fixxx

5 files changed, 125 insertions, 22 deletions

diff --git a/bin/kdepim/kaddressbook/germantranslation.txt b/bin/kdepim/kaddressbook/germantranslation.txt
index f64bfda..4a5122f 100644
--- a/bin/kdepim/kaddressbook/germantranslation.txt
+++ b/bin/kdepim/kaddressbook/germantranslation.txt
@@ -725,69 +725,89 @@
 { "Remote IP address:","Ferne IP Adresse:" },

 { "Remote port number:","Ferne Port Nummer:" },

 { "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },

 { "Remote from: ","Fern von: " },

 { "Local from: ","Lokal von: " },

 { "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },

 { "Local calendar changed!\n","Lokaler Kalender geändert!\n" },

 { "Write back","Schreibe zurück" },

 { "Pi-Sync succesful!","Pi-Sync erfolgreich!" },

 { "Received sync request","Sync Anfrage erhalten" },

 { "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },

 { "Saving Data to temp file ...","Speichere Daten in temp Datei..." },

 { "Data saved to temp file!","Daten in temp Datei gespeichert!" },

 { "Sending file...","Sende Datei..." },

 { "Waiting for synced file...","Warte auf gesyncte Daten..." },

 { "Receiving synced file...","Gesyncte Daten erhalten..." },

 { "Received %1 bytes","%1 Bytes erhalten" },

 { "Writing file to disk...","Speichere Datei..." },

 { "Pi-Sync successful!","Pi-Sync erfolgreich!" },

 { "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },

 { "Synchronize!","Synchronisiere!" },

 { "High clock skew!","Großer Uhrzeitunterschied!" },

 { "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },

 { "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },

 { "Change search field enable jump bar","Ändere Suchfeld um Jumpbar anzuzeigen" },

 { "Search with '*' prefix (wildcard)","Suche mit '*' Prefix (Wildcard)" },

 { "Shrink searchfield in portrait view","Verkleinere Suchfeld im Portraitmodus" },

 { "Edit new contact","Bearbeite neuen Kontakt" },

 { "Edit ","Bearbeite " },

 { "No contact changed!","Kein Kontakt verändert" },

 { "%1 contacts changed!","%1 Kontakte geändert!" },

 { "Mobile (home)","Handy (Arbeit)" },

 { "Mobile (work)","Handy (Privat)" },

 { "Def.Formatted Name","Def. Format. Name" },

 { "Colors","Farben" },

 { "Alternating background of list views","Abwechselnder Hintergrund für Listen" },

 { "Backup enabled","Backup angeschaltet" },

 { "Use standard backup dir","Standard Backupverzeichnis" },

 { "Number of Backups:","Anzahl der Backups" },

 { "Make backup every ","Mache ein Backup alle " },

 { " days"," Tage" },

 { "Creating backup ... please wait ...","Erzeuge Backup ... bitte warten ..." },

 { "Backup Failed!","Backup Problem!" },

 { "Try again now","Versuche jetzt nochmal" },

 { "Try again later","Versuche später nochmal" },

 { "Try again tomorrow","Versuche morgen nochmal" },

 { "Disable backup","Schalte Backup ab" },

 { "<b>Backup directory does not exist: </b>","<b>Backup Verzeichnis existiert nicht: </b>" },

 { "<b>The backup copy command failed!</b>","<b>Das Backup Kopierkommando is fehlgeschlagen!</b>" },

 { "Choose action","Wähle Aktion" }, 

 { "&Configure KA/Pi...","Konfiguriere KA/Pi..." },

 { "Global Settings...","Globale Einstellungen..." },

 { "Spouse","Ehegatte" },

 { "Notes","Notizen" },

 { "Messanger","Messanger" },

 { "Assistant","Assistent" },

 { "Manager","Manager" },

 { "Secrecy","Sichtbar" },

 { "male","männlich" },

 { "female","weiblich" },

 { "Hide!","Verbergen!" },

 { "Show!","Anzeigen!" },

 { "Details","Details" },

 { "Search:","Suche:" },

+{ "Automatically sync with KDE-Desktop\nwhen receiving sync request","Synce automatisch mit KDE-Desktop\nwenn eine Sync-Anforderung kommt" },

+{ "Pi-Sync Port Error","Pi-Sync Port Fehler" },

+{ "<b>Enabling Pi-Sync failed!</b> Failed to bind or listen to the port %1! Is another instance already listening to that port?","<b>Anschalten von Pi-Sync fehlgeschlagen!</b> Fehler beim Ansprechen des Ports %1! Ist bereits eine andere Anwendung dabei diesen Port zu nutzen?" },

+{ "No valid port number:\n%1","Keine gültige Port Nummer:\n%1" },

+{ "Port number (Default: %1)\nValid range from 1 to 65535","Port Nummer (Standard: %1)\nGültiger Bereich von 1 bis 65535" },

+{ "Pi-Sync Error","Pi-Sync Fehler" },

+{ "Got send file request\nwith invalid password","Erhielt "sende Datei" Anfrage\nmit ungültigem Passwort" },

+{ "Got receive file request\nwith invalid password","Erhielt "empfange Datei" Anfrage\nmit ungültigem Passwort" },

+{ "Wrong password: Receiving remote file failed.","Falsches Passwort: Empfangen von entfernter Datei fehlgeschlagen." },

+{ "Please close error dialog on remote.","Bitte schließe Fehler-Dialog am entfernten Rechner" },

+{ "Unknown error on remote.","Unbekannter Fehler am entfernten Rechner" },

+{ "Pi-Sync: Connected!","Pi-Sync: Verbunden!" },

+{ "Receiving file from remote...","Empfange entfernte Datei..." },

+{ "Sending back synced file...","Sende synchronisierte Datei zurück..." },

+{ "Do you want to\nclear all sync info\nof all profiles?","Möchten Sie wirklich\ndie Sync-Info\nfür alle Profile\nlöschen?" },

+{ "Do you want to\nclear the sync\ninfo of profile\n%1?\n","Möchten Sie wirklich\ndie Sync-Info für Profil\n%1?\nlöschen" },

+{ "Sorry, no valid port.Syncing cancelled.","Sorry, kein gültiger Port. Syncing abgebrochen." },

+{ "Remote port number:\n(May be: 1 - 65535)","Ferne Port Nummer:\n(Darf sein: 1 - 65535)" },

