11 files changed, 105 insertions, 56 deletions

diff --git a/bin/kdepim/korganizer/germantranslation.txt b/bin/kdepim/korganizer/germantranslation.txt
index f3f5333..ab8339f 100644
--- a/bin/kdepim/korganizer/germantranslation.txt
+++ b/bin/kdepim/korganizer/germantranslation.txt
@@ -1,625 +1,625 @@
 { "10 minutes","10 Minuten" },
 { "10th","10." },
 { "11th","11." },
 { "12 pm Format","12 AM/PM Format" },
 { "12th","12." },
 { "13th","13." },
 { "14th","14." },
 { "15th","15." },
 { "16th","16." },
 { "17th","17." },
 { "18th","18." },
 { "19th","19." },
 { "1 Day","1 Tag" },
 { "1 h","1 Std" },
 { "1 (high)","1 (hoch)" },
 { "5 (low)","5" },
 { "1st","1." },
 { "20th","20." },
 { "21st","21." },
 { "22nd","22." },
 { "23rd","23." },
 { "24:00 Hour Format","24:00 Stunden Format" },
 { "24th","24." },
 { "25th","25." },
 { "26th","26." },
 { "27th","27." },
 { "28th","28." },
 { "29th","29." },
 { "2nd","2." },
 { "30 minutes","30 Minuten" },
 { "30th","30." },
 { "31st","31." },
 { "3rd","3." },
 { "4th","4." },
 { "5 (lowest)","5 (Niedrigster)" },
 { "5th","5." },
 { "6th","6." },
 { "7th","7." },
 { "8th","8." },
 { "9th","9." },
 { "About...","Über..." },
 { "&Accept","&Akzeptieren" },
 { "Accept","Akzeptieren" },
 { "Accept A&ll","A&lles Akzepieren" },
 { "Access:","Zugriff:" },
 { "A corresponding event is missing in your calendar!","Ein zugehöriger Termin fehlt in ihrem Kalender!" },
 { "Action","Aktion" },
 { "Add Filter","Filter Hinzufügen" },
 { "&Add","Hinzufügen" },
 { "Add","Hinzufügen" },
 { "Additional email addresses:","Zusätzliche E-Mail Adressen:" },
 { "Additional email address:","Zusätzliche E-Mail Adresse:" },
 { "&Addressbook","&Adressbuch" },
 { "Address &Book...","Adress&buch..." },
 { "Agenda Size","Agende Größe" },
 { "Agenda Size:","Größe der Agenda:" },
 { "Agenda view:","Agenda Ansicht:" },
 { "Agenda view background color:","Hintergrund der Agenda Ansicht:" },
 { "All attendees","Alle Teilnehmer" },
 { "AllDayAgenda Height:","Höhe Ganztages Agenda:" },
 { "All day event","Ganztägig" },
 { "Anonymous","Anonym" },
 { "Apply","Anwenden" },
 { "Apr","Apr" },
 { "April","April" },
 {"Ask for every entry on conflict","Frage bei Konflikten nach"},
 { "Ask for preferences before syncing","Vor dem Syncronisieren nachfragen" },
 { "Ask for quit when closing KO/Pi","Vor dem Beenden von KO/Pi nachfragen" },
 { "Attendees","Teilnehmer" },
 { "Aug","Aug" },
 { "August","August" },
 { "Auto-Save","Automatisches Abspeichern" },
 { "Auto save delay in minutes:","Verzög.autom.Speichern in Min" },
 { "Auto saving...","Automatische Sicherung..." },
 { "Begin on:","Starte mit:" },
 { "Begins on: %1","Starte mit: %1" },
 { "<b>From:</b> %1 <b>To:</b> %2","<b>Vom:</b> %1 <b>Zum:</b> %2" },
 { "<b>On:</b> %1","<b>Am:</b> %1" },
 { "<b>On:</b> %1 <b>From:S</b> %2 <b>To:</b> %3","<b>Am:</b> %1 <b>Vom:S</b> %2 <b>Zum:</b> %3" },
 { "<b>Original event:</b><p>","<b>Original Termin:</b><p>" },
 { " - both are modified after last sync"," - beide wurden nach der letzten Syncronisation verändert" },
 { "Busy","Belegt" },
 { "&Cancel","Abbre&chen" },
 { "Cancel","Abbrechen" },
 { "Cannot delete To-Do\nwhich has children.","Kann Todo nicht löschen,\n da noch Einträge vorhanden sind" },
 { "Can't generate mail:\nNo event selected.","Kann e-Mail nicht erstellen:\nKein Termin ausgewählt." },
 { "Categories...","Kategorien..." },
 { "Categories","Kategorien" },
 { "Category","Kategorie" },
 { "Center View","Zentriere Ansicht" },
 { "Change","Ändere" },
 { "Cinema","Kino" },
 { "Clone Item","Klone Eintrag" },
 { "&Close","S&chließen" },
 { "Close","Schließen" },
 { "Close this dialog to abort deletion!","Zum Abbrechen des Löschvorganges Dialog schließen!" },
 { "Colors","Farben" },
 { "completed","erledigt" },
 { "completed on %1","erledigt am %1" },
 { "Complete","Erledigt" },
 { "Confidential","Vertraulich" },
 { "Configure...","Einstellungen..." },
 { "Confirm &deletes","Löschvogang bestätigen" },
 { "Couldn't load calendar\n '%1'.","Kann Kalender\n '%1' nicht laden." },
 { "Counter-event Viewer","Terminzähler Ansicht" },
 { "Daily ending hour:","Feierabend:" },
 { "Daily starting hour:","Anfangszeit:" },
 { "Daily","Täglich" },
 { "Date Format","Datums Format" },
 { "Date Format:","Datums Format:" },
 { "DateNavigator:(nr)","Datums Navigator" },
 { "Dates: ","Datum: " },
 { "Date && Time","Datum && Zeit" },
 { "Day begins at:","Der Tag beginnt um:" },
 { "Days in Next-X-Days:","Tage in Nächste-X-Tage:" },
 { "Days in What's Next:","Tage in What's Next:" },
 { "day(s)","Tag(e)" },
 { "Days to show in Next-X-Days view:","Welche Tage in Nächste-X-Tagen anzeigen:" },
 { "day","Tag" },
 { "Dec","Dez" },
 { "December","Dezember" },
 { "Default alarm time:","Standard Alarmzeit:" },
 { "Default appointment time:","Standard Termin Startzeit:" },
 { "Default event color:","Standard Terminfarbe:"   },
 { "Default","Standard" },
 { "Def. duration of new app.:","Standard Termin Länge:" },
 { "Delete All","Lösche alles" },
 { "Delete all selected","Lösche alle Selektierten" },
 { "Delete Current","Aktuellen löschen" },
 { "Delete Event...","Lösche Termin..." },
 { "Delete Event","Lösche Termin" },
 { "&Delete...","Lösche..." },
 { "Delete...","Lösche..." },
 { "Delete","Lösche" },
 { "Delete Todo...","Lösche Todo..." },
 { "Delete To-Do","Lösche Todo" },
 { "Deleting item %d ...","Lösche Eintrag %d..." },
 { "Descriptions","Beschreibungen" },
 { "Deselect all","Deselektiere Alle" },
 { "Details","Details" },
 { "Dinner","Abendessen" },
 { "Do you really want\nto close KO/Pi?","Möchten Sie wirklich\nKO/PI verlassen?" },
 { "Due Date","Fällig am" },
 { "Due: ","Fällig: "},
 { "Due Time","Fällig um"  },
 { "Due:","Fällig:"},
 { "Duration: ","Dauer: " },
 { "Edit...","Bearbeite..." },
 { "Edit Event...","Bearbeite Termin..." },
 { "Edit Event","Bearbeite Termin" },
 { "Edit exceptions","Bearbeite Ausnahmen" },
 { "EditorBox:","Editor Fenster:" },
 { "Edit Recurrence Range","Bearbeite Wiederholung"  },
 { "Edit Todo...","Berabeite Todo..." },
 { "Edit To-Do","Todo bearbeiten" },
 { "E&mail address:","E&mail Adresse:" },
 { "(EmptyEmail)","(KeineEmail)" },
 { "(EmptyName)","(KeinName)" },
 { "Enable Recurrence","Wiederholung anschalten" },
 { "End after","Endet nach"},
 { "End by:","Endet am"},
-{ "End Date","End Datum" },
+{ "End/Due Date","Ende/Fällig am" },
 { "End:","Ende:" },
-{ "End Time","End Zeit" },
+{ "End/Due Time","Ende/Fällig um" },
 { "English","Englisch" },
 { "Event","Termin" },
 { "Event list","Termin Liste" },
 { "Events","Termine" },
 { "Event Viewer:","Termin Übersicht:" },
 { "every","jede" },
 { "Exceptions...","Ausnahmen..." },
 { "Exceptions","Ausnahmen" },
 { "Exclude holidays","Ohne freie Tage" },
 { "Exclude Saturdays","Ohne Samstage" },
 { "Feb","Feb" },
 { "February","Februar" },
 { "&Find","Suche!" },
 { "Fonts","Schriftart" },
 { "Force take local entry always","Erzwinge:Nimm immer lokalen Eintrag" },
 { "Force take remote entry always","Erzwinge:Nimm immer fernen Eintrag"},
 { "Free","Frei" },
 { "Friday","Freitag" },
 { "Fri","Fr" },
 { "From:","Vom:" },
 { "Full &name:","Vor- und &Nachname:" },
 { "General","Allgemein" },
 { "German","Deutsch" },
 { "Gifts","Geschenke" },
 { "Go to Today","Heute anzeigen" },
 { "Help","Hilfe" },
 { "Hide Dates","Daten ausblenden" },
 { "Highlight color:","Markierungen:" },
 { "Holiday color:","Freie Tage:" },
 { "hour(s)","Stunde(n)" },
 { "In %1 days: ","In %1 Tagen: " },
 { "Incomplete Todo:","Unerledigte Aufgaben:" },
 { "Information","Information" },
 { "Invalid search expression,\ncannot perform ","Kann Suche nicht ausführen" },
 { "Jan","Jan" },
 { "January","Januar" },
 { "JournalView:","Journal Ansicht:" },
 { "Journals","Journale" },
 { "Jul","Jul" },
 { "July","Juli" },
 { "Jump to date","Springe zum Datum" },
 { "June","Juni" },
 { "Jun","Jun" },
 { "Key Bindings...","Tastenzuordnung..." },
 { "Kids","Kinder" },
 { "Known Problems...","Bekannte Probleme..." },
 { "KO/Pi Find ","KO/Pi Suchdialog " },
 { "KO/Pi Find: ","KO/Pi Suchen: " },
 { "KO/Pi is starting ... ","  KO/Pi startet ... \n... Zeit für eine Kaffeepause ..." },
 { "Language:(needs restart)","Sprache (Neustart!)" },
 { "Language:","Sprache" },
 { "Large","Etwas mehr" },
 { "List View:","Listenansicht:" },
 { "List View","Listenansicht" },
 { "Load/Save","Laden/Speichern" },
 { "Load Template","Lade Vorlage" },
 { "Locale","Lokalisation" },
 { "Local temp file:","Lokale temp. Datei:" },
 { "Location: ","Ort: " },
 { "Location:","Ort:" },
 { "Mail client","Mail Programm" },
 { "Mail Client","Mail Programm" },
 { "March","März" },
 { "Mar","Mär" },
 { "May","Mai" },
 { "M. Bains line:","M. Bains Linie:" },
 { "Medium","Medium" },
 { "Method","Methode" },
 { "minute(s)","Minute(n)" },
 { "Monday","Montag" },
 { "Mon","Mo" },
 { "Monthly","Monatlich" },
 { "Month not long enough","Monat ist nicht lang genug" },
 { "month(s)","Monat(e)" },
 { "Month view:","Monatsansicht:" },
 { "Month view uses category colors","Monatsansicht zeigt Kategorie Farben" },
 { "Todo view uses category colors","Todo Ansicht zeigt Kategorie Farben" },
 { "Move &Down","Nach unten verschieben" },
 { "Move &Up","Nach oben verschieben" },
 { "Name:","Name:" },
 { "Name","Name" },
 { "\nAre you sure you want\nto delete this event?","\nSind Sie sicher, dass Sie\nden Termin löschen möchten?" },
 { "%n Days","%n Tage" },
 { "Never","Nie" },
 { "New event...","Neuer Termin..." },
 { "New event","Neuer Termin" },
 { "New Event...","Neuer Termin..." },
 { "New Events/Todos should","Neue Termine/Todos sollten" },
 { "&New","&Neu" },
 { "New","Neu", },
 { "New Sub-Todo...","Neues Sub-Todo..." },
 { "New Todo...","Neues Todo..." },
 { "Next Alarm: ","Nächster Alarm: ", },
 { "&Next Day","&Nächster Tag", },
 { "Next days view uses full window","Nächste-X-Tage nutzt Vollbild" },
 { "Next month","Nächster Monat" },
 { "&Next Week","&Nächste Woche" },
 { "Next year","Nächstes Jahr" },
 { "Next Year","Nächstes Jahr" },
 { "%n h","%n Std" },
 { "No ending date","Kein End-Datum", },
 { "No event, nothing to do.","Kein Termin, nichts zu tun.", },
 { "No event selected.","Kein Termin selektiert" },
 { "No","Nein" },
 { "No program set","Kein Programm ausgewählt", },
 { "Normal","Normal" },
 { "[No selection]","Keine Selektion", },
 { "No sound set","Kein Sound ausgewählt", },
 { "no time ","keine Zeit ", },
 { "no time","keine Zeit", },
 { "No Time","Keine Zeit" },
 { "November","November" },
 { "Nov","Nov", },
 { "\nThis event recurs\nover multiple dates.\n","\nDieser Termin wiederholt sich an mehreren Tagen.\n" },
 { "occurrence(s)","Vorkommen" },
 { "October","Oktober" },
 { "Oct","Okt", },
 { "O-due!","Ü-fällig! " },
 { "&OK","&OK" },
 { "Ok+Show!","Ok+Anzeigen" },
 { "Organizer: %1","Organisator %1" },
 { "Organizer","Organisator" },
 { "Owner: ","Besitzer: " },
 { "Owner:","Besitzer:" },
 { "<p><b>Priority:</b> %2</p>","<p><b>Priorität:</b> %2</p>" },
 { "Pick a date to display","Wähle einen Tag zum anzeigen aus" },
 { "Please specify a valid due date.","Bitte gültiges Fälligkeitsdatum angeben."},
 { "Please specify a valid end date,\nfor example '%1'.","Bitte gültiges Enddatum angeben,\nz.B.'%1'." },
 { "Please specify a valid start date.","Bitte gültiges Startdatum angeben." },
 { "Please specify a valid start date,\nfor example '%1'.","Bitte gültiges Startdatum angeben,\nz.B. '%1'." },
 { "Please specify a valid start time.","Bitte gültige Startzeit angeben."},
 { "Please specify a valid start time,\nfor example '%1'.","Bitte gültige Startzeit angeben,\nz.B. '%1'." },
 { "Preferences - some settings need a restart (nr)","Einstellungen - teilweise Neustart erforderlich (bn)" },
 { "&Previous Day","Vorheriger Tag" },
 { "Previous month","Vorheriger Monat" },
 { "Previous Month","Vorheriger Monat" },
 { "&Previous Week","Vorherige Woche" },
 { "Previous year","Vorheriges Jahr" },
 { "Previous Year","Vorheriges Jahr" },
 { "Printing","Drucken" },
 { "Priority:","Priorität:" },
 { "Private","Privat" },
 { "Proceed","Weiter" },
 { "Public","Öffentlich" },
 { "Purge","Entferne" },
 { "Purge Completed...","Entferne erledigte Todos..." },
 { "Purge Todos","Todos bereinigen" },
 { "read-only","schreibgeschützt" },
 { "Recur every","Wiederh. alle" },
 { "Recur in the month of","Wiederh. im Monat" },
 { "Recur on the","Wiederh. am" },
 { "Recur on this day","Wiederh. am diesen Tag" },
 { "Recurrence Range...","Wiederholungs Zeitraum..." },
 { "Recurrence Range","Wiederholungs Zeitraum" },
 { "Recurrence Rule","Wiederholungs Regel" },
 { "Recurrence","Wiederholung" },
 { "Recurs","Wiederholung" },
 {"&Reject","Abweisen"},
 { "Reminder:","Alarm:" },
 { "Rem.:","Alarm:" },
 { "Rem.","Alarm:" },
 { "Remote file:","Remote Datei:"},
 { "Remote IP:","Remote (ferne) IP:" },
 { "Remote syncing (via ssh/scp) network settings ","Remote Sync (via ssh/scp) Netzwerk Einstellungen " },
 { "Remote user:","Remote Benutzer"},
 { "&Remove","Entfe&rnen" },
 { "Remove","Entfernen" },
 { "Request response","Bemerkung anfordern" },
 { "Role:","Rolle:" },
 { "Role","Rolle" },
 { "Sat","Sa" },
 { "Saturday","Samstag" },
 { "Search for:","Suche nach:" },
 { "Search In","Suche in" },
 { "Search...","Suche..." },
 { "Search","Suche" },
 { "Select Addresses","Wähle Adressen" },
 { "Select all","Selektiere Alle" },
 { "Select a month","Wähle Monat" },
 { "Select a week","Wähle Woche" },
 { "Select a year","Wähle Jahr" },
 { "Send directly","Sende direkt" },
 { "&Send Messages","&Sende Nachrichten", },
 { "Sep","Sep" },
 { "September","September" },
 { "Shopping","Einkaufen" },
 { "Show Dates","Zeige Daten" },
 { "Show events that recur daily in date nav.","Zeige tägl.wiederh.Term.in Datums Nav." },
 { "Show Event","Termin anzeigen" },
 { "Show ev. that recur weekly in date nav.","Zeige wöch.wiederh.Term.in Datums Nav." },
 { "Show Marcus Bains line","Zeige Marcus Bains Linie" },
 { "Show summary after syncing","Zeige Zusammenfassung nach Sync." },
 { "Show time as:","Zeige Zeit als" },
 { "Show Todo","Todo anzeigen" },
 { "Vertical screen layout(Needs restart)","Vertikaler Bildschirm-Layout (Neustart!)" },
 { "&Show","Anzeigen" },
 { "Show...","Anzeigen..." },
 { "Show","Anzeigen" },
 { "Small","Klein" },
 { "Sorry","Tut mir leid" },
 {"Sorry, the copy command failed!\nCommand was:\n","Der Kopierbefehl schlug fehl!\nBefehl war:\n"},
 { "Start:","Start:" },
-{ "Start Date","Start Datum" },
+{ "Start Date","Start am" },
 { "Start date: %1","Start Datum: %1" },
-{ "Start Time","Start Zeit" },
+{ "Start Time","Start um" },
 { "Status:","Status:" },
 { "Status","Status:" },
 { "Summaries","Titel" },
 { "Summary:","Titel:" },
 { "Summary","Titel" },
 { "Sunday","Sonntag" },
 { "Sun","So" },
 { "Sync preferences:","Sync Einstellungen" },
 { "Sync Prefs","Sync Einstellungen" },
 { "Syncronize","Daten abgleich" },
 { "Take local entry on conflict","Nimm lokalen Eintrag beim Konflikt" },
 { "Take newest entry on conflict","Nimm neuesten Eintrag beim Konflikt" },
 { "Take remote entry on conflict","Nimm fernen Eintrag beim Konflikt" },
 { "Template '%1' does not contain a valid Todo.","Template '%1' enthält kein gültiges Todo" },
 { "Template does not contain a valid Event.","Template '%1' enthält keinen gültigen Termin" },
 { "Template...","Vorlage..." },
 { "This day","Dieser Tag" },
 { "This is an experimental feature. ","Dieses Feature ist experimentel" },
 { "This item will be\npermanently deleted.","Dieser Eintrag wird\nkomplett gelöscht." },
 { "This item will be permanently deleted.",  "Dieser Eintrag wird komplett gelöscht." },
 { "Thu","Do" },
 { "Thursday","Donnerstag" },
 { "Time associated","Mit Zeit" },
 { "Time bar:","Uhrzeit Zeile:" },
 { "Time && Date","Zeit und Datum" },
 { "Time Format","Zeit Format" },
 { "Time Format(nr):","Zeit Format(Neustart!)" },
 { "Date Labels:","Datumsleiste:" },
 { "Time: ","Zeit: " },
 { "Timezone:","Zeitzone:" },
 { "To: ","Bis: " },
 { "To:","Bis:" },
 { "Today: ","Heute: " },
 { "Todo due today color:","Heute fällige Todos" },
 { "To-do items:","To-Do items:" },
 { "Todo overdue color:","Überfällige Todos" },
 { "Todo","Todo" },
 { "To-do view shows completed Todos","Todo Ansicht zeigt erledigte Todos" },
 { "ToDoView:","Todo Ansicht:" },
 { "Toggle Alarm","Wechsle Alarm" },
 { "Toggle Allday","Umschalten Ganztag" },
 { "Tomorrow: ","Morgen: " },
 { "Tue","Di" },
 { "Tuesday","Dienstag" },
 { "Two entries are in conflict, if: ","Zwei Einträge haben einen Konflikt, wenn:" },
 { "Unable to find template '%1'.","Kann Vorlage '%1' nicht finden." },
 { "Unknown","Unbekannt" },
 { "Up","Hinauf" },
 { "Use password (if not, ask when syncing)","Passwort: (sonst jedesmal anfragen)" },
 { "User defined","Benutzerdefiniert" },
 { "User long date:","Format langes Datum:" },
 { "User short date:","Forma kurzes Datum:" },
 { "View","Ansicht" },
 { "View Fonts","Schriftarten Ansichten" },
 { "Views","Ansichten" },
 { "Wed","Mi" },
 { "Wednesday","Mittwoch" },
 { "Week %1","Woche %1" },
 { "Weekly","Wöchentlich" },
 { "Week starts on Sunday","Woche beginnt Sonntags" },
 { "What's Next View:","What's Next Anz." },
 { "What's next ?","Was kommt als nächstes?(What's Next)" },
 { "Working Hours","Tägliche Arbeitszeit" },
 { "Working hours color:","Arbeitszeit in der Agenda Ansicht:" },
 { "Write back existing entries only","Nur exisitierende Einträge zurückschreiben" },
 { "Write back synced file","Syncronisierte Datei zurückschreiben" },
 { "Yearly","Jährlich" },
 { "year(s)","Jahr(e)" },
 { "Yes","Ja" },
 { "You have %d item(s) selected.\n","Sie haben %d Einträge ausgewählt.\n" },
 { "You have to restart KOrganizer for this setting to take effect.","Sie müssem Korganizer neu starten, damit diese Einstellung aktiviert wird." },
 { "week(s) on:","Woche(n) am: " },
 { "Full menu bar(nr)","Volle Menuleiste(bn)" },
 { "Timezone has daylight saving","Zeitzone hat Sommerzeit" },
 { "Actual start and end is the\nsunday before this date.","Tatsächlicher Beginn/Ende ist der\nSonntag vor diesem Datum!" },
 { "The year in the date is ignored.","Das Jahr vom Datum wird ignoriert." },
 { "Daylight start:","Sommerzeit Start:" },
 { "Daylight end:","Sommerzeit Ende:" },
 { "Time Zone","Zeitzone" },
 { "Monday 19 April 2004: %A %d %B %Y","Montag 19 April 2004: %A %d %B %Y" },
 { "%A: Monday --- %a: Mon","%A: Montag --- %a: Mon" },
 { "minutely","minütlich" },
 { "hourly","stündlich" },
 { "daily","täglich" },
 { "weekly","wöchentlich" },
 { "monthly","monatlich" },
 { "day-monthly","tag-monatlich" },
 { "month-yearly","monat-jährlich" },
 { "day-yearly","tag-jährlich" },
 { "position-yearly","pos-jährlich" },
 { "Edit item on doubleclick (if not, show)","Editiere mit Doppelklick(wenn nicht, zeige)" },
 { "Highlight current day in agenda","Hebe >>heute<< in Agenda hervor" },
 { "Use light color for highlight current day","Helle Farbe für >>heute<< Hervorhebung" },
 { "Highlight selection in Time Edit","Hebe Auswahl in Zeit Edit hervor" },
 { "Hold fullscreen on view change","Behalte Vollbild bei Ansichswechsel" },
 { "Hold non-fullscreen on view change","Behalte Nicht-Vollbild bei Ansichtsw." },
 { "Event list view uses full window","Listenansicht nutzt Vollbild" },
 { "Set agenda to DayBeginsAt on change","Setze Agenda auf TagBeginntUm bei Wechsel" },
 { "Set agenda to current time on change","Setze Agenda auf gegenw.Zeit bei Wechsel" },
 { "Listview uses monthly timespan","Listenansicht zeigt monatliche Zeitspanne" },
 { "ViewChange","Ansichtswechsel" },
 { "Default alarm *.wav file:","Standard Alarm *.wav Datei:" },
 { "This setting is useless for 5500 user!","Diese Einst. ist nutzlos für 5500 Nutzer" },
 { "File","Datei" },
 { "Clone...","Dupliziere..." },
 { "Move...","Bewege..." },
 { "Beam...","Sende via IR..." },
 { "&Clone...","Dupliziere..." },
 { "&Move...","Bewege..." },
 { "&Beam...","Sende via IR..." },
 { "Show Completed","Zeige erledigte Todos" },
 { "Show Quick Todo","Zeige Quick-Todo" },
 { "Unparent Todo","Un-sub Todo" },
 { "Save selected to file...","Speichere Selektierte..." },
 { "Add Categ. to selected...","Füge zu Selekt. Kateg. hinzu..." },
 { "Set Categ. for selected...","Setze Kateg. für Selekt." },
 { "Beam via IR...","Sende via IR..." },
 { "Search","Suchen" },
 { "Date Picker","Datum auswählen" },
 { "Day View","Tagesansicht" },
 { "Work Week","Arbeitswoche" },
 { "Week","Wochenansicht" },
 { "Month","Monatsansicht" },
 { "Todo View","Todo Liste" },
 { "Journal","Journal" },
 { "Next days","Nächste Tage" },
 { "Print agenda selection...","Drucke Agendaselektion..." },
 { "Toggle DateNavigator","Navigator umschalten" },
 { "Toggle FilterView","Filteransicht umschalten" },
 { "Prev. month","Vorheriger Monat" },
 { "Go backward","Gehe zurück" },
 { "Go forward","Gehe weiter" },
 { "Synchronize","Synchronisieren" },
 { "AgendaSize","Agendagröße" },
 { "Import (*.ics/*.vcs) file","Importiere (*.ics/*.vcs) Datei" },
 { "Import last file","Importiere letzte Datei" },
 { "Import Opie/Qtopia Cal.","Importiere Opie/Qtopia Kal." },
 { "Save Backup...","Speichere Backup..." },
 { "Export VCalendar","Exportiere VCalendar" },
 { "Manage new categories...","Verwalte neue Kategorien..." },
 { "Beam complete calendar...","Sende kompletten Kalender..." },
 { "Beam filtered calendar...","Sende gefilterten Kalender..." },
 { "Remote via ssh","Über Netzwerk via ssh" },
 { "With local file","Mit lokaler Datei" },
 { "With last file","Mit letzter Datei" },
 { "KO/Pi: Ready for beaming","KO/Pi: Bereit zum Senden" },
 { "KO/Pi:Beaming done","KO/Pi: Senden erfolgt" },
 { "Save filename","Speichern: Dateinamen wählen" },
 { "File already exists!\nOld file from:\n%1\nOverwrite?\n","Dateiname existiert bereits!\nAlte Datei vom:\n%1\nÜberschreiben?\n" },
 { "KO/Pi: Warning!","KO/Pi: Warnung!" },
 { "Overwrite!","Überschreibe!" },
 { "KO/Pi:Saved %1","KO/Pi:Gespeichert %1" },
 { "All selected items will be\npermanently deleted.\n(Deleting items will take\nsome time on a PDA)\n","Alle selektierten Einträge werden\nunwiederbringlich gelöscht.\n(Löschen kann auf dem\nPDA einige Zeit dauern)\n" },
 { "KO/Pi Confirmation","KO/Pi Bestätigung" },
 { "Close dialog to abort deletion!","Schließe Dialog um das Löschen abzubrechen!" },
 { "Deleting item %d ...","Lösche Eintrag %d ..." },
 { "%d items remaining in list.","%d Einträge sind in der Liste verblieben." },
 { "Size","Größe" },
 { "Date","Datum" },
 { "Mime Type","Datei Typ" },
 { "All Files","Alle Dateien" },
 { "Files","Dateien" },
 { "Documents","DoKumente" },
 { "Select Categories","Selektiere Kategorien" },
 { " &Deselect All "," Auswahl aufheben " },
 { "A&dd","Hinzu" },
 { "&Modify","Ändern" },
 { "Edit Categories","Editiere Kategorien" },
 { " &Edit Categories "," &Editiere Kategorien " },
 { "Beam Options","Beam Einstellungen" },
 { " With timezone "," Mit Zeitzone " },
 { " Local time ",  " Lokale Zeit " },
 { "Manage new Categories","Verwalte neue Kategorien" },
 { "Add to category list","Füge zur Kategorieliste hinzu" },
 { "Remove from Events/Todos","Entferne von Terminen/Todos" },
 { "New categories not in list:","Kategorien, die nicht in der Liste sind:" },
 { "File format","Datei Format" },
 { "Time format","Zeit Format" },
 { "KO/Pi:Saving Data to File ...","KO/Pi: Speichere Kalender in Datei ..." },
 { "KO/Pi:File Saved. Needed %d sec, %d ms","KO/Pi: Abgespeichert in %d sec, %d ms" },
 { "h","Std" },
 { "min","Min" },
 { "hou","Std" },
 { "day","Tag" },
 { "French","Französich" },
 { "Time","Zeit" },
 { "Event Viewer","Termin Anzeige" },
 { "Cancel Sync","Sync Abbrechen" },
 { "Remote","Fern" },
 { "Local","Lokal" },
 { "Conflict! Please choose entry","Konflikt! Bitte Eintrag wählen" },
 { "Local: ","Lokal: " },
 { "Remote: ","Fern: " },
 { "Last modified: ","Zuletzt geändert: " },
 { "Location: ","Ort: " },
 { "<p><b>From:</b> %1 </p><p><b>To:</b> %2</p>","<p><b>Von:</b> %1 </p><p><b>Bis:</b> %2</p>" },
 { "<p><b>On:</b> %1</p>","<p><b>Am:</b> %1</p>" },
 { "<p><b>From:</b> %1</p> ","<p><b>Von:</b> %1</p> " },
