updated sync howto

1 files changed, 301 insertions, 32 deletions

diff --git a/bin/kdepim/korganizer/howtoSYNC.txt b/bin/kdepim/korganizer/howtoSYNC.txt
index e73709b..ad765d3 100644
--- a/bin/kdepim/korganizer/howtoSYNC.txt
+++ b/bin/kdepim/korganizer/howtoSYNC.txt
@@ -1,2 +1,2 @@
-NOTE:
+WARNING:
 YOU MAY GET UNEXSPECTED (I.E. WRONG) SYNCHRONIZATION RESULTS, 
@@ -6,2 +6,5 @@ HAVE TOO MUCH DIFFERENCE.
 
+In other words: Please make shure, that the clocks of the devices 
+you want to sync have only a difference of some seconds!
+
 
@@ -14,2 +17,3 @@ CONTENT:
 4) Sync preferences
+5) Details about sync profile kinds
 
@@ -19,7 +23,17 @@ CONTENT:
 
-In KO/Pi you can synchronize ( sync ) your calendar 
-with another calendar, by syncing  your (local) calendar with a 
-(remote) file. This remote file may on your local filesystem
+Note:
+The recommended and easiest way to syncronize two devices where 
+KO/Pi or KA/Pi is installed, is the profile kind "Pi-Sync".
+Details about that in 5) b).
+
+In KDE-Pim/Pi you can synchronize ( sync ) your calendar/addressbook 
+with another calendar/addressbook , by syncing  your 
+(local) calendar/addressbook  with a (remote) file. 
+This remote file may on your local filesystem
 or on another (remote) device.
-If it is on another device, you have to specify a 
+
+If you want to sync with another remote device, 
+you have two create a sync profile.
+You have two choices for choosing the profil kind:
+I)  You have to choose profile kind "Remote file" and to specify a 
 command line download/upload command ( like scp, ftp, ...) to 
@@ -28,9 +42,19 @@ b) sync with this temp file
 c) upload the synced file to the remote device
+II) If you want to sync with a device, where KO/Pi( or KA/Pi ) is
+    installed, you can easily get the remote file via network 
+    with the build in file transfer feature:
+    Choose profile kind "Pi-Sync" and
+    a) Start KO/Pi or KA/Pi on remote device and
+       enable "Pi-Sync" on remote device with password and port.
+    b) Specify password, port and IP address in your profile.
+
 
-You should create for every device, to sync with, a sync profile.
+You can sync with your mobile phone as well.
+Everything is explained in more details below.
 
 NOTE:
-Before syncing, it is recommended to close 
-a running KO/Pi on the remote device.
-(Note: KO/Pi running on Zaurus with 
+If you do not use profile kind "Pi-Sync",
+it is recommended to close 
+a running KO/Pi ( or KA/Pi) on the remote device.
+(Note: KO/Pi( or KA/Pi) running on Zaurus with 
 FastLoad enabled will never be closed!)
@@ -45,3 +69,3 @@ you will get the new data showing in remote KO/Pi.
 
-a) Open sync settings dialog
+a) Open sync settings dialog (Menu Synchronize - Configure...)
 b) Give your device a unique name.
@@ -50,3 +74,9 @@ b) Give your device a unique name.
    there a sync profile to sync with this device, give your device
-   the same name as this sync profile! The same name is important!
+   the same name as this sync profile! The same name is important, 
+   because it makes it possible to sync first A->B 
+   (A local device, that performs the sync, B remote device) 
+   and then B->A. Such that the B->A sync knows about the 
+   already performed A->B sync.
+   That means: It is unimportant if you sync A->B or B->A,
+   the devices A and B will be synced properly. 
 c) Create a new sync profile and give it a unique name.
@@ -55,15 +85,13 @@ c) Create a new sync profile and give it a unique name.
    and which has a given unique device name, use this device name as
-   your profile name.
+   your profile name ( refer to b) ).
 d) Coose the profile kind of your syncing method:
       (i) Local file or
-     (ii) Remote file
-c) If you did choose (i), 
-      specify the file name you want to sync with.
-   If you did choose (ii), 
-      specify the system (command line) 
-      download/upload command of the remote file.
-d) Choose the other profile options.
-   Detailed explanation in 2.) 
-e) Close sync dialog with OK.
-f) Sync.
+     (ii) Pi-Sync or
+    (iii) Remote file or
+   (iiii) Mobile Phone.
+   Detailed explanation in 5) 
+e) Choose the other profile options.
+   Detailed explanation in 2) 
+f) Close sync dialog with OK.
+g) Sync.
 