+{ "Writing back file ...","Schreibe Datei zurück..." },

+{ "Sending back file ...","Sende Datei zurück..." },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },
\ No newline at end of file
diff --git a/bin/kdepim/korganizer/germantranslation.txt b/bin/kdepim/korganizer/germantranslation.txt
index 34e9b7f..ff5e095 100644
--- a/bin/kdepim/korganizer/germantranslation.txt
+++ b/bin/kdepim/korganizer/germantranslation.txt
@@ -896,129 +896,128 @@
 { "03.24.2004 (%m.%d.%Y|%A %B %d %Y)","03.24.2004 (%m.%d.%Y|%A %B %d %Y)" },
 { "2004-03-24 (%Y-%m-%d|%A %Y %B %d)","2004-03-24 (%Y-%m-%d|%A %Y %B %d)" },
 { "Mon 19.04.04: %a %d.%m.%y","Mon 19.04.04: %a %d.%m.%y" },
 { "Mon, 19.Apr.04: %a, %d.%b.%y","Mon, 19.Apr.04: %a, %d.%b.%y" },
 { "Add 30 min to selected Timezone","Addiere 30 min zur Zeitzone" },
 { "Used Mail Client","Benutzter Mail Client" },
 { "Channel:","Channel:" },
 { "Message:","Message:" },
 { "Parameters:","Parameter:" },
 { "HINT: Delimiter=; Name=%1,Email=%2","Hinweis: Begrenzer=; Name=%1,Email=%2" },
 { "extra Message:","extra Message:" },
 { "extra Parameters:","extra Parameter:" },
 { "HINT: Emails=%1,Attachments=%2","Hinweis: Emails=%1,Attachments=%2" },
 { "External Apps.","Externe Appl." },
 { "24 hours","24 Std." },
 { "3 hours","3 Std." },
 { "1 hour","1 Std." },
 { "15 minutes","15 Min." },
 { "5 minutes","5 Min." },
 { "1 minute","1 Min." },
 { "23","23" },
 { "Mon 15","Mon 15" },
 { "Configure KO","Konfiguriere KO" },
 { "Event text","Termin Text" },
 { "ToDo","Todo" },
 { "Today","Heute" },
 { "What's Next View","What's Next Ansicht" },
 { "Allday Agenda view shows todos","Ganztag Agenda zeigt Todos" },
 { "Alarm","Alarm" },
 { "Used %1 Client","Benutzter %1 Client" },
 { "No email client installed","Kein Email Klient installiert" },
 { "Userdefined email client","Benutzerdef. Email Klient" },
 { "OM/Pi email client","OM/Pi Email Klient" },
 { "Include in multiple ","Beziehe in multiple " },
 { "calendar  ","Kalender  " },
 { "addressbook  ","Adressbuch  " },
 { "pwmanager","PWmanager" },
 { " sync"," Sync ein" },
 { "Write back synced data","Schreibe gesyncte Daten zurück" },
 { "-- Write back (on remote) existing entries only","-- Schreibe nur existierende (entfernte) Einträge zurück" },
 { "-- Write back (calendar) entries in future only","-- Schreibe nur zukünftige Kalender-Einträge zurück" },
 { "---- Max. weeks in future: ","---- Max. wochen in der Zukunft: " },
 { "Pi-Sync ( direct Kx/Pi to Kx/Pi sync )","Pi-Sync ( direktes Kx/Pi zu Kx/Pi sync )" },
 { "Mobile device (cell phone)","Mobiles Gerät (Handy)" },
 { "Help...","Hilfe..." },
 { "Local file Cal:","Lokale Datei Kal:" },
 { "Local file ABook:","Lokale Datei ABuch:" },
 { "Local file PWMgr:","Lokale Datei PWMgr:" },
 { "Addressbook file (*.vcf) is used by KA/Pi","Adressbuch Datei (*.vcf) wird von KA/Pi genutzt" },
 { "Calendar:","Kalender:" },
 { "AddressBook:","AdressBuch:" },
 { "PWManager:","PWManager:" },
 { "Addressbook file is used by KA/Pi","Adressbuch Datei wird von KA/Pi genutzt" },
 { "ssh/scp","ssh/scp" },
 { "ftp","ftp" },
 { "Password for remote access: (could be the same for each)","Passwort für entfernten Zugriff: (kann dasselbe sein für alle)" },
 { "Remote IP address: (could be the same for each)","Entfernte IP Adresse: (kann dasselbe sein für alle)" },
 { "Remote port number: (should be different for each)","Entfernte Port Nummer: (Sollte für alle unterschiedlich sein)" },
 { "command for downloading remote file to local device","Kommando zum Download der entfernten Datei zum lokalen Gerät" },
 { "command for uploading local temp file to remote device","Kommando zum Upload der lokalen temp. Datei zum entfernten Gerät" },
 { "Insert device where\nphone is connected. E.g.:\n","Füge Device ein, an dem\ndas Handy angeschlossen ist. Z.B.:\n" },
 { "KDE-Pim sync config","KDE-Pim sync Konfig" },
 { "Insert kind of connection,e.g.:\n","Füge Art der Verbindung ein,z.B.:\n" },
 { "Recommended: Leave empty!\n(Such that model can\nbe auto detected)\nOr insert name of model:\n","Empfohlen: Leer lassen!\n(So dass das Model\nautomatisch erkannt\nwerden kann)\nOder füge Model Name ein:\n" },
-{ "Port number (Default: %1)","Port Nummer (Default: %1)" },
 { "Password to enable\naccess from remote:","Passwort um entfernten\nZugriff zuzulassen:" },
 { "Automatically start\nat application startup","Starte automatisch\nbeim Programmstart" },
 { "Automatically sync\nwith KDE-Desktop","Automatischer Sync\nmit dem KDE-Desktop" },
 { "Enter port for Pi-Sync","Port Nummer für Pi-Sync" },
 { "Disable Pi-Sync","Schalte Pi-Sync aus" },
 { "Do you really want\nto multiple sync\nwith all checked profiles?\nSyncing takes some\ntime - all profiles\nare synced twice!","Wollen Sie wirklich\nmit allen selektierten\nProfilen "Multi-Syncen"?\nDas Syncen dauert einige Zeit -\nalle Profile werden zweimal gesynct!" },
 { "KDE-Pim Sync","KDE-Pim Sync" },
 { "Multiple profiles","Multi-Sync Profile" },
 { "Device: ","Gerät: " },
 { "Multiple sync started.","Multi-Sync gestartet." },
 { "Nothing synced! No profiles defined for multisync!","Nichts gesynct! Keine Profile\nselektiert für Multi-Sync" },
 { "Turn filter on","Schalte Filter an" },
 { "Turn filter off","Schalte Filter aus" },
 { "Key bindings  KOrganizer/Pi","Tastatur Belegung KOrganizer/Pi" },
 { "<p><b>White</b>: Item readonly</p>\n","<p><b>Weiss</b>: Eintrag schreibgeschützt</p>\n" },
 { "<p><b>Dark yellow</b>:  Event/todo with attendees.</p>\n","<p><b>Dunkelgelb</b>:  Termin/Todo mit Teilnehmern.</p>\n" },
 { "<p><b>Black</b>: Event/todo with attendees. You are the organizer!</p>\n","<p><b>Schwarz</b>: Termin/Todo mit Teilnehmern. Sie sind der Organisator!</p>\n" },
 { "<p><b>Dark green</b>: Information(description) available.([i] in WN view)</p>\n","<p><b>Dunkelgrün</b>: Information(Beschreibung) verfügbar.([i] in WN Ansicht)</p>\n" },
 { "<p><b>Blue</b>: Recurrent event.([r] in Whats'Next view)</p>\n","<p><b>Blau</b>: Wiederholender Termin.([r] in Whats'Next Ansicht)</p>\n" },
 { "<p><b>Red</b>: Alarm set.([a] in Whats'Next view)</p>\n","<p><b>Rot</b>: Alarm gesetzt.([a] in Whats'Next Ansicht)</p>\n" },
 { "<p><b>Cross</b>: Item cancelled.([c] in Whats'Next view)</p>\n","<p><b>Kreuz</b>:  Eintrag gecancelt.([c] in Whats'Next Ansicht)</p>\n" },
 { "<p><b>(for square icons in agenda and month view)</b></p>\n","<p><b>(für quadratische Icons in Agenda und Monats Ansicht)</b></p>\n" },
 { "<p><h2>KO/Pi icon colors:</h2></p>\n","<p><h2>KO/Pi Icon Farben:</h2></p>\n" },
 { "<p><b>E</b>:  Edit item</p>\n","<p><b>E</b>:  Editiere Eintrag</p>\n" },
 { "<p><b>A</b>: Show agenda view.</p>\n","<p><b>A</b>: Zeige Agenda Ansicht.</p>\n" },
 { "<p><b>I,C</b>: Close dialog.</p>\n","<p><b>I,C</b>: Schließe Dialog.</p>\n" },
 { "<p><h3>In event/todo viewer:</h3></p>\n","<p><h3>In Termin/Todo Detail-Anzeige:</h3></p>\n" },
 { "<p><b>shift+up/down</b>: Goto first/last item</p>\n","<p><b>shift+up/down</b>: Gehe zum ersten/letzten Eintrag</p>\n" },
 { "<p><b>ctrl+up/down</b>:  Goto up/down by 20% of items</p>\n","<p><b>ctrl+up/down</b>:  Gehe hoch/runter 20% aller Einträge</p>\n" },
 { "<p><b>up/down</b>: Next/prev item</p>\n","<p><b>up/down</b>: Nächster/vorheriger Eintrag</p>\n" },
 { "<p><b>return+shift</b>: Deselect item+one step down</p>\n","<p><b>return+shift</b>: Deselektiere Item+Cursor einen Eintrag runter</p>\n" },
 { "<p><b>return</b>: Select item+one step down</p>\n","<p><b>return</b>: Selektiere Item+Cursor einen Eintrag runter</p>\n" },
 { "<p><b>I</b>: Show info of current item+one step down.</p>\n","<p><b>I</b>: Zeige Detail-Ansicht vom sel.Eintrag+Cursor einen Eintrag runter.</p>\n" },
 { "<p><h3>In list view:</h3></p>\n","<p><h3>In Listen Ansicht:</h3></p>\n" },
 { "<p><b>return+shift</b>:  Mark item as not completed+one step down</p>\n","<p><b>return+shift</b>:  Markiere Todo als nicht erledigt+Cursor einen Eintrag runter</p>\n" },
 { "<p><b>return</b>: Mark item as completed+one step down.</p>\n","<p><b>return</b>: Markiere Todo als erledigt+Cursor einen Eintrag runter.</p>\n" },
 { "<p><b>Q</b>: Toggle quick todo line edit.</p>\n","<p><b>Q</b>: Zeige/verstecke Quick Todo Eingabe Zeile.</p>\n" },
 { "<p><b>shift+P</b>: Make new <b>P</b>arent for todo selected with shift+S</p>\n","<p><b>shift+P</b>: Mache Todo zum neuen <b>P</b>arent Todo für das Todo, welches mit shift+Sselektiert wurde.</p>\n" },
 { "<p><b>shift+S</b>: Make <b>S</b>ubtodo (reparent todo)</p>\n","<p><b>shift+S</b>: Mache Todo zum <b>S</b>ubtodo</p>\n" },
 { "<p><b>shift+U</b>: <b>U</b>nparent todo (make root todo)</p>\n","<p><b>shift+U</b>: <b>U</b>nparent Todo (Mache Sub-Todo zum Toplevel Todo)</p>\n" },
 { "<p><h3>In todo view:</h3></p>\n","<p><h3>In Todo Anzige:</h3></p>\n" },
 { "<p><b>ctrl+up/down</b>: Scroll small todo view</p>\n","<p><b>ctrl+up/down</b>: Scrolle kleine Todo Ansicht</p>\n" },
 { "<p><b>up/down</b>: Scroll agenda view</p>\n","<p><b>up/down</b>: Scrolle Agenda Ansicht</p>\n" },
 { "<p><h3>In agenda view:</h3></p>\n","<p><h3>In Agenda Ansicht:</h3></p>\n" },
 { "<p><b>del,backspace</b>: Delete selected item</p>\n","<p><b>del,backspace</b>: Lösche selektiertes Item</p>\n" },
 { "<p><b>left</b>: Prev. week | <b>left+ctrl</b>: Prev. month</p>\n","<p><b>left</b>: Vorh. Woche | <b>left+ctrl</b>: Vorh. Monat</p>\n" },
 { "<p><b>right</b>: Next week | <b>right+ctrl</b>: Next month</p>\n","<p><b>right</b>: Nächste Woche | <b>right+ctrl</b>: Nächste Woche</p>\n" },
 { "<p><b>B</b>: Edit description (details) of selected item</p>\n","<p><b>B</b>: Editiere Beschreibung (Details) des selektierten Items</p>\n" },
 { "<p><b>C</b>: Show current time in agenda view</p>\n","<p><b>C</b>: Zeige aktuelle Zeit in Agenda Ansicht</p>\n" },
 { "<p><b>+,-</b> : Zoom in/out agenda | <b>A</b>: Toggle allday agenda height</p>\n","<p><b>+,-</b> : Zoom rein/raus Agenda | <b>A</b>: Wechsle Ganztag Agenda Höhe</p>\n" },
 { "<p><b>S+ctrl</b>: Add sub-todo | <b>X+ctrl</b>: Toggle datenavigator</p>\n","<p><b>S+ctrl</b>: Füge Sub-Todo hinzu | <b>X+ctrl</b>: Zeige/verstecke Datumsnavigator</p>\n" },
 { "<p><b>T</b>: Goto today | <b>T+ctrl</b>: New Todo</p>\n","<p><b>T</b>: Gehe zu Heute | <b>T+ctrl</b>: Neues Todo</p>\n" },
 { "<p><b>E</b>: Edit selected item |<b> E+ctrl</b>: New Event</p>\n","<p><b>E</b>: Editiere selektiertes Item |<b> E+ctrl</b>: Neuer Termin</p>\n" },