 { "<p><b>To:</b> %1</p>","<p><b>Bis:</b> %1</p>" },
 { "<p><b>On:</b> %1</p> ","<p><b>Am:</b> %1</p> " },
 { "<p><b>From:</b> %1 <b>To:</b> %2</p>","<p><b>Von:</b> %1 <b>Bis:</b> %2</p>" },
 { "This is a %1 recurring event.","Das ist ein %1 wiederholender Termin." },
 { "<b>Next recurrence is on:</b>","<b>Nächste Wiederholung ist am:</b>" },
 { "<b>Last recurrence was on:</b>","<b>Letzte Wiederholung war am:</b>" },
 { "( %1 min before )","( %1 min vorher )" },
 { "<b>Alarm on: ","<b>Alarm am: " },
 { "<b>Details: </b>","<b>Details: </b>" },
 { "<p><b>Priority:</b> %2</p>","<p><b>Priorität:</b> %2</p>" },
 { "<p><i>%1 % completed</i></p>","<p><i>%1 % erledigt</i></p>" },
 { "Organizer","Organisator" },
 { "Save","Speichern" },
 { "Exit (+save)","Beenden(+speichern)" },
 { "Home","Zuhause" },
 { "Office","Büro" },
 { "Library","Bibliothek" },
 { "Doctor","Arzt" },
 { "Beach","Strand" },
 { "Conference room","Konferenzraum" },
 { "Drive Home","Heimfahrt" },
 { "Watch TV","Tv gucken" },
 { "Phone call","Telefonanruf" },
 { "Pay bill","Rechnung bezahlen" },
 { "Read book","Buch lesen" },
 { "Watering plants","Pflanzen giessen" },
 {"Appointment","Verabredung" },
 {"Birthday","Geburtstag" },
 {"Business","Geschäft" },
 {"Business Travel","Geschäftsreise" },
 {"Cinema","Kino" },
 {"Customer","Kunde" },
 {"Break","Pause" },
 {"Breakfast","Frühstück" },
 {"Competition","Wettkampf" },
 {"Dinner","Abendessen" },
 {"Education","Erziehung" },
 {"Family","Familie" },
 {"Favorites","Favoriten" },
 {"Festival","Festival" },
 {"Fishing","Angeln" },
 {"Flight","Flug" },
 {"Gifts","Geschenk" },
 {"Holiday","Feiertag" },
 {"Holiday Cards","Ansichtskarten" },
 {"Hot Contacts","Heisse Kontakte" },
 {"Hiking","Wandern" },
 {"Hunting","Jagen" },
 {"Key Customer","Wichtiger Kunde" },
 {"Kids","Kinder" },
 {"Lunch","Mittagessen" },
 {"Meeting","Treffen" },
 {"Miscellaneous","Verschiedenes" },
 {"Partner","Partner" },
 {"Party","Partie" },
 {"Personal","Privat" },
 {"Personal Travel","Privatreise"},
 {"PHB","PHB" },
@@ -1278,266 +1278,268 @@
 { "Summary/Loc.","Titel/Ort" },
 { "No items found. Use '*' and '?' where needed.","Nichts gefunden. Benutze '*' and '?' wo benötigt." },
 { "Week Number","Wochennummer" },
 { "Import","Importiere" },
 { "Export","Exportiere" },
 { "Beam","Beame" },
 { "Export","Exportiere" },
 { "As iCal (ics) file...","Als iCal (ics) Datei..." },
 { "As vCal (vcs) file...","Als vCal (vcs) Datei..." },
 { "Journal/Details...","Journale/Details..." },
 { "Agenda View","Agenda Ansicht" },
 { "Show current time","Zeige aktuelle Zeit" },
 { "Edit new item","Bearbeite neuen Eintrag" },
 { "Please select at least one\nof the types to search for:\n\nEvents\nTodos\nJournals","Bitte wählen Sie mindestens\neinen dieser Typen\num darin zu suchen:\n\nTermine\nTodos\nJournale" },
 { "There is no next alarm.","Es gibt keinen nächsten Alarm." },
 { "%1 %2 - %3 (next event/todo with alarm)","%1 %2 - %3 (nächster Termin/Todo mit Alarm)" },
 { "The next alarm is in:\n","Der nächste Alarm ist in:\n" },
 { "%1 days\n","%1 Tagen\n" },
 { "1 day\n","1 Tag\n" },
 { "%1 hours\n","%1 Stunden\n" },
 { "1 hour\n","1 Stunde\n" },
 { "%1 minutes\n","%1 Minuten\n" },
 { "1 minute\n","1 Minute\n" },
 { "Only one toolbar","Nur eine Toolbar" },
 { "Print","Drucke" },
 { "Print selected event / todo...","Drucke ausgewählten Termin / Todo..." },
 { "There is nothing selected!","Es ist nichts ausgewählt!" },
 { "\n\nDo you really want to print this item?","\n\nMöchten Sie wirklich diesen Eintrag ausdrucken? " },
 { "KO/Pi Print Confirmation","KO/Pi Druckbestätigung" },
 { "This prints the view as you see it.\n(With the complete content, of course.)\nYou may change the print layout by resizing the view.\nPrint unscaled may print several pages\ndepending on the amount of data.\nPrint scaled down will print all on one page.\nPrint scaled up/down will print all on one page,\nbut will scale up the text to page boundaries,\nif the text is smaller than the page.\nYou can select page geometry setup in the next dialog.\n","Dies druckt die Ansicht wie man sie sieht.\n(Mit dem kompletten Inhalt natürlich.)\nMan kann das Layout ändern durch ändern der Fenstergröße.\nDrucke unskaliert druckt ggf. mehrere Seiten\nabhängig von der Menge der Daten.\nDrucke runterskaliert um auf eine Seite zu passen\ndruckt alles auf eine Seite.\nDrucke hoch/runterskaliert um genau auf eine Seite zu passen\nvergrößert den Text gegebenenfalls.\nDas Seitenlayout kann im nächsten Dialog gewählt werden.\n" },
 { "KO/Pi Printout","KO/Pi Ausdruck" },
 { "Print unscaled","Drucke unskaliert" },
 { "Print scaled down to fit one page","Drucke runterskaliert um auf eine Seite zu passen." },
 { "Print scaled up/down to fit one page","Drucke hoch/runterskaliert um genau auf eine Seite zu passen." },
 { "Printout Mode","Druck Modus" },
 { "Filter menu icon","Filtermenu Icon" },
 { "<p><b>A+(shift or ctrl)</b>: Show occurence of next alarm</p>\n","<p><b>A+(shift oder ctrl)</b>: Zeige Zeit bis zum nächsten Alarm</p>\n" },
 { "<p><b>N</b>: Switch to next view which has a toolbar icon</p>\n","<p><b>N</b>: Wechsle zur nächsten Ansicht, die ein Icon in der Toolbar hat</p>\n" },
 { "%1d","%1t" },
 { "%1h","%1std" },
 { "%1min","%1min" },
 { "( %1 before )","( %1 vorher )" },
 { "The next alarm is in\nless than one minute!","Der nächste Alarm kommt in\nweniger als einer Minute!" },
 { "\nThe internal alarm notification is disabled!\n","\nDie interne Alarmbenachrichtigung ist ausgeschaltet!\n" },
 { "Enable it in the settings menu, TAB alarm.","Schalten Sie sie an im Menu Einstellungen, TAB Alarm." },
 { "Show Sync Events","Zeige Sync-Ereignisse" },
 { "Use short date in WN+Event view","Zeige Kurzdatum in WN+Terminanzeige" },
 { "Number of max.displayed todo prios:","Anzahl max.angezeigter Todo-Prios:" },
 { " on "," am " },
 { "On: ","Am: " },
 { "<i>The recurrence is computed from the start datetime!</i>","<i>Die Wiederholung wird vom Startwert aus berechnet!</i>" },
 { "Start/Stop todo...","Starte/Stoppe Todo..." },
 { "Color for running todos:","Farbe für laufende Todos:" },
 { "The todo\n%1\nis started.\nDo you want to set\nthe state to stopped?","Das Todo\n%1\nist gestartet.\nWollen Sie es\nauf gestoppt setzen?" },
 { "Todo is started","Todo ist gestartet" },
 { "Stop todo","Stoppe Todo" },
 { "Todo is stopped","Todo ist gestoppt" },
 { "Start todo","Starte Todo" },
 { "The todo\n%1\nis stopped.\nDo you want to set\nthe state to started?","Das Todo\n%1\nist gestoppt.\nWollen Sie es auf\ngestartet setzen?" },
 { "The todo\n%1\nwill be cloned!\nIt has subtodos!\nDo you want to clone\nall subtodos as well?","Das Todo\n%1\nwird geklont!\nEs hat Untertodos!\nMöchten Sie alle\nUntertodos auch klonen?" },
 { "Todo has subtodos","Todo hat Untertodos" },
 { "Block popup until mouse button release","Sperre Popup bis Mausknopf losgelassen" },
 { "Colors","Farben" },
 { "Click on new parent item","Klicke auf neues Übertodo" },
 { "Reparenting aborted!","Übertodo setzen abgebrochen" },
 { "Cannot move Todo to itself\nor a child of itself","Kann nicht Todo auf\nsich selbst oder\nein Untertodo verschieben" },
 { "Recursive reparenting not possible!","Rekursives Verschieben nicht möglich" },
 { "Delete all completed todos?\n(Completed recurring todos\nwill not be deleted!)","Entferne alle erledigten Todos?\n(Erledigte wiederholende Todos\nwerden nicht gelöscht!)" },
 { "Alternating background of list views","Abwechselnder Hintergrund für Listen" },
 { "times","Zeiten" },
 { "The todo\n%1\nhas subtodos!\nDo you want to set\nthe categories for\nall subtodos as well?","Das Todo\n%1\nhat Untertodos!\nMöchten Sie die Kategorien\nauch für alle Untertodos setzen?" },
 { "Backup enabled","Backup angeschaltet" },
 { "Use standard backup dir","Standard Backupverzeichnis" },
 { "Number of Backups:","Anzahl der Backups" },
 { "Make backup every ","Mache ein Backup alle " },
 { " days"," Tage" }, 
 { "Creating backup ... please wait ...","Erstelle Backup ... bitte warten ..." },
 { "Backup Failed!","Backup Problem!" },
 { "Try again now","Versuche jetzt nochmal" },
 { "Try again later","Versuche später nochmal" },
 { "Try again tomorrow","Versuche morgen nochmal" },
 { "Disable backup","Schalte Backup ab" },
 { "<b>Backup directory does not exist: </b>","<b>Backup Verzeichnis existiert nicht: </b>" },
 { "<b>The backup copy command failed!</b>","<b>Das Backup Kopierkommando is fehlgeschlagen!</b>" },
 { "Choose action","Wähle Aktion" },
 { "Comment for todo:","Kommentar zum Todo:" },
 { "Stop+note","Stop+Notiz" },
 { "Agenda view shows completed todos","Agenda Ansicht zeigt erledigte Todos" },
 { "KO/Pi: Missing alarms!","KO/Pi: Verpasste Alarme!" },
 { "You missed the alarms for the following events or todos:","Sie verpassten die Alarme für folgende Termine oder Todos:" },
 { "Print complete list...","Drucke komplette Liste..." },
 { "Hide all selected","Verstecke Ausgewählte" },
 { "Add items","hinzufügen" },
 { "One (or more) selected\ntodo has subtodos!\nDo you want to select\nall subtodos of all\nselected todos as well?","Ein (oder mehrere) ausgewähltes\nTodo hat Untertodos!\nMöchten Sie der Auswahlliste\nalle Untertodos von allen\nausgewählten Todos hinzufügen?" },
 { "Print List View...","Drucke Listenansicht..." },
 { "You can make a printout of the <b>List View</b> and the list view in the <b>Search Dialog</b>! To do this, please go to the <b>List View/Search Dialog</b>. Right click on the list. Select in the popup menu the entry <b>Print complete list</b>. That prints the list as you see it. You can remove items from the list before printing without deleting the corresponding event/todo! Simply select all items you do not want to print out. Then right click on one of the items and choose <b>Hide selected items</b>. After that you can print the list without these items.","Sie können die <b>Listenansicht</b> und die Listenansicht im <b>Suchdialog</b> ausdrucken! Um das zu machen gehen Sie bitte zur <b>Listenansicht</b> oder zum <b>Suchdialog</b>. Rechtsklicken Sie auf die Liste. Wählen Sie im Popupmenu den Eintrag <b>Drucke komplette Liste</b>. Das druckt die Liste so, wie man sie sieht. Sie können Listeneinträge entfernen ohne die korrespondierenden Ereignisse/Todos zu löschen! Selektieren sie einfach alle Einträge, die sie nicht ausdrucken möchten. Dann Rechtsklicken Sie auf einen Eintrag und wählen <b>Verstecke Selektierte</b>. Danach können Sie die Liste ohne diese Einträge ausdrucken." },
 { "Configure KO/Pi...","Konfiguriere KO/Pi..." },
 { "Global Settings...","Globale Einstellungen..." },
 { "<p><b>R</b>: Toggle Resource View |<b>F</b>: Edit filter </p>\n","<p><b>R</b>: Zeige Resource Ansicht | <b>F</b>: Editiere Filter </p>\n" },
 { "(disabled)","(abgeschaltet)" },
 { "New Calendar","Neuer Kalender" },
 { "Calendar","Kalender" },
 { "Filter selector","Filterauswahl" },
 { "Filtermenu","Filtermenu" },
 { "Toggle Fullscreen","Vollbild umschalten" },
 { "Toggle Resource View","Resourcenansicht umschalten" },
 { "Storage HowTo...","Speicherort HowTo..." },
 { "Timetracking HowTo...","Timetracking HowTo..." },
 { "Juni","Juni" },
 { "Juli","Juli" },
 { "ToDo:","ToDo:" },
 { "Set Calendar","Setze Kalender" },
 { "Todo: %1","Todo: %1" },
 { ": (Prio ",": (Prio " },
 { "Todos","Todos" },
 { "Todo Viewer","Todo Anzeige" },
 { "Todo ","Todo " },
 { " Calendar \n Resource "," Kalender \n Resource " },
 { " Color "," Farbe " },
 { "The calendar <b>%1</b> is displaying file <b>%2</b>. Do you want to remove this calendar from KO/Pi? (The file is not removed!)","Der Kalender <b>%1</b> zeigt die Datei <b>%2</b>. Möchten Sie diesen Kalender aus KO/Pi entfernen? (Die Datei wird dabei nicht gelöscht!)" },
 { "The calendar <b>%1</b> is displaying file <b>%2</b>","Der Kalender <b>%1</b> zeigt die Datei <b>%2</b>" },
 { "Add new Calendar","Füge Kalender hinzu" },
 { "<b>Name of new calendar:</b>","<b>Name des Kalenders:</b>" },
 { "<b>Local ical (*.ics) file:</b>","<b>Lokale ical (*.ics) Datei:</b>" },
 { "Sorry, the calendar name is empty!","Sorry, der Kalendername ist leer!" },
 { "Sorry, the file name is empty!","Sorry, der Dateiname ist leer!" },
 { "Error loading calendar file\n%1.","Fehler beim Laden der Kalenderdatei\n%1." },
 { "The calendar <b>%1</b> is not loaded! Loading of file <b>%2</b> failed! <b>Try again to load the calendar?</b>","Der Kalender <b>%1</b> ist nicht geladen! Das Laden der Datei <b>%2</b> schlug fehl! <b>Soll erneut versucht werden den Kalender zu laden?</b>" },
 { "Global application font for all apps:","Globale Schriftart:" },
 { "Application Font","Applikationsschriftart" },
 { "Kx/Pi","Kx/Pi" },
 { "Backup","Backup" },
 { "KDE-Pim Global Settings","KDE-Pim Globale Einstellungen" },
 { "Sorry, the calendar name \n%1\nalready exists!\nPlease choose another name!","Sorry, der Kalendername \n%1\nist schon in Benutzung!\nBitte wählen Sie einen anderen!" },
 { "Sorry, the file \n%1\nis already loaded!\nPlease choose another file!","Sorry, die Datei \n%1\nist schon geladen!\nBitte wählen Sie eine andere!" },
 { "Choose Color","Wähle Farbe" },
 { " OK "," OK " },
 { " Cancel "," Abbrechen " },
 { "Matching items will be added to list","Passende werden zur Liste hinzugefügt" },
 { "Matching items will be removed from list","Passende werden von der Liste entfernt" },
 { "Search on displayed list only","Suche auf der dargestellten Liste" },
 { "List will be cleared before search","Liste wird vor der Suche gelöscht" },
 { "<center>%1</center> <center>is not running. Do you want to set\nthe state to running?</center>","<center>%1</center> <center>ist nicht am Laufen. Möchten Sie den Zustand auf "laufend" setzen?</center>" },
 { "%1\nis running!","%1\nist am Laufen!" },
 { "Additional Comment:","Zusätzlicher Kommentar:" },
 { "Stop and save","Stopp und Speichern" },
 { "Continue running","Weiter laufen lassen" },
 { "Stop - do not save","Stopp - nicht Speichern" },
 { "Do you really want to set\nthe state to stopped\nwithout saving the data?","Möchten sie den Zustand\nwirklich auf gestoppt setzen\nohne die Daten abzuspeichern?" },
 { "Time mismatch!","Zeiten stimmen nicht!" },
 { "The start time is\nafter the end time!","Die Startzeit ist\nhinter der Endzeit!" },
 { "Yes, stop todo","Ja, stoppe Todo" },
 { "Todo stopped - no data saved because runtime was < 15 sec!","Todo gestoppt - nichts gespeichert da Laufzeit < 15 sec!" },
 { "Todo started! Double click again to stop!","Todo gestartet! Doppelklicke um es zu stoppen!" },
 { "Please choose the <b>default calendar</b> in this column. Newly created or imported items are added to the default calendar.","Bitte wählen Sie den <b>Default-Kalender</b> in dieser Spalte. Neu angelegte oder importierte Einträge werden dem Default-Kalender hinzugefügt." },
 { "Spouse","Ehegatte" },
 { "Notes","Notizen" },
 { "Messanger","Messanger" },
 { "Assistant","Assistent" },
 { "Manager","Manager" },
 { "Secrecy","Sichtbar" },
 { "male","männlich" },
 { "female","weiblich" },
 { "Hide!","Verbergen!" },
 { "Show!","Anzeigen!" },
 { "Details","Details" },
 { "Profession","Beruf" },
 { "Children","Kinder" },
 { "Department","Abteilung" },
 { "Backup cancelled","Backup abgebrochen" },
 { "Backup globally disabled","Backup global abgeschaltet" },
 { "Backup succesfully finished","Backup erfolgreich beendet" },
 { "(Hint: You can enable automatic backup in the global settings!)","(Hinweis: Sie können ein automatisches Backup in den globalen Einstellungen konfigurieren!)" },
 { "This will <b>backup all calendar files</b> to the directory %1 %2","Das schreibt ein <b>Backup aller Kalenderdateien</b> in das Verzeichnis %1 %2" },
 { "Birthdays","Geburtstage" },
 { "KO/Pi import information!","KO/Pi Import Information!" },
 { "Start this todo\nand stop all running","Starte dieses Todo\nund stoppe alle Laufenden" },
 { "Cancel - do not start"," Abbrechen - Todo nicht starten" }, 
 { "The timezone has changed!\nShould the calendar be reloaded\nto shift the time of the events?\nPlease read Menu: Help->FAQ:\n"How do I change the timezone?"\nas well!","Die Zeitzone wurde geändert!\nSollen die Kalender neu geladen\nwerden num die Zeiten\nder Termine zu ändern?\nBitte lesen Sie auch\nMenu: Help->FAQ:\n"How do I change the timezone?"" },
 { "Reload","Neu laden" },
 { "Timezone settings","Zeitzoneneinstellung" },
 { "Title: ","Titel: " },
 { "Journal from: ","Journal vom: " },
 { "Journal: %1 from ","Journal: %1 vom " },
 { "<b>Click here to edit categories: </b>","<b>Klicke hier um Kategorien zu ändern: </b>" },
 { "Selected Item","Ausgewähltes Item" },
 { "Select Date...","Wähle Datum..." },
 { "After importing/loading/syncing there may be new categories in events or todos which are not added automatically to the category list. Please choose what to do <b>now</b>:","Nach dem Importieren/Laden/Syncen kann es neue Kategorien in den Terminen oder Todos geben, die nicht automatisch der Kategorieliste hinzugefügt werden. Bitte wählen Sie, was <b>jetzt</b> passieren soll:" },
 { "Change category list now!","Ändere Kategorieliste jetzt!" },
 { "Edit category list...","Ändere Kategorieliste..." },
 { "Toolbar changes needs a restart!","Neustart benötigt für Toolbaränderungen!" },
 { "Filepath: ","Dateipfad: " },
 { "You can try to reload the calendar in the Resource View!","In der Resourcenansicht können Sie erneut versuchen den Kalender zu laden!" },
 { "<b>WARNING:</b> There is a pending suspended alarm!","<b>WARNUNG:</b> Es gibt einen laufenden Suspendalarm!" },
 { "Pending Suspend Alarm","Laufender Suspend Alarm" },
 { "Error loading calendar %1","Fehler beim Laden von Kalender %1" },
 { "Calendar(s) not loaded:","Nicht geladene(r) Kalender:" },
 { "Loding of calendar(s) failed","Laden von Kalendern fehlgeschlagen" },
 { "Alarm Options","Alarm Einstellungen" },
 { "Delete selected...","Lösche Ausgewählte..." },
 { "None","Nichts" },
 { "Selection","Auswahl" },
 { "Set categories","Setze Kategorien" },
 { "This adds the selected\nitems to the calendar\n%1\nand removes them from\ntheir current calendar!","Das fügt die ausgewählten\nEinträge dem Kalender\n%1\nhinzu und entfernt sie von\nihrem aktuellen Kalender!" },
 { "Reset","Neu setzen" },
 { "Do you want to <b>add</b> categories to the selected items or <b>reset</b> the list (i.e. remove current categories)?","Möchten Sie Kategorien zu den ausgewählten Einträgen <b>hinzufügen</b> oder die Liste <b>neu setzen</b> (d.h. vorhandene Kategorien löschen)?" },
 { "The file\n%1\ndoes not exist!\nShall I create it for you?","Die Datei\n%1\nexistiert nicht!\nSoll sie neu angelegt werden?" },
 { "Sorry, cannot create the file\n%1!\nNo calendar added!","Kann leider die Datei\n%1\nnicht anlegen!\nKein Kalender hinzugefügt!" },
 { "\nNO\n WRITEABLE\n   CALENDAR\n      FOUND!\n\nPlease fix your calendar settings!\n","\nKEIN\n  SCHREIBBARER\n    KALENDER\n      GEFUNDEN!\n\nBitte korrigieren Sie\nihre Kalendereinstellungen!\n" },
 { "\nThe file\n%1\non disk has changed!\nFile size: %2 bytes.\nLast modified: %3\nDo you want to:\n\n - Save and overwrite file?\n - Sync with file, then save?\n - Cancel without saving? \n","\nDie Datei\n%1\nwurde verändert!\nDatei Grösse: %2 Bytes.\nZuletzt geändert: %3\nMöchten Sie:\n\n - Speichern und die Datei überschreiben?\n - Mit Datei Synchronisieren, dann speichern?\n - Abbrechen ohne zu speichern? \n" },
 { "Edit","Edit" },
 { "Last Modified","Zuletzt geändert" },
 { "Journal viewer","Journal Anzeige" },
 { "Configure Calendar Files...","Konfiguriere Kalenderdateien..." },
 { "You can use and display <b>more than one</b> calendar file in KO/Pi. A calendar file is called a <b>resource</b>. To add a calendar or change calendar settings please use menu: <b>View -> Toggle Resource View</b>.","Sie können <b>mehr als eine</b> Kalenderdatei in KO/Pi darstellen und benutzen. Eine Kalenderdatei wird <b>Resource</b> genannt. Um einen Kalender hinzuzufügen oder die Kalendereinstellungen zu ändern benutzen Sie bitte das Menu: <b>Ansicht -> Resourcenansicht umschalten</b>." },
 { "Hide Completed","Verstecke erledigte Todos" },
 { "Show not Running","Zeige nicht Laufende" },
 { "Click to add new Todo","Klick für neues Todo!" },
 { "Show next conflict for","Zeige nächsten Konflikt für" },
 { "All events","Alle Termine" },
 { "Allday events","Ganztagestermine" },
 { "Events with time","Termine mit Zeit" },
 { "No conflict found","Kein Konflikt gefunden" },
 { "Conflict %1 <-> %2","Konflikt %1 <-> %2" },
 { "<p><b>Q</b>: Show next date with conflicting events\n ","<p><b>Q</b>: Zeige nächstes Datum mit Terminen im Konflikt\n " },
 { "Week view mode uses row layout","Wochenansicht Modus nutzt Reihenlayout" },
 { "The event\n%1\nconflicts with event\n%2\nat date\n%3.\n","Der Termin\n%1\nist im Konflikt mit Termin\n%2\nam Datum\n%3.\n" },
 { "KO/Pi Conflict delected","KO/Pi Konflikt erkannt" },
 { "Show date","Zeige Datum" },
 { "No problem!","Null Problemo!" },
 { "Automatically sync with KDE-Desktop\nwhen receiving sync request","Synce automatisch mit KDE-Desktop\nwenn eine Sync-Anforderung kommt" },
 { "Pi-Sync Port Error","Pi-Sync Port Fehler" },
 { "<b>Enabling Pi-Sync failed!</b> Failed to bind or listen to the port %1! Is another instance already listening to that port?","<b>Anschalten von Pi-Sync fehlgeschlagen!</b> Fehler beim Ansprechen des Ports %1! Ist bereits eine andere Anwendung dabei diesen Port zu nutzen?" },
 { "No valid port number:\n%1","Keine gültige Port Nummer:\n%1" },
 { "Port number (Default: %1)\nValid range from 1 to 65535","Port Nummer (Standard: %1)\nGültiger Bereich von 1 bis 65535" },
 { "Pi-Sync Error","Pi-Sync Fehler" },
 { "Got send file request\nwith invalid password","Erhielt "sende Datei" Anfrage\nmit ungültigem Passwort" },
 { "Got receive file request\nwith invalid password","Erhielt "empfange Datei" Anfrage\nmit ungültigem Passwort" },
 { "Wrong password: Receiving remote file failed.","Falsches Passwort: Empfangen von entfernter Datei fehlgeschlagen." },
 { "Please close error dialog on remote.","Bitte schließe Fehler-Dialog am entfernten Rechner" },
 { "Unknown error on remote.","Unbekannter Fehler am entfernten Rechner" },
 { "Pi-Sync: Connected!","Pi-Sync: Verbunden!" },
 { "Receiving file from remote...","Empfange entfernte Datei..." },
 { "Sending back synced file...","Sende synchronisierte Datei zurück..." },
 { "Do you want to\nclear all sync info\nof all profiles?","Möchten Sie wirklich\ndie Sync-Info\nfür alle Profile\nlöschen?" },
 { "Do you want to\nclear the sync\ninfo of profile\n%1?\n","Möchten Sie wirklich\ndie Sync-Info für Profil\n%1?\nlöschen" },
 { "Sorry, no valid port.Syncing cancelled.","Sorry, kein gültiger Port. Syncing abgebrochen." },
 { "Remote port number:\n(May be: 1 - 65535)","Ferne Port Nummer:\n(Darf sein: 1 - 65535)" },
 { "Writing back file ...","Schreibe Datei zurück..." },
 { "Sending back file ...","Sende Datei zurück..." },
 { "Eeek, there I am ticklish!","Hihi, da bin ich kitzlig!" },
 { "Created","Angelegt" },
 { "Last Modified Sub","Zuletzt geändertes Sub" },
 { "Checking conflicts ... please wait","Überprüfe Konflikte ... bitte warten" },
 { "Show times on two lines","Zeige Zeiten auf zwei Zeilen" },
 { "Save using LOCAL storage","Speichere nutze LOCAL Pfad" },
+{ "Duration","Dauer" },
+{ " day"," Tag" }, 
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
diff --git a/korganizer/koeditorgeneraltodo.cpp b/korganizer/koeditorgeneraltodo.cpp
index 965cf47..10d9a8c 100644
--- a/korganizer/koeditorgeneraltodo.cpp
+++ b/korganizer/koeditorgeneraltodo.cpp
@@ -1,379 +1,378 @@
 /*
     This file is part of KOrganizer.
     Copyright (c) 2000,2001 Cornelius Schumacher <schumacher@kde.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 #include <qtooltip.h>
 #include <qfiledialog.h>
 #include <qlayout.h>
 #include <qvbox.h>
 #include <qbuttongroup.h>
 #include <qvgroupbox.h>
 #include <qwidgetstack.h>
 #include <qdatetime.h>
 #include <qapplication.h>
 