@@ -96,14 +124,23 @@ f) Show summary after sync:
    about number of added/changed/deleted events on local/remote.
-g) Write back existing entries only:
-   Check this to update the remote calendar only.
-   I.e. no event/todo from yor local calendar is added to the
-   remote calendar. You may use this option to 
-   sync against some kind of "public calendar" without 
-   writing back your personal data.
-h) Write back file:
-   Check this to update the local calendar only.
+g) Write back synced data:
+   Uncheck this to update the local calendar only.
    I.e. your local calendar is synced with the remote calendar
    but nothing on the remote calendar is changed.
-i) Profile kind:
-   -> 1) d)
+   If you uncheck "Write back synced data", the settings
+   under h) and i) are ignored, of course.
+h) --Write back (on remote) existing entries only:
+   Check this to update the remote data only.
+   I.e. no data from yor local calendar/addressbook is added to the
+   remote device. You may use this option to 
+   sync against some kind of "public calendar/addressbook" without 
+   writing back your personal data.
+i) --Write back (calendar) entries in future only:
+   Check this to write back only calendar entries in future.
+   (Useful when syncing with mobile phones.)
+   You can specify the date range in weeks with
+   ---- Max. weeks in future.
+   Note: The date range starts always 7 days before the actual date!
+   I.e. the calendar events of the last week are written back always.
+j) Profile kind:
+   Details -> 5)
 
@@ -113,2 +150,4 @@ i) Profile kind:
 
+The same mentioned for calendars is valid for addressbooks as well.
+
 Synchronizing calendars ( i.e. files ) means, 
@@ -197 +236,231 @@ SYNC PREFERENCES:
 
