sync fixes

1 files changed, 6 insertions, 4 deletions

diff --git a/korganizer/mainwindow.cpp b/korganizer/mainwindow.cpp
index 8e2f956..10cb2a2 100644
--- a/korganizer/mainwindow.cpp
+++ b/korganizer/mainwindow.cpp
@@ -1735,868 +1735,870 @@ void  MainWindow::saveCalendar()
     info.setFile( fn );
     QString mes;
     bool createbup = true;
     if ( info. exists() ) {
         mes =  i18n("Backup file\nalready exists!\nOld backup file from:\n%1\nOverwrite?\n").arg(KGlobal::locale()->formatDateTime(info.lastModified (), true, false )) ;
         int result = QMessageBox::warning( this, i18n("KO/Pi: Warning!"),mes,
                                            i18n("Overwrite!"), i18n("Cancel"), 0,
                                            0, 1 );
         if ( result != 0 ) {
             createbup = false;
         }
     }
     if ( createbup ) {
         mView->saveCalendar( fn );
         mes = i18n("KO/Pi:Saved %1").arg(fn);
         KOPrefs::instance()->mLastSaveFile = fn;
         setCaption(mes);
     }
 }
 void  MainWindow::loadCalendar()
 {
 
     QString fn =   KOPrefs::instance()->mLastLoadFile;
     fn =  KFileDialog::getOpenFileName( fn, i18n("Load backup filename"), this );
 
     if ( fn == "" )
         return;
     QFileInfo info;
     info.setFile( fn );
     QString mess;
     bool loadbup = true;
     if ( info. exists() ) {
         mess =   i18n("Backup file from:\n%1\nLoading  backup\nfile will delete\nyour current Data!\n").arg(KGlobal::locale()->formatDateTime(info.lastModified (), true, false ));
         int result = QMessageBox::warning( this, "KO/Pi: Warning!",
                                            mess,
                                            i18n("Load!"), i18n("Cancel"), 0,
                                            0, 1 );
         if ( result != 0 ) {
             loadbup = false;
         }
     } else {
         QMessageBox::warning( this, i18n("KO/Pi: Warning!"),
                               i18n("Backup file\ndoes not exist!\nNothing loaded!"), 0, 0,
                               0, 1 );
 
         return;
     }
     if ( loadbup ) {
         mView->openCalendar( fn );
         KOPrefs::instance()->mLastLoadFile = fn;
         mess = i18n("KO/Pi:Loaded %1").arg(fn) ;
         setCaption(mess);
     }
 
 }
 void  MainWindow::quickImportIcal()
 {
     importFile( KOPrefs::instance()->mLastImportFile, false );
 }
 void MainWindow::importFile( QString  fn, bool quick )
 {
     QFileInfo info;
     info.setFile( fn );
     QString mess;
     bool loadbup = true;
     if ( !info. exists() ) {
         mess =  i18n("Import file \n...%1\ndoes not exist!\nNothing imported!\n").arg(fn.right( 30));
         int result = QMessageBox::warning( this, i18n("KO/Pi: Warning!"),
                                            mess );
         return;
     }
     int result = 0;
     if ( !quick ) {
         mess = i18n(  "Import file \n...%1\nfrom:\n%2\nDuplicated entries\nwill not be imported!\n").arg(fn.right( 25)).arg(KGlobal::locale()->formatDateTime(info.lastModified (), true, false ));
         result = QMessageBox::warning( this, "KO/Pi: Warning!",
                                        mess,
                                        "Import", "Cancel", 0,
                                        0, 1 );
     }
     if ( result == 0 ) {
         if ( mView->openCalendar( fn, true )) {
             KOPrefs::instance()->mLastImportFile = fn;
             setCaption(i18n("Imported file successfully"));
         } else {
             setCaption(i18n("Error importing file"));
         }
     }
 }
 
 void   MainWindow::importIcal()
 {
 
     QString fn =KOPrefs::instance()->mLastImportFile;
 
     fn =KFileDialog:: getOpenFileName( fn, i18n("Import filename(*.ics/*.vcs)"), this );
     if ( fn == "" )
         return;
     importFile(  fn, true );
 
