTextEdit(lv->currentItem());
 
         if (doc->isLocked(curCat, curEntryDocIndex) != clItem->isOn())
                         return;         // this is just a click somewhere on the entry
         if (doc->isDeepLocked()) {
                 PwMerror ret;
                 ret = doc->deepLock(false);
                 if (ret != e_success)
                         clItem->setOn(false);
                 return;
         }
         doc->lockAt(curCat, curEntryDocIndex, !clItem->isOn());
 }
 
 void PwMView::handleRightClick(QListViewItem *item, const QPoint &point, int)
 {
         if (!item)
                 return;
         ctxMenu->move(point);
         /* don't use ctxMenu->exec() here, as it generates race conditions
          * with the card interface code. Believe it or not. :)
          */
         ctxMenu->show();
 }
 
 void PwMView::updateCategories()
 {
-    qDebug("PwMView::updateCategories() ");
+    //qDebug("PwMView::updateCategories() ");
         QString oldSel(getCurrentCategory());
         delAllCategories();
         QStringList catList;
         document()->getCategoryList(&catList);
         catList.sort();
 #ifndef PWM_EMBEDDED
         QStringList::iterator i = catList.begin(),
                               end = catList.end();
 #else
         QStringList::Iterator i = catList.begin(),
                               end = catList.end();
 #endif
         while (i != end) {
                 addCategory(*i);
                 ++i;
         }
         selectCategory(oldSel);
 }
 
 void PwMView::shiftToView()
 {
         int cX = lv->contentsX();
         int cY = lv->contentsY();
         commentBox->clear();
 
         unsigned int catDocIndex;
         if (unlikely(
             !(document()->findCategory(getCurrentCategory(),
                                        &catDocIndex)))) {
                 BUG();
         }
 
         // ensure all listViewPos are set
         doc->ensureLvp();
 
         // clear all tmp-data vectors
         unsigned int i, entries = doc->numEntries(catDocIndex);
         if (entries) {
                 mainClass->setVirgin(false);
         }
         vector<PwMDataItem> tmpSorted;
         PwMDataItem currItem;
         currItem.clear();
         tmpSorted.insert(tmpSorted.begin(), entries, currItem);
 
         // Sort items and store them in tempoary tmpSorted.
         for (i = 0; i < entries; ++i) {
                 doc->getEntry(catDocIndex, i, &currItem);
                 //qDebug("PwMView::shiftToView: %s, %i", currItem.desc.c_str(), currItem.listViewPos);
                 tmpSorted[currItem.listViewPos] = currItem;
         }
 
         // shift tempoary data to ListView.
         tmpDisableSort();
         lv->clear();
 
         //US ENH: adjust the headers of the table according the category texts
         {
           PwMCategoryItem* catItem = doc->getCategoryEntry(catDocIndex);
                   //  qDebug("PwMView::ShiftToView CAT: %i, %s", catDocIndex, catItem->name.c_str());
           lv->setColumnText(COLUMN_DESC, catItem->desc_text.c_str());
           lv->setColumnText(COLUMN_NAME, catItem->name_text.c_str());
           lv->setColumnText(COLUMN_PW, catItem->pw_text.c_str());
         }
 
         QCheckListItem *newItem;
         vector<PwMDataItem>::iterator it = tmpSorted.begin(),
                                       end = tmpSorted.end();
         while (it != end) {
                 newItem = new ListViewItemPwM(lv);
                 newItem->setText(COLUMN_DESC, (*it).desc.c_str());
                 if ((*it).binary) {
                         newItem->setText(COLUMN_NAME, "");
                         newItem->setText(COLUMN_PW, i18n("<BINARY ENTRY>"));
                         newItem->setText(COLUMN_URL, "");
                         newItem->setText(COLUMN_LAUNCHER, (*it).launcher.c_str());
                 } else {
                         newItem->setText(COLUMN_NAME, (*it).name.c_str());
                         if ((*it).lockStat) {
                                 newItem->setText(COLUMN_PW, QString((*it).pw.c_str())
                                                  + " "
                                                  + i18n("To unlock click the icon on the left."));
                         } else {
                                 newItem->setText(COLUMN_PW, (*it).pw.c_str());
                         }
                         newItem->setText(COLUMN_URL, (*it).url.c_str());
                         newItem->setText(COLUMN_LAUNCHER, (*it).launcher.c_str());
                 }
                 newItem->setOn(!((*it).lockStat));
                 lv->insertItem(newItem);
                 ++it;
         }
         tmpReEnableSort();
 