+*************************************************************************
+5) Details about sync profile kinds
+*************************************************************************
+
+a) Local file
+   Please specify a local file you want to sync with.
+
+b) Pi-Sync (direct Kx/Pi to Kx/Pi sync)
+   We mention here only KO/Pi, but the same is valid for KA/Pi.
+   If you want to sync with a device, where KO/Pi is
+   installed, you can easily get the remote file via network 
+   with the build in file transfer feature "Pi-Sync":
+   You have first to enable file transfer on the remote device:
+   - Start KO/Pi on the remote device.
+   - Choose Menu Synchronize-Enable Pi-Sync.
+   - Choose a port number, where KO/Pi should listen for 
+     file sending requests. Valid port numbers are numbers
+     between 1 and 65565. Do not specify port numbers, that are
+     used by other applications. A port number between 9000 and 9999
+     is most likely not used by another application.
+     The default port number is 9197 for KO/Pi.
+     If you specify a port number, which is already in use,
+     you will get an error message when closing this dialog.
+   - Choose a password.
+   - Click OK.
+     Now KO/Pi will send the calendar data via the network, 
+     if some other device is sending a "please send calendar"
+     request on the given port using the given password.
+     If you want to be sure, nobody can access your calendar
+     data, simply disable the file transfer feature on the 
+     remote device after the syncing is done by choosing:
+     Menu Synchronize-Disable Pi-Sync.
+    
+   On your local device, create a new profile and choose
+   profile kind "Pi-Sync".
+   Fill in the needed values:
+   - Password for remote access:
+     The password you specified on the remote device.
+   - Remote IP address:
+     The IP address of the remote device.
+   - Remote port number:
+     The port number you specified on the remote device.
+   
+   Now you can syncronize your local device easily with your 
+   remote device. This works well for all platforms KO/Pi is 
+   running on, e.g. syncing a KO/Pi on Zaurus with KO/Pi on Windows
+   is now very easy.  
+
+c) Remote file
+   Syncing with the profile kind "Remote file" is performed in three steps:
+   i) download the remote file to your local machine to a temp file
+   ii) sync with this temp file
+   iii) upload the synced file to the remote device
+
+   The down-/uploading if i) and iii) is done via a command line command.
+   Please specify the download/upload command ( like scp, ftp, ...) and the
+   file name of the temp file in the corresponding fields.  
+
+d) Mobile device (cell phone)
+   We mention here only KO/Pi, but the same is valid for KA/Pi.
+   Note:
+   It is only possible to sync a mobile phone with one particular device
+   running KO/Pi. If you want to be able to write data of more than one device
+   to the mobile phone (e.g. from your Zaurus and from your Windows Laptop)
+   do not sync with the mobile phone at all, but use the 
+   "Export to phone" functionality from the different devices.
+   Using "Export to phone" makes it not possible to get back data from the
+   phone, if it was changed there, of course.
+   If you sync with the phone, do not use "Export to phone" from any device.
+   (And do not sync, as mentioned above, from any other device with that phone). 
+   It would delete the needed information for syncing with that phone!
+
+   We are using Gammu (Version: 0.98.9) ( http://freshmeat.net/projects/gammu/ ) 
+   for accessing the phones. 
+   Note: You cannot use the original Gammu for syncing KDE-Pim/Pi, because 
+   we have modified the original version to make it useable for syncing!
+   Gammu allows access to many phones in many ways (Irda, Bluetooth, serial,...).
+   The recommended phone access using Gammu with KDE-Pim/Pi is Irda (infrared).
+   Bluetooth access is disabled on the Zaurus, but may work on Windows.
+   Please look at the Gammu homepage and documentation about more details 
+   configuring Gammu how to access your phone.
+   If you have problems accessing your phone, start KO/Pi from the konsole
+   and you will get a more detailed output what went wrong.
+   About Gammu from the Gammu homepage:
+       Gammu (formerly known as MyGnokii2) is a cellular 
+       manager for various mobile phones/modems. 
+       It supports the Nokia 2100, 3100, 32xx, 33xx, 
+       3410, 35xx, 51xx, 5210, 5510, 61xx, 62xx,
+       63xx, 6510, 6610, 6800, 71xx, 7210, 7250, 
+       7250i, 82xx, 83xx, 8910, 9110, 9210 
+       and compatible and AT devices (Siemens, Alcatel, 
+       Falcom, WaveCom, IPAQ, Samsung, SE, and others) 
+       over cables/infrared/BlueTooth.
+   
+   Here is an example what to specify to access a Nokia 6310i via infrared:
+   On Linux (Zaurus):
+     I/O device: /dev/ircomm
+     Connection: irda
+     Model: <leave empty>
+   
+   On Windows:
+     I/O device: <ignored - i.e. leave empty>
+     Connection: irda
+     Model: <leave empty>
+
+   Here is the overview from the Gammu documentation, 
+   how to specify the connection settings  for
+     I/O device: 
+     Connection: 
+     Model:
+ 
+   Note: The documentation uses the term "port", 
+         where we use the term "I/O device".
+   Note: You do not have to create/change the gammurc configuration file.
+         That will do KO/Pi for you.  
+   Note: For a known model, leave "Model:" always empty, 
+         such that Gammu can auto detect the model.
+
+# This is a sample ~/.gammurc file.
+# In Unix/Linux  copy it into your home directory and name it .gammurc
+#                or into /etc and name it gammurc
