sync

1 files changed, 4 insertions, 4 deletions

diff --git a/libkdepim/ksyncmanager.cpp b/libkdepim/ksyncmanager.cpp
index 8bf0d27..fa7804e 100644
--- a/libkdepim/ksyncmanager.cpp
+++ b/libkdepim/ksyncmanager.cpp
@@ -1214,129 +1214,129 @@ void KSyncManager::deleteCommandSocket(KCommandSocket*s, int state)
         if ( state == KCommandSocket::errorR ) {
             KCommandSocket* commandSocket = new KCommandSocket( "",mPassWordPiSync, mActiveSyncPort.toUInt(), mActiveSyncIP, this, mParent->topLevelWidget());
             connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int)), this, SLOT(deleteCommandSocket(KCommandSocket*, int )) );
             commandSocket->sendStop();
         }
         mPisyncFinished = true;
         return;
         
     } else  if ( state == KCommandSocket::errorW ) {
         mParent->topLevelWidget()->setCaption( i18n("ERROR:Writing back file failed.") );
         mPisyncFinished = true;
 
     } else  if ( state == KCommandSocket::successR ) {
         QTimer::singleShot( 1, this , SLOT ( readFileFromSocket()));
 
     } else  if ( state == KCommandSocket::successW ) {
         mParent->topLevelWidget()->setCaption( i18n("Pi-Sync successful!") );
         mPisyncFinished = true;
     } else  if ( state == KCommandSocket::quiet ){
         qDebug("KSS: quiet ");
         mPisyncFinished = true;
     } else {
         qDebug("KSS: Error: unknown state: %d ", state);
         mPisyncFinished = true;
     }
 
     delete s;
 }
 
 void KSyncManager::readFileFromSocket()
 {
     QString fileName = syncFileName();
     bool syncOK = true;
     mParent->topLevelWidget()->setCaption( i18n("Remote file saved to temp file.") );
     if ( ! syncWithFile( fileName , true ) ) {
         mParent->topLevelWidget()->setCaption( i18n("Syncing failed.") );
         syncOK = false;
     }
     KCommandSocket* commandSocket = new KCommandSocket( mCurrentResourceRemote,mPassWordPiSync, mActiveSyncPort.toUInt(), mActiveSyncIP, this, mParent->topLevelWidget() );
     connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int)), this, SLOT(deleteCommandSocket(KCommandSocket*, int )) );
     if ( mWriteBackFile && syncOK  ) {
         mParent->topLevelWidget()->setCaption( i18n("Sending back file ...") );
         commandSocket->writeFile(  fileName );
     }
     else {
         commandSocket->sendStop();
         if ( syncOK ) 
             mParent->topLevelWidget()->setCaption( i18n("Pi-Sync succesful!") );
         mPisyncFinished = true;
     }
 }
 
 KServerSocket:: KServerSocket ( QString pw, Q_UINT16 port, int backlog, QObject * parent, const char * name ) : QServerSocket( port, backlog, parent, name )
 {
     mPendingConnect = 0;
     mPassWord = pw;
     mSocket = 0;
     mSyncActionDialog = 0;
     blockRC = false;
     mErrorMessage = 0;
 }
 void KServerSocket::waitForSocketFinish()
 {
     if (  mSocket ) {
-        qDebug("KSS:: waiting for finish operation");
+        //qDebug("KSS:: waiting for finish operation");
         QTimer::singleShot( 250, this , SLOT ( waitForSocketFinish()));
         return;
     }
     mSocket = new QSocket( this );
     connect( mSocket , SIGNAL(readyRead()), this, SLOT(readClient()) );
     connect( mSocket , SIGNAL(delayedCloseFinished()), this, SLOT(discardClient()) );
     mSocket->setSocket( mPendingConnect );
     mPendingConnect = 0;
 }
 void KServerSocket::newConnection ( int socket ) 
 {
     // qDebug("KServerSocket:New connection %d ", socket); 
     if ( mPendingConnect ) {
         qDebug("KSS::Error : new Connection");
         return;
     }
     if ( mSocket ) {
         mPendingConnect = socket;
         QTimer::singleShot( 250, this , SLOT ( waitForSocketFinish()));
         return;
         qDebug("KSS::newConnection Socket deleted! ");
         delete mSocket;
         mSocket = 0;
     }
     mPendingConnect = 0;
     mSocket = new QSocket( this );
     connect( mSocket , SIGNAL(readyRead()), this, SLOT(readClient()) );
     connect( mSocket , SIGNAL(delayedCloseFinished()), this, SLOT(discardClient()) );
     mSocket->setSocket( socket );
 }
 