 }
 
 void MainWindow::exportVCalendar()
 {
     QString fn =  KOPrefs::instance()->mLastVcalFile;
     fn =  KFileDialog::getSaveFileName( fn, i18n("Export vcal filename(*.vcs)"), this );
     if ( fn == "" )
         return;
     QFileInfo info;
     info.setFile( fn );
     QString mes;
     bool createbup = true;
     if ( info. exists() ) {
         mes = i18n("Save file\nalready exists!\nOld save file from:\n%1\nOverwrite?\n").arg (KGlobal::locale()->formatDateTime(info.lastModified (), true, false ) );
         int result = QMessageBox::warning( this, i18n("KO/Pi: Warning!"),mes,
                                            i18n("Overwrite!"), i18n("Cancel"), 0,
                                            0, 1 );
         if ( result != 0 ) {
             createbup = false;
         }
     }
     if ( createbup ) {
         if ( mView->exportVCalendar( fn ) ) {
             KOPrefs::instance()->mLastVcalFile = fn;
             if ( fn.length() > 20 )
                 mes = i18n("KO/Pi:Exported to ...%1").arg(fn.right(20)) ;
             else
                 mes = i18n("KO/Pi:Exported to %1").arg(fn );
             setCaption(mes);
         }
     }
 
 }
 QString  MainWindow::getPassword( )
 {
     QString retfile = "";
     QDialog dia ( this, "input-dialog", true );
     QLineEdit lab ( &dia );
     lab.setEchoMode( QLineEdit::Password );
     QVBoxLayout lay( &dia );
     lay.setMargin(7);
     lay.setSpacing(7);
     lay.addWidget( &lab);
     dia.setFixedSize( 230,50 );
     dia.setCaption( i18n("Enter password") );
     QPushButton pb ( "OK",  &dia);
     lay.addWidget( &pb );
     connect(&pb, SIGNAL( clicked() ), &dia, SLOT ( accept() ) );
     dia.show();
     int res = dia.exec();
     if ( res )
         retfile = lab.text();
     dia.hide();
     qApp->processEvents();
     return retfile;
 
 }
 
 void MainWindow::enableQuick()
 {
     QString passWordPiSync = "bhdrvmk";
     QString retfile = "";
     QDialog dia ( this, "input-dialog", true );
     QLineEdit lab ( &dia );
     QVBoxLayout lay( &dia );
     lab.setText( KOPrefs::instance()->mPassiveSyncPort );
     lay.setMargin(7);
     lay.setSpacing(7);
     QLabel label ( i18n("Port number (Default: 9197)"), &dia );
     lay.addWidget( &label);
     lay.addWidget( &lab);
 
     QLineEdit lepw ( &dia );
     lepw.setText( "abc" );
     QLabel label2 ( i18n("Password to enable\naccess from remote:"), &dia );
     lay.addWidget( &label2);
     lay.addWidget( &lepw);
     dia.setFixedSize( 230,80 );
     dia.setCaption( i18n("Enter port for Pi-Sync") );
     QPushButton pb ( "OK",  &dia);
     lay.addWidget( &pb );
     connect(&pb, SIGNAL( clicked() ), &dia, SLOT ( accept() ) );
     dia.show();
     int res = dia.exec();
     if ( res )
         retfile = lab.text();
     else
         return;
     dia.hide();
     passWordPiSync = lepw.text();
     qApp->processEvents();
     KOPrefs::instance()->mPassiveSyncPort = retfile;
     bool ok;
     Q_UINT16 port = retfile.toUInt(&ok);
     if ( ! ok ) {
         KMessageBox::information( this, i18n("No valid port"));
         return;
     }
     qDebug("port %d ", port);
     mServerSocket = new KServerSocket ( passWordPiSync, port ,1 );
     qDebug("connected ");
     if ( !mServerSocket->ok() ) {
         qWarning("Failed to bind to port %d", port);
         delete mServerSocket;
         mServerSocket = 0;
         return;
     }
     connect( mServerSocket, SIGNAL ( sendFile(QSocket*) ), this, SLOT  ( sendFile(QSocket*) ) );
     connect( mServerSocket, SIGNAL ( getFile(QSocket*) ), this, SLOT  ( getFile(QSocket*) ) );
 }
 void MainWindow::sendFile(QSocket* socket)
 { 
     setCaption( i18n("Received request for file") );
     qDebug("MainWindow::sendFile(QSocket* s) ");
     if ( mSyncActionDialog )
         delete mSyncActionDialog;
     mSyncActionDialog = new QDialog ( this, "input-dialog", true );
     mSyncActionDialog->setCaption(i18n("KO/Pi - WARNING"));
     QLabel* label = new QLabel( i18n("Synchronizing...\nDo not use\nthis application!\n"), mSyncActionDialog );
     QVBoxLayout* lay = new QVBoxLayout( mSyncActionDialog );
     lay->addWidget( label);
     lay->setMargin(7);
     lay->setSpacing(7);
     mSyncActionDialog->setFixedSize( 200,100 );
     mSyncActionDialog->show();
     qDebug("saving ... ");
     save();
     qApp->processEvents();
     QString fileName = defaultFileName();
     QFile file( fileName );
     if (!file.open( IO_ReadOnly ) ) {
         setCaption( i18n("Error open file") );
         delete mSyncActionDialog;
         mSyncActionDialog = 0;
         qDebug("error open cal file ");
         return ;
                     
