fixxx

3 files changed, 42 insertions, 36 deletions

diff --git a/bin/kdepim/korganizer/germantranslation.txt b/bin/kdepim/korganizer/germantranslation.txt
index 90521ec..2ade5bd 100644
--- a/bin/kdepim/korganizer/germantranslation.txt
+++ b/bin/kdepim/korganizer/germantranslation.txt
@@ -1312,147 +1312,153 @@
 { "KO/Pi Print Confirmation","KO/Pi Druckbestätigung" },
 { "This prints the view as you see it.\n(With the complete content, of course.)\nYou may change the print layout by resizing the view.\nPrint unscaled may print several pages\ndepending on the amount of data.\nPrint scaled down will print all on one page.\nPrint scaled up/down will print all on one page,\nbut will scale up the text to page boundaries,\nif the text is smaller than the page.\nYou can select page geometry setup in the next dialog.\n","Dies druckt die Ansicht wie man sie sieht.\n(Mit dem kompletten Inhalt natürlich.)\nMan kann das Layout ändern durch ändern der Fenstergröße.\nDrucke unskaliert druckt ggf. mehrere Seiten\nabhängig von der Menge der Daten.\nDrucke runterskaliert um auf eine Seite zu passen\ndruckt alles auf eine Seite.\nDrucke hoch/runterskaliert um genau auf eine Seite zu passen\nvergrößert den Text gegebenenfalls.\nDas Seitenlayout kann im nächsten Dialog gewählt werden.\n" },
 { "KO/Pi Printout","KO/Pi Ausdruck" },
 { "Print unscaled","Drucke unskaliert" },
 { "Print scaled down to fit one page","Drucke runterskaliert um auf eine Seite zu passen." },
 { "Print scaled up/down to fit one page","Drucke hoch/runterskaliert um genau auf eine Seite zu passen." },
 { "Printout Mode","Druck Modus" },
 { "Filter menu icon","Filtermenu Icon" },
 { "<p><b>A+(shift or ctrl)</b>: Show occurence of next alarm</p>\n","<p><b>A+(shift oder ctrl)</b>: Zeige Zeit bis zum nächsten Alarm</p>\n" },
 { "<p><b>N</b>: Switch to next view which has a toolbar icon</p>\n","<p><b>N</b>: Wechsle zur nächsten Ansicht, die ein Icon in der Toolbar hat</p>\n" },
 { "%1d","%1t" },
 { "%1h","%1std" },
 { "%1min","%1min" },
 { "( %1 before )","( %1 vorher )" },
 { "The next alarm is in\nless than one minute!","Der nächste Alarm kommt in\nweniger als einer Minute!" },
 { "\nThe internal alarm notification is disabled!\n","\nDie interne Alarmbenachrichtigung ist ausgeschaltet!\n" },
 { "Enable it in the settings menu, TAB alarm.","Schalten Sie sie an im Menu Einstellungen, TAB Alarm." },
 { "Show Sync Events","Zeige Sync-Ereignisse" },
 { "Use short date in WN+Event view","Zeige Kurzdatum in WN+Terminanzeige" },
 { "Number of max.displayed todo prios:","Anzahl max.angezeigter Todo-Prios:" },
 { " on "," am " },
 { "On: ","Am: " },
 { "<i>The recurrence is computed from the start datetime!</i>","<i>Die Wiederholung wird vom Startwert aus berechnet!</i>" },
 { "Start/Stop todo...","Starte/Stoppe Todo..." },
 { "Color for running todos:","Farbe für laufende Todos:" },
 { "The todo\n%1\nis started.\nDo you want to set\nthe state to stopped?","Das Todo\n%1\nist gestartet.\nWollen Sie es\nauf gestoppt setzen?" },
 { "Todo is started","Todo ist gestartet" },
 { "Stop todo","Stoppe Todo" },
 { "Todo is stopped","Todo ist gestoppt" },
 { "Start todo","Starte Todo" },
 { "The todo\n%1\nis stopped.\nDo you want to set\nthe state to started?","Das Todo\n%1\nist gestoppt.\nWollen Sie es auf\ngestartet setzen?" },
 { "The todo\n%1\nwill be cloned!\nIt has subtodos!\nDo you want to clone\nall subtodos as well?","Das Todo\n%1\nwird geklont!\nEs hat Untertodos!\nMöchten Sie alle\nUntertodos auch klonen?" },
 { "Todo has subtodos","Todo hat Untertodos" },
 { "Block popup until mouse button release","Sperre Popup bis Mausknopf losgelassen" },
 { "Colors","Farben" },
 { "Click on new parent item","Klicke auf neues Übertodo" },
 { "Reparenting aborted!","Übertodo setzen abgebrochen" },
 { "Cannot move Todo to itself\nor a child of itself","Kann nicht Todo auf\nsich selbst oder\nein Untertodo verschieben" },
 { "Recursive reparenting not possible!","Rekursives Verschieben nicht möglich" },
 { "Delete all completed todos?\n(Completed recurring todos\nwill not be deleted!)","Entferne alle erledigten Todos?\n(Erledigte wiederholende Todos\nwerden nicht gelöscht!)" },
 { "Alternating background of list views","Abwechselnder Hintergrund für Listen" },
 { "times","Zeiten" },