 #include <kglobal.h>
 #include <klocale.h>
 #include <kiconloader.h>
 #include <kmessagebox.h>
 #include <kdebug.h>
 #include <krestrictedline.h>
 #include <kstandarddirs.h>
 #include <kfiledialog.h>
 #include <kdialog.h>
 
 #include <libkcal/todo.h>
 
 #include <libkdepim/kdateedit.h>
 
 #include "koprefs.h"
 #include "ktimeedit.h"
 
 #include "koeditorgeneraltodo.h"
 #include "kolocationbox.h"
 
 KOEditorGeneralTodo::KOEditorGeneralTodo(QObject* parent,
                                          const char* name)
   : KOEditorGeneral( parent, name)
 {
 }
 
 KOEditorGeneralTodo::~KOEditorGeneralTodo()
 {
 }
 
 void KOEditorGeneralTodo::finishSetup()
 {
 
 //   QWidget::setTabOrder(mSummaryEdit, mLocationEdit);
 //   QWidget::setTabOrder(mLocationEdit, mDueCheck);
 //   QWidget::setTabOrder(mDueCheck, mDueDateEdit);
 //   QWidget::setTabOrder(mDueDateEdit, mDueTimeEdit);
 //   QWidget::setTabOrder(mDueTimeEdit, mStartCheck);
 //   QWidget::setTabOrder(mStartCheck, mStartDateEdit);
 //   QWidget::setTabOrder(mStartDateEdit, mStartTimeEdit);
 //   QWidget::setTabOrder(mStartTimeEdit, mTimeButton);
 //   QWidget::setTabOrder(mTimeButton, mCompletedCombo);
 //   QWidget::setTabOrder(mCompletedCombo, mPriorityCombo);
 //   QWidget::setTabOrder(mPriorityCombo, mAlarmButton);
 //   QWidget::setTabOrder(mAlarmButton, mCategoriesButton);
 //   QWidget::setTabOrder(mCategoriesButton, mSecrecyCombo);
 //   QWidget::setTabOrder(mSecrecyCombo, mDescriptionEdit);
    mSummaryEdit->load(KOLocationBox::SUMMARYTODO);
   mSummaryEdit->setFocus();
 }
 
 void KOEditorGeneralTodo::initTime(QWidget *parent,QBoxLayout *topLayout)
 {
   QBoxLayout *timeLayout = new QVBoxLayout(topLayout);
 
   QGroupBox *timeGroupBox = new QGroupBox(1,QGroupBox::Horizontal,
                                           i18n("Date && Time"),parent);
   timeLayout->addWidget(timeGroupBox);
   timeGroupBox->layout()->setSpacing( KDialog::spacingHint()-2 ); 
   timeGroupBox->layout()->setMargin(  KDialog::marginHint() ); 
   QFrame *timeBoxFrame = new QFrame(timeGroupBox);
 
   QGridLayout *layoutTimeBox = new QGridLayout(timeBoxFrame,3,3);
   layoutTimeBox->setSpacing(KDialog::spacingHintSmall());
   layoutTimeBox->setColStretch( 1, 1 );
 
+  mStartCheck = new QCheckBox(i18n("Start:"),timeBoxFrame);
+  layoutTimeBox->addWidget(mStartCheck,0,0);
+  connect(mStartCheck,SIGNAL(toggled(bool)),SLOT(enableStartEdit(bool)));
+
+  mStartDateEdit = new KDateEdit(timeBoxFrame);
+  layoutTimeBox->addWidget(mStartDateEdit,0,1);
+
+  mStartTimeEdit = new KOTimeEdit(timeBoxFrame);
+  layoutTimeBox->addWidget(mStartTimeEdit,0,2);
+
   mDueCheck = new QCheckBox(i18n("Due:"),timeBoxFrame);
   layoutTimeBox->addWidget(mDueCheck,1,0);
   connect(mDueCheck,SIGNAL(toggled(bool)),SLOT(enableDueEdit(bool)));
   connect(mDueCheck,SIGNAL(toggled(bool)),SLOT(showAlarm()));
   
   
   mDueDateEdit = new KDateEdit(timeBoxFrame);
   layoutTimeBox->addWidget(mDueDateEdit,1,1);
 
   mDueTimeEdit = new KOTimeEdit(timeBoxFrame);
   layoutTimeBox->addWidget(mDueTimeEdit,1,2);
 