 { "<p><b>D</b>: One day view | <b>M</b>: Month view</p>\n","<p><b>D</b>: Ein-Tages Ansicht | <b>M</b>: Monatsansicht</p>\n" },
 { "<p><b>Z,Y</b>: Work week view | <b>U</b>: Week view</p>\n","<p><b>Z,Y</b>: Arbeitswochenansicht | <b>U</b>: Wochenansicht</p>\n" },
 { "<p><b>V</b>: Todo view | <b>L</b>: Event list view</p>\n","<p><b>V</b>: Todo Ansicht | <b>L</b>: Termin Listen Ansicht</p>\n" },
 { "<p><b>X</b>: Next X days view| <b>W</b>: What's next view\n ","<p><b>X</b>: Nächste-X-Tage Ansicht | <b>W</b>: What's Next Ansicht\n " },
 { "<p><b>1-0</b> (+<b>ctrl</b>): Select filter 1-10 (11-20)</p>\n","<p><b>1-0</b> (+<b>ctrl</b>): Selektiere Filter 1-10 (11-20)</p>\n" },
 { "<p><b>O</b>: Filter On/Off | <b>J</b>: Journal view</p>\n","<p><b>O</b>: Filter An/Aus | <b>J</b>: Journal Ansicht</p>\n" },
 { "<p><b>Space</b>: Toggle fullscreen | <b>P</b>: Date picker</p>\n","<p><b>Space</b>: Zeige fullscreen | <b>P</b>: Datums Picker</p>\n" },
 { "<p><b>I</b>: Show info for selected event/todo</p>\n","<p><b>I</b>: Zeige Info (Details) für selektiertes Item</p>\n" },
 { "<p><b>H</b>: This help dialog | <b>S</b>: Search dialog</p>\n","<p><b>H</b>: Dieser Hilfe Dialog | <b>S</b>: Such Dialog</p>\n" },
 { "<p><h2>KO/Pi key shortcuts:</h2></p>\n","<p><h2>KO/Pi Tastatur Kurzbefehle:</h2></p>\n" },
 { "After changing something, the data is\nautomatically saved to the file\n~/kdepim/apps/korganizer/mycalendar.ics\nafter (configurable) three minutes.\nFor safety reasons there is  one autosaving\nafter 10 minutes (of idle time) again. The \ndata is saved automatically when closing KO/Pi\nYou can create a backup file \nwith: File - Save Calendar Backup\n","Nachdem etwas geändert wurde, werden die\nDaten automatisch in die Datei abgespeichert\n~/kdepim/apps/korganizer/mycalendar.ics\nnach (konfigurierbar) drei Minuten.\nAus Sicherheitsgründen wird noch einmal\nnach 10 Min. abgespeichert, wenn keine\nÄnderungen vorgenommen wurden. Die \nDaten werden automatisch gespeichert,\nwenn KO/Pi beendet wird.\nSie können eine Backup-Datei erstellen im\nMenu: Datei - Speichere Kalender Backup\n" },
@@ -1445,73 +1444,92 @@
 { "Profession","Beruf" },
 { "Children","Kinder" },
 { "Department","Abteilung" },
 { "Backup cancelled","Backup abgebrochen" },
 { "Backup globally disabled","Backup global abgeschaltet" },
 { "Backup succesfully finished","Backup erfolgreich beendet" },
 { "(Hint: You can enable automatic backup in the global settings!)","(Hinweis: Sie können ein automatisches Backup in den globalen Einstellungen konfigurieren!)" },
 { "This will <b>backup all calendar files</b> to the directory %1 %2","Das schreibt ein <b>Backup aller Kalenderdateien</b> in das Verzeichnis %1 %2" },
 { "Birthdays","Geburtstage" },
 { "KO/Pi import information!","KO/Pi Import Information!" },
 { "Start this todo\nand stop all running","Starte dieses Todo\nund stoppe alle Laufenden" },
 { "Cancel - do not start"," Abbrechen - Todo nicht starten" }, 
 { "The timezone has changed!\nShould the calendar be reloaded\nto shift the time of the events?\nPlease read Menu: Help->FAQ:\n"How do I change the timezone?"\nas well!","Die Zeitzone wurde geändert!\nSollen die Kalender neu geladen\nwerden num die Zeiten\nder Termine zu ändern?\nBitte lesen Sie auch\nMenu: Help->FAQ:\n"How do I change the timezone?"" },
 { "Reload","Neu laden" },
 { "Timezone settings","Zeitzoneneinstellung" },
 { "Title: ","Titel: " },
 { "Journal from: ","Journal vom: " },
 { "Journal: %1 from ","Journal: %1 vom " },
 { "<b>Click here to edit categories: </b>","<b>Klicke hier um Kategorien zu ändern: </b>" },
 { "Selected Item","Ausgewähltes Item" },
 { "Select Date...","Wähle Datum..." },
 { "After importing/loading/syncing there may be new categories in events or todos which are not added automatically to the category list. Please choose what to do <b>now</b>:","Nach dem Importieren/Laden/Syncen kann es neue Kategorien in den Terminen oder Todos geben, die nicht automatisch der Kategorieliste hinzugefügt werden. Bitte wählen Sie, was <b>jetzt</b> passieren soll:" },
 { "Change category list now!","Ändere Kategorieliste jetzt!" },
 { "Edit category list...","Ändere Kategorieliste..." },
 { "Toolbar changes needs a restart!","Neustart benötigt für Toolbaränderungen!" },
 { "Filepath: ","Dateipfad: " },
 { "You can try to reload the calendar in the Resource View!","In der Resourcenansicht können Sie erneut versuchen den Kalender zu laden!" },
 { "<b>WARNING:</b> There is a pending suspended alarm!","<b>WARNUNG:</b> Es gibt einen laufenden Suspendalarm!" },
 { "Pending Suspend Alarm","Laufender Suspend Alarm" },
 { "Error loading calendar %1","Fehler beim Laden von Kalender %1" },
 { "Calendar(s) not loaded:","Nicht geladene(r) Kalender:" },
 { "Loding of calendar(s) failed","Laden von Kalendern fehlgeschlagen" },
 { "Alarm Options","Alarm Einstellungen" },
 { "Delete selected...","Lösche Ausgewählte..." },
 { "None","Nichts" },
 { "Selection","Auswahl" },
 { "Set categories","Setze Kategorien" },
 { "This adds the selected\nitems to the calendar\n%1\nand removes them from\ntheir current calendar!","Das fügt die ausgewählten\nEinträge dem Kalender\n%1\nhinzu und entfernt sie von\nihrem aktuellen Kalender!" },
 { "Reset","Neu setzen" },
 { "Do you want to <b>add</b> categories to the selected items or <b>reset</b> the list (i.e. remove current categories)?","Möchten Sie Kategorien zu den ausgewählten Einträgen <b>hinzufügen</b> oder die Liste <b>neu setzen</b> (d.h. vorhandene Kategorien löschen)?" },
 { "The file\n%1\ndoes not exist!\nShall I create it for you?","Die Datei\n%1\nexistiert nicht!\nSoll sie neu angelegt werden?" },
 { "Sorry, cannot create the file\n%1!\nNo calendar added!","Kann leider die Datei\n%1\nnicht anlegen!\nKein Kalender hinzugefügt!" },
 { "\nNO\n WRITEABLE\n   CALENDAR\n      FOUND!\n\nPlease fix your calendar settings!\n","\nKEIN\n  SCHREIBBARER\n    KALENDER\n      GEFUNDEN!\n\nBitte korrigieren Sie\nihre Kalendereinstellungen!\n" },
 { "\nThe file\n%1\non disk has changed!\nFile size: %2 bytes.\nLast modified: %3\nDo you want to:\n\n - Save and overwrite file?\n - Sync with file, then save?\n - Cancel without saving? \n","\nDie Datei\n%1\nwurde verändert!\nDatei Grösse: %2 Bytes.\nZuletzt geändert: %3\nMöchten Sie:\n\n - Speichern und die Datei überschreiben?\n - Mit Datei Synchronisieren, dann speichern?\n - Abbrechen ohne zu speichern? \n" },
 { "Edit","Edit" },
 { "Last Modified","Zuletzt geändert" },
 { "Journal viewer","Journal Anzeige" },
 { "Configure Calendar Files...","Konfiguriere Kalenderdateien..." },
 { "You can use and display <b>more than one</b> calendar file in KO/Pi. A calendar file is called a <b>resource</b>. To add a calendar or change calendar settings please use menu: <b>View -> Toggle Resource View</b>.","Sie können <b>mehr als eine</b> Kalenderdatei in KO/Pi darstellen und benutzen. Eine Kalenderdatei wird <b>Resource</b> genannt. Um einen Kalender hinzuzufügen oder die Kalendereinstellungen zu ändern benutzen Sie bitte das Menu: <b>Ansicht -> Resourcenansicht umschalten</b>." },
 { "Hide Completed","Verstecke erledigte Todos" },
 { "Show not Running","Zeige nicht Laufende" },
 { "Click to add new Todo","Klick für neues Todo!" },
 { "Show next conflict for","Zeige nächsten Konflikt für" },
 { "All events","Alle Termine" },
 { "Allday events","Ganztagestermine" },
 { "Events with time","Termine mit Zeit" },
 { "No conflict found","Kein Konflikt gefunden" },
 { "Conflict %1 <-> %2","Konflikt %1 <-> %2" },
 { "<p><b>Q</b>: Show next date with conflicting events\n ","<p><b>Q</b>: Zeige nächstes Datum mit Terminen im Konflikt\n " },
 { "Week view mode uses row layout","Wochenansicht Modus nutzt Reihenlayout" },
 { "The event\n%1\nconflicts with event\n%2\nat date\n%3.\n","Der Termin\n%1\nist im Konflikt mit Termin\n%2\nam Datum\n%3.\n" },
 { "KO/Pi Conflict delected","KO/Pi Konflikt erkannt" },
 { "Show date","Zeige Datum" },
 { "No problem!","Null Problemo!" },
-{ "","" },
+{ "Automatically sync with KDE-Desktop\nwhen receiving sync request","Synce automatisch mit KDE-Desktop\nwenn eine Sync-Anforderung kommt" },
+{ "Pi-Sync Port Error","Pi-Sync Port Fehler" },
+{ "<b>Enabling Pi-Sync failed!</b> Failed to bind or listen to the port %1! Is another instance already listening to that port?","<b>Anschalten von Pi-Sync fehlgeschlagen!</b> Fehler beim Ansprechen des Ports %1! Ist bereits eine andere Anwendung dabei diesen Port zu nutzen?" },
+{ "No valid port number:\n%1","Keine gültige Port Nummer:\n%1" },
+{ "Port number (Default: %1)\nValid range from 1 to 65535","Port Nummer (Standard: %1)\nGültiger Bereich von 1 bis 65535" },
+{ "Pi-Sync Error","Pi-Sync Fehler" },
+{ "Got send file request\nwith invalid password","Erhielt "sende Datei" Anfrage\nmit ungültigem Passwort" },
+{ "Got receive file request\nwith invalid password","Erhielt "empfange Datei" Anfrage\nmit ungültigem Passwort" },
+{ "Wrong password: Receiving remote file failed.","Falsches Passwort: Empfangen von entfernter Datei fehlgeschlagen." },
+{ "Please close error dialog on remote.","Bitte schließe Fehler-Dialog am entfernten Rechner" },
+{ "Unknown error on remote.","Unbekannter Fehler am entfernten Rechner" },
+{ "Pi-Sync: Connected!","Pi-Sync: Verbunden!" },
+{ "Receiving file from remote...","Empfange entfernte Datei..." },
+{ "Sending back synced file...","Sende synchronisierte Datei zurück..." },
+{ "Do you want to\nclear all sync info\nof all profiles?","Möchten Sie wirklich\ndie Sync-Info\nfür alle Profile\nlöschen?" },
+{ "Do you want to\nclear the sync\ninfo of profile\n%1?\n","Möchten Sie wirklich\ndie Sync-Info für Profil\n%1?\nlöschen" },
+{ "Sorry, no valid port.Syncing cancelled.","Sorry, kein gültiger Port. Syncing abgebrochen." },
+{ "Remote port number:\n(May be: 1 - 65535)","Ferne Port Nummer:\n(Darf sein: 1 - 65535)" },
+{ "Writing back file ...","Schreibe Datei zurück..." },
+{ "Sending back file ...","Sende Datei zurück..." },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
diff --git a/korganizer/calendarview.cpp b/korganizer/calendarview.cpp
index 68d1bc6..940ea91 100644
--- a/korganizer/calendarview.cpp
+++ b/korganizer/calendarview.cpp
@@ -387,129 +387,129 @@ void CalendarView::init()
 