     } 
     setCaption( i18n("Sending file...") );
     QTextStream ts( &file );
     ts.setCodec( QTextCodec::codecForName("utf8") );
     QTextStream os( socket );
     os.setCodec( QTextCodec::codecForName("utf8") );
     //os.setEncoding( QTextStream::UnicodeUTF8 );
     while ( ! ts.atEnd() ) {
         os << ts.readLine() << "\n";
     }
     //os << ts.read();
     socket->close();
     file.close();
     setCaption( i18n("File sent. Waiting to get back synced file") );
     qDebug("file sent ");
 } 
 void MainWindow::getFile(QSocket* socket)
 {
     setCaption( i18n("Receiving synced file...") );
    
     piTime.start();
     piSocket = socket;
     piFileString = "";
     QTimer::singleShot( 1, this , SLOT (readBackFileFromSocket( ) ));
 
 
 } 
 void MainWindow::readBackFileFromSocket()
 {
     qDebug("readBackFileFromSocket() %d ", piTime.elapsed ());
     while ( piSocket->canReadLine ()  ) {
         piTime.restart();
         QString line = piSocket->readLine ();
         piFileString += line;
         qDebug("readline: %s ", line.latin1());
         setCaption( i18n("Received %1 bytes").arg( piFileString.length()  ) );
 
     }
     if ( piTime.elapsed () < 3000 ) {
         // wait for more 
         qDebug("waitformore ");
         QTimer::singleShot( 100, this , SLOT (readBackFileFromSocket( ) ));
         return;
     }
     QString fileName = defaultFileName();
     QFile file ( fileName );
     if (!file.open( IO_WriteOnly ) ) {
         setCaption( i18n("Error open file for writing!") );
         delete mSyncActionDialog;
         mSyncActionDialog = 0;
         qDebug("error open cal file ");
         piFileString = "";
         return ;
                     
     } 
 
     mView->setLoadedFileVersion(QDateTime::currentDateTime().addSecs( -1));
     QTextStream ts ( &file );
     ts.setCodec( QTextCodec::codecForName("utf8") );
     qDebug("finish ");
     setCaption( i18n("Writing file to disk...") );
     ts << piFileString;
     setCaption( i18n("File received - reloading calendar...") );
     piSocket->close();
     file.close();  
     mView->watchSavedFile();
     mView->openCalendar( defaultFileName() );
     setCaption( i18n("Pi-Sync successful!") );
     delete mSyncActionDialog;
     mSyncActionDialog = 0;
     piFileString = "";
 
  
 }
 void MainWindow::endConnect()
 {
     setCaption( i18n("No file received - syncing successful") );
     delete mSyncActionDialog;
     mSyncActionDialog = 0;
 }
 void MainWindow::performQuick()
 {
  
     setCaption( i18n("Please input connection settings") );
     QString retfile = "";
     QDialog dia ( this, "input-dialog", true );
     QLineEdit lab ( &dia );
     QVBoxLayout lay( &dia );
     QLabel label ( i18n("IP address\n(Example: 192.168.0.40)"), &dia );
     lay.addWidget( &label);
     lab.setText( KOPrefs::instance()->mActiveSyncIP );
     lay.setMargin(7);
     lay.setSpacing(7);
     lay.addWidget( &lab);
     QLabel label2 ( i18n("Port number (Default: 9197)"), &dia );
     lay.addWidget( &label2);
     QLineEdit lab2 ( &dia ); 
     lab2.setText( KOPrefs::instance()->mActiveSyncPort );
     lay.addWidget( &lab2);
 