 
-  mStartCheck = new QCheckBox(i18n("Start:"),timeBoxFrame);
-  layoutTimeBox->addWidget(mStartCheck,0,0);
-  connect(mStartCheck,SIGNAL(toggled(bool)),SLOT(enableStartEdit(bool)));
-
-  mStartDateEdit = new KDateEdit(timeBoxFrame);
-  layoutTimeBox->addWidget(mStartDateEdit,0,1);
-
-  mStartTimeEdit = new KOTimeEdit(timeBoxFrame);
-  layoutTimeBox->addWidget(mStartTimeEdit,0,2);
-
-
   mTimeButton = new QCheckBox(i18n("Time associated"),timeBoxFrame);
   layoutTimeBox->addMultiCellWidget(mTimeButton,2,2,0,1);
 
   connect(mTimeButton,SIGNAL(toggled(bool)),SLOT(enableTimeEdits(bool)));
   connect(mDueDateEdit,SIGNAL(setTimeTo(QTime)),mDueTimeEdit,SLOT(setTime(QTime)));
   connect(mStartDateEdit,SIGNAL(setTimeTo(QTime)),mStartTimeEdit,SLOT(setTime(QTime)));
   connect(mStartDateEdit, SIGNAL(dateChanged(QDate)),
           this, SLOT(startDateChanged(QDate)));
   // some more layouting
   //layoutTimeBox->setColStretch(3,1);  
 }
 
 
 void KOEditorGeneralTodo::initCompletion(QWidget *parent, QBoxLayout *topLayout)
 {
   mCompletedCombo = new QComboBox(parent);
   // xgettext:no-c-format
   mCompletedCombo->insertItem(i18n("  0 %"));
   // xgettext:no-c-format
   mCompletedCombo->insertItem(i18n(" 20 %"));
   // xgettext:no-c-format
   mCompletedCombo->insertItem(i18n(" 40 %"));
   // xgettext:no-c-format
   mCompletedCombo->insertItem(i18n(" 60 %"));
   // xgettext:no-c-format
   mCompletedCombo->insertItem(i18n(" 80 %"));
   // xgettext:no-c-format
   mCompletedCombo->insertItem(i18n("100 %"));
   connect(mCompletedCombo,SIGNAL(activated(int)),SLOT(completedChanged(int)));
   topLayout->addWidget(mCompletedCombo);
 
   mCompletedLabel = new QLabel(i18n("completed"),parent);
   topLayout->addWidget(mCompletedLabel); 
 
   mCompleteDateEdit = new KDateEdit(parent);
   topLayout->addWidget(mCompleteDateEdit ); 
 
   mCompleteTimeEdit = new KOTimeEdit(parent);
   topLayout->addWidget( mCompleteTimeEdit); 
 
   mCompletedCombo->setSizePolicy( QSizePolicy( QSizePolicy::Preferred,QSizePolicy::Preferred) );
   mCompletedLabel->setSizePolicy( QSizePolicy( QSizePolicy::Expanding,QSizePolicy::Preferred) );
   connect(mCompleteDateEdit,SIGNAL(setTimeTo(QTime)),mCompleteTimeEdit,SLOT(setTime(QTime)));
 
   if (  QApplication::desktop()->width() <= 480 ) {
       if (  QApplication::desktop()->width() < 320 )
           mCompleteDateEdit->setMaximumWidth( 85 );
       else 
           mCompleteDateEdit->setMaximumWidth( 140 );
       topLayout->setSpacing( 0 );
   }
 }
 
 void KOEditorGeneralTodo::initPriority(QWidget *parent, QBoxLayout *topLayout)
 {
 
     QHBox* h = new QHBox ( parent );
     topLayout->addWidget( h );
   QLabel *priorityLabel = new QLabel(i18n("Priority:"), h);
   // topLayout->addWidget(priorityLabel);
   mPriorityCombo = new QComboBox( h );
   mPriorityCombo->insertItem(i18n("1 (high)"));
   mPriorityCombo->insertItem(i18n("2"));
   mPriorityCombo->insertItem(i18n("3"));
   mPriorityCombo->insertItem(i18n("4"));
   mPriorityCombo->insertItem(i18n("5 (low)"));
   //topLayout->addWidget(mPriorityCombo);
 }
 
 void KOEditorGeneralTodo::initStatus(QWidget *parent,QBoxLayout *topLayout)
 {
   QBoxLayout *statusLayout = new QHBoxLayout(topLayout);
 
   initCompletion( parent, statusLayout );
 
   statusLayout->addStretch( 1 );
 
   initPriority( parent, statusLayout );
 }
 
 void KOEditorGeneralTodo::setDefaults(QDateTime due,bool allDay)
 {
 
   mSummaryEdit->load(KOLocationBox::SUMMARYTODO);
   mLocationEdit->load(KOLocationBox::LOCATION);
   KOEditorGeneral::setDefaults(allDay);
 
   mTimeButton->setChecked( !allDay );
   if(mTimeButton->isChecked()) {
     mTimeButton->setEnabled(true);
   }
   else {
     mTimeButton->setEnabled(false);
   }
   
   enableTimeEdits( !allDay );
   if ( due.isValid() ) {
       mDueCheck->setChecked(true);
       enableDueEdit(true);
       alarmDisable(false);
   } else {
       mDueCheck->setChecked(false);
       enableDueEdit(false);
       due = QDateTime::currentDateTime().addDays(7);
       alarmDisable(true);
   }
 
   
   mStartCheck->setChecked(false);
   enableStartEdit(false);
 
   mDueDateEdit->setDate(due.date());
   mDueTimeEdit->setTime(due.time());
   due = due.addDays(-7);
   mStartDateEdit->setDate(due.date());
   mStartTimeEdit->setTime(due.time());  
 
   mPriorityCombo->setCurrentItem(2);
   mCompletedLabel->setText(i18n(" completed"));;
   mCompletedCombo->setCurrentItem(0);
   mCompleteDateEdit->hide();
   mCompleteTimeEdit->hide();
 }
 
 void KOEditorGeneralTodo::readTodo(Todo *todo)
 {
 
   mSummaryEdit->load(KOLocationBox::SUMMARYTODO);
   mLocationEdit->load(KOLocationBox::LOCATION);
   KOEditorGeneral::readIncidence(todo);
 
   QDateTime dueDT;
   
   if (todo->hasDueDate()) {
     enableAlarmEdit(true);
     dueDT = todo->dtDue();
     mDueDateEdit->setDate(todo->dtDue().date());
     mDueTimeEdit->setTime(todo->dtDue().time());
     mDueCheck->setChecked(true);
   } else {
     alarmDisable(true);
     mDueDateEdit->setEnabled(false);
     mDueTimeEdit->setEnabled(false);
     mDueDateEdit->setDate(QDate::currentDate());
     mDueTimeEdit->setTime(QTime::currentTime());
     mDueCheck->setChecked(false);
   }
 
   if (todo->hasStartDate()) {
     mStartDateEdit->setDate(todo->dtStart().date());
     mStartTimeEdit->setTime(todo->dtStart().time());
     mStartCheck->setChecked(true);
   } else {
     mStartDateEdit->setEnabled(false);
     mStartTimeEdit->setEnabled(false);
     mStartDateEdit->setDate(QDate::currentDate());
     mStartTimeEdit->setTime(QTime::currentTime());
     mStartCheck->setChecked(false);
   }
 
   mTimeButton->setChecked( !todo->doesFloat() );
 
   mCompletedCombo->setCurrentItem(todo->percentComplete() / 20);
   if (todo->isCompleted() && todo->hasCompletedDate()) {
     mCompleted = todo->completed();
   }
   setCompletedDate();
 
   mPriorityCombo->setCurrentItem(todo->priority()-1);
 }
 
 void KOEditorGeneralTodo::writeTodo(Todo *todo)
 {
   KOEditorGeneral::writeIncidence(todo);
 
   // temp. until something better happens.
   QString tmpStr;
   
   todo->setHasDueDate(mDueCheck->isChecked());
   todo->setHasStartDate(mStartCheck->isChecked());
 
   QDate tmpDate;
   QTime tmpTime;
   QDateTime tmpDT;
   if ( mTimeButton->isChecked() ) {
     todo->setFloats(false);
     
     // set due date/time
     tmpDate = mDueDateEdit->date();
     tmpTime = mDueTimeEdit->getTime();
     tmpDT.setDate(tmpDate);
     tmpDT.setTime(tmpTime);
     todo->setDtDue(tmpDT);
 
     // set start date/time
     tmpDate = mStartDateEdit->date();
     tmpTime = mStartTimeEdit->getTime();
     tmpDT.setDate(tmpDate);
     tmpDT.setTime(tmpTime);
     todo->setDtStart(tmpDT);
   } else {
     todo->setFloats(true);
 
     // need to change this.
     tmpDate = mDueDateEdit->date();
     tmpTime.setHMS(0,0,0);
     tmpDT.setDate(tmpDate);
     tmpDT.setTime(tmpTime);
     todo->setDtDue(tmpDT);
     
     tmpDate = mStartDateEdit->date();
     tmpTime.setHMS(0,0,0);
     tmpDT.setDate(tmpDate);
     tmpDT.setTime(tmpTime);
     todo->setDtStart(tmpDT);
   }
   todo->setPriority(mPriorityCombo->currentItem()+1);
 
   // set completion state
   if ( mCompletedCombo->currentItem() == 5 ) {
       QDateTime comp ( mCompleteDateEdit->date(), mCompleteTimeEdit->getTime() );
       if ( comp.isValid () ) {
           todo->setPercentComplete(100);
           todo->setCompleted(comp);
       } else {
           todo->setPercentComplete( 100 );
           if ( mCompleted.isValid() )
               todo->setCompleted(mCompleted);
       }
   } else {
       todo->setPercentComplete(mCompletedCombo->currentItem() * 20);
   }
 
   mSummaryEdit->save(KOLocationBox::SUMMARYTODO);
 }
 
 void KOEditorGeneralTodo::enableDueEdit(bool enable)
 {
   mDueDateEdit->setEnabled( enable );
 
   if(mDueCheck->isChecked() || mStartCheck->isChecked()) {
     mTimeButton->setEnabled(true);
   }
   else {
     mTimeButton->setEnabled(false);
     mTimeButton->setChecked(false);
   }
   
   if (enable) {
     mDueTimeEdit->setEnabled( mTimeButton->isChecked() );
   } else {
     mDueTimeEdit->setEnabled( false );
   }
   emit datesChecked();
 }
 
diff --git a/korganizer/kolistview.cpp b/korganizer/kolistview.cpp
index e7a5e0e..e560ce4 100644
--- a/korganizer/kolistview.cpp
+++ b/korganizer/kolistview.cpp
@@ -1,560 +1,555 @@
 /*
     This file is part of KOrganizer.
     Copyright (c) 1999 Preston Brown
     Copyright (c) 2000,2001 Cornelius Schumacher <schumacher@kde.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 #include <qlistview.h>
 #include <qlayout.h>
 #include <qlabel.h>
 #include <qpopupmenu.h>
 #include <qprogressbar.h>
 #include <qfileinfo.h>
 #include <qmessagebox.h>
 #include <qdialog.h>
 #include <qtextstream.h>
 #include <qdir.h>
 #include <qwhatsthis.h>
 #include <qregexp.h>
 #include <qpainter.h>
 #include <qpaintdevicemetrics.h>
 
 #include <klocale.h>
 #include <kdebug.h>
 #include <kiconloader.h>
 #include <kglobal.h>
 
 #include <libkdepim/kpimglobalprefs.h>
 #include <libkcal/calendar.h>
 #include <libkcal/calendarlocal.h>
 #include <libkcal/icalformat.h>
 #include <libkcal/vcalformat.h>
 #include <libkcal/recurrence.h>
 #include <libkcal/filestorage.h>
 #include <libkdepim/categoryselectdialog.h>
 #include <libkcal/kincidenceformatter.h>
 #ifndef DESKTOP_VERSION
 #include <qpe/qpeapplication.h>
 #else
 #include <qapplication.h>
 #endif
 
 #ifndef KORG_NOPRINTER
 #include "calprinter.h"
 #endif
 #include "koglobals.h"
 #include "koprefs.h"
 #include "kfiledialog.h"
 
 #include "kolistview.h"
 #include "koeventviewer.h"
 
 extern QPixmap* sgListViewCompletedPix[6];
 extern QPixmap* sgListViewJournalPix;
 
 class KOListViewWhatsThis :public QWhatsThis
 {
 public:
   KOListViewWhatsThis( QWidget *wid, KOListView* view ) : QWhatsThis( wid ), _wid(wid),_view (view) { };
 
 protected:
   virtual QString text( const QPoint& p)
   {
     return _view->getWhatsThisText(p) ;
   }
 private:
   QWidget* _wid;
   KOListView * _view;
 };
 
 
 ListItemVisitor::ListItemVisitor(KOListViewItem *item, QDate date )
 {
     mItem = item;
     mDate = date;
 }
 
 ListItemVisitor::~ListItemVisitor()
 {
 }
 
 bool ListItemVisitor::visit(Event *e)
 {
     bool ok = false;
     QString start, end;
     QDate ds, de;
     if ( e->doesRecur() ) {
         ds = e->getNextOccurence( QDateTime( mDate, QTime(0,0,0)), &ok ).date();
         if ( ok ) {
             int days = e->dtStart().date().daysTo(e->dtEnd().date() );
             start = KGlobal::locale()->formatDate(ds,true);
             de = ds.addDays( days);
             end = KGlobal::locale()->formatDate(de,true);
         }
 
     } 
     if ( ! ok ) {
         start =e->dtStartDateStr();
         end = e->dtEndDateStr();
         ds = e->dtStart().date();
         de = e->dtEnd().date();
     }
     mItem->setText(0,e->summary());
     mItem->setText(1,start);
     if ( e->doesFloat() )
         mItem->setText(2,"---");
     else
         mItem->setText(2,e->dtStartTimeStr());
     mItem->setText(3,end);
     if ( e->doesFloat() )
         mItem->setText(4,"---");
     else
         mItem->setText(4,e->dtEndTimeStr());
+    mItem->setText(5, e->durationText());
     if ( e->isAlarmEnabled() ) {
-        mItem->setText(5,e->alarms().first()->offsetText() );
+        mItem->setText(6,e->alarms().first()->offsetText() );
     } else {
-        mItem->setText(5, i18n("No"));
+        mItem->setText(6, i18n("No"));
     }
-    mItem->setText(6, e->recurrenceText());
+    mItem->setText(7, e->recurrenceText());
     if( ! e->doesRecur() )
-        mItem->setSortKey( 6, "-" );
-    mItem->setText(7,"---");
-    mItem->setText(8,"---");
-    mItem->setText(9, e->cancelled() ? i18n("Yes") : i18n("No"));
-    mItem->setText(10,e->categoriesStr());
-    mItem->setText(11, KOPrefs::instance()->calName( e->calID() ));
-    mItem->setText(12, KGlobal::locale()->formatDateTime( e->lastModified(), true, true ));
+        mItem->setSortKey( 7, "-" );
+    mItem->setText(8, e->cancelled() ? i18n("Yes") : i18n("No"));
+    mItem->setText(9,e->categoriesStr());
+    mItem->setText(10, KOPrefs::instance()->calName( e->calID() ));
+    mItem->setText(11, KGlobal::locale()->formatDateTime( e->lastModified(), true, true ));
 
     QString key; 
     QDate d = e->lastModified().date();
     QTime t = e->lastModified().time();
     key.sprintf("%04d%02d%02d%02d%02d%02d",d.year(),d.month(),d.day(),t.hour(),t.minute(),t.second() );
     mItem->setSortKey(12,key);
     t = e->doesFloat() ? QTime(0,0) : e->dtStart().time();
     key.sprintf("%04d%02d%02d%02d%02d",ds.year(),ds.month(),ds.day(),t.hour(),t.minute());
     mItem->setSortKey(1,key);
 
     t = e->doesFloat() ? QTime(0,0) : e->dtEnd().time();
     key.sprintf("%04d%02d%02d%02d%02d",de.year(),de.month(),de.day(),t.hour(),t.minute());
     mItem->setSortKey(3,key);
     return true;
 }
 
 bool ListItemVisitor::visit(Todo *t)
 {
     mItem->setText(0,t->summary());
     if ( t->isCompleted() ) {
         mItem->setSortKey(0,"99"+ t->summary().left(10));
     } else 
         mItem->setSortKey(0,QString::number( t->percentComplete()+1 )+ t->summary().left(10));
     mItem->setPixmap( 0, *(sgListViewCompletedPix[t->percentComplete()/20]));
     if (t->hasStartDate()) {
         mItem->setText(1,t->dtStartDateStr());
         if (t->doesFloat()) {
             mItem->setText(2,"---");
         } else {
             mItem->setText(2,t->dtStartTimeStr());
         }
     } else {
         mItem->setText(1,"---");
         mItem->setText(2,"---");
     }
-    mItem->setText(3,"---");
-    mItem->setText(4,"---");  
     if ( t->isAlarmEnabled() ) {
-        mItem->setText(5,t->alarms().first()->offsetText() );
+        mItem->setText(6,t->alarms().first()->offsetText() );
     } else {
-        mItem->setText(5, i18n("No"));
+        mItem->setText(6, i18n("No"));
     }
-    mItem->setText(6, t->recurrenceText());
+    mItem->setText(7, t->recurrenceText());
     if( ! t->doesRecur() )
-        mItem->setSortKey( 6, "-" );
+        mItem->setSortKey( 7, "-" );
     if (t->hasDueDate()) {
-        mItem->setText(7,t->dtDueDateStr());
+        mItem->setText(3,t->dtDueDateStr());
         if (t->doesFloat()) {
-            mItem->setText(8,"---");
+            mItem->setText(4,"---");
         } else {
-            mItem->setText(8,t->dtDueTimeStr());
+            mItem->setText(4,t->dtDueTimeStr());
         }
     } else {
-        mItem->setText(7,"---");
-        mItem->setText(8,"---");
+        mItem->setText(3,"---");
+        mItem->setText(4,"---");
     }
-    mItem->setText(9, t->cancelled() ? i18n("Yes") : i18n("No"));
-    mItem->setText(10,t->categoriesStr());
-    mItem->setText(11, KOPrefs::instance()->calName( t->calID() ));
-    mItem->setText(12, KGlobal::locale()->formatDateTime( t->lastModified(), true, true ));
+    mItem->setText(5, t->durationText());
+    mItem->setText(8, t->cancelled() ? i18n("Yes") : i18n("No"));
+    mItem->setText(9,t->categoriesStr());
+    mItem->setText(10, KOPrefs::instance()->calName( t->calID() ));
+    mItem->setText(11, KGlobal::locale()->formatDateTime( t->lastModified(), true, true ));
     QString key;
     QDate d = t->lastModified().date();
     QTime tm = t->lastModified().time();
     key.sprintf("%04d%02d%02d%02d%02d%02d",d.year(),d.month(),d.day(),tm.hour(),tm.minute(),tm.second() );
-    mItem->setSortKey(12,key);
+    mItem->setSortKey(11,key);
     if (t->hasDueDate()) {
         d = t->dtDue().date();
         tm = t->doesFloat() ? QTime(0,0) : t->dtDue().time();
         key.sprintf("%04d%02d%02d%02d%02d",d.year(),d.month(),d.day(),tm.hour(),tm.minute());
-        mItem->setSortKey(7,key);
+        mItem->setSortKey(3,key);
     }
     if ( t->hasStartDate() ) {
         d = t->dtStart().date();
         tm = t->doesFloat() ? QTime(0,0) : t->dtStart().time();
         key.sprintf("%04d%02d%02d%02d%02d",d.year(),d.month(),d.day(),tm.hour(),tm.minute());
         mItem->setSortKey(1,key);
     }
     return true;
 }
 
 bool ListItemVisitor::visit(Journal * j)
 { 
     
     QString des;
     mItem->setPixmap( 0, *sgListViewJournalPix);
     if ( !j->summary().isEmpty() ) {
         des = j->summary();
     } else {
         des = j->description().left(30);
         des = des.simplifyWhiteSpace ();
         des.replace (QRegExp ("\\n"),"" );
         des.replace (QRegExp ("\\r"),"" );
     }
     mItem->setText(0,des.left(25));
     mItem->setSortKey(0,"0"+ des.left(25));
     mItem->setText(1,j->dtStartDateStr());
     mItem->setText(2,"---");
     mItem->setText(3,"---");
     mItem->setText(4,"---");
     mItem->setText(5,"---");
     mItem->setText(6,"---");
-    mItem->setText(7,j->dtStartDateStr());
+    mItem->setText(7,"---");
     mItem->setText(8,"---");
-    mItem->setText(9,"---");
-    mItem->setText(10,j->categoriesStr());
-    mItem->setText(11, KOPrefs::instance()->calName( j->calID() ));
-    mItem->setText(12, KGlobal::locale()->formatDateTime( j->lastModified(), true, true ));
+    mItem->setText(9,j->categoriesStr());
+    mItem->setText(10, KOPrefs::instance()->calName( j->calID() ));
+    mItem->setText(11, KGlobal::locale()->formatDateTime( j->lastModified(), true, true ));
 