     mStorage = new FileStorage( mCalendar );
     mNavigator = new DateNavigator( this, "datevav", mViewManager );
 
     QBoxLayout *topLayout = (QBoxLayout*)layout();
 #ifndef KORG_NOSPLITTER
     // create the main layout frames.
     mPanner = new QSplitter(QSplitter::Horizontal,this,"CalendarView::Panner");
     topLayout->addWidget(mPanner);
 
     mLeftSplitter = new QSplitter(QSplitter::Vertical,mPanner,
                                   "CalendarView::LeftFrame");
     mPanner->setResizeMode(mLeftSplitter,QSplitter::KeepSize);
 
     mDateNavigator = new DateNavigatorContainer( mLeftSplitter,
                                                "CalendarView::DateNavigator" );
 
     mLeftSplitter->setResizeMode(mDateNavigator,QSplitter::KeepSize);
     mTodoList = new KOTodoView(mCalendar, mLeftSplitter, "todolist_small2");
     mTodoList->setNavigator( mNavigator );
     mFilterView = new KOFilterView(&mFilters,mLeftSplitter,"CalendarView::FilterView");
 
 #ifdef KORG_NORESOURCEVIEW 
     mResourceView = 0;
 #else
     if ( mResourceManager ) {
         mResourceView = new ResourceView( mResourceManager, mLeftSplitter );
         mResourceView->updateView();
         connect( mResourceView, SIGNAL( resourcesChanged() ),
                  SLOT( updateView() ) );
     } else {
         mResourceView = 0;
     }
 #endif
     QWidget *rightBox = new QWidget( mPanner );
     QBoxLayout *rightLayout = new QVBoxLayout( rightBox );
 
     mRightFrame = new QWidgetStack( rightBox );
     rightLayout->addWidget( mRightFrame, 1 );
 
     mLeftFrame = mLeftSplitter;
 #else
     //QWidget *mainBox = new QWidget( this );
     //QWidget *leftFrame = new QWidget( mainBox );
     //QBoxLayout * mainBoxLayout;
     if ( KOPrefs::instance()->mVerticalScreen ) {
         //mainBoxLayout  = new QVBoxLayout(mainBox); 
         //leftFrameLayout = new QHBoxLayout(leftFrame ); 
         mMainFrame = new KDGanttMinimizeSplitter( Qt::Vertical, this );
         mMainFrame->setMinimizeDirection ( KDGanttMinimizeSplitter::Up );
         mLeftFrame = new KDGanttMinimizeSplitter( Qt::Horizontal, mMainFrame);;
         mLeftFrame->setMinimizeDirection ( KDGanttMinimizeSplitter::Right );
     } else {
         //mainBoxLayout  = new QHBoxLayout(mainBox);
         //leftFrameLayout = new  QVBoxLayout(leftFrame ); 
         mMainFrame = new KDGanttMinimizeSplitter( Qt::Horizontal, this);
         mMainFrame->setMinimizeDirection ( KDGanttMinimizeSplitter::Left);
         mLeftFrame = new KDGanttMinimizeSplitter( Qt::Vertical, mMainFrame);
         mLeftFrame->setMinimizeDirection ( KDGanttMinimizeSplitter::Up );
     }
     mMainFrame->setSizePolicy( QSizePolicy (QSizePolicy::Expanding,QSizePolicy::Expanding)   ); 
     //QBoxLayout * leftFrameLayout;
     topLayout->addWidget( mMainFrame );
 #ifdef DESKTOP_VERSION
-    mDateScrollBar = new QScrollBar ( 0, 364, 1,30, 200,QScrollBar::Horizontal, this );
+    mDateScrollBar = new QScrollBar ( 1, 365, 1,30, 200,QScrollBar::Horizontal, this );
     topLayout->addWidget( mDateScrollBar ); 
     connect( mDateScrollBar, SIGNAL( valueChanged ( int )  ),this, SLOT( scrollBarValue( int )) );
     if ( QApplication::desktop()->width() < 800 ) 
         mDateScrollBar->hide();
 #endif
     //mainBoxLayout->addWidget (mLeftFrame);  
     mDateNavigator = new DateNavigatorContainer( mLeftFrame,
                                                "CalendarView::DateNavigator" );
 #if 0
     // FIXME
     mDateNavigator = new KDateNavigator(mLeftFrame, mCalendar, TRUE,
                                         "CalendarView::DateNavigator", QDate::currentDate());
 #endif
     // mDateNavigator->blockSignals( true );
     //leftFrameLayout->addWidget( mDateNavigator  );
     mTodoList = new KOTodoView(mCalendar, mLeftFrame, "todolistsmall");
     mFilterView = new KOFilterView(&mFilters,mLeftFrame,"CalendarView::FilterView"); 
     mCalEditView = new KOCalEditView(mLeftFrame,"CalendarView::CaleditView");
     connect( mCalEditView, SIGNAL( calendarEnabled (int,bool) ),mCalendar, SLOT( setCalendarEnabled(int,bool)) );
     connect( mCalEditView, SIGNAL( alarmEnabled(int,bool) ),mCalendar, SLOT( setAlarmEnabled(int,bool)) );
     connect( mCalEditView, SIGNAL( calendarReadonly(int,bool) ),this, SLOT( setCalReadOnly(int,bool)) );
     connect( mCalEditView, SIGNAL( setCalendarDefault(int) ),mCalendar, SLOT( setDefaultCalendar(int)) );
     connect( mCalEditView, SIGNAL( setCalendarDefault(int) ),mViewManager, SLOT( setDefaultCalendar(int)) );
     connect( mCalEditView, SIGNAL( removeCalendar(int) ),mCalendar, SLOT( setCalendarRemove(int)) );
     connect( mCalEditView, SIGNAL( calendarAdded(int) ),this, SLOT( addCalendarId(int)) );
     connect( mCalEditView, SIGNAL( needsUpdate() ),this, SLOT( updateView()) );
     connect( mCalEditView, SIGNAL( checkCalendar() ),this, SLOT( checkFiles()  ));
     connect( mCalEditView, SIGNAL( needsUpdate() ),this, SLOT( updateUnmanagedViews()) );
    
     mTodoList->setNavigator( mNavigator );
 #if 0
     if (  QApplication::desktop()->width() < 480 ) {
         leftFrameLayout->addWidget(mFilterView);
         leftFrameLayout->addWidget(mTodoList, 2 );
       
     } else {
         leftFrameLayout->addWidget(mTodoList,2 );
         leftFrameLayout->addWidget(mFilterView );
     } 
 #endif
     mFilterView->hide();
     mCalEditView->hide();
     QWidget *rightBox = new QWidget( mMainFrame );
     //mainBoxLayout->addWidget ( rightBox, 10 );
     QBoxLayout *rightLayout = new QVBoxLayout( rightBox );
     mRightFrame = new QWidgetStack( rightBox );
     rightLayout->addWidget( mRightFrame, 10 );
 
     //mLeftFrame = (QWidget *)leftFrame;
     if ( KOPrefs::instance()->mVerticalScreen ) {
         //mDateNavigator->setFixedHeight( mDateNavigator->sizeHint().height() );
         //mDateNavigator->setMinimumWidth( mDateNavigator->sizeHint().width() );
         //mTodoList->setFixedHeight( mDateNavigator->sizeHint().height() );
         //leftFrame->setFixedHeight( mDateNavigator->sizeHint().height() );
     } else {
         //mDateNavigator->setFixedWidth( mDateNavigator->sizeHint().width() );
         //mTodoList->setFixedWidth( mDateNavigator->sizeHint().width() );
         //leftFrame->setFixedWidth( mDateNavigator->sizeHint().width() );
     }
     if ( !KOPrefs::instance()->mShowDateNavigator)
         mDateNavigator->hide();
     //qDebug("Calendarview Size %d %d ", width(), height());
 #endif
  
diff --git a/libkdepim/ksyncmanager.cpp b/libkdepim/ksyncmanager.cpp
index fc0ac6b..f2ee0ab 100644
--- a/libkdepim/ksyncmanager.cpp
+++ b/libkdepim/ksyncmanager.cpp
@@ -292,212 +292,217 @@ void KSyncManager::slotSyncMenu( int action )
                 {
                 case (KAPI):
                     if ( syncWithFile( temp->getRemoteFileNameAB( ), false ) )
                         mPrefs->mLastSyncedLocalFile = temp->getRemoteFileNameAB();
                     break;
                 case (KOPI):
                     if ( syncWithFile( temp->getRemoteFileName( ), false ) )
                         mPrefs->mLastSyncedLocalFile = temp->getRemoteFileName();
                     break;
                 case (PWMPI):
                     if ( syncWithFile( temp->getRemoteFileNamePWM( ), false ) )
                         mPrefs->mLastSyncedLocalFile = temp->getRemoteFileNamePWM();
                     break;
                 default:
                     qDebug("KSM::slotSyncMenu: invalid apptype selected");
                     break;
               