 void KServerSocket::discardClient()
 {
     QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
 }
 void KServerSocket::deleteSocket()
 {
     qDebug("KSS::deleteSocket");
     if ( mSocket ) {
         delete mSocket;
         mSocket = 0;
     }
     if ( mErrorMessage )
         QTimer::singleShot( 10, this , SLOT ( displayErrorMessage()));
 }
 void KServerSocket::readClient()
 {
     if ( blockRC )
         return;
     if ( mSocket == 0 ) {
         qDebug("ERROR::KSS::readClient(): mSocket == 0  ");
         return;
     }
     if ( mErrorMessage ) {
         mErrorMessage = 999;
         error_connect("ERROR_ED\r\n\r\n");
         return;
     }
     mResource = "";
     mErrorMessage = 0;
     //qDebug("KServerSocket::readClient()");
     if ( mSocket->canReadLine() ) {
         QString line = mSocket->readLine();
         //qDebug("KServerSocket readline: %s ", line.latin1());
@@ -1527,153 +1527,153 @@ void KServerSocket::readBackFileFromSocket()
         blockRC = false;
         return ;
                     
     } 
 
     // mView->setLoadedFileVersion(QDateTime::currentDateTime().addSecs( -1));
     QTextStream ts ( &file );
     ts.setEncoding( QTextStream::Latin1 );
     mSyncActionDialog->setCaption( i18n("Writing file to disk...") );
     ts << piFileString;
     mSocket->close();
     if ( mSocket->state() == QSocket::Idle )
         QTimer::singleShot( 10, this , SLOT ( discardClient()));
     file.close(); 
     piFileString = "";
     emit file_received( true, mResource );
     emit file_received( true);
     delete mSyncActionDialog;
     mSyncActionDialog = 0;
     blockRC = false;
 
 }
 
 KCommandSocket::KCommandSocket ( QString remres, QString password, Q_UINT16 port, QString host, QObject * parent, QWidget * cap,  const char * name ): QObject( parent, name )
 {
     mRemoteResource = remres;
     if ( mRemoteResource.isEmpty() )
         mRemoteResource = "ALL";
     else
         mRemoteResource.replace (QRegExp (" "),"_" );
     mPassWord = password;
     mSocket = 0;
     mFirst = false;
     mFirstLine = true;
     mPort = port;
     mHost = host;
     tlw = cap;
     mRetVal = quiet;
     mTimerSocket = new QTimer ( this );
     connect( mTimerSocket, SIGNAL ( timeout () ), this, SLOT ( updateConnectDialog() ) );
     mConnectProgress.setCaption( i18n("Pi-Sync") );
     connect( &mConnectProgress, SIGNAL ( cancelled () ), this, SLOT ( deleteSocket() ) );
     mConnectCount = -1;
 }
 void KCommandSocket::sendFileRequest()
 {
     if ( tlw )
         tlw->setCaption( i18n("Connected! Sending request for remote file ...") );
     mConnectProgress.hide();
     mConnectCount = 300;mConnectMax = 300;
     mConnectProgress.setCaption( i18n("Pi-Sync: Connected!") );
     mConnectProgress.setLabelText( i18n("Waiting for remote file...") ); 
     mTimerSocket->start( 100, true );
     QTextStream os( mSocket );
     os.setEncoding( QTextStream::Latin1 );
 