     QLineEdit lepw ( &dia );
     lepw.setText( mPassWordPiSync );
     QLabel label3 ( i18n("Password to enable\naccess to remote:"), &dia );
     lay.addWidget( &label3);
     lay.addWidget( &lepw);
 
     dia.setFixedSize( 230,200 );
     dia.setCaption( i18n("Enter port for Pi-Sync ") );
     QPushButton pb ( "OK",  &dia);
     lay.addWidget( &pb );
     connect(&pb, SIGNAL( clicked() ), &dia, SLOT ( accept() ) );
     dia.show();
     int res = dia.exec();
     if ( !res ) {
         setCaption( i18n("Syncing cancelled!") );
         return;
     }
     mPassWordPiSync = lepw.text();
     dia.hide();
     KOPrefs::instance()->mActiveSyncPort = lab2.text();
     KOPrefs::instance()->mActiveSyncIP = lab.text();
     qApp->processEvents();
     performQuickQuick();
 }
 
 void MainWindow::performQuickQuick()
 {
     // setCaption( i18n("") );
    
     bool ok;
     Q_UINT16 port = KOPrefs::instance()->mActiveSyncPort.toUInt(&ok);
     if ( ! ok ) {
         setCaption( i18n("Sorry, no valid port.Syncing cancelled.") );
         return;
     }
     if ( !mCommandSocket ) {
         mCommandSocket = new QSocket( this );
     // delete mCommandSocket;
     //mCommandSocket = new QSocket( this );
         connect( mCommandSocket, SIGNAL(readyRead()), this, SLOT(readFileFromSocket()) );
         connect( mCommandSocket, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteCommandSocket()) );
     }
     QString host = KOPrefs::instance()->mActiveSyncIP;
     mCommandSocket->connectToHost( host, port ); 
     QTextStream os( mCommandSocket );
     os.setEncoding( QTextStream::UnicodeUTF8 );
     os << "GET " << mPassWordPiSync << "\r\n";
     setCaption( i18n("Sending request for remote file ...") );
-    mTimerCommandSocket->start( 15000 );
+    mTimerCommandSocket->start( 10000 );
 
 }
 void MainWindow::deleteCommandSocket()
 {
     if ( !mCommandSocket)
         return;
     if ( mTimerCommandSocket->isActive () ) {
       KMessageBox::information( 0, i18n("ERROR:\nConnection to remote host timed out "));
       mTimerCommandSocket->stop();
     }
+    //KMessageBox::information( 0, i18n("MainWindow::deleteCommandSocket "));
     qDebug("MainWindow::deletemCommandSocket() ");
    delete mCommandSocket;
    mCommandSocket = 0; 
 }
 void MainWindow::deleteCommandSocketFinish()
 {
     if ( ! mCommandSocketFinish)
         return;
     //KMessageBox::information( 0, i18n("MainWindow::deleteCommandSocketFinish() "));
     qDebug("MainWindow::deletemCommandSocketFinish() ");
    delete mCommandSocketFinish;
    mCommandSocketFinish = 0; 
 }
 void MainWindow::readFileFromSocket()
 {
     mTimerCommandSocket->stop();
     setCaption( i18n("Receiving remote file ...") );
     qDebug("MainWindow::readFileFromSocket() ");
     QString fileName;
 #ifdef _WIN32_
     fileName = defaultFileName() +"sync";
 #else
     fileName = "/tmp/kopitempfile.ics";
 #endif
     QFile file( fileName );
     if (!file.open( IO_WriteOnly ) ) {
         setCaption( i18n("Error: Cannot open temp file for write.") );
         qDebug("Error open temp calender file for writing: %s",fileName.latin1() );
         return ;
     } 
     
     //QTextStream os2( mCommandSocket );
     //os2.setEncoding( QTextStream::UnicodeUTF8 );
 