                 }
         } else {
             if (  temp->getIsPhoneSync() ) {
                 mPhoneDevice = temp->getPhoneDevice( ) ;
                 mPhoneConnection = temp->getPhoneConnection( );
                 mPhoneModel = temp->getPhoneModel( );
                 syncPhone();
             } else if (  temp->getIsPiSync() ) {
                 if ( mTargetApp == KAPI ) {
                     mPassWordPiSync = temp->getRemotePwAB();
                     mActiveSyncPort = temp->getRemotePortAB();
                     mActiveSyncIP = temp->getRemoteIPAB();
                 } else if ( mTargetApp == KOPI ) {
                     mPassWordPiSync = temp->getRemotePw();
                     mActiveSyncPort = temp->getRemotePort();
                     mActiveSyncIP = temp->getRemoteIP();
                 } else  {
                     mPassWordPiSync = temp->getRemotePwPWM();
                     mActiveSyncPort = temp->getRemotePortPWM();
                     mActiveSyncIP = temp->getRemoteIPPWM();
                 } 
                 syncPi();
                 while ( !mPisyncFinished ) {
                     //qDebug("waiting ");
                     qApp->processEvents();
                 }
             } else
                 syncRemote( temp );
 
         }
     }
     delete temp;
     setBlockSave(false);
 }
 
 void KSyncManager::enableQuick( bool ask )
 {
     bool autoStart;
     bool changed = false;
     if ( ask ) {
         QDialog dia ( 0, "input-dialog", true );
         QLineEdit lab ( &dia );
         QVBoxLayout lay( &dia );
         lab.setText( mPrefs->mPassiveSyncPort );
         lay.setMargin(7);
         lay.setSpacing(7);
         int po = 9197+mTargetApp;
-        QLabel label ( i18n("Port number (Default: %1)").arg(po), &dia );
+        QLabel label ( i18n("Port number (Default: %1)\nValid range from 1 to 65535").arg(po), &dia );
         lay.addWidget( &label);
         lay.addWidget( &lab);
 
         QLineEdit lepw ( &dia );
         lepw.setText( mPrefs->mPassiveSyncPw );
         QLabel label2 ( i18n("Password to enable\naccess from remote:"), &dia );
         lay.addWidget( &label2);
         lay.addWidget( &lepw);
         QCheckBox autostart(i18n("Automatically start\nat application startup"), &dia );
         lay.addWidget( &autostart);
         autostart.setChecked( mPrefs->mPassiveSyncAutoStart );
 #ifdef DESKTOP_VERSION
 #ifdef _WIN32_
         QCheckBox syncdesktop( i18n("Automatically sync with Outlook\nwhen receiving sync request"),&dia );
         syncdesktop.hide();// not implemented!
 #else
         QCheckBox syncdesktop( i18n("Automatically sync with KDE-Desktop\nwhen receiving sync request"),&dia );
 #endif
         lay.addWidget( &syncdesktop);
 #else
         mPrefs->mPassiveSyncWithDesktop = false;
         QCheckBox syncdesktop( i18n("Automatically sync\nwith KDE-Desktop"),&dia );
         syncdesktop.hide();
 #endif
         syncdesktop.setChecked( mPrefs->mPassiveSyncWithDesktop );
 
         QPushButton pb ( "OK",  &dia);
         lay.addWidget( &pb );
         connect(&pb, SIGNAL( clicked() ), &dia, SLOT ( accept() ) );
         dia.resize( 230,120 );
         dia.setCaption( i18n("Enter port for Pi-Sync") );
         dia.show();
 #ifndef DESKTOP_VERSION
         int dw = QApplication::desktop()->width();
         int dh = QApplication::desktop()->height();
         dia.move( (dw-dia.width())/2, (dh - dia.height() )/2 );
 #endif
         if ( ! dia.exec() )
             return;
         dia.hide();
         qApp->processEvents();
         if ( mPrefs->mPassiveSyncPw != lepw.text() ) {
             changed = true;
             mPrefs->mPassiveSyncPw = lepw.text();
         }
         if ( mPrefs->mPassiveSyncPort != lab.text() ) {
             mPrefs->mPassiveSyncPort = lab.text();
             changed = true;
         }
         autoStart = autostart.isChecked();
         if (mPrefs->mPassiveSyncWithDesktop != syncdesktop.isChecked() ) {
             changed = true;
             mPrefs->mPassiveSyncWithDesktop = syncdesktop.isChecked();
         }
     }
     else
         autoStart = mPrefs->mPassiveSyncAutoStart;
     if ( autoStart != mPrefs->mPassiveSyncAutoStart )
         changed =  true;
     bool ok;
     mPrefs->mPassiveSyncAutoStart = false;
-    Q_UINT16 port = mPrefs->mPassiveSyncPort.toUInt(&ok);
-    if ( ! ok ) {
-        KMessageBox::information( 0, i18n("No valid port"));
+    Q_UINT32 port_t = mPrefs->mPassiveSyncPort.toUInt(&ok);
+    qDebug("%d ", port_t);
+    if ( ! ok || port_t > 65535 ) {
+        KMessageBox::information( 0, i18n("No valid port number:\n%1").arg ( mPrefs->mPassiveSyncPort ), i18n("Pi-Sync Port Error"));
         return;
     }
+    Q_UINT16 port = port_t;
     //qDebug("port %d ", port);
     mServerSocket = new KServerSocket ( mPrefs->mPassiveSyncPw, port ,1 );
     mServerSocket->setFileName( defaultFileName() );//bbb
     if ( !mServerSocket->ok() ) {
-        KMessageBox::information( 0, i18n("Failed to bind or\nlisten to the port!"));
+        QTimer::singleShot( 2000, this, SLOT ( displayErrorPort() ) );
         delete mServerSocket;
         mServerSocket = 0;
         return;
     }
     mPrefs->mPassiveSyncAutoStart = autoStart;
     if ( changed ) {
         mPrefs->writeConfig();
     }
     connect( mServerSocket, SIGNAL ( request_file() ),this, SIGNAL  ( request_file() ) );
     connect( mServerSocket, SIGNAL ( file_received( bool ) ), this,  SIGNAL  ( getFile( bool ) ) );
 }
-
+void KSyncManager::displayErrorPort()
+{
+    KMessageBox::information( 0, i18n("<b>Enabling Pi-Sync failed!</b> Failed to bind or listen to the port %1! Is another instance already listening to that port?").arg( mPrefs->mPassiveSyncPort) , i18n("Pi-Sync Port Error"));
+}
 void KSyncManager::syncLocalFile()
 {
 
     QString fn =mPrefs->mLastSyncedLocalFile;
     QString ext;
 
     switch(mTargetApp)
         {
             case (KAPI):
             ext = "(*.vcf)";
             break;
             case (KOPI):
             ext = "(*.ics/*.vcs)";
             break;
             case (PWMPI):
             ext = "(*.pwm)";
             break;
             default:
             qDebug("KSM::syncLocalFile: invalid apptype selected");
             break;
               
         }
 
     fn =KFileDialog:: getOpenFileName( fn, i18n("Sync filename"+ext), mParent );
     if ( fn == "" )
         return;
     if (  syncWithFile(  fn, false ) ) {
         qDebug("KSM::syncLocalFile() successful ");
     }
 
 }
 
 bool  KSyncManager::syncWithFile( QString fn , bool quick )
 {
     bool ret = false;
     QFileInfo info;
     info.setFile( fn );
     QString mess;
     if ( !info. exists() ) {
         mess =  i18n( "Sync file \n...%1\ndoes not exist!\nNothing synced!\n").arg(fn.right( 30) );
         QMessageBox::warning( mParent, i18n("Warning!"),
                                            mess );
         return ret;
     }
     int result = 0;
     if ( !quick ) {
         mess =  i18n("Sync with file \n...%1\nfrom:\n%2\n").arg(fn.right( 25)).arg(KGlobal::locale()->formatDateTime(info.lastModified (), true, false ));
         result = QMessageBox::warning( mParent, i18n("Warning!"),
                                        mess,
                                        i18n("Sync"), i18n("Cancel"), 0,
                                        0, 1 );
         if ( result )
             return false;
     }
     if ( mAskForPreferences )
         if ( !edit_sync_options()) {
             mParent->topLevelWidget()->setCaption( i18n("Syncing aborted. Nothing synced.") );
             return false;
         }
     if ( result == 0 ) {
         //qDebug("Now sycing ... ");
         if ( ret = mImplementation->sync( this, fn, mSyncAlgoPrefs ) )
             mParent->topLevelWidget()->setCaption( i18n("Synchronization successful") );
         else
@@ -735,129 +740,129 @@ void KSyncManager::syncRemote( KSyncProfile* prof,  bool ask)
     }
     int maxlen = 30;
     if ( QApplication::desktop()->width() > 320 )
         maxlen += 25;
     mParent->topLevelWidget()->setCaption ( i18n( "Copy remote file to local machine..." ) );
     int fileSize = 0;
     int result = system ( preCommand );
     // 0 : okay
     // 256: no such file or dir
     //
     qDebug("KSM::Sync: Remote copy result(0 = okay): %d ",result );
     if ( result != 0 ) {
         unsigned int len = maxlen;
         while ( len <  preCommand.length() ) {
             preCommand.insert( len , "\n" );
             len += maxlen +2;
         }
         question = i18n("Sorry, the copy command failed!\nCommand was:\n%1\n \nTry command on console to get more\ndetailed info about the reason.\n").arg (preCommand) ;
         QMessageBox::information( mParent, i18n("Sync - ERROR"),
                                   question,
                                   i18n("Okay!")) ;
         mParent->topLevelWidget()->setCaption ("KDE-Pim");
         return;
     }
     mParent->topLevelWidget()->setCaption ( i18n( "Copying succeed." ) );
     //qDebug(" file **%s** ",prof->getLocalTempFile().latin1() );
 
     if ( syncWithFile( localTempFile, true ) ) {
 
         if ( mWriteBackFile ) {
             int fi;
             if ( (fi = postCommand.find("$PWD$")) > 0 ) {
                 QString pwd = getPassword();
                 postCommand = postCommand.left( fi )+ pwd + postCommand.mid( fi+5 );
                 