     QString curDt = " " +KGlobal::locale()->formatDateTime(QDateTime::currentDateTime().addSecs(-1),true, true,KLocale::ISODate );
     os << "GET " << mPassWord << curDt << " " << mRemoteResource  << "\r\n\r\n";
 }
 
 void KCommandSocket::readFile( QString fn )
 {
     if ( !mSocket ) {
         mSocket = new QSocket( this ); 
-        qDebug("KCS: read file - new socket");
+        //qDebug("KCS: read file - new socket");
         connect( mSocket, SIGNAL(readyRead()), this, SLOT(startReadFileFromSocket()) );
         connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
         connect( mSocket, SIGNAL(connected ()), this, SLOT(sendFileRequest() ));
     }
     mFileString = "";
     mFileName = fn;
     mFirst = true;
     if ( tlw )
         tlw->setCaption( i18n("Trying to connect to remote...") );
     mConnectCount = 30;mConnectMax = 30;
     mTimerSocket->start( 1000, true );
     mSocket->connectToHost( mHost, mPort ); 
     qDebug("KCS: Waiting for connection");
 }
 void KCommandSocket::updateConnectDialog()
 {
     
     if ( mConnectCount == mConnectMax  ) {
-        qDebug("MAXX %d", mConnectMax);
+        //qDebug("MAXX %d", mConnectMax);
         mConnectProgress.setTotalSteps ( 30 );
         mConnectProgress.show();
         mConnectProgress.setLabelText( i18n("Trying to connect to remote...") );
     }
-    qDebug("updateConnectDialog() %d", mConnectCount);
+    //qDebug("updateConnectDialog() %d", mConnectCount);
     mConnectProgress.raise();
     mConnectProgress.setProgress( (mConnectMax - mConnectCount)%30 );
     --mConnectCount;
     if ( mConnectCount > 0 )
         mTimerSocket->start( 1000, true );
     else
         deleteSocket(); 
     
 }
 void KCommandSocket::writeFile( QString fileName  )
 {
     if ( !mSocket ) {
         mSocket = new QSocket( this );
         connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
         connect( mSocket, SIGNAL(connected ()), this, SLOT(writeFileToSocket()) );
     }
     mFileName = fileName ;
     mConnectCount = 30;mConnectMax = 30;
     mTimerSocket->start( 1000, true );
     mSocket->connectToHost( mHost, mPort ); 
 }
 void KCommandSocket::writeFileToSocket()
 {
     mTimerSocket->stop();
     QFile file2( mFileName );
     if (!file2.open( IO_ReadOnly ) ) {
         mConnectProgress.hide();
         mConnectCount = -1;
         mRetVal= errorW;
         mSocket->close();
         if ( mSocket->state() == QSocket::Idle )
             QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
         return ;
     }  
     mConnectProgress.setTotalSteps ( file2.size() );
     mConnectProgress.show();
     int count = 0;
     mConnectProgress.setLabelText( i18n("Sending back synced file...") );
     mConnectProgress.setProgress( count );
     mConnectProgress.blockSignals( true );
     QTextStream ts2( &file2 );
     ts2.setEncoding( QTextStream::Latin1 );
     QTextStream os2( mSocket );
     os2.setEncoding( QTextStream::Latin1 );
     os2 << "PUT " << mPassWord << " " << mRemoteResource << "\r\n\r\n";;
     int byteCount = 0;
     int byteMax = file2.size()/53;
     while ( ! ts2.atEnd() ) {
         qApp->processEvents();
         if ( byteCount > byteMax ) {
             byteCount = 0;
             mConnectProgress.setProgress( count );
         }
         QString temp = ts2.readLine();
         count += temp.length();
         byteCount += temp.length();
         os2 << temp << "\r\n";
     }
     file2.close();
     mConnectProgress.hide();
     mConnectCount = -1;
     os2 << "\r\n";
     mRetVal= successW;
     mSocket->close();