+# In Win32       copy it into directory with Gammu.exe and name gammurc
+# More about parameters later
+# -----------------------------------------------------------------------------
+
+[gammu]
+
+port = com8:
+#model = 6110
+connection = fbusblue
+#synchronizetime = yes
+#logfile = gammulog
+#logformat = textall
+#use_locking = yes
+#gammuloc = locfile
+#startinfo = yes
+#gammucoding = utf8
+
+[gammu1]
+
+port = com8:
+#model = 6110
+connection = fbusblue
+#synchronizetime = yes
+#logfile = gammulog
+#logformat = textall
+#use_locking = yes
+#gammuloc = locfile
+#startinfo = yes
+#gammucoding = utf8
+
+# -----------------------------------------------------------------------------
+# Now info about "Connection" parameter and connected with it port type
+# (more about port types later)
+# -----------------------------------------------------------------------------
+# "Connection" parameter | Port type | More details
+# -----------------------|-----------|-----------------------------------------
+# "fbus"                 | serial    | Nokia FBUS2
+# "fbusirda"/"infrared"  | serial    | Nokia FBUS2 over direct infrared device
+# "fbusdlr3"/"dlr3"      | serial    | Nokia FBUS2 with DLR3 cable
+# "fbusdku5"             | dku5      | Nokia FBUS2 with DKU5 cable. WIN32 ONLY
+# "fbuspl2303"           | usb       | Nokia FBUS2 with USB cable based on
+#                        |           | PL2303 chip.
+# "fbusblue"             | serial    | Nokia FBUS2 over Bluetooth serial device
+# "phonetblue"           | serial    | Nokia PHONET FBUS over Bluetooth serial
+#                        |           | device
+# "mrouterblue"          | serial    |
+# "mbus"                 | serial    | Nokia MBUS2
+# "at19200"/"at115200"/..| serial    | AT commands.8 bits, None parity, 1 stop
+#                        |           | bit, no flow control
+# -----------------------|-----------|-----------------------------------------
+# "irdaphonet"/"irda"    | irda      | Nokia PHONET FBUS over socket infrared
+# "irdaat"               | irda      | AT commands with socket infrared
+# "irdaobex"             | irda      | OBEX over socket infrared. MODEL "obex"
+# -----------------------|-----------|-----------------------------------------
+# "bluephonet"           | BT        | Nokia PHONET FBUS with Bluetooth stack
+# "bluefbus"/"dlr3blue"  | BT        | Nokia FBUS2 with Bluetooth stack
+# "blueat"/"atblue"      | BT        | AT commands with Bluetooth stack
+# "blueobex"             | BT        | OBEX with Bluetooth. MODEL "obex"
+#
+# Now more about port types and connected with it "Port" parameter
+# -----------------------------------------------------------------------------
+# Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix
+# ----------|---------------------------------|--------------------------------
+# serial    | "com*:"                         | "/dev/ttyS*"
+#           | (example "com1:")               | (example "/dev/ttyS1")
+#           |                                 | or "/dev/tts/**" (with DevFS)
+# ----------|---------------------------------|--------------------------------
+# irda      | ignored (can be empty)          | "/dev/ircomm*"
+# ----------|---------------------------------|--------------------------------
+# BT        |                 Bluetooth device address
+#           |                 (example "")
+# ----------|---------------------------------|--------------------------------
+# dku5      | ignored (can be empty)          | connection with it not possible
+# ----------|---------------------------------|--------------------------------
+# usb       | connection with it not possible | "/dev/ttyUSB*"
+#
+# Other config parameters
+# -----------------------------------------------------------------------------
+# Parameter name  | Description
+# ----------------|------------------------------------------------------------
+# Model           | use only, when Gammu doesn't recognize your phone model.
+#                 | Put it here. Example values: "6110", "6150", "6210", "8210"
+# SynchronizeTime | if you want to set time from computer to phone during
+#                 | starting connection. Do not rather use this option when
+#                 | when to reset phone during connection (in some phones need
+#                 | to set time again after restart)
+# GammuLoc        | name of localisation file
+# StartInfo       | this option allow to set, that you want (setting "yes")
+#                 | to see message on the phone screen or phone should enable
+#                 | light for a moment during starting connection. Phone
+#                 | WON'T beep during starting connection with this option.
+# GammuCoding     | forces using specified codepage (in win32 - for example
+#                 | "1250" will force CP1250) or UTF8 (in Linux - "utf8")
+# ----------------|------------------------------------------------------------
+# Logfile         | Use, when want to have logfile from communication.
+# Logformat       | What debug info and format should be used:
+#                 |   "nothing" - no debug level (default)
+#                 |   "text"    - transmission dump in text format
+#                 |   "textall" - all possible info in text format
+#                 |   "errors"  - errors in text format
+#                 |   "binary"  - transmission dump in binary format
+# ----------------|------------------------------------------------------------
+# Use_Locking     | under Unix/Linux use "yes", if want to lock used device
+#                 | to prevent using it by other applications. In win32 ignored
+
+   
+   
+   
+   
\ No newline at end of file