     QTextStream ts( &file );
     ts.setCodec( QTextCodec::codecForName("utf8") ); 
     bool first = true; 
     while ( mCommandSocket->canReadLine () || first) {
         first = false;
         while ( mCommandSocket->canReadLine () ) {
             ts <<   mCommandSocket->readLine ();
         } 
         QTime ti;
         ti.start();
-        while ( ti.elapsed () < 5000  && !mCommandSocket->canReadLine () ) {
+        while ( ti.elapsed () < 3000  && !mCommandSocket->canReadLine () ) {
             qApp->processEvents();
             qDebug("waiting2 %d ",ti.elapsed () );
             if ( !mCommandSocket->canReadLine () )
                 mCommandSocket->waitForMore ( 100 );
         }
         //mCommandSocket->waitForMore ( 5000 );
     }
     file.close();  
     mCommandSocket->close();
     if ( mCommandSocket->state() == QSocket::Idle )
         deleteCommandSocket();
     // pending: deleting after signal  SIGNAL(delayedCloseFinished())
     //delete mCommandSocket;
     setCaption( i18n("Remote file saved to temp file.") );
     //mCommandSocket = 0;
     mCurrentSyncProfile = 2 ; // last file
     mView->setSyncDevice(KOPrefs::instance()->mSyncProfileNames[mCurrentSyncProfile] );
     mView->setSyncName( KOPrefs::instance()->mLocalMachineName );
     KConfig config ( locateLocal( "config","ksyncprofilesrc"  ) );
     KSyncProfile* temp = new KSyncProfile ();
     temp->setName(KOPrefs::instance()->mSyncProfileNames[mCurrentSyncProfile]);
     temp->readConfig(&config);
     KOPrefs::instance()->mAskForPreferences = temp->getAskForPreferences();
     KOPrefs::instance()->mSyncAlgoPrefs = temp->getSyncPrefs();
     KOPrefs::instance()->mWriteBackFile = temp->getWriteBackFile();
     KOPrefs::instance()->mWriteBackExistingOnly = temp->getWriteBackExisting();
     KOPrefs::instance()->mWriteBackInFuture = 0;
     if ( temp->getWriteBackFuture() )
         KOPrefs::instance()->mWriteBackInFuture =  temp->getWriteBackFutureWeeks( );
     KOPrefs::instance()->mShowSyncSummary = temp->getShowSummaryAfterSync();
     delete temp;
     setCaption( i18n("Remote file saved to temp file.") );
     if ( ! syncWithFile( fileName , true ) ) {
         setCaption( i18n("Syncing failed.") );
         qDebug("Syncing failed ");
         return;
     }
 
     if ( !mCommandSocketFinish ) {
         mCommandSocketFinish  = new QSocket( this );
         connect( mCommandSocketFinish, SIGNAL(delayedCloseFinished ()), this, SLOT(deleteCommandSocketFinish()) );
     }
     mCommandSocketFinish->connectToHost( KOPrefs::instance()->mActiveSyncIP, KOPrefs::instance()->mActiveSyncPort.toUInt() ); 
 
     // pending connect signals connected () and error to new slots
     QString host = KOPrefs::instance()->mActiveSyncIP;
     QFile file2( fileName );
     if (!file2.open( IO_ReadOnly ) ) {
         setCaption( i18n("Error: Cannot open temp file for read.") );
         qDebug("error open cal file ");
         return ;
                     
     } 
-    setCaption( i18n("Sending back synced file...") );
     QTextStream ts2( &file2 );
     ts2.setCodec( QTextCodec::codecForName("utf8") );
     QTextStream os2( mCommandSocketFinish );
     os2.setCodec( QTextCodec::codecForName("utf8") );
     //os.setEncoding( QTextStream::UnicodeUTF8 );
     if ( KOPrefs::instance()->mWriteBackFile ) {
+    setCaption( i18n("Sending back synced file...") );
         os2 << "PUT " << mPassWordPiSync << "\r\n";;
         while ( ! ts2.atEnd() ) {
            os2 << ts2.readLine() << "\n";
         }
     } else {
         os2 << "STOP\r\n";
     }
     mCommandSocketFinish->close();
     if ( mCommandSocketFinish->state() == QSocket::Idle )
-        deleteCommandSocketFinish();
+        QTimer::singleShot( 10, this , SLOT ( deleteCommandSocketFinish()));
     file.close();
     qDebug("Syncing succesful! ");
     setCaption( i18n("Pi-Sync succesful!") );
 
+    // KMessageBox::information( 0, i18n(" Pi-Sync succesful! "));
 