             }
             mParent->topLevelWidget()->setCaption ( i18n( "Writing back file ..." ) );
             result = system ( postCommand );
             qDebug("KSM::Sync:Writing back file result: %d ", result);
             if ( result != 0 ) {
                 mParent->topLevelWidget()->setCaption ( i18n( "Writing back file result: " )+QString::number( result ) );
                 return;
             } else {
                 mParent->topLevelWidget()->setCaption ( i18n( "Syncronization sucessfully completed" ) );
             }
         }
     }
     return;
 }
 bool KSyncManager::edit_pisync_options()
 {
     QDialog dia( mParent, "dia", true );
     dia.setCaption( i18n("Pi-Sync options for device: " ) +mCurrentSyncDevice );
     QVBoxLayout lay ( &dia );
     lay.setSpacing( 5 );
     lay.setMargin( 3 );
     QLabel lab1 ( i18n("Password for remote access:"), &dia); 
     lay.addWidget( &lab1 );
     QLineEdit le1 (&dia );
     lay.addWidget( &le1 );
     QLabel lab2 ( i18n("Remote IP address:"), &dia);
     lay.addWidget( &lab2 );
     QLineEdit le2 (&dia );
     lay.addWidget( &le2 );
-    QLabel lab3 ( i18n("Remote port number:"), &dia);
+    QLabel lab3 ( i18n("Remote port number:\n(May be: 1 - 65535)"), &dia);
     lay.addWidget( &lab3 );
     QLineEdit le3 (&dia );
     lay.addWidget( &le3 );
     QPushButton pb ( "OK",  &dia); 
     lay.addWidget( &pb );
     connect(&pb, SIGNAL( clicked() ), &dia, SLOT ( accept() ) ); 
     le1.setText( mPassWordPiSync );
     le2.setText( mActiveSyncIP  );
     le3.setText( mActiveSyncPort );
     if ( dia.exec() ) {
         mPassWordPiSync = le1.text();
         mActiveSyncPort = le3.text();
         mActiveSyncIP = le2.text();
         return true;
     }
     return false;
 }
 bool KSyncManager::edit_sync_options()
 {
 
     QDialog dia( mParent, "dia", true );
     dia.setCaption( i18n("Device: " ) +mCurrentSyncDevice );
     QButtonGroup gr ( 1,  Qt::Horizontal, i18n("Sync preferences"), &dia);
     QVBoxLayout lay ( &dia );
     lay.setSpacing( 2 );
     lay.setMargin( 3 );
     lay.addWidget(&gr);
     QRadioButton loc ( i18n("Take local entry on conflict"), &gr );
     QRadioButton rem ( i18n("Take remote entry on conflict"), &gr );
     QRadioButton newest( i18n("Take newest entry on conflict"), &gr );
     QRadioButton ask( i18n("Ask for every entry on conflict"), &gr );
     QRadioButton f_loc( i18n("Force: Take local entry always"), &gr );
     QRadioButton f_rem( i18n("Force: Take remote entry always"), &gr );
     //QRadioButton both( i18n("Take both on conflict"), &gr );
     QPushButton pb ( "OK",  &dia); 
     lay.addWidget( &pb );
     connect(&pb, SIGNAL( clicked() ), &dia, SLOT ( accept() ) ); 
     switch ( mSyncAlgoPrefs ) {
     case 0:
         loc.setChecked( true);
         break;
     case 1:
         rem.setChecked( true );
         break;
     case 2:
         newest.setChecked( true);
         break;
     case 3:
         ask.setChecked( true);
         break;
     case 4:
         f_loc.setChecked( true);
         break;
     case 5:
         f_rem.setChecked( true);
         break;
     case 6:
         // both.setChecked( true);
         break; 
     default:
         break;
     }
     if ( dia.exec() ) {
         mSyncAlgoPrefs = rem.isChecked()*1+newest.isChecked()*2+  ask.isChecked()*3+  f_loc.isChecked()*4+  f_rem.isChecked()*5;//+  both.isChecked()*6 ;
@@ -1127,237 +1132,239 @@ void KSyncManager::syncPi()
     commandSocket->readFile(  syncFileName() );
 }
 
 void KSyncManager::deleteCommandSocket(KCommandSocket*s, int state)
 {
     //enum { success, errorW, errorR, quiet };
 
 
 
     if ( state == KCommandSocket::errorR ||state == KCommandSocket::errorTO ||state == KCommandSocket::errorPW ||
          state == KCommandSocket::errorCA ||state == KCommandSocket::errorFI ||state == KCommandSocket::errorUN||state == KCommandSocket::errorED ) {
         if ( state == KCommandSocket::errorPW )
             mParent->topLevelWidget()->setCaption( i18n("Wrong password: Receiving remote file failed.") );
         else if ( state == KCommandSocket::errorR ||state == KCommandSocket::errorTO )
             mParent->topLevelWidget()->setCaption( i18n("ERROR: Receiving remote file failed.") );
         else if ( state == KCommandSocket::errorCA )
             mParent->topLevelWidget()->setCaption( i18n("Sync cancelled from remote.") );
         else if ( state == KCommandSocket::errorFI )
             mParent->topLevelWidget()->setCaption( i18n("File error on remote.") );
         else if ( state == KCommandSocket::errorED )
             mParent->topLevelWidget()->setCaption( i18n("Please close error dialog on remote.") );
         else if ( state == KCommandSocket::errorUN )
             mParent->topLevelWidget()->setCaption( i18n("Unknown error on remote.") );
         delete s;
         if ( state == KCommandSocket::errorR ) {
             KCommandSocket* commandSocket = new KCommandSocket( mPassWordPiSync, mActiveSyncPort.toUInt(), mActiveSyncIP, this, mParent->topLevelWidget());
             connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int)), this, SLOT(deleteCommandSocket(KCommandSocket*, int )) );
             commandSocket->sendStop();
         }
         mPisyncFinished = true;
         return;
         
     } else  if ( state == KCommandSocket::errorW ) {
         mParent->topLevelWidget()->setCaption( i18n("ERROR:Writing back file failed.") );
         mPisyncFinished = true;
 
     } else  if ( state == KCommandSocket::successR ) {
         QTimer::singleShot( 1, this , SLOT ( readFileFromSocket()));
 
     } else  if ( state == KCommandSocket::successW ) {
         mParent->topLevelWidget()->setCaption( i18n("Pi-Sync successful!") );
         mPisyncFinished = true;
     } else  if ( state == KCommandSocket::quiet ){
         qDebug("KSS: quiet ");
         mPisyncFinished = true;
     } else {
         qDebug("KSS: Error: unknown state: %d ", state);
         mPisyncFinished = true;
     }
 
     delete s;
 }
 
 void KSyncManager::readFileFromSocket()
 {
     QString fileName = syncFileName();
     bool syncOK = true;
     mParent->topLevelWidget()->setCaption( i18n("Remote file saved to temp file.") );
     if ( ! syncWithFile( fileName , true ) ) {
         mParent->topLevelWidget()->setCaption( i18n("Syncing failed.") );
         syncOK = false;
     }
     KCommandSocket* commandSocket = new KCommandSocket( mPassWordPiSync, mActiveSyncPort.toUInt(), mActiveSyncIP, this, mParent->topLevelWidget() );
     connect( commandSocket, SIGNAL(commandFinished( KCommandSocket*, int)), this, SLOT(deleteCommandSocket(KCommandSocket*, int )) );
-    if ( mWriteBackFile && syncOK  ) 
+    if ( mWriteBackFile && syncOK  ) {
+        mParent->topLevelWidget()->setCaption( i18n("Sending back file ...") );
         commandSocket->writeFile(  fileName );
+    }
     else {
         commandSocket->sendStop();
         if ( syncOK ) 
             mParent->topLevelWidget()->setCaption( i18n("Pi-Sync succesful!") );
         mPisyncFinished = true;
     }
 }
 
 KServerSocket:: KServerSocket ( QString pw, Q_UINT16 port, int backlog, QObject * parent, const char * name ) : QServerSocket( port, backlog, parent, name )
 {
     mPassWord = pw;
     mSocket = 0;
     mSyncActionDialog = 0;
     blockRC = false;
     mErrorMessage = 0;
 }
 
 void KServerSocket::newConnection ( int socket ) 
 {
     // qDebug("KServerSocket:New connection %d ", socket); 
     if ( mSocket ) {
         qDebug("KSS::newConnection Socket deleted! ");
         delete mSocket;
         mSocket = 0;
     }
     mSocket = new QSocket( this );
     connect( mSocket , SIGNAL(readyRead()), this, SLOT(readClient()) );
     connect( mSocket , SIGNAL(delayedCloseFinished()), this, SLOT(discardClient()) );
     mSocket->setSocket( socket );
 }
 