 { "The todo\n%1\nhas subtodos!\nDo you want to set\nthe categories for\nall subtodos as well?","Das Todo\n%1\nhat Untertodos!\nMöchten Sie die Kategorien\nauch für alle Untertodos setzen?" },
 { "Backup enabled","Backup angeschaltet" },
 { "Use standard backup dir","Standard Backupverzeichnis" },
 { "Number of Backups:","Anzahl der Backups" },
 { "Make backup every ","Mache ein Backup alle " },
 { " days"," Tage" }, 
-{ "Creating backup ... please wait ...","Erzeuge Backup ... bitte warten ..." },
+{ "Creating backup ... please wait ...","Erstelle Backup ... bitte warten ..." },
 { "Backup Failed!","Backup Problem!" },
 { "Try again now","Versuche jetzt nochmal" },
 { "Try again later","Versuche später nochmal" },
 { "Try again tomorrow","Versuche morgen nochmal" },
 { "Disable backup","Schalte Backup ab" },
 { "<b>Backup directory does not exist: </b>","<b>Backup Verzeichnis existiert nicht: </b>" },
 { "<b>The backup copy command failed!</b>","<b>Das Backup Kopierkommando is fehlgeschlagen!</b>" },
 { "Choose action","Wähle Aktion" },
 { "Comment for todo:","Kommentar zum Todo:" },
 { "Stop+note","Stop+Notiz" },
 { "Agenda view shows completed todos","Agenda Ansicht zeigt erledigte Todos" },
 { "KO/Pi: Missing alarms!","KO/Pi: Verpasste Alarme!" },
 { "You missed the alarms for the following events or todos:","Sie verpassten die Alarme für folgende Termine oder Todos:" },
 { "Print complete list","Drucke komplette Liste" },
 { "Hide all selected","Verstecke Selektierte" },
 { "Add items","hinzufügen" },
 { "One (or more) selected\ntodo has subtodos!\nDo you want to select\nall subtodos of all\nselected todos as well?","Ein (oder mehrere) ausgewähltes\nTodo hat Untertodos!\nMöchten Sie der Auswahlliste\nalle Untertodos von allen\nausgewählten Todos hinzufügen?" },
 { "Print List View...","Drucke Listenansicht..." },
 { "You can make a printout of the <b>List View</b> and the list view in the <b>Search Dialog</b>! To do this, please go to the <b>List View/Search Dialog</b>. Right click on the list. Select in the popup menu the entry <b>Print complete list</b>. That prints the list as you see it. You can remove items from the list before printing without deleting the corresponding event/todo! Simply select all items you do not want to print out. Then right click on one of the items and choose <b>Hide selected items</b>. After that you can print the list without these items.","Sie können die <b>Listenansicht</b> und die Listenansicht im <b>Suchdialog</b> ausdrucken! Um das zu machen gehen Sie bitte zur <b>Listenansicht</b> oder zum <b>Suchdialog</b>. Rechtsklicken Sie auf die Liste. Wählen Sie im Popupmenu den Eintrag <b>Drucke komplette Liste</b>. Das druckt die Liste so, wie man sie sieht. Sie können Listeneinträge entfernen ohne die korrespondierenden Ereignisse/Todos zu löschen! Selektieren sie einfach alle Einträge, die sie nicht ausdrucken möchten. Dann Rechtsklicken Sie auf einen Eintrag und wählen <b>Verstecke Selektierte</b>. Danach können Sie die Liste ohne diese Einträge ausdrucken." },
 { "Configure KO/Pi...","Konfiguriere KO/Pi..." },
 { "Global Settings...","Globale Einstellungen..." },
 { "<p><b>R</b>: Toggle Resource View |<b>F</b>: Edit filter </p>\n","<p><b>R</b>: Zeige Resource Ansicht | <b>F</b>: Editiere Filter </p>\n" },
 { "(disabled)","(abgeschaltet)" },
 { "New Calendar","Neuer Kalender" },
 { "Calendar","Kalender" },
 { "Filter selector","Filterauswahl" },
 { "Filtermenu","Filtermenu" },
 { "Toggle Fullscreen","Vollbild umschalten" },
 { "Toggle Resource View","Resourcenansicht umschalten" },
 { "Storage HowTo...","Speicherort HowTo..." },
 { "Timetracking HowTo...","Timetracking HowTo..." },
 { "Juni","Juni" },
 { "Juli","Juli" },
 { "ToDo:","ToDo:" },
 { "Set Calendar","Setze Kalender" },
 { "Todo: %1","Todo: %1" },
 { ": (Prio ",": (Prio " },
 { "Todos","Todos" },
 { "Todo Viewer","Todo Viewer" },
 { "Todo ","Todo " },
 { " Calendar \n Resource "," Kalender \n Resource " },
 { " Color "," Farbe " },
 { "The calendar <b>%1</b> is displaying file <b>%2</b>. Do you want to remove this calendar from KO/Pi? (The file is not removed!)","Der Kalender <b>%1</b> zeigt die Datei <b>%2</b>. Möchten Sie diesen Kalender aus KO/Pi entfernen? (Die Datei wird dabei nicht gelöscht!)" },
 { "The calendar <b>%1</b> is displaying file <b>%2</b>","Der Kalender <b>%1</b> zeigt die Datei <b>%2</b>" },