 }
 
 void MainWindow::syncLocalFile()
 {
 
     QString fn =KOPrefs::instance()->mLastSyncedLocalFile;
 
     fn =KFileDialog:: getOpenFileName( fn, i18n("Sync filename(*.ics/*.vcs)"), this );
     if ( fn == "" )
         return;
     //mView->setSyncDevice("local-file" );
     if (  syncWithFile(  fn, false ) ) {
        //  Event* e = mView->getLastSyncEvent();
 //         e->setReadOnly( false );
 //         e->setLocation( i18n("Local file: ")+ KOPrefs::instance()->mLastSyncedLocalFile);
 //         e->setReadOnly( true );
     }
 
 }
 
 bool  MainWindow::syncWithFile( QString fn , bool quick )
 {
     bool ret = false;
     QFileInfo info;
     info.setFile( fn );
     QString mess;
     bool loadbup = true;
     if ( !info. exists() ) {
         mess =  i18n( "Sync file \n...%1\ndoes not exist!\nNothing synced!\n").arg(fn.right( 30) );
         int result = QMessageBox::warning( this, i18n("KO/Pi: Warning!"),
                                            mess );
         return ret;
     }
     int result = 0;
     if ( !quick ) {
         mess =  i18n("Sync with file \n...%1\nfrom:\n%2\n").arg(fn.right( 25)).arg(KGlobal::locale()->formatDateTime(info.lastModified (), true, false ));
         result = QMessageBox::warning( this, i18n("KO/Pi: Warning!"),
                                        mess,
                                        i18n("Sync"), i18n("Cancel"), 0,
                                        0, 1 );
         if ( result )
             return false;
     }
     if ( KOPrefs::instance()->mAskForPreferences )
         mView->edit_sync_options();
     if ( result == 0 ) {
         //qDebug("Now sycing ... ");
         if ( ret = mView->syncCalendar( fn, KOPrefs::instance()->mSyncAlgoPrefs ) )
             setCaption( i18n("Synchronization successful") );
         else
             setCaption( i18n("Sync cancelled or failed. Nothing synced.") );
         if ( ! quick )
             KOPrefs::instance()->mLastSyncedLocalFile = fn;
         slotModifiedChanged( true );
     }
     return ret;
 }
 void MainWindow::quickSyncLocalFile()
 {
     //mView->setSyncDevice("local-file" );
     //qDebug("quickSyncLocalFile() ");
     if ( syncWithFile( KOPrefs::instance()->mLastSyncedLocalFile, false ) ) {
        //  Event* e = mView->getLastSyncEvent();
 //         e->setReadOnly( false );
 //         e->setLocation( i18n("Quick with file: ")+ KOPrefs::instance()->mLastSyncedLocalFile);
 //         e->setReadOnly( true );
 
     }
 }
 
 void MainWindow::confSync()
 {
     mView->confSync();
     fillSyncMenu();
 }
 void MainWindow::syncRemote( KSyncProfile* prof,  bool ask)
 {
     QString question;
     if ( ask ) {
     question = i18n("Do you really want\nto remote sync\nwith profile \n")+ prof->getName()+" ?\n";
     if ( QMessageBox::information( this, i18n("KO/Pi Sync"),
                                    question,
                                    i18n("Yes"), i18n("No"),
                                    0, 0 ) != 0 )
         return;
     }
     QString command = prof->getPreSyncCommand();
     int fi;
     if ( (fi = command.find("$PWD$")) > 0 ) {
         QString pwd = getPassword();
         command = command.left( fi )+ pwd + command.mid( fi+5 );
 
     }
     int maxlen = 30;
     if ( QApplication::desktop()->width() > 320 )
         maxlen += 25;
     setCaption ( i18n( "Copy remote file to local machine..." ) );
     int fileSize = 0;
     int result = system ( command );
     // 0 : okay
     // 256: no such file or dir
     //
     qDebug("KO: Remote copy result(0 = okay): %d ",result );
     if ( result != 0 ) {
         int len = maxlen;
         while ( len <  command.length() ) {
             command.insert( len , "\n" );
             len += maxlen +2;
         }
         question = i18n("Sorry, the copy command failed!\nCommand was:\n%1\n \nTry command on console to get more\ndetailed info about the reason.\n").arg (command) ;
         QMessageBox::information( this, i18n("KO/Pi Sync - ERROR"),
                                   question,
                                   i18n("Okay!")) ;
         setCaption ("KO/Pi");
         return;
     }
     setCaption ( i18n( "Copying succeed." ) );
     //qDebug(" file **%s** ",prof->getLocalTempFile().latin1() );
     if ( syncWithFile( prof->getLocalTempFile(), true ) ) {
 //         Event* e = mView->getLastSyncEvent();
 //         e->setReadOnly( false );
 //         e->setLocation( KOPrefs::instance()->mSyncProfileNames[mCurrentSyncProfile]);
 //         e->setReadOnly( true );
         if ( KOPrefs::instance()->mWriteBackFile ) {
             command =  prof->getPostSyncCommand(); 
             int fi;
             if ( (fi = command.find("$PWD$")) > 0 ) {
                 QString pwd = getPassword();
                 command = command.left( fi )+ pwd + command.mid( fi+5 );
                 