 void KServerSocket::discardClient()
 {
     QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
 }
 void KServerSocket::deleteSocket()
 {
     qDebug("KSS::deleteSocket");
     if ( mSocket ) {
         delete mSocket;
         mSocket = 0;
     }
     if ( mErrorMessage )
         QTimer::singleShot( 10, this , SLOT ( displayErrorMessage()));
 }
 void KServerSocket::readClient()
 {
     if ( blockRC )
         return;
     if ( mSocket == 0 ) {
         qDebug("ERROR::KSS::readClient(): mSocket == 0  ");
         return;
     }
     if ( mErrorMessage ) {
         mErrorMessage = 999;
         error_connect("ERROR_ED\r\n\r\n");
         return;
     }
     mErrorMessage = 0;
     //qDebug("KServerSocket::readClient()");
     if ( mSocket->canReadLine() ) {
         QString line = mSocket->readLine();
         //qDebug("KServerSocket readline: %s ", line.latin1());
         QStringList tokens = QStringList::split( QRegExp("[ \r\n][ \r\n]*"), line );
         if ( tokens[0] == "GET" ) {
             if (  tokens[1] == mPassWord ) {
                 //emit sendFile( mSocket );
                 bool ok = false;
                 QDateTime dt = KGlobal::locale()->readDateTime( tokens[2], KLocale::ISODate, &ok);
                 if ( ok ) {
                     KSyncManager::mRequestedSyncEvent = dt; 
                 }
                 else
                     KSyncManager::mRequestedSyncEvent = QDateTime();
                 send_file();
             }
             else {
                 mErrorMessage = 1;
                 error_connect("ERROR_PW\r\n\r\n");
             }
         } 
         if ( tokens[0] == "PUT" ) {
             if (  tokens[1] == mPassWord ) {
                 //emit getFile( mSocket );
                 blockRC = true;
                 get_file();
             }
             else {
                 mErrorMessage = 2;
                 error_connect("ERROR_PW\r\n\r\n");
                 end_connect();
             }
         } 
         if ( tokens[0] == "STOP" ) {
             //emit endConnect();
             end_connect();
         }
     }
 }
 void KServerSocket::displayErrorMessage()
 {
     if ( mErrorMessage == 1 ) {
-        KMessageBox::error( 0, i18n("Got send file request\nwith invalid password"));
+        KMessageBox::error( 0, i18n("Got send file request\nwith invalid password"), i18n("Pi-Sync Error"));
         mErrorMessage = 0;
     }
     else if ( mErrorMessage == 2 ) {
-        KMessageBox::error( 0, i18n("Got receive file request\nwith invalid password"));
+        KMessageBox::error( 0, i18n("Got receive file request\nwith invalid password"), i18n("Pi-Sync Error"));
         mErrorMessage = 0;
     }
 }
 void KServerSocket::error_connect( QString errmess )
 {
     QTextStream os( mSocket );
     os.setEncoding( QTextStream::Latin1 );
     os << errmess ;
     mSocket->close();
     if ( mSocket->state() == QSocket::Idle ) {
         QTimer::singleShot( 0, this , SLOT ( discardClient()));
     }
 }
 void KServerSocket::end_connect()
 {
     delete mSyncActionDialog;
     mSyncActionDialog = 0;
 }
 void KServerSocket::send_file()
 {
     //qDebug("MainWindow::sendFile(QSocket* s) ");
     if ( mSyncActionDialog )
         delete mSyncActionDialog;
     mSyncActionDialog = new QDialog ( 0, "input-dialog", true );
     mSyncActionDialog->setCaption(i18n("Received sync request"));
     QLabel* label = new QLabel( i18n("Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog."), mSyncActionDialog ); 
     label->setAlignment ( Qt::AlignHCenter );
     QVBoxLayout* lay = new QVBoxLayout( mSyncActionDialog );
     lay->addWidget( label);
     lay->setMargin(7);
     lay->setSpacing(7);
     if ( KSyncManager::mRequestedSyncEvent.isValid() ) {
         int secs = QDateTime::currentDateTime().secsTo( KSyncManager::mRequestedSyncEvent );
         //secs = 333;
         if ( secs < 0 )
              secs = secs * (-1);
         if ( secs > 30 ) 
             //if ( true ) 
             {
                 QString warning = i18n("Clock skew of\nsyncing devices\nis %1 seconds!").arg( secs );
                 QLabel* label = new QLabel( warning, mSyncActionDialog ); 
                 label->setAlignment ( Qt::AlignHCenter );
                 lay->addWidget( label);
                 if ( secs > 180 )
                     {
                         if ( secs > 300 ) {
                             if ( KMessageBox::Cancel == KMessageBox::warningContinueCancel(0, i18n("The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!"), i18n("High clock skew!"),i18n("Synchronize!"))) {
                                 qDebug("KSS::Sync cancelled ,cs"); 
                                 mErrorMessage = 0;
                                 end_connect();
                                 error_connect("ERROR_CA\r\n\r\n");
                                 return ;
                             }
                         }
                         QFont f = label->font();
                         f.setPointSize ( f.pointSize() *2 );
                         f. setBold (true ); 
                         QLabel* label = new QLabel( warning, mSyncActionDialog );
                         label->setFont( f ); 
                         warning = i18n("ADJUST\nYOUR\nCLOCKS!");
                         label->setText( warning ); 
                         label->setAlignment ( Qt::AlignHCenter );
                         lay->addWidget( label);
                         mSyncActionDialog->setFixedSize( 230, 300);
@@ -1405,251 +1412,303 @@ void KServerSocket::get_file()
     piTime.start();
     piFileString = "";
     QTimer::singleShot( 1, this , SLOT (readBackFileFromSocket( ) ));
 }
 
 
 void KServerSocket::readBackFileFromSocket()
 {
     //qDebug("readBackFileFromSocket() %d ", piTime.elapsed ());
     while ( mSocket->canReadLine ()  ) {
         piTime.restart();
         QString line = mSocket->readLine ();
         piFileString += line;
         //qDebug("readline: %s ", line.latin1());
         mSyncActionDialog->setCaption( i18n("Received %1 bytes").arg( piFileString.length()  ) );
 
     }
     if ( piTime.elapsed () < 3000 ) {
         // wait for more 
         //qDebug("waitformore ");
         QTimer::singleShot( 100, this , SLOT (readBackFileFromSocket( ) ));
         return;
     }
     QString fileName = mFileName;
     QFile file ( fileName );
     if (!file.open( IO_WriteOnly ) ) {
         delete mSyncActionDialog;
         mSyncActionDialog = 0;
         qDebug("KSS:Error open read back file ");
         piFileString = "";
         emit file_received( false );
         blockRC = false;
         return ;
                     
     } 
 
     // mView->setLoadedFileVersion(QDateTime::currentDateTime().addSecs( -1));
     QTextStream ts ( &file );
     ts.setEncoding( QTextStream::Latin1 );
     mSyncActionDialog->setCaption( i18n("Writing file to disk...") );
     ts << piFileString;
     mSocket->close();
     if ( mSocket->state() == QSocket::Idle )
         QTimer::singleShot( 10, this , SLOT ( discardClient()));
     file.close(); 
     piFileString = "";
     emit file_received( true );
     delete mSyncActionDialog;
     mSyncActionDialog = 0;
     blockRC = false;
 
 }
 
 KCommandSocket::KCommandSocket (  QString password, Q_UINT16 port, QString host, QObject * parent, QWidget * cap,  const char * name ): QObject( parent, name )
 {
     mPassWord = password;
     mSocket = 0;
     mFirst = false;
     mFirstLine = true;
     mPort = port;
     mHost = host;
     tlw = cap;
     mRetVal = quiet;
     mTimerSocket = new QTimer ( this );
-    connect( mTimerSocket, SIGNAL ( timeout () ), this, SLOT ( deleteSocket()  ) );
+    connect( mTimerSocket, SIGNAL ( timeout () ), this, SLOT ( updateConnectDialog() ) );
+    mConnectProgress.setCaption( i18n("Pi-Sync") );
+    connect( &mConnectProgress, SIGNAL ( cancelled () ), this, SLOT ( deleteSocket() ) );
+    mConnectCount = -1;
 }
 void KCommandSocket::sendFileRequest()
 {
     if ( tlw )
         tlw->setCaption( i18n("Connected! Sending request for remote file ...") );
-    mTimerSocket->start( 300000 );
+    mConnectProgress.hide();
+    mConnectCount = 300;mConnectMax = 300;
+    mConnectProgress.setCaption( i18n("Pi-Sync: Connected!") );
+    mTimerSocket->start( 100, true );
     QTextStream os( mSocket );
     os.setEncoding( QTextStream::Latin1 );
 
     QString curDt = " " +KGlobal::locale()->formatDateTime(QDateTime::currentDateTime().addSecs(-1),true, true,KLocale::ISODate );
     os << "GET " << mPassWord << curDt <<"\r\n\r\n";
 }
 
 void KCommandSocket::readFile( QString fn )
 {
     if ( !mSocket ) {
         mSocket = new QSocket( this );
         connect( mSocket, SIGNAL(readyRead()), this, SLOT(startReadFileFromSocket()) );
         connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
         connect( mSocket, SIGNAL(connected ()), this, SLOT(sendFileRequest() ));
     }
     mFileString = "";
     mFileName = fn;
     mFirst = true;
     if ( tlw )
         tlw->setCaption( i18n("Trying to connect to remote...") );
-    mTimerSocket->start( 20000 );
+    mConnectCount = 30;mConnectMax = 30;
+    mTimerSocket->start( 1000, true );
     mSocket->connectToHost( mHost, mPort ); 
     qDebug("KSS: Waiting for connection");
 }
-
+void KCommandSocket::updateConnectDialog()
+{
+    
+    if ( mConnectCount == mConnectMax  ) {
+        //qDebug("MAXX %d", mConnectMax);
+        mConnectProgress.setTotalSteps ( 30 );
+        mConnectProgress.show();
+        mConnectProgress.setLabelText( i18n("Trying to connect to remote...") );
+    }
+    //qDebug("updateConnectDialog() %d", mConnectCount);
+    mConnectProgress.raise();
+    mConnectProgress.setProgress( (mConnectMax - mConnectCount)%30 );
+    --mConnectCount;
+    if ( mConnectCount > 0 )
+        mTimerSocket->start( 1000, true );
+    else
+        deleteSocket(); 
+    
+}
 void KCommandSocket::writeFile( QString fileName  )
 {
     if ( !mSocket ) {
         mSocket = new QSocket( this );
         connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
         connect( mSocket, SIGNAL(connected ()), this, SLOT(writeFileToSocket()) );
     }
     mFileName = fileName ;
-    mTimerSocket->start( 20000 );
+    mConnectCount = 30;mConnectMax = 30;
+    mTimerSocket->start( 1000, true );
     mSocket->connectToHost( mHost, mPort ); 
 }
 void KCommandSocket::writeFileToSocket()
 {
     mTimerSocket->stop();
     QFile file2( mFileName );
     if (!file2.open( IO_ReadOnly ) ) {
+        mConnectProgress.hide();
+        mConnectCount = -1;
         mRetVal= errorW;
         mSocket->close();
         if ( mSocket->state() == QSocket::Idle )
             QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
         return ;
     }  
+    mConnectProgress.setTotalSteps ( file2.size() );
+    mConnectProgress.show();
+    int count = 0;
+    mConnectProgress.setLabelText( i18n("Sending back synced file...") );
+    mConnectProgress.setProgress( count );
+    mConnectProgress.blockSignals( true );
     QTextStream ts2( &file2 );
     ts2.setEncoding( QTextStream::Latin1 );
     QTextStream os2( mSocket );
     os2.setEncoding( QTextStream::Latin1 );
     os2 << "PUT " << mPassWord << "\r\n\r\n";;
     while ( ! ts2.atEnd() ) {
-        os2 << ts2.readLine() << "\r\n";
+        qApp->processEvents();
+        mConnectProgress.setProgress( count );
+        QString temp = ts2.readLine();
+        count += temp.length();
+        os2 << temp << "\r\n";
     }
+    file2.close();
+    mConnectProgress.hide();
+    mConnectCount = -1;
     os2 << "\r\n";
     mRetVal= successW;
-    file2.close();
     mSocket->close();
     if ( mSocket->state() == QSocket::Idle )
         QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
+    mConnectProgress.blockSignals( false );
 }
 void KCommandSocket::sendStop()
 {
     if ( !mSocket ) {
         mSocket = new QSocket( this );
         connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
     }
     mSocket->connectToHost( mHost, mPort ); 
     QTextStream os2( mSocket );
     os2.setEncoding( QTextStream::Latin1 );
     os2 << "STOP\r\n\r\n";
     mSocket->close();
     if ( mSocket->state() == QSocket::Idle )
         QTimer::singleShot( 10, this , SLOT ( deleteSocket()));
 }
 
 void KCommandSocket::startReadFileFromSocket()
 {
     if ( ! mFirst )
         return;
+    mConnectProgress.setLabelText( i18n("Receiving file from remote...") );
     mFirst = false;
-    mTimerSocket->stop();
     mFileString = "";
     mTime.start();
     mFirstLine = true;
     QTimer::singleShot( 1, this , SLOT (readFileFromSocket( ) ));
 