 { "Add new Calendar","Füge Kalender hinzu" },
 { "<b>Name of new calendar:</b>","<b>Name des Kalenders:</b>" },
 { "<b>Local ical (*.ics) file:</b>","<b>Lokale ical (*.ics) Datei:</b>" },
 { "Sorry, the calendar name is empty!","Sorry, der Kalendername ist leer!" },
 { "Sorry, the file name is empty!","Sorry, der Dateiname ist leer!" },
 { "Error loading calendar file\n%1.","Fehler beim Laden der Kalenderdatei\n%1." },
 { "The calendar <b>%1</b> is not loaded! Loading of file <b>%2</b> failed! <b>Try again to load the calendar?</b>","Der Kalender <b>%1</b> ist nicht geladen! Das Laden der Datei <b>%2</b> schlug fehl! <b>Soll erneut versucht werden den Kalender zu laden?</b>" },
 { "Global application font for all apps:","Globale Schriftart:" },
 { "Application Font","Applikationsschriftart" },
 { "Kx/Pi","Kx/Pi" },
 { "Backup","Backup" },
 { "KDE-Pim Global Settings","KDE-Pim Globale Einstellungen" },
 { "Sorry, the calendar name \n%1\nalready exists!\nPlease choose another name!","Sorry, der Kalendername \n%1\nist schon in Benutzung!\nBitte wählen Sie einen anderen!" },
 { "Sorry, the file \n%1\nis already loaded!\nPlease choose another file!","Sorry, die Datei \n%1\nist schon geladen!\nBitte wählen Sie eine andere!" },
 { "Choose Color","Wähle Farbe" },
 { " OK "," OK " },
 { " Cancel "," Abbrechen " },
 { "Matching items will be added to list","Passende werden zur Liste hinzugefügt" },
 { "Matching items will be removed from list","Passende werden von der Liste entfernt" },
 { "Search on displayed list only","Suche auf der dargestellten Liste" },
 { "List will be cleared before search","Liste wird vor der Suche gelöscht" },
 { "<center>%1</center> <center>is not running. Do you want to set\nthe state to running?</center>","<center>%1</center> <center>ist nicht am Laufen. Möchten Sie den Zustand auf "laufend" setzen?</center>" },
 { "%1\nis running!","%1\nist am Laufen!" },
 { "Additional Comment:","Zusätzlicher Kommentar:" },
 { "Stop and save","Stopp und Speichern" },
 { "Continue running","Weiter laufen lassen" },
 { "Stop - do not save","Stopp - nicht Speichern" },
 { "Do you really want to set\nthe state to stopped\nwithout saving the data?","Möchten sie den Zustand\nwirklich auf gestoppt setzen\nohne die Daten abzuspeichern?" },
 { "Time mismatch!","Zeiten stimmen nicht!" },
 { "The start time is\nafter the end time!","Die Startzeit ist\nhinter der Endzeit!" },
 { "Yes, stop todo","Ja, stoppe Todo" },
 { "Todo stopped - no data saved because runtime was < 15 sec!","Todo gestoppt - nichts gespeichert da Laufzeit < 15 sec!" },
 { "Todo started! Double click again to stop!","Todo gestartet! Doppelklicke um es zu stoppen!" },
 { "Please choose the <b>default calendar</b> in this column. Newly created or imported items are added to the default calendar.","Bitte wählen Sie den <b>Default-Kalender</b> in dieser Spalte. Neu angelegte oder importierte Einträge werden dem Default-Kalender hinzugefügt." },
 { "Spouse","Ehegatte" },
 { "Notes","Notizen" },
 { "Messanger","Messanger" },
 { "Assistant","Assistent" },
 { "Manager","Manager" },
 { "Secrecy","Sichtbar" },
 { "male","männlich" },
 { "female","weiblich" },
 { "Hide!","Verbergen!" },
 { "Show!","Anzeigen!" },
 { "Details","Details" },
 { "Profession","Beruf" },
 { "Children","Kinder" },
 { "Department","Abteilung" },
+{ "Backup cancelled","Backup abgebrochen" },
+{ "Backup globally disabled","Backup global abgeschaltet" },
+{ "Backup succesfully finished","Backup erfolgreich beendet" },
+{ "(Hint: You can enable automatic backup in the global settings!)","(Hinweis: Sie können ein automatisches Backup in den globalen Einstellungen konfigurieren!)" },
+{ "This will <b>backup all calendar files</b> to the directory %1 %2","Das schreibt ein <b>Backup aller Kalenderdateien</b> in das Verzeichnis %1 %2" },
+{ "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
 { "","" },
\ No newline at end of file
diff --git a/korganizer/mainwindow.cpp b/korganizer/mainwindow.cpp
index 48320a5..b9d8742 100644
--- a/korganizer/mainwindow.cpp
+++ b/korganizer/mainwindow.cpp
@@ -988,101 +988,102 @@ void MainWindow::initActions()
     action->addTo( actionMenu );
     connect( action, SIGNAL( activated() ), mView, SLOT( purgeCompleted() ) );
 