         if (cY || cX)
                 lv->setContentsPos(cX, cY);
 }
 
 void PwMView::reorgLp()
 {
         if (!lv->childCount())
                 return;
         PWM_ASSERT(doc);
         PWM_ASSERT(!doc->isDocEmpty());
         QListViewItem *currItem;
         vector<unsigned int> foundPos;
         /* This searchIn _should_ be:
                  *const unsigned int searchIn = SEARCH_IN_DESC;
          * But we want backward compatibility (see comment in PwMDoc::addEntry()).
          * So we need to search again, if we don't find the entry. (see below)
          */
         const unsigned int searchIn = SEARCH_IN_DESC | SEARCH_IN_NAME |
                                       SEARCH_IN_URL | SEARCH_IN_LAUNCHER;
         QString curCat(getCurrentCategory());
         PwMDataItem findThis;
         unsigned int i, cnt = lv->childCount();
         for (i = 0; i < cnt; ++i) {
                 currItem = lv->itemAtIndex(i);
                 findThis.desc = currItem->text(COLUMN_DESC).latin1();
                 findThis.name = currItem->text(COLUMN_NAME).latin1();
                 findThis.url = currItem->text(COLUMN_URL).latin1();
                 findThis.launcher = currItem->text(COLUMN_LAUNCHER).latin1();
                 doc->findEntry(curCat, findThis, searchIn,
                                &foundPos, true);
                 if (!foundPos.size()) {
                         /* Did not find the entry. We seem to have a binary
                          * entry here (pray for it!). So search again with
                          * the "correct" searchIn flags.
                          */
                         const unsigned int searchIn2 = SEARCH_IN_DESC;
                         doc->findEntry(curCat, findThis, searchIn2,
                                        &foundPos, true);
                         if (unlikely(!foundPos.size())) {
                                 BUG();
                                 continue;
                         }
                         /* We assert that it's a binary entry, now.
                          * No chance to efficiently verify it here.
                          */
                 }
                 doc->setListViewPos(curCat, foundPos[0], cnt - i - 1);
         }
 }
 
 void PwMView::selAt(int index)
 {
         QListViewItem *item = lv->itemAtIndex(index);
         if (!item)
                 return;
         lv->setCurrentItem(item);
         lv->ensureItemVisible(item);
 }
 
 void PwMView::renCatButton_slot()
 {
         if (doc->isDeepLocked())
                 return;
         RenCatWnd wnd(this);
         if (wnd.exec() == 1) {
                 QString newName(wnd.getNewName());
                 if (newName == "")
                         return;
                 document()->renameCategory(getCurrentCategory(),
                                            newName);
         }
 }
 
 void PwMView::delCatButton_slot()
 {
         if (doc->isDeepLocked())
                 return;
         if (numCategories() <= 1) {
                 mainClass->showStatMsg(i18n("Can't remove the last category."));
                 return;
         }
         if (KMessageBox::questionYesNo(this,
                                        i18n("Do you really want to\n"
                                             "delete the selected\n"
                                             "category? All password-\n"
                                             "entries will be lost in\n"
                                             "this category!\n"),
                                        i18n("Delete category?"))
             == KMessageBox::No) {
                 return;
         }
         document()->delCategory(getCurrentCategory());
 }
 
 void PwMView::copyPwToClip()
 {
         if (doc->isDeepLocked())
                 return;
         unsigned int curIndex = 0;
         if (!getCurEntryIndex(&curIndex))
                 return;
         PwMDataItem d;
         document()->getDataChangedLock();
         document()->getEntry(getCurrentCategory(), curIndex, &d, true);
         document()->putDataChangedLock();
         PwM::copyToClipboard(d.pw.c_str());
 }
 
 void PwMView::copyNameToClip()
 {
         if (doc->isDeepLocked())
                 return;
         unsigned int curIndex = 0;
         if (!getCurEntryIndex(&curIndex))
                 return;
         PwMDataItem d;
         document()->getEntry(getCurrentCategory(), curIndex, &d);
         PwM::copyToClipboard(d.name.c_str());
 }
 
 void PwMView::copyDescToClip()
 {
         if (doc->isDeepLocked())
                 return;
         unsigned int curIndex = 0;
         if (!getCurEntryIndex(&curIndex))
                 return;
         PwMDataItem d;
         document()->getEntry(getCurrentCategory(), curIndex, &d);
         PwM::copyToClipboard(d.desc.c_str());
 }
 
 void PwMView::copyUrlToClip()
 {
         if (doc->isDeepLocked())
                 return;
         unsigned int curIndex = 0;
         if (!getCurEntryIndex(&curIndex))
                 return;
         PwMDataItem d;
         document()->getEntry(getCurrentCategory(), curIndex, &d);
         PwM::copyToClipboard(d.url.c_str());
 }
 
 void PwMView::copyLauncherToClip()
 {
         if (doc->isDeepLocked())
                 return;
         unsigned int curIndex = 0;
         if (!getCurEntryIndex(&curIndex))
                 return;
         PwMDataItem d;
         document()->getEntry(getCurrentCategory(), curIndex, &d);
         PwM::copyToClipboard(d.launcher.c_str());
 }
 
 void PwMView::copyCommentToClip()
 {
         if (doc->isDeepLocked())
                 return;
         unsigned int curIndex = 0;
         if (!getCurEntryIndex(&curIndex))
                 return;
         PwMDataItem d;
         document()->getEntry(getCurrentCategory(), curIndex, &d);
         PwM::copyToClipboard(d.comment.c_str());
 }
 