     QString key; 
     QDate d = j->lastModified().date();
     QTime tm = j->lastModified().time();
     key.sprintf("%04d%02d%02d%02d%02d%02d",d.year(),d.month(),d.day(),tm.hour(),tm.minute(),tm.second() );
     mItem->setSortKey(12,key);
     d = j->dtStart().date();
     key.sprintf("%04d%02d%02d",d.year(),d.month(),d.day());
     mItem->setSortKey(1,key);
     mItem->setSortKey(7,key);
 
     return true;
 }
 
 KOListView::KOListView(Calendar *calendar, QWidget *parent,
                        const char *name)
     : KOEventView(calendar, parent, name)
 {
     
     mActiveItem = 0;
     mForceShowCompletedTodos = false;
     mListView = new KOListViewListView(this);
     mListView->addColumn(i18n("Summary"));
     mListView->addColumn(i18n("Start Date"));
     mListView->addColumn(i18n("Start Time"));
-    mListView->addColumn(i18n("End Date"));
-    mListView->addColumn(i18n("End Time"));
+    mListView->addColumn(i18n("End/Due Date"));
+    mListView->addColumn(i18n("End/Due Time"));
+    mListView->addColumn(i18n("Duration"));
     mListView->addColumn(i18n("Alarm")); // alarm set?
     mListView->addColumn(i18n("Recurs")); // recurs?
-    mListView->addColumn(i18n("Due Date"));
-    mListView->addColumn(i18n("Due Time"));
     mListView->addColumn(i18n("Cancelled"));
     mListView->addColumn(i18n("Categories"));
     mListView->addColumn(i18n("Calendar"));
     mListView->addColumn(i18n("Last Modified"));
 
     mListView->setColumnAlignment(0,AlignLeft);
     mListView->setColumnAlignment(1,AlignLeft);
     mListView->setColumnAlignment(2,AlignHCenter);
     mListView->setColumnAlignment(3,AlignLeft);
     mListView->setColumnAlignment(4,AlignHCenter);
     mListView->setColumnAlignment(5,AlignLeft);
     mListView->setColumnAlignment(6,AlignLeft);
     mListView->setColumnAlignment(7,AlignLeft);
     mListView->setColumnAlignment(8,AlignLeft);
     mListView->setColumnAlignment(9,AlignLeft);
     mListView->setColumnAlignment(10,AlignLeft);
     mListView->setColumnAlignment(11,AlignLeft);
-    mListView->setColumnAlignment(12,AlignLeft);
     mKOListViewWhatsThis = new KOListViewWhatsThis(mListView->viewport(),this);
 
     int iii = 0;
-    for ( iii = 0; iii< 13 ; ++iii )
+    for ( iii = 0; iii< 12 ; ++iii )
         mListView->setColumnWidthMode( iii, QListView::Manual );
 
     QBoxLayout *layoutTop = new QVBoxLayout(this);
     layoutTop->addWidget(mListView);
     mListView->setFont ( KOPrefs::instance()->mListViewFont );
     mPopupMenu = eventPopup();
     QPopupMenu* selPopup = new QPopupMenu ( this );
     mPopupMenu->insertSeparator();
     
     selPopup->insertItem(i18n("All"),this,
                                   SLOT(allSelection()));
     selPopup->insertItem(i18n("None"),this,
                                   SLOT(clearSelection()));
     selPopup->insertItem(i18n("Delete selected..."),this,
                                   SLOT(deleteAll()));
     mPopupMenu->insertItem(i18n("Selection"), selPopup );
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Hide all selected"),this,
                                   SLOT(hideAll()),true);
 
     selPopup->insertSeparator();
     QPopupMenu * exportPO = new QPopupMenu ( this );
     selPopup->insertItem( i18n("Export"),  exportPO );
 #ifdef DESKTOP_VERSION
     mPopupMenu->insertSeparator();
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Print complete list..."),this,
                                   SLOT(printList()),true);
 #endif
     mCalPopup = new QPopupMenu ( this );
     selPopup->insertItem( i18n("Set Calendar"),  mCalPopup );
 
     selPopup->insertItem(i18n("Set categories")+"...",this,
                          SLOT(setCat()) );
     selPopup->insertItem( i18n("Set alarm..."),this,
                           SLOT(setAlarm()));
 #if 0
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Set categories")+"...",this,
                                   SLOT(setCat()),true);
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Set alarm..."),this,
                                   SLOT(setAlarm()),true); 
 #endif
     QObject::connect(mCalPopup,SIGNAL(aboutToShow()),this,
                      SLOT( populateCalPopup() ));
     QObject::connect(mCalPopup,SIGNAL(activated( int )),this,
                      SLOT( setCalendar( int ) ));
     QObject::connect(mPopupMenu,SIGNAL(categoryChanged( Incidence * )),this,
                      SLOT( catChanged( Incidence * ) ));
     exportPO->insertItem( i18n("As iCal (ics) file..."),this,
                                   SLOT(saveToFile()));
     exportPO->insertItem( i18n("As vCal (vcs) file..."),this,
                                   SLOT(saveToFileVCS()));
     exportPO->insertItem( i18n("Journal/Details..."),this,
                                   SLOT(saveDescriptionToFile()));
     // mPopupMenu->insertSeparator();
     // mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
     //                            i18n("Add Categ. to selected..."),this,
     //                            SLOT(addCat()),true);
     //mPopupMenu->insertSeparator();
 #ifndef DESKTOP_VERSION
     selPopup->insertSeparator();
     selPopup->insertItem( i18n("Beam via IR..."),this,
                           SLOT(beamSelected()));
 #if 0
     mPopupMenu->addAdditionalItem(QIconSet(QPixmap()),
                                   i18n("Beam via IR"),this,
                                   SLOT(beamSelected()),true);
 #endif
 #endif
     /*
       mPopupMenu = new QPopupMenu;
       mPopupMenu->insertItem(i18n("Edit Event"), this,
       SLOT (editEvent()));
       mPopupMenu->insertItem(SmallIcon("delete"), i18n("Delete Event"), this,
       SLOT (deleteEvent()));
       mPopupMenu->insertSeparator();
       mPopupMenu->insertItem(i18n("Show Dates"), this,
       SLOT(showDates()));
       mPopupMenu->insertItem(i18n("Hide Dates"), this,
       SLOT(hideDates()));
     */
     QObject::connect(mListView,SIGNAL( newEvent()),
                      this,SIGNAL(signalNewEvent()));
     QObject::connect(mListView,SIGNAL(doubleClicked(QListViewItem *)),
                      this,SLOT(defaultItemAction(QListViewItem *)));
     QObject::connect(mListView,SIGNAL(rightButtonPressed( QListViewItem *,
                                                            const QPoint &, int )),
                      this,SLOT(popupMenu(QListViewItem *,const QPoint &,int)));
     QObject::connect(mListView,SIGNAL(currentChanged(QListViewItem *)),
                      SLOT(processSelectionChange(QListViewItem *)));
     QObject::connect(mListView,SIGNAL(showIncidence(Incidence *)),
                      SIGNAL(showIncidenceSignal(Incidence *)) );
 
     readSettings(KOGlobals::config(),"KOListView Layout");
 }
 
 KOListView::~KOListView()
 {
     delete mPopupMenu;
 #if QT_VERSION >= 0x030000
 
 #else
     delete mKOListViewWhatsThis;
 #endif 
 }
 
 void KOListView::catChanged( Incidence* inc)
 {
     KOListViewItem* item = getItemForEvent(inc);
     if (item) { 
         ListItemVisitor v(item, mStartDate );
         inc->accept(v);
     }
 }
 QString KOListView::getWhatsThisText(QPoint p)
 {
     KOListViewItem* item = ( KOListViewItem* ) mListView->itemAt( p );
     if ( item )
         return KIncidenceFormatter::instance()->getFormattedText( item->data(),
                                                                   KOPrefs::instance()->mWTshowDetails,
                                                                   KOPrefs::instance()->mWTshowCreated,
                                                                   KOPrefs::instance()->mWTshowChanged);
     return i18n("That is the list view" );
 
 }
 
 void KOListView::setCalendar( int c )
 {
     int result = QMessageBox::warning( this, i18n("KO/Pi: Information!"),
                                        i18n("This adds the selected\nitems to the calendar\n%1\nand removes them from\ntheir current calendar!").arg( KOPrefs::instance()->calName( c ) ),
                                        i18n("Continue"), i18n("Cancel"), 0,
                                        0, 1 );
     if ( result != 0 ) {
         return;
     }
     
     QPtrList<Incidence> delSel = getSelectedIncidences() ;
     int icount = delSel.count();
     if ( icount ) {
         Incidence *incidence = delSel.first();
         while ( incidence ) {
             incidence->setCalID( c );
             KOListViewItem * item = getItemForEvent( incidence );
             if ( item ) {
                 ListItemVisitor v(item, mStartDate );
                 incidence->accept(v);
             }
             incidence = delSel.next();
         }
     }
     QPtrList<KopiCalendarFile> calendars = KOPrefs::instance()->mCalendars;
     KopiCalendarFile * cal = calendars.first();
     while ( cal ) {
         mCalendar->setCalendarEnabled( cal->mCalNumber,cal->isEnabled );
         mCalendar->setAlarmEnabled( cal->mCalNumber, cal->isAlarmEnabled );
         mCalendar->setReadOnly( cal->mCalNumber, cal->isReadOnly );
         if ( cal->isStandard )
             mCalendar->setDefaultCalendar( cal->mCalNumber );
         cal = calendars.next();
     }
     mCalendar->setSyncEventsReadOnly();
     mCalendar->reInitAlarmSettings();
 
 }
 void KOListView::populateCalPopup()
 {
     mCalPopup->clear();
     KopiCalendarFile * kkf = KOPrefs::instance()->mCalendars.first();
     while ( kkf ) {
         int index = mCalPopup->insertItem( kkf->mName+"...", kkf->mCalNumber);
         if ( kkf->mErrorOnLoad || kkf->isReadOnly )
         mCalPopup->setItemEnabled( index, false );
         kkf = KOPrefs::instance()->mCalendars.next();
     }
 }
 void KOListView::updateList()
 {
     // qDebug(" KOListView::updateList() ");
 
 }
 
 void KOListView::clearList()
 {
     clear ();
 }
 
 void KOListView::setCat()
 {
 
     bool set = true;
     int result = KMessageBox::warningYesNoCancel(this, 
                                                  i18n("Do you want to <b>add</b> categories to the selected items or <b>reset</b> the list (i.e. remove current categories)?"),
                                                  i18n("Set categories"),
                                                  i18n("Add"),
                                                  i18n("Reset"));
     if (result == KMessageBox::Cancel) return;
     if (result == KMessageBox::Yes) set = false;
     setCategories( set );
 }
 
 void  KOListView::setAlarm()
 {
     KOAlarmPrefs kap( this);
     if ( !kap.exec() )
         return;
     QPtrList<Incidence> delSel = getSelectedIncidences( true, true, false, true ); // no journals, only due todos
     Incidence* inc = delSel.first();
     int count = 0;
     while ( inc ) {
         ++count;
         if (kap.mAlarmButton->isChecked()) {
             if (inc->alarms().count() == 0) 
                 inc->newAlarm();
             Alarm *alarm = inc->alarms().first();
             alarm->setEnabled(true);
             int j = kap.mAlarmTimeEdit->value()* -60;
             if (kap.mAlarmIncrCombo->currentItem() == 1)
                 j = j * 60;
             else if (kap.mAlarmIncrCombo->currentItem() == 2)
                 j = j * (60 * 24);
             alarm->setStartOffset( j );
 
             if (!kap.mAlarmProgram.isEmpty() && kap.mAlarmProgramButton->isOn()) {
                 alarm->setProcedureAlarm(kap.mAlarmProgram);
             }
             else if (!kap.mAlarmSound.isEmpty() && kap.mAlarmSoundButton->isOn())
                 alarm->setAudioAlarm(kap.mAlarmSound);
             else
                 alarm->setType(Alarm::Invalid);
         } else {
             QPtrList<Alarm> alarms = inc->alarms();
             Alarm *alarm;
             for (alarm = alarms.first(); alarm; alarm = alarms.next() ) {
                 alarm->setEnabled(false);
                 alarm->setType(Alarm::Invalid);
             }
         }
         KOListViewItem* item = getItemForEvent(inc);
         if (item) { 
             ListItemVisitor v(item, mStartDate );
             inc->accept(v);
         }
         inc = delSel.next();   
     }
     topLevelWidget()->setCaption( i18n("Changed alarm for %1 items").arg( count )  );
     qDebug("KO: Set alarm for %d items", count);
     calendar()->reInitAlarmSettings();
     QTimer::singleShot( 1, this, SLOT ( resetFocus() ) );
 }
 void KOListView::setCategories( bool removeOld )
 {
    
     KPIM::CategorySelectDialog* csd = new KPIM::CategorySelectDialog( KOPrefs::instance(), 0 );
     csd->setColorEnabled();
diff --git a/korganizer/mainwindow.cpp b/korganizer/mainwindow.cpp
index 77d0ac8..98a820d 100644
--- a/korganizer/mainwindow.cpp
+++ b/korganizer/mainwindow.cpp
@@ -1,484 +1,487 @@
 #include <stdlib.h>
 
 #include <qaction.h>
 #include <qpopupmenu.h>
 #include <qpainter.h>
 #include <qwhatsthis.h>
 #include <qpushbutton.h>
 #include <qmessagebox.h>
 #include <qlineedit.h>
 #include <qtextcodec.h>
 #include <qfile.h>
 #include <qdir.h>
 #include <qapp.h>
 #include <qfileinfo.h>
 #include <qlabel.h>
 #include <qspinbox.h>
 #include <qcheckbox.h>
 #include <qmap.h>
 #include <qwmatrix.h>
 #include <qtextbrowser.h>
 #include <qtextstream.h>
 #ifndef DESKTOP_VERSION
 #include <qpe/global.h>
 #include <qpe/qpetoolbar.h>
 #include <qpe/resource.h>
 #include <qpe/qpeapplication.h>
 #include <qtopia/alarmserver.h>
 #include <qtopia/qcopenvelope_qws.h>
 #include <unistd.h> // for sleep
 #else
 #include <qtoolbar.h>
 #include <qapplication.h>
 //#include <resource.h>
 
 #endif
 #include <libkcal/calendarlocal.h>
 #include <libkcal/todo.h>
 #include <libkcal/phoneformat.h>
 #include <libkdepim/ksyncprofile.h>
 #include <libkdepim/phoneaccess.h>
 #include <libkcal/kincidenceformatter.h>
 #include <libkdepim/kpimglobalprefs.h>
 
 #include "calendarview.h"
 #include "koviewmanager.h"
 #include "datenavigator.h"
 #include "koagendaview.h"
 #include "kojournalview.h"
 #include "koagenda.h"
 #include "kodialogmanager.h"
 #include "kdialogbase.h"
 #include "kapplication.h"
 #include "kofilterview.h"
 #include "kstandarddirs.h"
 #include "koprefs.h"
 #include "kfiledialog.h"
 #include "koglobals.h"
 #include "kglobal.h"
 #include "ktoolbar.h"
 #include "klocale.h"
 #include "kconfig.h"
 #include "externalapphandler.h"
 #include <kglobalsettings.h>
 
 using namespace KCal;
 #ifndef _WIN32_
 #include <unistd.h>
 #else
 #ifdef _OL_IMPORT_
 #include "koimportoldialog.h"
 #endif
 #endif
 #include "mainwindow.h"
 
 
 class KOex2phonePrefs : public QDialog
 {
   public:
     KOex2phonePrefs( QWidget *parent=0, const char *name=0 ) :
       QDialog( parent, name, true ) 
     {
         setCaption( i18n("Export to phone options") );
         QVBoxLayout* lay = new QVBoxLayout( this );
         lay->setSpacing( 3 );
         lay->setMargin( 3 );
         QLabel *lab;
         lay->addWidget(lab = new QLabel( i18n("Please read Help-Sync Howto\nto know what settings to use."), this ) );  
         lab->setAlignment (AlignHCenter  ); 
         QHBox* temphb;
         temphb = new QHBox( this );
         new QLabel( i18n("I/O device: "), temphb ); 
         mPhoneDevice = new QLineEdit( temphb);
         lay->addWidget( temphb );
         temphb = new QHBox( this );
         new QLabel( i18n("Connection: "), temphb ); 
         mPhoneConnection = new QLineEdit( temphb);
         lay->addWidget( temphb );
         temphb = new QHBox( this );
         new QLabel( i18n("Model(opt.): "), temphb ); 
         mPhoneModel = new QLineEdit( temphb);
         lay->addWidget( temphb );
         mWriteBackFuture= new QCheckBox( i18n("Write back events in future only"), this );
         mWriteBackFuture->setChecked( true );
         lay->addWidget( mWriteBackFuture );
         temphb = new QHBox( this );
         new QLabel( i18n("Max. weeks in future: ") , temphb );
         mWriteBackFutureWeeks= new QSpinBox(1,104, 1, temphb);
         mWriteBackFutureWeeks->setValue( 8 );
         lay->addWidget( temphb );  
         lay->addWidget(lab = new QLabel( i18n("NOTE: This will remove all old\ntodo/calendar data on phone!"), this ) );  
         lab->setAlignment (AlignHCenter  ); 
         QPushButton * ok = new QPushButton( i18n("Export to mobile phone!"), this );
         lay->addWidget( ok );
         QPushButton * cancel = new QPushButton( i18n("Cancel"), this );
         lay->addWidget( cancel );
         connect ( ok,SIGNAL(clicked() ),this , SLOT ( accept() )  );
         connect (cancel, SIGNAL(clicked() ), this, SLOT ( reject())  );
         resize( 220, 240 );
         qApp->processEvents();
         int dw = QApplication::desktop()->width();
         int dh = QApplication::desktop()->height();
         move( (dw-width())/2, (dh - height() )/2 );
     }
    
 public:
     QLineEdit* mPhoneConnection, *mPhoneDevice, *mPhoneModel; 
     QCheckBox* mWriteBackFuture;
     QSpinBox* mWriteBackFutureWeeks;
 };
 
 QPixmap* sgListViewCompletedPix[6];
 QPixmap* sgListViewJournalPix;
 
 
 int globalFlagBlockStartup;
 MainWindow::MainWindow( QWidget *parent, const char *name ) :
     QMainWindow( parent, name )
 {
     sgListViewCompletedPix[5] = &listviewPix;
     sgListViewCompletedPix[0] = &listviewPix0;
     sgListViewCompletedPix[1] = &listviewPix20;
     sgListViewCompletedPix[2] = &listviewPix40;
     sgListViewCompletedPix[3] = &listviewPix60;
     sgListViewCompletedPix[4] = &listviewPix80;
         //int size = 12;
     {
         sgListViewCompletedPix[5]->resize( 11, 11 );
         sgListViewCompletedPix[5]->fill( Qt::white );
         QPainter p ( sgListViewCompletedPix[5] );
         p.drawRect( 0,0,11,11);
         p.drawLine ( 2, 5, 4 , 7 ) ;
         p.drawLine ( 4 , 7 ,  8, 3) ;
         int iii = 0;
         for ( iii = 0; iii < 5; ++iii ) {
             sgListViewCompletedPix[iii]->resize( 11, 11 );
             sgListViewCompletedPix[iii]->fill( Qt::white );
             QPainter p ( sgListViewCompletedPix[iii] );
             p.drawRect( 0,0,11,11);
             if ( iii )
                 p.fillRect( 1,1,iii*2,9,Qt::gray );
         }
         sgListViewJournalPix = &journalPix;
         sgListViewJournalPix->resize( 11, 11 );
         sgListViewJournalPix->fill( Qt::white ); 
         {
             QPainter p ( sgListViewJournalPix );
             p.drawRect( 0,0,11,11);
             p.drawLine( 2,3,5,3);
             p.drawLine( 2,5,8,5);
             p.drawLine( 2,7,6,7);
         }
     }
     mClosed = false;
     //QString confFile = KStandardDirs::appDir() + "config/korganizerrc";
     QString confFile = locateLocal("config","korganizerrc");
     QFileInfo finf ( confFile );
     bool showWarning =  !finf.exists();
     setIcon(SmallIcon( "ko24" )  );
     mBlockAtStartup = true;
     mFlagKeyPressed = false;
     setCaption("KO/Pi");
     KOPrefs *p = KOPrefs::instance();
     //KPimGlobalPrefs::instance()->setGlobalConfig();
     p->mCurrentDisplayedView = 0;
     if ( p->mHourSize >  22 )
         p->mHourSize = 22;
     QMainWindow::ToolBarDock tbd;
     if ( p->mToolBarHor ) {
         if ( p->mToolBarUp )
             tbd = Bottom;
         else
             tbd = Top;
     }
     else {
         if ( p->mToolBarUp )
             tbd = Right;
         else
             tbd = Left;
     }
     if ( KOPrefs::instance()->mUseAppColors )
         QApplication::setPalette( QPalette (KOPrefs::instance()->mAppColor1, KOPrefs::instance()->mAppColor2), true );
     globalFlagBlockStartup = 1;
     iconToolBar = new QPEToolBar( this );
     addToolBar (iconToolBar , tbd );
 
 #ifdef DESKTOP_VERSION
     if ( KOPrefs::instance()->mShowIconFilter ) 
 #else
     if ( KOPrefs::instance()->mShowIconFilter || !p->mShowIconOnetoolbar ) 
 #endif
 