     icon = loadPixmap( pathString + "search" );
     QAction* search_action = new QAction( i18n("Search"), icon, i18n("Search..."), 0, this );
     configureToolBarMenu->insertItem(icon, i18n("Search"), 120 , 5);
     search_action->addTo( actionMenu );
     connect( search_action, SIGNAL( activated() ),
              mView->dialogManager(), SLOT( showSearchDialog() ) );
 
     
 
     if ( KOPrefs::instance()->mShowFullMenu ) {
         actionMenu->insertSeparator();
         actionMenu->insertItem( i18n("Configure Toolbar"),configureToolBarMenu );
 
     }
     // actionMenu->insertSeparator();
     action = new QAction( "import_qtopia", i18n("Import (*.ics/*.vcs) file"), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( importIcal() ) );
     action = new QAction( "import_quick", i18n("Import last file"), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( quickImportIcal() ) );
     importMenu_X->insertSeparator();
     action = new QAction( "import_bday", i18n("Import Birthdays (KA/Pi)"), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( importBday() ) );
     //#ifndef DESKTOP_VERSION
     importMenu_X->insertSeparator();
     action = new QAction( "import_qtopia", i18n("Import Opie/Qtopia Cal."), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( importQtopia() ) );
     //#else
 #ifdef _OL_IMPORT_
     importMenu_X->insertSeparator();
     action = new QAction( "import_ol", i18n("Import from OL"), 0,
                           this );
     action->addTo( importMenu_X );
     connect( action, SIGNAL( activated() ), SLOT( importOL() ) );
 #endif
     //#endif
 
     //importMenu->insertSeparator();
+#if 0
     action = new QAction( "load_cal", i18n("Load Calendar Backup"), 0,
                           this );
     action->addTo( importMenu );
     connect( action, SIGNAL( activated() ), SLOT( loadCalendar() ) );
-
+#endif
     action = new QAction( "save_cal", i18n("Save Calendar Backup"), 0,
                           this );
     action->addTo( importMenu );
     connect( action, SIGNAL( activated() ), SLOT( saveCalendar() ) );
     importMenu->insertSeparator();
     importMenu->insertItem( i18n("Import"), importMenu_X );
     //importMenu->insertSeparator();
     action = new QAction( "import_qtopia", i18n("Export VCalendar"), 0,
                           this );
     action->addTo( exportMenu_X );    
     connect( action, SIGNAL( activated() ), SLOT( exportVCalendar() ) );
 