 }
 void KCommandSocket::readFileFromSocket()
 {
     //qDebug("readBackFileFromSocket() %d ", mTime.elapsed ());
     while ( mSocket->canReadLine ()  ) {
         mTime.restart();
         QString line = mSocket->readLine ();
         if ( mFirstLine ) {
             mFirstLine = false;
             if (  line.left( 6 ) == "ERROR_" ) {
+                mTimerSocket->stop();
+                mConnectCount = -1;
                 if (  line.left( 8 ) == "ERROR_PW" ) {
                     mRetVal = errorPW;
                     deleteSocket();
                     return ;
                 }
                 if (  line.left( 8 ) == "ERROR_CA" ) {
                     mRetVal = errorCA;
                     deleteSocket();
                     return ;
                 }
                 if (  line.left( 8 ) == "ERROR_FI" ) {
                     mRetVal = errorFI;
                     deleteSocket();
                     return ;
                 }
                 if (  line.left( 8 ) == "ERROR_ED" ) {
                     mRetVal = errorED;
                     deleteSocket();
                     return ;
                 }
                 mRetVal = errorUN;
                 deleteSocket();
                 return ;
             }
         }
         mFileString += line;
         //qDebug("readline: %s ", line.latin1());
     }
     if ( mTime.elapsed () < 3000 ) {
         // wait for more 
         //qDebug("waitformore ");
         QTimer::singleShot( 100, this , SLOT (readFileFromSocket( ) ));
         return;
     }
+    mTimerSocket->stop();
+    mConnectCount = -1;
+    mConnectProgress.hide();
     QString fileName = mFileName;
     QFile file ( fileName );
     if (!file.open( IO_WriteOnly ) ) {
         mFileString = "";
         mRetVal = errorR;
         qDebug("KSS:Error open temp sync file for writing: %s",fileName.latin1() );
         deleteSocket();
         return ;
                     
     } 
     // mView->setLoadedFileVersion(QDateTime::currentDateTime().addSecs( -1));
     QTextStream ts ( &file );
     ts.setEncoding( QTextStream::Latin1 );
     ts << mFileString;
     file.close();  
     mFileString = "";
     mRetVal = successR;
     mSocket->close();
     // if state is not idle, deleteSocket(); is called via 
     //  connect( mSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteSocket()) );
     if ( mSocket->state() == QSocket::Idle )
         deleteSocket();
 }
 
 void KCommandSocket::deleteSocket()
 {
     //qDebug("KCommandSocket::deleteSocket() ");
-    if ( mTimerSocket->isActive () ) {
+    mConnectProgress.hide();
+   
+    if ( mConnectCount >= 0  ) {
         mTimerSocket->stop();
         mRetVal = errorTO;
         qDebug("KCS::Connection to remote host timed out");
         if ( mSocket ) {
             mSocket->close();
             //if ( mSocket->state() == QSocket::Idle )
             //   deleteSocket();
             delete mSocket;
             mSocket = 0;
         }
+        if ( mConnectCount == 0  )
         KMessageBox::error( 0, i18n("Connection to remote\nhost timed out!\nDid you forgot to enable\nsyncing on remote host?"));
+        else if ( tlw )
+            tlw->setCaption( i18n("Connection to remote host cancelled!") );
         emit commandFinished( this, mRetVal );
         return;      
     }
     //qDebug("KCommandSocket::deleteSocket() %d", mRetVal ); 
     if ( mSocket)
         delete mSocket;
     mSocket = 0; 
+    qDebug("commandFinished ");
     emit commandFinished( this, mRetVal );
 }
diff --git a/libkdepim/ksyncmanager.h b/libkdepim/ksyncmanager.h
index 30ec1e6..e6738b6 100644
--- a/libkdepim/ksyncmanager.h
+++ b/libkdepim/ksyncmanager.h
@@ -1,230 +1,236 @@
 /*
   This file is part of KDE-Pim/Pi.
   Copyright (c) 2004 Ulf Schenk
 
   This library is free software; you can redistribute it and/or
   modify it under the terms of the GNU Library General Public
   License as published by the Free Software Foundation; either
   version 2 of the License, or (at your option) any later version.
 
   This library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   Library General Public License for more details.
 
   You should have received a copy of the GNU Library General Public License
   along with this library; see the file COPYING.LIB.  If not, write to
   the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
   Boston, MA 02111-1307, USA.
 
   $Id$
 */
 #ifndef _KSYNCMANAGER_H
 #define _KSYNCMANAGER_H
 
 #include <qobject.h>
 #include <qstring.h>
 #include <qsocket.h>
 #include <qdatetime.h>
 #include <qserversocket.h> 
 #include <qtextstream.h>
 #include <qregexp.h>
+#include <qprogressdialog.h>
 
 class QPopupMenu;
 class KSyncProfile;
 class KPimPrefs;
 class QWidget;
 class KSyncManager;
 class KSyncInterface;
 class QProgressBar;
 
 
 class KServerSocket : public QServerSocket
 {
     Q_OBJECT
 
         public:
     KServerSocket ( QString password, Q_UINT16 port, int backlog = 0, QObject * parent=0, const char * name=0 );
 
     void newConnection ( int socket ) ;
     void setFileName( QString fn  ) {mFileName = fn;};
  signals:
     void file_received( bool );
     void request_file();
     void saveFile();
     void endConnect();
     private slots:
     void discardClient();
     void deleteSocket();
     void readClient();
     void displayErrorMessage();
     void readBackFileFromSocket();
  private :
     int mErrorMessage;
     bool blockRC;
     void send_file();
     void get_file();
     void end_connect();
     void error_connect( QString );
     QDialog* mSyncActionDialog;
     QSocket* mSocket; 
     QString mPassWord;
     QString mFileName; 
     QTime piTime;
     QString piFileString;
 };
 
 class KCommandSocket : public QObject
 {
     Q_OBJECT
         public:
     enum state { successR, errorR, successW, errorW, errorTO, errorPW, errorCA, errorFI, errorUN, errorED,quiet };
     KCommandSocket ( QString password, Q_UINT16 port, QString host, QObject * parent=0, QWidget*  cap = 0, const char * name=0 );
     void readFile( QString );
     void writeFile( QString );
     void sendStop();
 
  private slots :
     void sendFileRequest();
+    void updateConnectDialog();
        
  signals:
     void commandFinished( KCommandSocket*, int );
     private slots:
     void startReadFileFromSocket();
     void readFileFromSocket();
     void deleteSocket();
     void writeFileToSocket();
  private :
+    int mConnectCount;
+    int mConnectMax;
+    QProgressDialog mConnectProgress;
     QWidget* tlw;
     QSocket* mSocket; 
     QString mPassWord;
     Q_UINT16 mPort;
     QString mHost;
     QString mFileName;
     QTimer* mTimerSocket;
     int mRetVal;
     QTime mTime;
     QString mFileString;
     bool mFirst;
     bool mFirstLine;
 };
 
 
 class KSyncManager : public QObject
 {
     Q_OBJECT
 
         public:
     enum TargetApp {
         KOPI = 0,
         KAPI = 1,
         PWMPI = 2 };
   
     KSyncManager(QWidget* parent, KSyncInterface* implementation, TargetApp ta, KPimPrefs* prefs, QPopupMenu* syncmenu);
     ~KSyncManager() ;
 
     void multiSync( bool askforPrefs  );
     bool blockSave() { return mBlockSaveFlag; }
     void setBlockSave(bool sa) { mBlockSaveFlag = sa; }
     void setDefaultFileName( QString s) ;
     QString defaultFileName() { return mDefFileName ;}
     QString syncFileName();
     void enableQuick( bool ask = true);
 
     bool syncWithDesktop () { return mSyncWithDesktop;}
     QString getCurrentSyncDevice() { return mCurrentSyncDevice; }
     QString getCurrentSyncName() { return mCurrentSyncName; }
 
     void showProgressBar(int percentage, QString caption = QString::null, int total=100);
     void hideProgressBar();
     bool isProgressBarCanceled();
 
     // sync stuff
     QString mLocalMachineName;
     QStringList  mExternSyncProfiles;
     QStringList  mSyncProfileNames;
     bool mAskForPreferences;
     bool mShowSyncSummary;
     bool mIsKapiFile;
     bool mWriteBackExistingOnly;
     int mSyncAlgoPrefs;
     bool mWriteBackFile;
     int  mWriteBackInFuture;
     int  mWriteBackInPast;
     QString mPhoneDevice;
     QString mPhoneConnection;
     QString mPhoneModel;
     QString mPassWordPiSync;
     QString mActiveSyncPort;
     QString mActiveSyncIP ;
     QString mFilterInCal;
     QString mFilterOutCal;
     QString mFilterInAB;
     QString mFilterOutAB;
     static QDateTime mRequestedSyncEvent;
 
  signals:
     void save();
     void request_file();
     void getFile( bool );
 
     public slots:
     void slotSyncMenu( int );
     void slotClearMenu( int action );
     void deleteCommandSocket(KCommandSocket*s, int state);
     void readFileFromSocket();
     void fillSyncMenu();
 
  private:
     void syncPi();
     KServerSocket * mServerSocket;
     KPimPrefs* mPrefs;
     QString mDefFileName;
     QString mCurrentSyncDevice;
     QString mCurrentSyncName;
     void quickSyncLocalFile();
     bool syncWithFile( QString fn , bool quick );
     void syncLocalFile();
     void syncPhone();
     void syncSharp();
     void syncKDE();
     bool syncExternalApplication(QString);
     int mCurrentSyncProfile ;
     void syncRemote( KSyncProfile* prof,  bool ask = true);
     bool edit_sync_options();
     bool edit_pisync_options();
     int ringSync();
     QString  getPassword( );
     bool mPisyncFinished;
     bool mBlockSaveFlag;
     QWidget* mParent;
     KSyncInterface* mImplementation;
     TargetApp mTargetApp; 
     QPopupMenu* mSyncMenu;
     QProgressBar* bar;
     bool mSyncWithDesktop;
 
 private slots:
+    void displayErrorPort();
     void confSync();
 
 
 };
 
 
 class KSyncInterface 
 { 
  public :
     virtual void removeSyncInfo( QString syncProfile) = 0;
     virtual bool sync(KSyncManager* manager, QString filename, int mode) = 0;
     virtual bool syncExternal(KSyncManager* manager, QString resource)
     {
         // empty implementation, because some syncable applications do not 
         // have an external(sharpdtm)  syncmode, like pwmanager.
         return false;
     }
 
    
 };
 
 
 #endif