 {
         if ( p->mToolBarHorF ) {
             if ( p->mToolBarUpF )
                 tbd = Bottom;
             else
                 tbd = Top;
         }
         else {
             if ( p->mToolBarUpF )
             tbd = Right;
             else
                 tbd = Left;
         }
         filterToolBar = new QPEToolBar ( this );
         filterMenubar = new KMenuBar( 0 );
         QFontMetrics fm ( filterMenubar->font() );
-            
+#ifndef DESKTOP_VERSION    
+        filterToolBar->setFocusPolicy( NoFocus );
+        filterMenubar->setFocusPolicy( NoFocus );
+#endif     
         filterPopupMenu = new QPopupMenu( this );
         filterMenubar->insertItem( i18n("No Filter"), filterPopupMenu,0  );
         QString addTest = "A";  
         filterMenubar->setMinimumWidth( fm.width( i18n("No Filter")+addTest ) );
 #ifdef DESKTOP_VERSION
         addTest = "AAABBBCCCx"; 
 #else
         addTest = "AAx";  
 #endif 
         filterMenubar->setMaximumWidth( fm.width( i18n("No Filter")+addTest ) );
         addToolBar (filterToolBar , tbd );
         connect ( filterPopupMenu , SIGNAL( activated ( int )  ), this, SLOT (selectFilterPopup( int ) ) );
         connect ( filterPopupMenu , SIGNAL( aboutToShow() ), this, SLOT (fillFilterMenuPopup() ) );
         if ( !KOPrefs::instance()->mShowIconFilter && !p->mShowIconOnetoolbar )
             filterToolBar->hide();
     } else {
         filterToolBar = 0;
         filterMenubar  = 0;
         filterPopupMenu = 0;
     }
     if ( p->mShowIconOnetoolbar ) {
         viewToolBar = iconToolBar ;
         navigatorToolBar = iconToolBar ;
     } else {
 #ifndef DESKTOP_VERSION
         setToolBarsMovable( false );
 #endif
         if ( p->mToolBarHorV ) {
             if ( p->mToolBarUpV )
                 tbd = Bottom;
             else
                 tbd = Top;
         }
         else {
             if ( p->mToolBarUpV )
                 tbd = Right;
             else
                 tbd = Left;
         }
         viewToolBar = new QPEToolBar( this );
         addToolBar (viewToolBar , tbd );
         if ( p->mToolBarHorN ) {
             if ( p->mToolBarUpN )
                 tbd = Bottom;
             else
                 tbd = Top;
         }
         else {
             if ( p->mToolBarUpN )
                 tbd = Right;
             else
                 tbd = Left;
         }
         navigatorToolBar = new QPEToolBar( this );
         addToolBar (navigatorToolBar , tbd );
     }
 
   
 
     mCalendarModifiedFlag = false;
     QLabel* splash  = new QLabel(i18n("KO/Pi is starting ... "), this );
     splash->setAlignment ( AlignCenter );
     setCentralWidget( splash );
 #ifndef DESKTOP_VERSION
     showMaximized();
 #endif
 
     //qDebug("Mainwidget x %d y %d w %d  h %d",  x(), y(), width(), height ());
     setDefaultPreferences();
     mCalendar = new CalendarLocal();
     mView = new CalendarView( mCalendar, this,"mCalendar " );
     mView->hide();
     //mView->resize(splash->size() );
     initActions(); 
     mSyncManager = new KSyncManager((QWidget*)this, (KSyncInterface*)mView, KSyncManager::KOPI, KOPrefs::instance(), syncMenu);
     mSyncManager->setBlockSave(false);
     mView->setSyncManager(mSyncManager);
 #ifndef DESKTOP_VERSION
     iconToolBar->show();
     qApp->processEvents();
 #endif
     //qDebug("Splashwidget x %d y %d w %d  h %d", splash-> x(), splash->y(), splash->width(),splash-> height ());
     int vh = height() ;
     int vw = width();
     //qDebug("Toolbar hei %d ",iconToolBar->height() );
     if ( iconToolBar->orientation () == Qt:: Horizontal ) {
         vh -=  iconToolBar->height();
     } else {
         vw -= iconToolBar->height();
     }
     //mView->setMaximumSize( splash->size() );
     //mView->resize( splash->size() );
     //qDebug("MainView x %d y %d w %d  h %d",  mView->x(),mView-> y(), mView->width(), mView->height ());
     mView->readSettings();
     bool newFile = false;
     if( !QFile::exists( defaultFileName() ) ) {
         QFileInfo finfo ( defaultFileName() );
         QString oldFile = QDir::convertSeparators(  QDir::homeDirPath()+"/Applications/korganizer/mycalendar.ics");
         QString message = "You are starting KO/Pi for the\nfirst time after updating to a\nversion >= 1.9.1. The location of the\ndefault calendar file has changed.\nA mycalendar.ics file was detected\nat the old location.\nThis file will be loaded now\nand stored at the new location!\n(Config file location has changed, too!)\nPlease read menu Help-What's New!\n";
         finfo.setFile( oldFile );
         if (finfo.exists() ) {
             KMessageBox::information( this, message);
             mView->openCalendar( oldFile );
             qApp->processEvents();
         } else {
             oldFile = QDir::convertSeparators(  QDir::homeDirPath()+"/korganizer/mycalendar.ics");
             finfo.setFile( oldFile );
             if (finfo.exists() ) {
                 KMessageBox::information( this, message);
                 mView->openCalendar( oldFile );
                 qApp->processEvents();
             }
         }
         mView->saveCalendar( defaultFileName() );
         newFile = true;
     }
 
     QTime neededSaveTime = QDateTime::currentDateTime().time();
     mView->loadCalendars();
     int msNeeded = neededSaveTime.msecsTo( QDateTime::currentDateTime().time() );
     qDebug("KO: Calendar loading time: %d ms",msNeeded );
 
     if ( KPimGlobalPrefs::instance()->mPreferredLanguage != KOPrefs::instance()->mOldLoadedLanguage ) {
         KOPrefs::instance()->setAllDefaults();
     }
     processIncidenceSelection( 0 );
     connect( mView, SIGNAL( incidenceSelected( Incidence * ) ),
              SLOT( processIncidenceSelection( Incidence * ) ) );
     connect( mView, SIGNAL( modifiedChanged( bool ) ),
              SLOT( slotModifiedChanged( bool ) ) );
 
 
     connect( mView, SIGNAL( tempDisableBR(bool) ),
              SLOT( disableBR(bool) ) );
     connect( &mSaveTimer, SIGNAL( timeout() ), SLOT( save() ) );
     mView->setModified( false );
     mBlockAtStartup = false;
     mView->setModified( false );
     setCentralWidget( mView );
     globalFlagBlockStartup = 0;
     mView->show();
     delete splash;
     if ( newFile )
         mView->updateConfig();
     // qApp->processEvents();
     //qDebug("MainView x %d y %d w %d  h %d",  mView->x(),mView-> y(), mView->width(), mView->height ());
     //fillSyncMenu();
    
     
     connect(mSyncManager , SIGNAL( save() ), this, SLOT( save() ) );
     connect(mView , SIGNAL( save() ), this, SLOT( save() ) );
     connect(mView , SIGNAL( saveStopTimer() ), this, SLOT( saveStopTimer() ) );
     connect(mSyncManager , SIGNAL( request_file() ), this, SLOT( syncFileRequest() ) );
     connect(mSyncManager , SIGNAL( getFile( bool )), this, SLOT(getFile( bool ) ) );
     mSyncManager->setDefaultFileName( sentSyncFile()); 
     connect ( syncMenu, SIGNAL( activated ( int )  ), mSyncManager, SLOT (slotSyncMenu( int ) ) );
     mSyncManager->fillSyncMenu();
 
 
 
     mView->viewManager()->agendaView()->setStartHour( KOPrefs::instance()->mDayBegins  );
     if ( showWarning ) {
         KMessageBox::information( this,
                          "You are starting KO/Pi for the first time.\nPlease read menu: Help-What's New,\nif you did an update!\nPlease choose your timezone in the \nConfigure Dialog TAB Time Zone!\nPlease choose your language\nin the TAB Locale!\nYou get the Configure Dialog\nvia Menu: Actions - Configure....\nClick OK to show the Configure Dialog!\n", "KO/Pi information");
         qApp->processEvents();
         mView->dialogManager()->showSyncOptions();
     }
 
   //US listen for result adressed from Ka/Pi
 #ifndef DESKTOP_VERSION
   connect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), ExternalAppHandler::instance(), SLOT (appMessage ( const QCString &, const QByteArray & )));
 #endif
 #ifndef DESKTOP_VERSION
     infrared = 0;
 #endif
     updateFilterToolbar();
     updateWeek( mView->startDate() );
     connect( mView->dateNavigator(), SIGNAL( datesSelected( const KCal::DateList & ) ),
              SLOT( updateWeekNum( const KCal::DateList & ) ) );
     mBRdisabled = false;
     //toggleBeamReceive();
 
     QTimer::singleShot( 1000, mView, SLOT ( checkFiles() ));
 }
 MainWindow::~MainWindow()
 {
     //qDebug("MainWindow::~MainWindow() ");
     //save toolbar location
     delete mCalendar;
     delete mSyncManager;
 #ifndef DESKTOP_VERSION
     if ( infrared )
         delete infrared;
 #endif
 
 
 }
 void MainWindow::slotResetFocus()
 {
     //qDebug(" CalendarView::slotResetFocus() %x  %x %x %x", qApp->focusWidget(), menuBar1, mView,iconToolBar);
     mFocusLoop = 3;
     QTimer::singleShot( 0, this, SLOT(slotResetFocusLoop()  ));
 }
 void MainWindow::slotResetFocusLoop()
 {
     --mFocusLoop;
     QWidget* fw = mView->viewManager()->currentView();
     if ( fw ) {
         //qDebug("loop ");
         fw->setFocus();
         if ( qApp->focusWidget() != fw && mFocusLoop > 0 )
             QTimer::singleShot( 0, this, SLOT(slotResetFocusLoop()  ));
     }
         
 }
 void MainWindow::disableBR(bool b)
 {
 #ifndef DESKTOP_VERSION
     if ( b ) {
         if ( infrared ) {
             toggleBeamReceive();
             mBRdisabled = true;
         }
         mBRdisabled = true;
     } else {
         if ( mBRdisabled ) {
             mBRdisabled = false;
             //makes no sense,because other cal ap is probably running
             // toggleBeamReceive(); 
         }
     }
 #endif
 
 }
 bool MainWindow::beamReceiveEnabled()
 {
 #ifndef DESKTOP_VERSION
     return ( infrared != 0 );
 #endif
     return false;
 }
 
 void MainWindow::toggleBeamReceive()
 {
     if ( mBRdisabled  )
         return;
 #ifndef DESKTOP_VERSION
     if ( infrared ) {
         qDebug("KO: Disable BeamReceive ");
         delete infrared;
         infrared = 0;
         brAction->setOn(false);
         return;
     } 
     qDebug("KO: Enable BeamReceive ");
     brAction->setOn(true);
diff --git a/libkcal/alarm.cpp b/libkcal/alarm.cpp
index 79e0464..3157214 100644
--- a/libkcal/alarm.cpp
+++ b/libkcal/alarm.cpp
@@ -97,387 +97,387 @@ bool Alarm::operator==( const Alarm& rhs ) const
       return false;
   } else {
     if (mOffset != rhs.mOffset ||
         mEndOffset != rhs.mEndOffset)
       return false;
   }
   switch (mType) {
     case Display:
       return mDescription == rhs.mDescription;
 
     case Email:
       return mDescription == rhs.mDescription &&
              mMailAttachFiles == rhs.mMailAttachFiles &&
              mMailAddresses == rhs.mMailAddresses &&
              mMailSubject == rhs.mMailSubject;
 
     case Procedure:
       return mFile == rhs.mFile &&
              mDescription == rhs.mDescription;
 
     case Audio:
       return mFile == rhs.mFile;
 
     case Invalid:
       break;
   }
   return false;
 }
 
 void Alarm::setType(Alarm::Type type)
 {
   if (type == mType)
     return;
 
   switch (type) {
     case Display:
       mDescription = "";
       break;
     case Procedure:
       mFile = mDescription = "";
       break;
     case Audio:
       mFile = "";
       break;
     case Email:
       mMailSubject = mDescription = "";
       mMailAddresses.clear();
       mMailAttachFiles.clear();
       break;
     case Invalid:
       break;
     default:
       return;
   }
   mType = type;
   mParent->updated();
 }
 
 Alarm::Type Alarm::type() const
 {
   return mType;
 }
 
 void Alarm::setAudioAlarm(const QString &audioFile)
 {
   mType = Audio;
   mFile = audioFile;
   mParent->updated();
 }
 
 void Alarm::setAudioFile(const QString &audioFile)
 {
   if (mType == Audio) {
     mFile = audioFile;
     mParent->updated();
   }
 }
 
 QString Alarm::audioFile() const
 {
   return (mType == Audio) ? mFile : QString::null;
 }
 
 void Alarm::setProcedureAlarm(const QString &programFile, const QString &arguments)
 {
   mType = Procedure;
   mFile = programFile;
   mDescription = arguments;
   mParent->updated();
 }
 
 void Alarm::setProgramFile(const QString &programFile)
 {
   if (mType == Procedure) {
     mFile = programFile;
     mParent->updated();
   }
 }
 
 QString Alarm::programFile() const
 {
   return (mType == Procedure) ? mFile : QString::null;
 }
 
 void Alarm::setProgramArguments(const QString &arguments)
 {
   if (mType == Procedure) {
     mDescription = arguments;
     mParent->updated();
   }
 }
 
 QString Alarm::programArguments() const
 {
   return (mType == Procedure) ? mDescription : QString::null;
 }
 
 void Alarm::setEmailAlarm(const QString &subject, const QString &text,
                           const QValueList<Person> &addressees, const QStringList &attachments)
 {
   mType = Email;
   mMailSubject = subject;
   mDescription = text;
   mMailAddresses = addressees;
   mMailAttachFiles = attachments;
   mParent->updated();
 }
 
 void Alarm::setMailAddress(const Person &mailAddress)
 {
   if (mType == Email) {
     mMailAddresses.clear();
     mMailAddresses += mailAddress;
     mParent->updated();
   }
 }
 
 void Alarm::setMailAddresses(const QValueList<Person> &mailAddresses)
 {
   if (mType == Email) {
     mMailAddresses = mailAddresses;
     mParent->updated();
   }
 }
 
 void Alarm::addMailAddress(const Person &mailAddress)
 {
   if (mType == Email) {
     mMailAddresses += mailAddress;
     mParent->updated();
   }
 }
 
 QValueList<Person> Alarm::mailAddresses() const
 {
   return (mType == Email) ? mMailAddresses : QValueList<Person>();
 }
 
 void Alarm::setMailSubject(const QString &mailAlarmSubject)
 {
   if (mType == Email) {
     mMailSubject = mailAlarmSubject;
     mParent->updated();
   }
 }
 
 QString Alarm::mailSubject() const
 {
   return (mType == Email) ? mMailSubject : QString::null;
 }
 
 void Alarm::setMailAttachment(const QString &mailAttachFile)
 {
   if (mType == Email) {
     mMailAttachFiles.clear();
     mMailAttachFiles += mailAttachFile;
     mParent->updated();
   }
 }
 
 void Alarm::setMailAttachments(const QStringList &mailAttachFiles)
 {
   if (mType == Email) {
     mMailAttachFiles = mailAttachFiles;
     mParent->updated();
   }
 }
 
 void Alarm::addMailAttachment(const QString &mailAttachFile)
 {
   if (mType == Email) {
     mMailAttachFiles += mailAttachFile;
     mParent->updated();
   }
 }
 
 QStringList Alarm::mailAttachments() const
 {
   return (mType == Email) ? mMailAttachFiles : QStringList();
 }
 
 void Alarm::setMailText(const QString &text)
 {
   if (mType == Email) {
     mDescription = text;
     mParent->updated();
   }
 }
 
 QString Alarm::mailText() const
 {
   return (mType == Email) ? mDescription : QString::null;
 }
 
 void Alarm::setDisplayAlarm(const QString &text)
 {
   mType = Display;
   mDescription = text;
   mParent->updated();
 }
 
 void Alarm::setText(const QString &text)
 {
   if (mType == Display) {
     mDescription = text;
     mParent->updated();
   }
 }
 
 QString Alarm::text() const
 {
   return (mType == Display) ? mDescription : QString::null;
 }
 
 void Alarm::setTime(const QDateTime &alarmTime)
 {
   mAlarmTime = alarmTime;
   mHasTime = true;
 
   mParent->updated();
 }
 int Alarm::offset() 
 {
     if ( hasTime() ) {
         if (mParent->typeID() == todoID ) {
             Todo *t = static_cast<Todo*>(mParent);
             return  t->dtDue().secsTo( mAlarmTime ) ;
         } else
             return mParent->dtStart().secsTo( mAlarmTime ) ;
     }
     else
         {
             return mOffset.asSeconds();
         }
     
 }
-QString Alarm::offsetText() 
+QString Alarm::offsetText()
 {
     int min = -offset()/60;
     int hours = min /60;
     min = min % 60;
     int days = hours /24;
     hours = hours % 24;
     QString message;
     //qDebug("%d %d %d ", days, hours, min  );
     if ( days > 0 )
         message += i18n("%1d").arg( days );
     if ( hours > 0 ) {
         if ( !message.isEmpty() ) message += "/";
         message += i18n("%1h").arg( hours );
     }
     if ( min > 0 ) {
         if ( !message.isEmpty() ) message += "/";
         message += i18n("%1min").arg( min );
     }
     if ( message.isEmpty() )
          message = i18n("%1min").arg( 0 );
     if ( !mParent->alarmEnabled() )
         return "!"+message + i18n("(disabled)");
     return message; 
 }
 
 
 QDateTime Alarm::time() const
 {
   if ( hasTime() )
     return mAlarmTime;
   else
   {
     if (mParent->typeID() == todoID ) {
       Todo *t = static_cast<Todo*>(mParent);
       return mOffset.end( t->dtDue() );
     } else if (mEndOffset) {
       return mOffset.end( mParent->dtEnd() );
     } else {
       return mOffset.end( mParent->dtStart() );
     }
   }
 }
 
 bool Alarm::hasTime() const
 {
   return mHasTime;
 }
 
 void Alarm::setSnoozeTime(int alarmSnoozeTime)
 {
   mAlarmSnoozeTime = alarmSnoozeTime;
   mParent->updated();
 }
 
 int Alarm::snoozeTime() const
 {
   return mAlarmSnoozeTime;
 }
 
 void Alarm::setRepeatCount(int alarmRepeatCount)
 {
   kdDebug(5800) << "Alarm::setRepeatCount(): " << alarmRepeatCount << endl;
 
   mAlarmRepeatCount = alarmRepeatCount;
   mParent->updated();
 }
 
 int Alarm::repeatCount() const
 {
   kdDebug(5800) << "Alarm::repeatCount(): " << mAlarmRepeatCount << endl;
   return mAlarmRepeatCount;
 }
 
 void Alarm::toggleAlarm()
 {
   mAlarmEnabled = !mAlarmEnabled;
   mParent->updated();
 }
 
 void Alarm::setEnabled(bool enable)
 {
   mAlarmEnabled = enable;
   mParent->updated();
 }
 
 bool Alarm::enabled() const
 {
   return mAlarmEnabled;
 }
 
 void Alarm::setStartOffset( const Duration &offset )
 {
   mOffset = offset;
   mEndOffset = false;
   mHasTime = false;
   mParent->updated();
 }
 
 Duration Alarm::startOffset() const
 {
   return (mHasTime || mEndOffset) ? 0 : mOffset;
 }
 
 bool Alarm::hasStartOffset() const
 {
   return !mHasTime && !mEndOffset;
 }
 
 bool Alarm::hasEndOffset() const
 {
   return !mHasTime && mEndOffset;
 }
 
 void Alarm::setEndOffset( const Duration &offset )
 {
   mOffset = offset;
   mEndOffset = true;
   mHasTime = false;
   mParent->updated();
 }
 
 Duration Alarm::endOffset() const
 {
   return (mHasTime || !mEndOffset) ? 0 : mOffset;
 }
 
 void Alarm::setParent( Incidence *parent )
 {
   mParent = parent;
 }
diff --git a/libkcal/event.cpp b/libkcal/event.cpp
index 0766fd9..fdf5657 100644
--- a/libkcal/event.cpp
+++ b/libkcal/event.cpp
@@ -161,256 +161,264 @@ void Event::setTransparency(Event::Transparency transparency)
   updated();
 }
 