 
     //LR
     QPopupMenu *ex2phone = new QPopupMenu( this );
     ex2phone->insertItem(i18n("Complete calendar..."), 1 );
     ex2phone->insertItem(i18n("Filtered calendar..."), 2 );
     connect( ex2phone, SIGNAL( activated(int) ), this, SLOT( exportToPhone( int)) );
     exportMenu_X->insertItem( i18n("Export to phone"), ex2phone );
 
     importMenu->insertItem( i18n("Export"), exportMenu_X );
 #ifndef DESKTOP_VERSION
     //importMenu->insertSeparator();
     brAction = new QAction( "beam toggle", i18n("Beam receive enabled"), 0,
                           this );
     brAction->addTo( beamMenu_X ); 
     brAction->setToggleAction (true ) ;
     connect( brAction, SIGNAL( activated() ), this, SLOT( toggleBeamReceive() ) );
 
     action = new QAction( "beam all", i18n("Beam complete calendar..."), 0,
                           this );
     action->addTo( beamMenu_X );
     connect( action, SIGNAL( activated() ), mView, SLOT( beamCalendar() ) );
 
     action = new QAction( "beam all", i18n("Beam filtered calendar..."), 0,
                           this );
     action->addTo( beamMenu_X );
     connect( action, SIGNAL( activated() ), mView, SLOT( beamFilteredCalendar()) );
     importMenu->insertItem( i18n("Beam"), beamMenu_X );
 #else
     //importMenu->insertSeparator();
     icon = loadPixmap( pathString + "print" );
     action = new QAction( i18n("Print calendar..."),icon,i18n("Print calendar..."), 0, this );
     action->addTo( beamMenu_X );
     connect( action, SIGNAL( activated() ),
              this, SLOT( printCal() ) );
 
     icon = loadPixmap( pathString + "print" );
@@ -1800,141 +1801,150 @@ void MainWindow::saveOnClose()
             p->mToolBarUpF = myP.x() > width()/2 ;
     }
 #else
     if (  p->mToolBarHor )
         p->mToolBarUp = iconToolBar->y() > height()/2;
     else
         p->mToolBarUp = iconToolBar->x() > width()/2;
     if ( p->mToolBarHorV )
         p->mToolBarUpV = viewToolBar->y() > height()/2;
     else
         p->mToolBarUpV = viewToolBar->x() > width()/2 ;
     
     if ( p->mToolBarHorN )
         p->mToolBarUpN = navigatorToolBar->y() > height()/2;
     else
         p->mToolBarUpN = navigatorToolBar->x() > width()/2 ;
     if ( filterToolBar ) {
         if ( p->mToolBarHorF )
             p->mToolBarUpF = filterToolBar->y() > height()/2;
         else
             p->mToolBarUpF = filterToolBar->x() > width()/2 ;
     }
 #endif
 
     if ( mCalendarModifiedFlag || mView->checkFileChanged( defaultFileName()))
         save();
     mView->writeSettings();
 }
 void MainWindow::slotModifiedChanged( bool changed )
 {
     if ( mBlockAtStartup )
         return;
    