             }
             setCaption ( i18n( "Writing back file ..." ) );
             result = system ( command );
             qDebug("KO: Writing back file result: %d ", result);
             if ( result != 0 ) {
                 setCaption ( i18n( "Writing back file result: " )+QString::number( result ) );
                 return;
             } else {
                 setCaption ( i18n( "Syncronization sucessfully completed" ) );
             }
         }
     }
     return;
 }
 void MainWindow::syncSSH()
 {
     // not used anymore
     QTime timer;
     timer.start();
     //qDebug("MainWindow::syncssh() ");
     KOPrefs *p = KOPrefs::instance();
     QString localFile =  p->mLocalTempFile;
     QString remoteIP = p->mRemoteIP;
     QString remoteUser = p->mRemoteUser;
     QString remoteFile = p->mRemoteFile;
     if ( p->mUsePassWd &&  p->mRemotePassWd.length() > 0  )
         remoteUser += ":" + p->mRemotePassWd;
 
     QString question = i18n("Do you really want\nto remote sync?\n \n") +
         i18n("IP: " ) +remoteIP  +"\n" +
         i18n("User: " ) + remoteUser +"\n" ;
     int maxlen = 30;
     if ( QApplication::desktop()->width() > 320 )
         maxlen += 25;
     if ( remoteFile.length() > maxlen )
         question  +=   i18n("Remote file:\n..." ) + remoteFile.right(maxlen) +"\n";
     else
         question  +=   i18n("Remote file:\n " ) + remoteFile +"\n";
     if ( localFile.length() > maxlen )
         question  +=   i18n("Local temp file:\n..." ) + localFile.right(maxlen) +"\n";
     else
         question  +=   i18n("Local temp file:\n " ) + localFile +"\n";
 
     if ( QMessageBox::information( this, i18n("KO/Pi Sync"),
                                    question,
                                    i18n("Yes"), i18n("No"),
                                    0, 0 ) != 0 )
         return;
     // if ( !p->mUsePassWd ) {
     //         QString pass = getPassword();
     //         if ( pass.length() > 0 )
     //             remoteUser += ":" + pass;
     // }
     QString command = "scp " + remoteUser + "@" + remoteIP +":" + remoteFile +"  " +localFile;
     setCaption ( i18n( "Copy remote file to local machine..." ) );
     int fileSize = 0;
     int result = system ( command );
     // 0 : okay
     // 256: no such file or dir
     //
     qDebug("KO: Remote copy result(0 = okay): %d ",result );
     if ( result != 0 ) {
         int len = maxlen;
         while ( len <  command.length() ) {
             command.insert( len , "\n" );
             len += maxlen +2;
         }
         question = i18n("Sorry, the copy command failed!\nCommand was:\n%1\n \nTry command on console to get more\ndetailed info about the reason.\n").arg (command) ;
         QMessageBox::information( this, i18n("KO/Pi Sync - ERROR"),
                                   question,
                                   i18n("Okay!")) ;
         setCaption ("KO/Pi");
         return;
     }
 