 Event::Transparency Event::transparency() const
 {
   return mTransparency;
 }
 
 void Event::setDuration(int seconds)
 {
   setHasEndDate(false);
   Incidence::setDuration(seconds);
 }
 bool Event::matchTime(QDateTime*startDT, QDateTime* endDT)
 {
     if ( cancelled() ) return false;
     if ( ! doesRecur() ) {
         if ( doesFloat() ) {
             if ( mDtEnd.addDays( 1 ) < *startDT)
                 return false;
             if ( endDT && mDtStart > * endDT)
                 return false;
         } else {
             if ( mDtEnd < *startDT )
                 return false;
             if ( endDT && mDtStart > * endDT)
                 return false;
         }
     } else {
         if ( endDT && mDtStart > * endDT)
             return false;
     }
     return true;
 }
 bool Event::isOverlapping (  Event* testEvent,  QDateTime* overlapDT, QDateTime* startDT )
 {
     if ( testEvent == this )
         return false;
     if ( ! doesRecur() && !testEvent->doesRecur() ) {
         QDateTime te;
         if ( testEvent->doesFloat() )
             te = testEvent->mDtEnd.addDays( 1 );
         else
             te = testEvent->mDtEnd;
         QDateTime e; 
         if ( doesFloat() )
             e = mDtEnd.addDays( 1 );
         else
             e = mDtEnd;
         if ( mDtStart < te && testEvent->mDtStart < e ) {
             if ( mDtStart < testEvent->mDtStart )
                 *overlapDT =  testEvent->mDtStart;
             else
                 *overlapDT =  mDtStart;
             if ( startDT )
                 return (*overlapDT >= *startDT );
             return true;
         }
         return false;
     }
     if ( !doesFloat() && !testEvent->doesFloat() && !isMultiDay() && !testEvent->isMultiDay() ) {
         if ( mDtStart.time() >=  testEvent->mDtEnd.time() || testEvent->mDtStart.time() >=  mDtEnd.time() ) {
             // no need to test. times mismatch
             //fprintf(stderr,"timi ");
             return false;
         }
     }
     Event *nonRecur = 0;
     Event *recurEvent = 0;
     if ( ! doesRecur() ) {
         nonRecur = this;
         recurEvent = testEvent;
     }
     else if ( !testEvent->doesRecur() ) {
         nonRecur = testEvent;
         recurEvent = this;
     }
     if ( nonRecur ) {
         QDateTime enr; 
         if ( nonRecur->doesFloat() )
             enr = nonRecur->mDtEnd.addDays( 1 );
         else
             enr = nonRecur->mDtEnd;
         if ( enr < recurEvent->mDtStart )
             return false;
         if ( startDT && enr < *startDT )
             return false;
         
         int recDuration = recurEvent->mDtStart.secsTo( recurEvent->mDtEnd );
         if ( recurEvent->doesFloat() )
             recDuration += 86400;
         bool ok = false;
         QDateTime recStart;
         if ( startDT ) {
             recStart = recurEvent->recurrence()->getPreviousDateTime( startDT->addSecs( 61 ), &ok );
         }
         if ( recStart.isValid() ) {
             //qDebug("%s start at %s ", startDT->  toString().latin1(),       recStart.toString().latin1());
             recStart =  recStart.addSecs( -300);
         }
         else
             recStart = recurEvent->mDtStart.addSecs( -300);
         ok = true;
 
         while ( ok ) {
             recStart = recurEvent->getNextOccurence( recStart.addSecs( 60 ), &ok );
             if ( ok ) {
                 if ( recStart > enr )
                     return false;
                 QDateTime recEnd = recStart.addSecs( recDuration  );
                 if ( nonRecur->mDtStart < recEnd && recStart < nonRecur->mDtEnd ) {
                     if ( nonRecur->mDtStart < recStart )
                         *overlapDT =  recStart;
                     else
                         *overlapDT =  nonRecur->mDtStart;
                     if ( startDT  ) {
                         if ( *overlapDT >= *startDT )
                             return true;
                     } else
                         return true;
                 }
             }
         }
         return false;
     }
      if ( !doesFloat() && !testEvent->doesFloat() && !isMultiDay() && !testEvent->isMultiDay() ) {
          if ( recurrence()->doesRecur() == Recurrence::rWeekly &&  testEvent->recurrence()->doesRecur() == Recurrence::rWeekly ) {
              bool found = false;
              uint i;
              for ( i=0; i< recurrence()->days().size();++i ) {
                  found =  found || (recurrence()->days().testBit( i ) && testEvent->recurrence()->days().testBit( i ) );
              }
              if ( ! found ) {
                  //qDebug("recurring days mismatch %s -- %s", summary().latin1(),testEvent->summary().latin1());
                  return false;
              }
 
          }
     }
     bool ok = true;
     QDateTime incidenceStart;// = mDtStart;
     QDateTime testincidenceStart;// = testEvent->mDtStart;
     if ( startDT ) {
         incidenceStart = recurrence()->getPreviousDateTime( startDT->addSecs( 61 ), &ok );
         testincidenceStart = testEvent->recurrence()->getPreviousDateTime( startDT->addSecs( 61 ), &ok );
     }
     if ( !testincidenceStart.isValid() )
         testincidenceStart = testEvent->mDtStart;
     if ( !incidenceStart.isValid() )
         incidenceStart = mDtStart;
     int duration = mDtStart.secsTo( mDtEnd );
     if ( doesFloat() )
             duration += 86400;
     int testduration = testEvent->mDtStart.secsTo( testEvent->mDtEnd );
     if ( testEvent->doesFloat() )
             testduration += 86400;
     bool computeThis = false;
     if ( incidenceStart < testincidenceStart )
         computeThis = true;
     if ( computeThis )
         incidenceStart = incidenceStart.addSecs( -300 );
     else
         testincidenceStart = testincidenceStart.addSecs( -300 );
     int count = 0;
     ok = true;
     int countbreak = 2000;
     QDateTime stopSearch;
     bool testStop = false;
     if ( startDT ) {
         stopSearch = startDT->addDays( 365*3 );
         testStop = true;
     }
     while ( ok ) {
         ++count;
         if ( count > countbreak ) break;
         if ( computeThis ) {
             if ( testStop ) 
                 if ( testincidenceStart > stopSearch )
                     break;
             incidenceStart = getNextOccurence( incidenceStart.addSecs( 60 ), &ok );
         }
         else {
             if ( testStop ) 
                 if ( incidenceStart > stopSearch )
                     break;
             testincidenceStart = testEvent->getNextOccurence( testincidenceStart.addSecs( 60 ), &ok );
         }
         if ( ok ) {
             if ( incidenceStart < testincidenceStart.addSecs( testduration ) && testincidenceStart < incidenceStart.addSecs( duration ) ) {
                 if ( incidenceStart < testincidenceStart )
                     *overlapDT =  testincidenceStart;
                 else
                     *overlapDT =  incidenceStart; 
                 if (  startDT ) {
                     if ( *overlapDT >= *startDT )
                         return true;
                 } else
                     return true;
             }
             computeThis =  ( incidenceStart < testincidenceStart );
         }
         
     }
     //qDebug("%d rec counter stopped at %d - %s %s", ok ,count, summary().latin1(),testEvent->summary().latin1() );
     return false;
 }
 QDateTime Event::getNextAlarmDateTime( bool * ok, int * offset, QDateTime start_dt ) const
 {
     *ok = false;
     if ( !alarmEnabled() )
         return QDateTime ();
     bool yes;
      QDateTime incidenceStart = getNextOccurence( start_dt, &yes );
      if ( ! yes || cancelled() ) {
          *ok = false;
          return QDateTime ();
      }
   
      bool enabled = false;
      Alarm* alarm;
      int off = 0;
      QDateTime alarmStart = QDateTime::currentDateTime().addDays( 3650 );;
     //  if ( QDateTime::currentDateTime() > incidenceStart ){
 //          *ok = false;
 //          return incidenceStart;
 //      }
      for (QPtrListIterator<Alarm> it(mAlarms); (alarm = it.current()) != 0; ++it) {
          if (alarm->enabled()) {
              if ( alarm->hasTime () ) {
                  if ( alarm->time() < alarmStart ) {
                      alarmStart = alarm->time();
                      enabled = true;
                      off = alarmStart.secsTo( incidenceStart );
                  }
 
              } else {
                  int secs = alarm->startOffset().asSeconds();
                  if ( incidenceStart.addSecs( secs ) < alarmStart ) {
                      alarmStart = incidenceStart.addSecs( secs );
                      enabled = true;
                      off = -secs;
                  }
              }
          }
      }
      if ( enabled ) {
          if ( alarmStart >  start_dt  ) {
              *ok = true;
              * offset = off;
              return alarmStart;
          }
      }
      *ok = false;
      return QDateTime ();
 
 }
+
+QString Event::durationText()
+{
+    int sec = mDtStart.secsTo( mDtEnd );
+    if ( doesFloat() )
+        sec += 86400;
+    return durationText4Time( sec );
+}
diff --git a/libkcal/event.h b/libkcal/event.h
index 2da9770..6a58618 100644
--- a/libkcal/event.h
+++ b/libkcal/event.h
@@ -1,94 +1,95 @@
 /*
     This file is part of libkcal.
     Copyright (c) 2001 Cornelius Schumacher <schumacher@kde.org>
 
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
     version 2 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 
 #ifndef EVENT_H
 #define EVENT_H
 //
 // Event component, representing a VEVENT object
 //
 
 #include "incidence.h"
 namespace KCal {
 
 /**
   This class provides an Event in the sense of RFC2445.
 */
 class Event : public Incidence
 {
   public:
     enum Transparency { Opaque, Transparent };
     typedef ListBase<Event> List;
     Event();
     Event(const Event &);
     ~Event();
     bool matchTime(QDateTime*startDT, QDateTime* endDT);
 
     QCString type() const { return "Event"; }
     IncTypeID typeID() const { return eventID; }
 
     Incidence *clone();
     QDateTime getNextAlarmDateTime( bool * ok, int * offset ,QDateTime start_dt  ) const;
 
     /** for setting an event's ending date/time with a QDateTime. */
     void setDtEnd(const QDateTime &dtEnd);
     /** Return the event's ending date/time as a QDateTime. */
     virtual QDateTime dtEnd() const;
     /** returns an event's end time as a string formatted according to the
      users locale settings */
     QString dtEndTimeStr() const;
     /** returns an event's end date as a string formatted according to the
      users locale settings */
     QString dtEndDateStr(bool shortfmt=true) const;
     /** returns an event's end date and time as a string formatted according
      to the users locale settings */
     QString dtEndStr(bool shortfmt=true) const;
     void setHasEndDate(bool);
     /** Return whether the event has an end date/time. */
     bool hasEndDate() const;
 
     /** Return true if the event spans multiple days, otherwise return false. */
     bool isMultiDay() const;
 
     /** set the event's time transparency level. */
     void setTransparency(Transparency transparency);
     /** get the event's time transparency level. */
     Transparency transparency() const;
 
     void setDuration(int seconds);
 
     bool contains ( Event*);
 
     bool isOverlapping (  Event*,  QDateTime*, QDateTime* );
+    QString durationText();
 
   private:
     bool accept(Visitor &v) { return v.visit(this); }
 
     QDateTime mDtEnd;
     bool mHasEndDate;
     Transparency mTransparency;
 };
 
 bool operator==( const Event&, const Event& );
 
 
 }
 
 
 #endif
diff --git a/libkcal/incidence.cpp b/libkcal/incidence.cpp
index 4643a3a..201f593 100644
--- a/libkcal/incidence.cpp
+++ b/libkcal/incidence.cpp
@@ -1,359 +1,388 @@
 /*
     This file is part of libkcal.
     Copyright (c) 2001 Cornelius Schumacher <schumacher@kde.org>
 
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
     version 2 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 
 #include <kglobal.h>
 #include <klocale.h>
 #include <kdebug.h>
 
 #include "calformat.h"
 
 #include "incidence.h"
 #include "todo.h"
 
 using namespace KCal;
 
 Incidence::Incidence() :
   IncidenceBase(),
   mRelatedTo(0), mSecrecy(SecrecyPublic), mPriority(3)
 {
     mRecurrence = 0;//new Recurrence(this);
   mCancelled = false;
   recreate();
   mHasStartDate = true;
   mAlarms.setAutoDelete(true);
   mAttachments.setAutoDelete(true);
   mHasRecurrenceID = false;
   mHoliday = false;
   mBirthday = false;
   mAnniversary = false;
 
 }
 
 Incidence::Incidence( const Incidence &i ) : IncidenceBase( i )
 {
 // TODO: reenable attributes currently commented out.
   mRevision = i.mRevision;
   mCreated = i.mCreated;
   mDescription = i.mDescription;
   mSummary = i.mSummary;
   mCategories = i.mCategories;
 //  Incidence *mRelatedTo;          Incidence *mRelatedTo;
   mRelatedTo = 0;
   mRelatedToUid = i.mRelatedToUid;
 //  QPtrList<Incidence> mRelations;    QPtrList<Incidence> mRelations;
   mExDates = i.mExDates;
   mAttachments = i.mAttachments;
   mResources = i.mResources;
   mSecrecy = i.mSecrecy;
   mPriority = i.mPriority;
   mLocation = i.mLocation;
   mCancelled = i.mCancelled;
   mHasStartDate = i.mHasStartDate;
   QPtrListIterator<Alarm> it( i.mAlarms );
   const Alarm *a;
   while( (a = it.current()) ) {
     Alarm *b = new Alarm( *a );
     b->setParent( this );
     mAlarms.append( b );
 
     ++it;
   }
   mAlarms.setAutoDelete(true);
   mHasRecurrenceID = i.mHasRecurrenceID;
   mRecurrenceID = i.mRecurrenceID;
   if ( i.mRecurrence )
       mRecurrence = new Recurrence( *(i.mRecurrence), this );
   else
       mRecurrence = 0;
   mHoliday = i.mHoliday ;
   mBirthday = i.mBirthday;
   mAnniversary = i.mAnniversary;
 }
 
 Incidence::~Incidence()
 {
    
   Incidence *ev;
    QPtrList<Incidence> Relations = relations();
   for (ev=Relations.first();ev;ev=Relations.next()) {
     if (ev->relatedTo() == this) ev->setRelatedTo(0);
   } 
   if (relatedTo()) relatedTo()->removeRelation(this);
   if ( mRecurrence ) 
       delete mRecurrence; 
  
 }
+QString Incidence::durationText()
+{
+    return "---";
+}
+QString Incidence::durationText4Time( int offset )
+{
+    int min = offset/60;
+    int hours = min /60;
+    min = min % 60;
+    int days = hours /24;
+    hours = hours % 24;
+
+    if ( doesFloat() || ( min == 0 && hours == 0 )  ) {
+        if ( days == 1 )
+            return "1" + i18n(" day");
+        else
+            return QString::number( days )+   i18n(" days");
 
+    }
+    QString message = QString::number ( hours ) +":";
+    if ( min < 10 ) message += "0";
+    message += QString::number ( min );
+    if ( days > 0 ) { 
+        if ( days == 1 )
+            message =  "1" + i18n(" day") + " "+message;
+        else
+            message =  QString::number( days )+   i18n(" days") + " "+message;
+    }
+    return message; 
+}
 bool Incidence::isHoliday() const
 {
     return mHoliday;
 }
 bool Incidence::isBirthday() const
 {
 
     return mBirthday ;
 }
 bool Incidence::isAnniversary() const
 {
     return mAnniversary ;
 
 }
 
 bool Incidence::hasRecurrenceID() const
 {
     return mHasRecurrenceID;
 }
 
 void Incidence::setHasRecurrenceID( bool b )
 {
     mHasRecurrenceID = b;
 }
    
 void Incidence::setRecurrenceID(QDateTime d)
 {
     mRecurrenceID = d;
     mHasRecurrenceID = true;
     updated(); 
 }
 QDateTime Incidence::recurrenceID () const
 {
     return mRecurrenceID;
 }
 
 bool Incidence::cancelled() const
 {
     return mCancelled;
 }
 void Incidence::setCancelled( bool b )
 {
     mCancelled = b;
     updated();
 }
 bool Incidence::hasStartDate() const
 {
   return mHasStartDate;
 }
 
 void Incidence::setHasStartDate(bool f)
 {
   if (mReadOnly) return;
   mHasStartDate = f;
   updated();
 }
 
 // A string comparison that considers that null and empty are the same
 static bool stringCompare( const QString& s1, const QString& s2 )
 {
     if ( s1.isEmpty() && s2.isEmpty() )
         return true;
     return s1 == s2;
 }
 
 bool KCal::operator==( const Incidence& i1, const Incidence& i2 )
 {
   
     if( i1.alarms().count() != i2.alarms().count() ) {
         return false; // no need to check further
     }
     if ( i1.alarms().count() > 0 ) {
         if ( !( *(i1.alarms().first()) == *(i2.alarms().first())) ) 
             {
             qDebug("alarm not equal ");
             return false;
         }
     }
 #if 0
     QPtrListIterator<Alarm> a1( i1.alarms() );
     QPtrListIterator<Alarm> a2( i2.alarms() );
     for( ; a1.current() && a2.current(); ++a1, ++a2 ) {
         if( *a1.current() == *a2.current() ) {
             continue;
         }
         else {
             return false;
         }
     }
 #endif
   
     if ( i1.hasRecurrenceID() == i2.hasRecurrenceID() ) {
         if ( i1.hasRecurrenceID() ) {
             if ( i1.recurrenceID() != i2.recurrenceID() )
                 return false;
         }
 
     } else {
         return false;
     }
 
     if ( ! operator==( (const IncidenceBase&)i1, (const IncidenceBase&)i2 ) )
         return false;
     if ( i1.hasStartDate() == i2.hasStartDate() ) {
         if ( i1.hasStartDate() ) {
             if ( i1.dtStart() != i2.dtStart() )
                 return false;
         }
     } else {
         return false;
     }
     if ( i1.mRecurrence != 0 && i2.mRecurrence != 0 ) {
         if (!( *i1.mRecurrence == *i2.mRecurrence) ) {
             //qDebug("recurrence is NOT equal ");
             return false;
         }
     } else {
         // one ( or both ) recurrence is 0
         if ( i1.mRecurrence == 0 ) {
             if ( i2.mRecurrence != 0 && i2.mRecurrence->doesRecur() != Recurrence::rNone )
                 return false;
         } else {
             // i1.mRecurrence != 0
             // i2.mRecurrence == 0
             if ( i1.mRecurrence->doesRecur() != Recurrence::rNone )
                 return false;
         }
     }
    
     return
         //  i1.created() == i2.created() &&
         stringCompare( i1.description(), i2.description() ) &&
         stringCompare( i1.summary(), i2.summary() ) &&
         i1.categories() == i2.categories() &&
         // no need to compare mRelatedTo
         stringCompare( i1.relatedToUid(), i2.relatedToUid() ) &&
         //      i1.relations() == i2.relations() &&
         i1.exDates() == i2.exDates() &&
         i1.attachments() == i2.attachments() &&
         i1.resources() == i2.resources() &&
         i1.secrecy() == i2.secrecy() &&
         i1.priority() == i2.priority() &&
         i1.cancelled() == i2.cancelled() &&
         stringCompare( i1.location(), i2.location() );
 }
 
 Incidence* Incidence::recreateCloneException( QDate d  )
 {
     Incidence* newInc = clone();
     newInc->recreate();
     if ( doesRecur() ) {
         addExDate( d );
         newInc->recurrence()->unsetRecurs();
         if ( typeID() == eventID ) {
             int len = dtStart().secsTo( ((Event*)this)->dtEnd());
             QTime tim = dtStart().time();
             newInc->setDtStart( QDateTime(d, tim) );
             ((Event*)newInc)->setDtEnd( newInc->dtStart().addSecs( len ) );
         } else {
             int len = dtStart().secsTo( ((Todo*)this)->dtDue());
             QTime tim = ((Todo*)this)->dtDue().time();
             ((Todo*)newInc)->setDtDue( QDateTime(d, tim) );
             ((Todo*)newInc)->setDtStart( ((Todo*)newInc)->dtDue().addSecs( -len ) );
             ((Todo*)this)->setRecurDates();
         }
         newInc->setExDates( DateList () );
     }
     return newInc;
 }
 
 void Incidence::recreate()
 {
   setCreated(QDateTime::currentDateTime());
 
   setUid(CalFormat::createUniqueId());
 
   setRevision(0);
   setIDStr( ":" );
   setLastModified(QDateTime::currentDateTime());
 }
 void Incidence::cloneRelations( Incidence * newInc )
 {
     // newInc is already a clone of this incidence
     Incidence * inc;
     Incidence * cloneInc;
     QPtrList<Incidence> Relations = relations();
     for (inc=Relations.first();inc;inc=Relations.next()) {
         cloneInc = inc->clone();
         cloneInc->recreate();
         cloneInc->setRelatedTo( newInc );
         inc->cloneRelations( cloneInc );
     } 
 }
 void Incidence::setReadOnly( bool readOnly )
 {
   IncidenceBase::setReadOnly( readOnly );
   if ( mRecurrence )
       mRecurrence->setRecurReadOnly( readOnly);
 }
 void Incidence::setLastModifiedSubInvalid()
 {
     mLastModifiedSub = QDateTime();
     if ( mRelatedTo )
         mRelatedTo->setLastModifiedSubInvalid();
 }
 QDateTime Incidence::lastModifiedSub()
 {
     if ( !mRelations.count() )
         return lastModified();
     if ( mLastModifiedSub.isValid() )
         return mLastModifiedSub;
     mLastModifiedSub = lastModified();
     Incidence * inc;
     QPtrList<Incidence> Relations = relations();
     for (inc=Relations.first();inc;inc=Relations.next()) {
         if ( inc->lastModifiedSub() > mLastModifiedSub )
             mLastModifiedSub = inc->lastModifiedSub();
     }
     return mLastModifiedSub;
 }
 void Incidence::setCreated(QDateTime created)
 {
   if (mReadOnly) return;
   mCreated = getEvenTime(created);
 }
 
 QDateTime Incidence::created() const
 {
   return mCreated;
 }
 
 void Incidence::setRevision(int rev)
 {
   if (mReadOnly) return;
   mRevision = rev;
 
   updated();
 }
 
 int Incidence::revision() const
 {
   return mRevision;
 }
 
 void Incidence::setDtStart(const QDateTime &dtStart)
 {
 
   QDateTime  dt = getEvenTime(dtStart);
 
   if ( mRecurrence )
       mRecurrence->setRecurStart( dt);
   IncidenceBase::setDtStart( dt );
 }
 
 void Incidence::setDescription(const QString &description)
 {
diff --git a/libkcal/incidence.h b/libkcal/incidence.h
index 8519f01..88df217 100644
--- a/libkcal/incidence.h
+++ b/libkcal/incidence.h
@@ -28,295 +28,296 @@
 #include <qvaluelist.h>
 
 #include "recurrence.h"
 #include "alarm.h"
 #include "attachment.h"
 #include "listbase.h"
 #include "incidencebase.h"
 
 namespace KCal {
 
 class Event;
 class Todo;
 class Journal;
 