     int msec;
     // we store the changes after 1 minute,
     // and for safety reasons after 10 minutes again
     if ( !mSyncManager->blockSave() )
         msec = (1000 * 60*KOPrefs::instance()->mAutoSaveInterval) +1000;
     else
         msec = 1000 * 600;
     mSaveTimer.start( msec, true ); // 1 minute
     qDebug("KO: Saving File in %d secs!", msec/1000);
     mCalendarModifiedFlag = true;
 }
 void MainWindow::saveStopTimer()
 {
     mSaveTimer.stop();
 }
-void MainWindow::save()
+void MainWindow::backupAllFiles()
 {
-    if ( !mCalendarModifiedFlag ) {
-        qDebug("KO: Calendar not modified. Nothing saved.");
-        return;
-    }
-    if ( mSyncManager->blockSave() )
-        return;
-    mSyncManager->setBlockSave(true);
-    if ( mView->checkAllFileVersions() ) {
-        if ( KPimGlobalPrefs::instance()->mBackupEnabled ){
             QDate reference ( 2000,1,1);
             int daysTo = reference.daysTo ( QDate::currentDate() );
-            if ( daysTo - KPimGlobalPrefs::instance()->mBackupDayCount >= KOPrefs::instance()->mLastBackupDate ) {
                 setCaption(i18n("Creating backup ... please wait ..." ));
                 qDebug("KO: Last backup was %d days ago ", daysTo - KOPrefs::instance()->mLastBackupDate);
                 // we need the file path, the backup dir and the number of bups as param
                 QString bupDir = KPimGlobalPrefs::instance()->mBackupDatadir;
                 if ( KPimGlobalPrefs::instance()->mBackupUseDefaultDir)
                     bupDir = KGlobalSettings::backupDataDir();
                 int retval =  KApplication::createBackup(  defaultFileName(), bupDir, KPimGlobalPrefs::instance()->mBackupNumbers );
                 if ( retval == 0 ) {
+        setCaption(i18n("Backup cancelled" ));
                     qDebug("KO: Backup cancelled. Will try again tomorrow ");
                     // retval == 0 : backup skipped for today, try again tomorrow
                     KOPrefs::instance()->mLastBackupDate = daysTo- KPimGlobalPrefs::instance()->mBackupDayCount+1;
                 } else if ( retval == 1 ){
                     qDebug("KO: Backup created.");
                     // backup ok
                     QPtrList<KopiCalendarFile> calendars = KOPrefs::instance()->mCalendars;
                     KopiCalendarFile * cal = calendars.first();
                     cal = calendars.next();
                     while ( cal ) {
                         if ( !cal->mErrorOnLoad ) {
                           int retval =  KApplication::createBackup(  cal->mFileName, bupDir, KPimGlobalPrefs::instance()->mBackupNumbers );  
                         }
                         cal = calendars.next();
                     }
                     KOPrefs::instance()->mLastBackupDate =  daysTo;
+        setCaption(i18n("Backup succesfully finished" ));
                 } else if ( retval == 2 ){
+        setCaption(i18n("Backup globally disabled" ));
                     qDebug("KO: Backup globally cancelled.");
                     // backup globally cancelled
                     KPimGlobalPrefs::instance()->mBackupEnabled = false;
                 }
                 // retval == 3: do nothing, try again later
             }
+void MainWindow::save()
+{
+    if ( !mCalendarModifiedFlag ) {
+        qDebug("KO: Calendar not modified. Nothing saved.");
+        return;
+    }
+    if ( mSyncManager->blockSave() )
+        return;
+    mSyncManager->setBlockSave(true);
+    if ( mView->checkAllFileVersions() ) {
+        if ( KPimGlobalPrefs::instance()->mBackupEnabled ){
+            QDate reference ( 2000,1,1);
+            int daysTo = reference.daysTo ( QDate::currentDate() );
+            if ( daysTo - KPimGlobalPrefs::instance()->mBackupDayCount >= KOPrefs::instance()->mLastBackupDate ) {
+                backupAllFiles();
+            }
                 ; //  KPimGlobalPrefs::instance()->mLastBackupDate
         }
         QTime neededSaveTime = QDateTime::currentDateTime().time();
         setCaption(i18n("KO/Pi:Saving Data to File ..." ));
         qDebug("KO: Start saving data to file!");
         mView->saveCalendars();
         mCalendarModifiedFlag = false;
         int msNeeded = neededSaveTime.msecsTo( QDateTime::currentDateTime().time() );
         qDebug("KO: Needed %d ms for saving.",msNeeded );
         QString savemes;
         savemes.sprintf(i18n("KO/Pi:File Saved. Needed %d sec, %d ms"),(msNeeded/1000)%100,msNeeded%1000  );
         setCaption(savemes);
     } else
         setCaption(i18n("Saving cancelled!"));
     mSyncManager->setBlockSave( false );
 }
 
 void MainWindow::keyReleaseEvent ( QKeyEvent * e)
 {
     if ( !e->isAutoRepeat() ) {
         mFlagKeyPressed = false;
     }
 }
 void MainWindow::keyPressEvent ( QKeyEvent * e )
 {
     qApp->processEvents();
     if ( e->isAutoRepeat() && !mFlagKeyPressed ) {
         e->ignore();
         // qDebug("  ignore  %d",e->isAutoRepeat()  );
         return;
     }
     if (! e->isAutoRepeat() )
         mFlagKeyPressed = true;
     KOPrefs *p = KOPrefs::instance();
     bool showSelectedDates = false;
     int size;
     int pro = 0;
     //qDebug("MainWindow::keyPressEvent ");
     switch ( e->key() ) {
     case Qt::Key_Right:
         if ( e->state() == Qt::ControlButton ||  e->state() == Qt::ShiftButton)
             mView->goNextMonth();
         else
             mView->goNext();
         showSelectedDates = true;
         break;
     case Qt::Key_Left:
         if ( e->state() == Qt::ControlButton||  e->state() == Qt::ShiftButton )
@@ -2255,155 +2265,144 @@ void MainWindow::setCaption ( const QString & c )
     QString cap = c;
     cap.replace( QRegExp("\n"), " " );
     cap = cap.stripWhiteSpace();
     if ( cap.isEmpty() )
         cap = "KO/Pi";
     QWidget::setCaption( cap );
 }
 void MainWindow::setCaptionToDates()
 {
     QString selDates;
     QDate date = mView->startDate();
     if ( ! date.isValid() ) {
         setCaption("");
         return;
     }
     selDates = KGlobal::locale()->formatDate( date, true);
     if  (mView->startDate() < mView->endDate() )
         selDates += " - " + KGlobal::locale()->formatDate(mView->endDate(), true); 
     else {
         QString addString;
         if ( date == QDateTime::currentDateTime().date() )
             addString = i18n("Today");
         else if ( date == QDateTime::currentDateTime().date().addDays(1) )
             addString = i18n("Tomorrow");
         if ( !addString.isEmpty() )
             selDates = addString+", "+selDates ;
     }
     setCaption( i18n("Dates: ") + selDates );
 