 /************************************************************************
  *
  *
  *
  ************************************************************************/
 
 
 PwMDataItemView::PwMDataItemView( QWidget *parent, const char *name )
   : QTextBrowser( parent, name )
 
 
 {
 //US  setWrapPolicy( QTextEdit::AtWordBoundary );
   setLinkUnderline( false );
   // setVScrollBarMode( QScrollView::AlwaysOff );
   //setHScrollBarMode( QScrollView::AlwaysOff );
 
 //US  QStyleSheet *sheet = styleSheet();
 //US  QStyleSheetItem *link = sheet->item( "a" );
 //US  link->setColor( KGlobalSettings::linkColor() );
 
 }
 
 void PwMDataItemView::setPwMDataItem( const PwMDataItem& a )
 
 {
   mItem = a;
   // clear view
   setText( QString::null );
 
 
   QString dynamicPart;
   QString format = "<tr><td align=\"right\"><b>%1</b></td>"
     "<td align=\"left\">%2</td></tr>";
 
   dynamicPart += format
           .arg( i18n("LastUpdate") )
           .arg( mItem.meta.update.toString().latin1() );
 
   dynamicPart += format
           .arg( i18n("Description") )
           .arg( mItem.desc.c_str() );
 
   dynamicPart += format
           .arg( i18n("Name") )
           .arg( mItem.name.c_str() );
 
   dynamicPart += format
           .arg( i18n("Password") )
           .arg( mItem.pw.c_str() );
 
   QString comment(mItem.pw.c_str());
   dynamicPart += format
           .arg( i18n("Comment") )
           .arg( comment.replace( QRegExp("\n"), "<br>" ) );
 
   dynamicPart += format
           .arg( i18n("URL") )
           .arg( mItem.url.c_str() );
 
   dynamicPart += format
           .arg( i18n("Launcher") )
           .arg( mItem.launcher.c_str() );
 
   QString mText = "<table><td colspan=\"2\">&nbsp;</td>";
 
   mText += dynamicPart;
   mText += "</table>";
 
   // at last display it...
   setText( mText );
 
 }
 
 PwMDataItem PwMDataItemView::pwmdataitem() const
 {
   return mItem;
 }
 
 /************************************************************************
  *
  *
  *
  ************************************************************************/
 
 
 PwMDataItemChooser::PwMDataItemChooser( PwMDataItem loc, PwMDataItem rem, bool takeloc, QWidget *parent, const char *name ) 
   : KDialogBase(parent, name, true ,
                 i18n("Conflict! Please choose Entry!"),Ok|User1|Close,Close, false)
 {
     findButton( Close )->setText( i18n("Cancel Sync"));
     findButton( Ok )->setText( i18n("Remote"));
     findButton( User1 )->setText( i18n("Local"));
     QWidget* topframe = new QWidget( this );
     setMainWidget( topframe );
     QBoxLayout* bl;
     if ( QApplication::desktop()->width() < 640 ) {
         bl = new QVBoxLayout( topframe  );
     } else {
         bl = new QHBoxLayout( topframe  );
     }
     QVBox* subframe = new QVBox( topframe );
     bl->addWidget(subframe  );
     QLabel* lab = new QLabel( i18n("Local Entry"), subframe ); 
     if ( takeloc )
         lab->setBackgroundColor(Qt::green.light() );
     PwMDataItemView * av = new PwMDataItemView( subframe );
     av->setPwMDataItem( loc );
     subframe = new QVBox( topframe );
     bl->addWidget(subframe  );
     lab = new QLabel( i18n("Remote Entry"), subframe  ); 
     if ( !takeloc )
         lab->setBackgroundColor(Qt::green.light() );
     av = new PwMDataItemView( subframe );
     av->setPwMDataItem( rem );
     QObject::connect(findButton( Ok ),SIGNAL(clicked()),this, SLOT(slot_remote())); 
     QObject::connect(this,SIGNAL(user1Clicked()),this, SLOT(slot_local())); 
 #ifndef DESKTOP_VERSION
     showMaximized();
 #else
     resize ( 640, 400 );
 #endif
 }
 
 int PwMDataItemChooser::executeD( bool local )
 {
     mSyncResult = 3; 
     if ( local ) 
         findButton( User1 )->setFocus();
     else 
         findButton( Ok )->setFocus();
     exec();
     return mSyncResult;  
 }
 void PwMDataItemChooser::slot_remote()
 {
     mSyncResult = 2;
     accept();
 }
 void PwMDataItemChooser::slot_local()
 {
     mSyncResult = 1;
     accept();
 }
 
 
 
 #ifndef PWM_EMBEDDED
 #include "pwmview.moc"
 #endif