 /**
   This class provides the base class common to all calendar components.
 */
 class Incidence : public IncidenceBase
 {
   public:
     /**
       This class provides the interface for a visitor of calendar components. It
       serves as base class for concrete visitors, which implement certain actions on
       calendar components. It allows to add functions, which operate on the concrete
       types of calendar components, without changing the calendar component classes.
     */
     class Visitor
     {
       public:
         /** Destruct Incidence::Visitor */
         virtual ~Visitor() {}
 
         /**
           Reimplement this function in your concrete subclass of IncidenceVisitor to perform actions
           on an Event object.
         */
         virtual bool visit(Event *) { return false; }
         /**
           Reimplement this function in your concrete subclass of IncidenceVisitor to perform actions
           on an Todo object.
         */
         virtual bool visit(Todo *) { return false; }
         /**
           Reimplement this function in your concrete subclass of IncidenceVisitor to perform actions
           on an Journal object.
         */
         virtual bool visit(Journal *) { return false; }
 
       protected:
         /** Constructor is protected to prevent direct creation of visitor base class. */
         Visitor() {}
     };
 
     /**
       This class implements a visitor for adding an Incidence to a resource
       supporting addEvent(), addTodo() and addJournal() calls.
     */
     template<class T>
     class AddVisitor : public Visitor
     {
       public:
         AddVisitor( T *r ) : mResource( r ) {}
         bool visit( Event *e ) { return mResource->addEvent( e ); }
         bool visit( Todo *t ) { return mResource->addTodo( t ); }
         bool visit( Journal *j ) { return mResource->addJournal( j ); }
 
       private:
         T *mResource;
     };
 
     /** enumeration for describing an event's secrecy. */
     enum { SecrecyPublic = 0, SecrecyPrivate = 1, SecrecyConfidential = 2 };
     typedef ListBase<Incidence> List;
     Incidence();
     Incidence(const Incidence &);
     ~Incidence();
 
     /**
       Accept IncidenceVisitor. A class taking part in the visitor mechanism has to
       provide this implementation:
       <pre>
         bool accept(Visitor &v) { return v.visit(this); }
       </pre>
     */
     virtual bool accept(Visitor &) { return false; }
 
     virtual Incidence *clone() = 0;
     virtual void cloneRelations( Incidence * );
     void addRelationsToList(QPtrList<Incidence> *rel);
     virtual QDateTime getNextAlarmDateTime( bool * ok, int * offset, QDateTime start_dt ) const = 0;
     void setReadOnly( bool );
 
     /**
       Recreate event. The event is made a new unique event, but already stored
       event information is preserved. Sets uniquie id, creation date, last
       modification date and revision number.
     */
     void recreate();
     Incidence*  recreateCloneException(QDate);
 
     /** set creation date */
     void setCreated(QDateTime);
     /** return time and date of creation. */
     QDateTime created() const;
 
     /** set the number of revisions this event has seen */
     void setRevision(int rev);
     /** return the number of revisions this event has seen */
     int revision() const;
 
     /** Set starting date/time. */
     virtual void setDtStart(const QDateTime &dtStart);
     /** Return the incidence's ending date/time as a QDateTime. */
     virtual QDateTime dtEnd() const  { return QDateTime(); }
 
     /** sets the event's lengthy description. */
     void setDescription(const QString &description);
     /** returns a reference to the event's description. */
     QString description() const;
 
     /** sets the event's short summary. */
     void setSummary(const QString &summary);
     /** returns a reference to the event's summary. */
     QString summary() const;
 
     /** set event's applicable categories */
     void setCategories(const QStringList &categories, bool setForRelations = false);
     void addCategories(const QStringList &categories, bool addToRelations = false);
     /** set event's categories based on a comma delimited string */
     void setCategories(const QString &catStr);
     /** return categories in a list */
     QStringList categories() const;
     QStringList* categoriesP();
     /** return categories as a comma separated string */
     QString categoriesStr();
     QString categoriesStrWithSpace();
 
     /** point at some other event to which the event relates. This function should
      *  only be used when constructing a calendar before the related Event
      *  exists. */
     void setRelatedToUid(const QString &);
     /** what event does this one relate to? This function should
      *  only be used when constructing a calendar before the related Event
      *  exists. */
     QString relatedToUid() const;
     /** point at some other event to which the event relates */
     void setRelatedTo(Incidence *relatedTo);
     /** what event does this one relate to? */
     Incidence *relatedTo() const;
     /** All events that are related to this event */
     QPtrList<Incidence> relations() const;
     /** Add an event which is related to this event */
     void addRelation(Incidence *);
     /** Remove event that is related to this event */
     void removeRelation(Incidence *);
 
     /** returns the list of dates which are exceptions to the recurrence rule */
     DateList exDates() const;
     /** sets the list of dates which are exceptions to the recurrence rule */
     void setExDates(const DateList &_exDates);
     void setExDates(const char *dates);
     /** Add a date to the list of exceptions of the recurrence rule. */
     void addExDate(const QDate &date);
 
     /** returns true if there is an exception for this date in the recurrence
      rule set, or false otherwise. */
     bool isException(const QDate &qd) const;
 
     /** add attachment to this event */
     void addAttachment(Attachment *attachment);
     /** remove and delete a specific attachment */
     void deleteAttachment(Attachment *attachment);
     /** remove and delete all attachments with this mime type */
     void deleteAttachments(const QString& mime);
     /** return list of all associated attachments */
     QPtrList<Attachment> attachments() const;
     /** find a list of attachments with this mime type */
     QPtrList<Attachment> attachments(const QString& mime) const;
 
     /** sets the event's status the value specified.  See the enumeration
      * above for possible values. */
     void setSecrecy(int);
     /** return the event's secrecy. */
     int secrecy() const;
     /** return the event's secrecy in string format. */
     QString secrecyStr() const;
     /** return list of all availbale secrecy classes */
     static QStringList secrecyList();
     /** return human-readable name of secrecy class */
     static QString secrecyName(int);
 
     /** returns TRUE if the date specified is one on which the event will
      * recur. */
     bool recursOn(const QDate &qd) const;
 
     // VEVENT and VTODO, but not VJOURNAL (move to EventBase class?):
 
     /** set resources used, such as Office, Car, etc. */
     void setResources(const QStringList &resources);
     /** return list of current resources */
     QStringList resources() const;
 
     /** set the event's priority, 0 is undefined, 1 highest (decreasing order) */
     void setPriority(int priority);
     /** get the event's priority */
     int priority() const;
 
     /** All alarms that are associated with this incidence */
     QPtrList<Alarm> alarms() const;
     /** Create a new alarm which is associated with this incidence */
     Alarm* newAlarm();
     /** Add an alarm which is associated with this incidence */
     void addAlarm(Alarm*);
     /** Remove an alarm that is associated with this incidence */
     void removeAlarm(Alarm*);
     /** Remove all alarms that are associated with this incidence */
     void clearAlarms();
     /** return whether any alarm associated with this incidence is enabled */
     bool isAlarmEnabled() const;
 
     /**
       Return the recurrence rule associated with this incidence. If there is
       none, returns an appropriate (non-0) object.
     */
     Recurrence *recurrence();
     void setRecurrence(Recurrence * r);
     /**
       Forward to Recurrence::doesRecur().
     */
     ushort doesRecur() const;
 
     /** set the event's/todo's location. Do _not_ use it with journal */
     void setLocation(const QString &location);
     /** return the event's/todo's location. Do _not_ use it with journal */
     QString location() const;  
    /** returns TRUE or FALSE depending on whether the todo has a start date */
     bool hasStartDate() const;
     /** sets the event's hasStartDate value. */
     void setHasStartDate(bool f);
     QDateTime getNextOccurence( const QDateTime& dt, bool* yes ) const;
     bool cancelled() const;
     void setCancelled( bool b );
     
     bool hasRecurrenceID() const;
     void setHasRecurrenceID( bool b );
     
     void setRecurrenceID(QDateTime);
     QDateTime recurrenceID () const;
     QDateTime dtStart() const;
     bool isHoliday() const;
     bool isBirthday() const;
     bool isAnniversary() const;
     QDateTime lastModifiedSub();
     QString recurrenceText() const;
     void setLastModifiedSubInvalid();
     
-
+    virtual QString durationText();
+    QString durationText4Time( int secs );
     Recurrence *mRecurrence;
 protected:
     QPtrList<Alarm> mAlarms;
     QPtrList<Incidence> mRelations;
     QDateTime mRecurrenceID;
     bool mHasRecurrenceID;
   private:
     void checkCategories();
     bool mHoliday, mBirthday, mAnniversary;
     int mRevision;
     bool mCancelled;
 
     // base components of jounal, event and todo
     QDateTime mCreated;
     QDateTime mLastModifiedSub;
     QString mDescription;
     QString mSummary;
     QStringList mCategories;
     Incidence *mRelatedTo;
     QString mRelatedToUid;
     DateList mExDates;
     QPtrList<Attachment> mAttachments;
     QStringList mResources;
     bool mHasStartDate;                  // if todo has associated start date
 
     int mSecrecy;
     int mPriority;                        // 1 = highest, 2 = less, etc.
 
     //QPtrList<Alarm> mAlarms;
     
     QString mLocation;
 };
 
 bool operator==( const Incidence&, const Incidence& );
 
 }
 
 #endif
diff --git a/libkcal/todo.cpp b/libkcal/todo.cpp
index 7bf756a..e4508a0 100644
--- a/libkcal/todo.cpp
+++ b/libkcal/todo.cpp
@@ -361,256 +361,266 @@ int Todo::hasDueSubTodoForDate( const QDate & date, bool checkSubtodos  )
     }
     return retval;
 }
 int Todo::hasDueSubTodo( bool checkSubtodos  ) //= true
 {  
     return hasDueSubTodoForDate(QDate::currentDate(), checkSubtodos );
 }
 bool Todo::hasDueDate() const
 {
   return mHasDueDate;
 }
 
 void Todo::setHasDueDate(bool f)
 {
   if (mReadOnly) return;
   mHasDueDate = f;
   updated();
 }
 
 
 #if 0
 void Todo::setStatus(const QString &statStr)
 {
   if (mReadOnly) return;
   QString ss(statStr.upper());
 
   if (ss == "X-ACTION")
     mStatus = NEEDS_ACTION;
   else if (ss == "NEEDS ACTION")
     mStatus = NEEDS_ACTION;
   else if (ss == "ACCEPTED")
     mStatus = ACCEPTED;
   else if (ss == "SENT")
     mStatus = SENT;
   else if (ss == "TENTATIVE")
     mStatus = TENTATIVE;
   else if (ss == "CONFIRMED")
     mStatus = CONFIRMED;
   else if (ss == "DECLINED")
     mStatus = DECLINED;
   else if (ss == "COMPLETED")
     mStatus = COMPLETED;
   else if (ss == "DELEGATED")
     mStatus = DELEGATED;
 
   updated();
 }
 
 void Todo::setStatus(int status)
 {
   if (mReadOnly) return;
   mStatus = status;
   updated();
 }
 
 int Todo::status() const
 {
   return mStatus;
 }
 
 QString Todo::statusStr() const
 {
   switch(mStatus) {
   case NEEDS_ACTION:
     return QString("NEEDS ACTION");
     break;
   case ACCEPTED:
     return QString("ACCEPTED");
     break;
   case SENT:
     return QString("SENT");
     break;
   case TENTATIVE:
     return QString("TENTATIVE");
     break;
   case CONFIRMED:
     return QString("CONFIRMED");
     break;
   case DECLINED:
     return QString("DECLINED");
     break;
   case COMPLETED:
     return QString("COMPLETED");
     break;
   case DELEGATED:
     return QString("DELEGATED");
     break;
   }
   return QString("");
 }
 #endif
 
 bool Todo::isCompleted() const
 {
     if (mPercentComplete == 100) {
         return true;
     }
     else return false;
 }
 
 void Todo::setCompleted(bool completed)
 {
     if ( mHasRecurrenceID && completed && mPercentComplete != 100 ) {
         if ( !setRecurDates() )
             completed = false;
     }
   if (completed) mPercentComplete = 100;
   else {
       mPercentComplete = 0;
       mHasCompletedDate = false;
   }
   updated();
 }
 
 QDateTime Todo::completed() const
 {
   return mCompleted;
 }
 
 QString Todo::completedStr( bool shortF ) const
 {
     return KGlobal::locale()->formatDateTime(mCompleted, shortF);
 }
 
 void Todo::setCompleted(const QDateTime &completed)
 {
     //qDebug("Todo::setCompleted ");
     if ( mHasCompletedDate ) {
         // qDebug("has completed data - return ");
         return;
     }
   mHasCompletedDate = true;
   mPercentComplete = 100;
   mCompleted = getEvenTime(completed);
   updated();
 }
 
 bool Todo::hasCompletedDate() const
 {
   return mHasCompletedDate;
 }
 
 int Todo::percentComplete() const
 {
   return mPercentComplete;
 }
 bool Todo::setRecurDates()
 {
     if ( !mHasRecurrenceID )
         return true;
     int secs = mDtStart.secsTo( dtDue() );   
     bool ok;
     qDebug("T:setRecurDates() ");
     //qDebug("%s %s %s ",mDtStart.toString().latin1(), dtDue().toString().latin1(),mRecurrenceID.toString().latin1() );
     QDateTime next = getNextOccurence(  mRecurrenceID, &ok );
     if ( ok ) { 
         mRecurrenceID = next;
         mDtStart = next;
         setDtDue( next.addSecs( secs ) );
         if ( QDateTime::currentDateTime() > next) 
             return false;
     } else {
         setHasRecurrenceID( false );
         recurrence()->unsetRecurs();
     }
     return true;
 }
 void Todo::setPercentComplete(int v)
 { 
     if ( mHasRecurrenceID && v == 100 && mPercentComplete != 100 ) {
         if ( !setRecurDates() )
             v = 0;
     }
   mPercentComplete = v;
   if ( v != 100 )
       mHasCompletedDate = false;
   updated();
 }
 QDateTime Todo::getNextAlarmDateTime( bool * ok, int * offset, QDateTime start_dt ) const
 {
     *ok = false;
     if ( ! hasDueDate() || cancelled() || !alarmEnabled() ) {
          return QDateTime ();
      }
     // if the recurring todo is set to complete and requested time < start time of todo
     // we want to get the alarm.
     bool iscompleted = isCompleted();
     if ( iscompleted && doesRecur() ) {
         Todo * to = (Todo*) this;
         to->checkSetCompletedFalse();
         iscompleted = isCompleted();
         if ( hasStartDate() && start_dt < dtStart() ){
             iscompleted = false;
         }
     }
     if ( iscompleted ) {
         return QDateTime ();
     }
      QDateTime incidenceStart;
      incidenceStart = dtDue(); 
      bool enabled = false;
      Alarm* alarm;
      int off = 0;
      QDateTime alarmStart = QDateTime::currentDateTime().addDays( 3650 );;
     //  if ( QDateTime::currentDateTime() > incidenceStart ){
 //          *ok = false;
 //          return incidenceStart;
 //      }
      for (QPtrListIterator<Alarm> it(mAlarms); (alarm = it.current()) != 0; ++it) {
          if (alarm->enabled()) {
              if ( alarm->hasTime () ) {
                  if ( alarm->time() < alarmStart ) {
                      alarmStart = alarm->time();
                      enabled = true;
                      off = alarmStart.secsTo( incidenceStart );
                  }
 
              } else {
                  int secs = alarm->startOffset().asSeconds();
                  if ( incidenceStart.addSecs( secs ) < alarmStart ) {
                      alarmStart = incidenceStart.addSecs( secs );
                      enabled = true;
                      off = -secs;
                  }
              }
          }
      }
      if ( enabled ) {
          if ( alarmStart >  start_dt  ) {
              *ok = true;
              * offset = off;
              return alarmStart;
          }
      }
      *ok = false;
      return QDateTime ();
 
 }
 
 void Todo::checkSetCompletedFalse()
 {
     if ( !mHasRecurrenceID ) {
         qDebug("ERROR 1 in Todo::checkSetCompletedFalse");
         return;
     }
     // qDebug("Todo::checkSetCompletedFalse()");
     //qDebug("%s %s %s ",mDtStart.toString().latin1(), dtDue().toString().latin1(),mRecurrenceID.toString().latin1() );
     if ( mPercentComplete == 100 ) {
         QDateTime dt = QDateTime::currentDateTime();
         if ( dt > mDtStart && dt > mRecurrenceID ) {
             qDebug("start: %s --due: %s --recID: %s ",mDtStart.toString().latin1(), dtDue().toString().latin1(),mRecurrenceID.toString().latin1() );
             setCompleted( false );
             qDebug("Todo::checkSetCompletedFalse ");
         }
     }
 }
+QString Todo::durationText()
+{
+    if ( mHasDueDate && hasStartDate() ) {
+        int sec = dtStart().secsTo( dtDue() );
+        if ( doesFloat() )
+            sec += 86400;
+        return durationText4Time( sec );
+    }
+    return "---";
+}
diff --git a/libkcal/todo.h b/libkcal/todo.h
index 425dfad..7feb32e 100644
--- a/libkcal/todo.h
+++ b/libkcal/todo.h
@@ -1,155 +1,156 @@
 /*
     This file is part of libkcal.
     Copyright (c) 2001 Cornelius Schumacher <schumacher@kde.org>
 
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
     version 2 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 #ifndef TODO_H
 #define TODO_H
 //
 // Todo component, representing a VTODO object
 //
 
 #include "incidence.h"
 
 #include <qtimer.h>
 
 namespace KCal {
 
 /**
   This class provides a Todo in the sense of RFC2445.
 */
     class Todo : public QObject,public Incidence
 {
  Q_OBJECT
   public:
     Todo();
     Todo(const Todo &);
     ~Todo();
     typedef ListBase<Todo> List;
     QCString type() const { return "Todo"; }
     IncTypeID typeID() const { return todoID; }
 
     /** Return an exact copy of this todo. */
     Incidence *clone();
     QDateTime getNextAlarmDateTime( bool * ok, int * offset, QDateTime start_dt ) const;
 
     /** for setting the todo's due date/time with a QDateTime. */
     void setDtDue(const QDateTime &dtDue);
     /** returns an event's Due date/time as a QDateTime. */
     QDateTime dtDue() const;
     /** returns an event's due time as a string formatted according to the
      users locale settings */
     QString dtDueTimeStr() const;
     /** returns an event's due date as a string formatted according to the
      users locale settings */
     QString dtDueDateStr(bool shortfmt=true) const;
     /** returns an event's due date and time as a string formatted according
      to the users locale settings */
     QString dtDueStr(bool shortfmt=true) const;
 
     /** returns TRUE or FALSE depending on whether the todo has a due date */
     bool hasDueDate() const;
     /** sets the event's hasDueDate value. */
     void setHasDueDate(bool f);
 
     /*
       Looks for a subtodo (including itself ) which is not complete and is
       - overdue, or
       - due today.
       It returns 0 for nothing found,
       1 for found a todo which is due today and no overdue found
       2 for found a overdue todo
     */
     int hasDueSubTodo( bool checkSubtodos = true );
     /* same as above, but a specific date can be specified*/
     int hasDueSubTodoForDate( const  QDate & date, bool checkSubtodos );
 
  
     /** sets the event's status to the string specified.  The string
      * must be a recognized value for the status field, i.e. a string
      * equivalent of the possible status enumerations previously described. */
 //    void setStatus(const QString &statStr);
     /** sets the event's status to the value specified.  See the enumeration
      * above for possible values. */
 //    void setStatus(int);
     /** return the event's status. */
 //    int status() const;
     /** return the event's status in string format. */
 //    QString statusStr() const;
 
     /** return, if this todo is completed */
     bool isCompleted() const;
     /** set completed state of this todo */
     void setCompleted(bool);
     
     /**
       Return how many percent of the task are completed. Returns a value
       between 0 and 100.
     */
     int percentComplete() const;
     /**
       Set how many percent of the task are completed. Valid values are in the
       range from 0 to 100.
     */
     void setPercentComplete(int);
 
     /** return date and time when todo was completed */
     QDateTime completed() const;
     QString completedStr(bool shortF = true) const;
     /** set date and time of completion */
     void setCompleted(const QDateTime &completed);
 
     /** Return true, if todo has a date associated with completion */
     bool hasCompletedDate() const;
     bool contains ( Todo*);
     void checkSetCompletedFalse();
     bool setRecurDates();
     bool isRunning() {return mRunning;}
     bool hasRunningSub();
     void setRunning( bool );
     void setRunningFalse( QString );
     void stopRunning();
     int runTime();
     QDateTime runStart () const { return mRunStart;}
     void saveRunningInfo( QString comment, QDateTime start, QDateTime end );
     public slots:
     void saveRunningInfoToFile( QString st );
     void saveRunningInfoToFile( );
     void saveParents();
+    QString durationText();
   private:
     bool mRunning;
     QTimer * mRunSaveTimer;
     QDateTime mRunStart;
     QDateTime mRunEnd;
     bool accept(Visitor &v) { return v.visit(this); }
 
     QDateTime mDtDue;                     // due date of todo
 
     bool mHasDueDate;                    // if todo has associated due date
 
 //    int  mStatus;                         // confirmed/delegated/tentative/etc
 
     QDateTime mCompleted;
     bool mHasCompletedDate;
 
     int mPercentComplete;
 };
 
     bool operator==( const Todo&, const Todo& );
 }
 
 #endif