 }
 void MainWindow::showConfigureAgenda( )
 {
     int iii;
     for ( iii = 1;iii<= 10 ;++iii ){
         configureAgendaMenu->setItemChecked( (iii+1)*2, false );
     }
     configureAgendaMenu->setItemChecked( (KOPrefs::instance()->mHourSize/2)*2, true );
 }
 void MainWindow::configureAgenda( int item )
 {
     if ( KOPrefs::instance()->mHourSize == item )
         return;
     KOPrefs::instance()->mHourSize=item;
     mView->viewManager()->agendaView()->updateConfig();
 }
 
 void  MainWindow::saveCalendar()
 {
-    QString fn =  KOPrefs::instance()->mLastSaveFile;
-    fn =  KFileDialog::getSaveFileName( fn, i18n("Save backup filename"), this );
 
-    if ( fn == "" )
-        return;
-    QFileInfo info;
-    info.setFile( fn );
-    QString mes;
-    bool createbup = true;
-    if ( info. exists() ) {
-        mes =  i18n("Backup file\nalready exists!\nOld backup file from:\n%1\nOverwrite?\n").arg(KGlobal::locale()->formatDateTime(info.lastModified (), true, false )) ;
-        int result = QMessageBox::warning( this, i18n("KO/Pi: Warning!"),mes,
-                                           i18n("Overwrite!"), i18n("Cancel"), 0,
-                                           0, 1 );
-        if ( result != 0 ) {
-            createbup = false;
-        }
-    }
-    if ( createbup ) {
-        mView->saveCalendar( fn );
-        mes = i18n("KO/Pi:Saved %1").arg(fn);
-        KOPrefs::instance()->mLastSaveFile = fn;
-        setCaption(mes);
-    }
+    QString bupDir = KPimGlobalPrefs::instance()->mBackupDatadir;
+    if ( KPimGlobalPrefs::instance()->mBackupUseDefaultDir)
+        bupDir = KGlobalSettings::backupDataDir();
+    bupDir = KGlobal::formatMessage ( bupDir, 0 );
+    QString bupHint;
+    if ( !KPimGlobalPrefs::instance()->mBackupEnabled )
+        bupHint = i18n("(Hint: You can enable automatic backup in the global settings!)");
+    if ( KMessageBox::warningContinueCancel( this,  i18n("This will <b>backup all calendar files</b> to the directory %1 %2").arg(bupDir).arg(bupHint),i18n("Information") ) != KMessageBox::Continue ) return;
+    backupAllFiles();
 }
 void  MainWindow::loadCalendar()
 {
 
+   
+#if 0
     QString fn =   KOPrefs::instance()->mLastLoadFile;
     fn =  KFileDialog::getOpenFileName( fn, i18n("Load backup filename"), this );
 
     if ( fn == "" )
         return;
     QFileInfo info;
     info.setFile( fn );
     QString mess;
     bool loadbup = true;
     if ( info. exists() ) {
         mess =   i18n("Backup file from:\n%1\nLoading  backup\nfile will delete\nyour current Data!\n").arg(KGlobal::locale()->formatDateTime(info.lastModified (), true, false ));
         int result = QMessageBox::warning( this, "KO/Pi: Warning!",
                                            mess,
                                            i18n("Load!"), i18n("Cancel"), 0,
                                            0, 1 );
         if ( result != 0 ) {
             loadbup = false;
         }
     } else {
         QMessageBox::warning( this, i18n("KO/Pi: Warning!"),
                               i18n("Backup file\ndoes not exist!\nNothing loaded!"), 0, 0,
                               0, 1 );
 
         return;
     }
     if ( loadbup ) {
         mView->openCalendar( fn );
         KOPrefs::instance()->mLastLoadFile = fn;
         mess = i18n("KO/Pi:Loaded %1").arg(fn) ;
         setCaption(mess);
     }
+#endif
 