 
     setCaption ( i18n( "Copying succeed." ) );
     //mView->setSyncDevice("ssh-scp" );
     if ( syncWithFile(localFile , true ) ) {
 //         Event* e = mView->getLastSyncEvent();
 //         e->setReadOnly( false );
 //         e->setLocation( KOPrefs::instance()->mSyncProfileNames[mCurrentSyncProfile]);
 //         e->setReadOnly( true );
         if ( KOPrefs::instance()->mWriteBackFile ) {
             command = "scp " + localFile +" " +remoteUser + "@" + remoteIP +":" + remoteFile ;
             setCaption ( i18n( "Writing back file ..." ) );
             result = system ( command );
             if ( result != 0 ) {
                 int len = maxlen;
                 while ( len <  command.length() ) {
                     command.insert( len , "\n" );
                     len += maxlen +2;
                 }
                 question = i18n("Sorry, the copy back command failed!\nCommand was:\n%1\n \nTry command on console to get more\ndetailed info about the reason.\n").arg (command) ;
                 QMessageBox::information( this, i18n("KO/Pi Sync - ERROR"),
                                           question,
                                           i18n("Okay!")) ;
                 setCaption ("KO/Pi");
                 return;
             } else {
                 setCaption ( i18n( "Syncronization sucessfully completed" ) );
             }
         }
     }
     return;
 #if 0
     system ("scp zaurus@192.168.0.65:/home/zaurus/Applications/korganizer/mycalendar.ics /home/polo/Applications/korganizer/z_sync.ics");
     while ( timer.elapsed() < 5000 )
         qApp->processEvents();
 
     qDebug("MainWindow::merging) ");
     mView->syncCalendar( "/home/polo/Applications/korganizer/z_sync.ics", 0 );
     while ( mBlockSaveFlag )
         qApp->processEvents();
     save();
     system ("scp /home/polo/Applications/korganizer/mycalendar.ics zaurus@192.168.0.65:/home/zaurus/Applications/korganizer/mycalendar.ics");
 #endif
 
 }
 
 
 void MainWindow::syncSharp()
 {
     if ( mCalendarModifiedFlag )
         save();
     mView->syncSharp();
     slotModifiedChanged( true );
 
 }
 void MainWindow::syncPhone()
 {
     if ( mCalendarModifiedFlag )
         save();
     mView->syncPhone();
     slotModifiedChanged( true );
 
 }
 
 void MainWindow::printSel( )
 {
     mView->viewManager()->agendaView()->agenda()->printSelection();
 }
 
 void MainWindow::printCal()
 {
     mView->print();//mCp->showDialog();
 }
 
 
 
 KServerSocket:: KServerSocket ( QString pw, Q_UINT16 port, int backlog, QObject * parent, const char * name ) : QServerSocket( port, backlog, parent, name )
 {
     mPassWord = pw;
     mSocket = 0;
 };
 
 void KServerSocket::newConnection ( int socket ) 
 {
     qDebug("KServerSocket:New connection %d ", socket); 
     if ( mSocket ) {
         qDebug("KServerSocket::newConnection Socket deleted! ");
         delete mSocket;
         mSocket = 0;
     }
     mSocket = new QSocket( this );
     connect( mSocket , SIGNAL(readyRead()), this, SLOT(readClient()) );
     connect( mSocket , SIGNAL(delayedCloseFinished()), this, SLOT(discardClient()) );
     mSocket->setSocket( socket );
 }
 
 void KServerSocket::discardClient()
 {
     qDebug(" KServerSocket::discardClient()");
     if ( mSocket ) {
         qDebug("delete ");
         delete mSocket;
         mSocket = 0;
     }
     //emit endConnect();
 }
 void KServerSocket::readClient()
 {
     if ( mSocket == 0 ) {
         qDebug("ERROR::KServerSocket::readClient(): mSocket == 0  ");
         return;
     }
     qDebug("KServerSocket readClient()");
     if ( mSocket->canReadLine() ) {
         QStringList tokens = QStringList::split( QRegExp("[ \r\n][ \r\n]*"), mSocket->readLine() );
         qDebug("KServerSocket socket->canReadLine()");
         if ( tokens[0] == "GET" ) {
             if (  tokens[1] == mPassWord )
                 emit sendFile( mSocket );
             else {
                 KMessageBox::information( 0, i18n("ERROR:\nGot send file request\nwith invalid password"));
                 qDebug("password %s, invalid password %s ",mPassWord.latin1(), tokens[1].latin1() );
             }
         } 
         if ( tokens[0] == "PUT" ) {
             if (  tokens[1] == mPassWord )
                 emit getFile( mSocket );
             else {
                 KMessageBox::information( 0, i18n("ERROR:\nGot receive file request\nwith invalid password"));
                 qDebug("password %s, invalid password %s ",mPassWord.latin1(), tokens[1].latin1() );
             }
         } 
         if ( tokens[0] == "STOP" ) {
             emit endConnect();
         }
     }
 }