 }
 void  MainWindow::quickImportIcal()
 {
     importFile( KOPrefs::instance()->mLastImportFile, false );
 }
 void MainWindow::importFile( QString  fn, bool quick )
 {
     QFileInfo info;
     info.setFile( fn );
     QString mess;
     bool loadbup = true;
     if ( !info. exists() ) {
         mess =  i18n("Import file \n...%1\ndoes not exist!\nNothing imported!\n").arg(fn.right( 30));
         int result = QMessageBox::warning( this, i18n("KO/Pi: Warning!"),
                                            mess );
         return;
     }
     int result = 0;
     if ( !quick ) {
         mess = i18n(  "Import file \n...%1\nfrom:\n%2\nDuplicated entries\nwill not be imported!\n").arg(fn.right( 25)).arg(KGlobal::locale()->formatDateTime(info.lastModified (), true, false ));
         result = QMessageBox::warning( this, "KO/Pi: Warning!",
                                        mess,
                                        "Import", "Cancel", 0,
                                        0, 1 );
     }
     if ( result == 0 ) {
         if ( mView->openCalendar( fn, true )) {
             KOPrefs::instance()->mLastImportFile = fn;
             setCaption(i18n("Imported file successfully"));
         } else {
             setCaption(i18n("Error importing file"));
         }
     }
 }
 
 void   MainWindow::importIcal()
 {
 
     QString fn =KOPrefs::instance()->mLastImportFile;
 
     fn =KFileDialog:: getOpenFileName( fn, i18n("Import filename(*.ics/*.vcs)"), this );
     if ( fn == "" )
         return;
     importFile(  fn, true );
 
 }
 
diff --git a/korganizer/mainwindow.h b/korganizer/mainwindow.h
index 9a8bc7f..c9817c3 100644
--- a/korganizer/mainwindow.h
+++ b/korganizer/mainwindow.h
@@ -36,96 +36,97 @@ class MainWindow : public QMainWindow
 {
     Q_OBJECT
   public:
     MainWindow( QWidget *parent = 0, const char *name = 0, QString command = "");
     ~MainWindow();
     bool beamReceiveEnabled();
     static  QString defaultFileName();
     static  QString syncFileName();
     static QString resourcePath();
  public  slots:  
     void setUsesBigPixmaps ( bool );
     void setCaption ( const QString & );
     void updateWeekNum(const KCal::DateList &);
     void updateWeek(QDate);
     void updateFilterToolbar();
     virtual void showMaximized (); 
      void configureAgenda( int );
     void recieve( const QCString& msg, const QByteArray& data );
  protected slots:  
     void setCaptionToDates();
     void weekAction();
     void about(); 
     void licence(); 
     void faq(); 
     void usertrans(); 
     void features(); 
     void synchowto();   
     void storagehowto();   
     void timetrackinghowto();   
     void kdesynchowto();   
     void multisynchowto();   
     void whatsNew();    
     void keyBindings();
     void aboutAutoSaving();;
     void aboutKnownBugs();
 
     void processIncidenceSelection( Incidence * );
 
     void importQtopia();
     void importBday();
     void importOL();
     void importIcal();
     void importFile( QString, bool );
     void quickImportIcal();
     
     void slotModifiedChanged( bool );
     
     void save();
+    void backupAllFiles();
     void saveStopTimer();
     void configureToolBar( int );
     void printSel();
     void printCal();
     void printListView();
     void saveCalendar();
     void loadCalendar();
     void exportVCalendar();
     void fillFilterMenu();
     void fillFilterMenuTB();
     void selectFilter( int );
     void fillFilterMenuPopup();
     void selectFilterPopup( int );
     void exportToPhone( int );
     void toggleBeamReceive();
     void disableBR(bool);
  signals:
     void selectWeek ( int ); 
   private slots:
     void showConfigureAgenda();
     void getFile( bool );
     void syncFileRequest();
     
   protected:
     void hideEvent ( QHideEvent * );
     QString sentSyncFile();
     void displayText( QString, QString);
     void enableIncidenceActions( bool );
     
   private:
     bool mBRdisabled;
 #ifndef DESKTOP_VERSION
     QCopChannel* infrared;
 #endif
     QAction* brAction; 
     KSyncManager* mSyncManager;
     bool mClosed;
     void saveOnClose();
     bool  mFlagKeyPressed;
     bool  mBlockAtStartup;
     QPEToolBar *iconToolBar;
     QPEToolBar *viewToolBar;
     QPEToolBar *navigatorToolBar;
     QPEToolBar *filterToolBar;
     QMenuBar *filterMenubar;
     QPopupMenu * filterPopupMenu;
     void initActions();
     void setDefaultPreferences();