bugfixes

3 files changed, 10 insertions, 10 deletions

diff --git a/gammu/emb/common/gsmstate.h b/gammu/emb/common/gsmstate.h
index 2b4806c..f15a6a7 100644
--- a/gammu/emb/common/gsmstate.h
+++ b/gammu/emb/common/gsmstate.h
@@ -1,420 +1,419 @@
 /* (c) 2002-2004 by Marcin Wiacek & Michal Cihar */
 
 #ifndef __gsm_state_h
 #define __gsm_state_h
 
 #include <time.h>
 
 #include "config.h"
 #include "misc/cfg.h"
 
 typedef struct _GSM_StateMachine 	GSM_StateMachine;
 typedef struct _GSM_User	 	GSM_User;
 typedef struct _OnePhoneModel	 	OnePhoneModel;
 typedef struct _GSM_Reply_Function	GSM_Reply_Function;
 
 #ifdef GSM_ENABLE_NOKIA3320
 #  include "phone/nokia/dct4/n3320.h"
 #endif
 #ifdef GSM_ENABLE_NOKIA3650
 #  include "phone/nokia/dct4/n3650.h"
 #endif
 #ifdef GSM_ENABLE_NOKIA650
 #  include "phone/nokia/dct3/n0650.h"
 #endif
 #ifdef GSM_ENABLE_NOKIA6110
 #  include "phone/nokia/dct3/n6110.h"
 #endif
 #ifdef GSM_ENABLE_NOKIA6510
 #  include "phone/nokia/dct4/n6510.h"
 #endif
 #ifdef GSM_ENABLE_NOKIA7110
 #  include "phone/nokia/dct3/n7110.h"
 #endif
 #ifdef GSM_ENABLE_NOKIA9210
 #  include "phone/nokia/dct3/n9210.h"
 #endif
 #ifdef GSM_ENABLE_ATGEN
 #  include "phone/at/atgen.h"
 #endif
 #ifdef GSM_ENABLE_ALCATEL
 #  include "phone/alcatel/alcatel.h"
 #endif
 #ifdef GSM_ENABLE_OBEXGEN
 #  include "phone/obex/obexgen.h"
 #endif
 #ifdef GSM_ENABLE_MROUTERGEN
 #  include "phone/symbian/mroutgen.h"
 #endif
 
 #ifndef GSM_USED_MBUS2
 #  undef GSM_ENABLE_MBUS2
 #endif
 #ifndef GSM_USED_FBUS2
 #  undef GSM_ENABLE_FBUS2
 #endif
 #ifndef GSM_USED_FBUS2DLR3
 #  undef GSM_ENABLE_FBUS2DLR3
 #endif
 #ifndef GSM_USED_FBUS2DKU5
 #  undef GSM_ENABLE_FBUS2DKU5
 #endif
 #ifndef GSM_USED_FBUS2PL2303
 #  undef GSM_ENABLE_FBUS2PL2303
 #endif
 #ifndef GSM_USED_FBUS2BLUE
 #  undef GSM_ENABLE_FBUS2BLUE
 #endif
 #ifndef GSM_USED_FBUS2IRDA
 #  undef GSM_ENABLE_FBUS2IRDA
 #endif
 #ifndef GSM_USED_PHONETBLUE
 #  undef GSM_ENABLE_PHONETBLUE
 #endif
 #ifndef GSM_USED_AT
 #  undef GSM_ENABLE_AT
 #endif
 #ifndef GSM_USED_IRDAOBEX
 #  undef GSM_ENABLE_IRDAOBEX
 #endif
 #ifndef GSM_USED_BLUEOBEX
 #  undef GSM_ENABLE_BLUEOBEX
 #endif
 #ifndef GSM_USED_ALCABUS
 #  undef GSM_ENABLE_ALCABUS
 #endif
 #ifndef GSM_USED_IRDAPHONET
 #  undef GSM_ENABLE_IRDAPHONET
 #endif
 #ifndef GSM_USED_BLUEFBUS2
 #  undef GSM_ENABLE_BLUEFBUS2
 #endif
 #ifndef GSM_USED_BLUEPHONET
 #  undef GSM_ENABLE_BLUEPHONET
 #endif
 #ifndef GSM_USED_BLUEAT
 #  undef GSM_ENABLE_BLUEAT
 #endif
 #ifndef GSM_USED_IRDAAT
 #  undef GSM_ENABLE_IRDAAT
 #endif
 #ifndef GSM_USED_MROUTERBLUE
 #  undef GSM_ENABLE_MROUTERBLUE
 #endif
 
 #if defined(GSM_ENABLE_NOKIA3320) || defined(GSM_ENABLE_NOKIA650) || defined(GSM_ENABLE_NOKIA6110) || defined(GSM_ENABLE_NOKIA7110) || defined(GSM_ENABLE_NOKIA9210)
 #  define GSM_ENABLE_NOKIA_DCT3
 #endif
 #if defined(GSM_ENABLE_NOKIA3650) || defined(GSM_ENABLE_NOKIA6510)
 #  define GSM_ENABLE_NOKIA_DCT4
 #endif
 
 #include "protocol/protocol.h"
 #if defined(GSM_ENABLE_FBUS2) || defined(GSM_ENABLE_FBUS2IRDA) || defined(GSM_ENABLE_FBUS2DLR3) || defined(GSM_ENABLE_FBUS2BLUE) || defined(GSM_ENABLE_BLUEFBUS2) || defined(GSM_ENABLE_FBUS2DKU5) || defined(GSM_ENABLE_FBUS2PL2303)
 #  include "protocol/nokia/fbus2.h"
 #endif
 #ifdef GSM_ENABLE_MBUS2
 #  include "protocol/nokia/mbus2.h"
 #endif
 #if defined(GSM_ENABLE_PHONETBLUE) || defined(GSM_ENABLE_IRDAPHONET) || defined(GSM_ENABLE_BLUEPHONET)
 #  include "protocol/nokia/phonet.h"
 #endif
 #if defined(GSM_ENABLE_AT) || defined(GSM_ENABLE_BLUEAT) || defined(GSM_ENABLE_IRDAAT)
 #  include "protocol/at/at.h"
 #endif
 #ifdef GSM_ENABLE_ALCABUS
 #  include "protocol/alcatel/alcabus.h"
 #endif
 #if defined(GSM_ENABLE_IRDAOBEX) || defined(GSM_ENABLE_BLUEOBEX)
 #  include "protocol/obex/obex.h"
 #endif
 #if defined(GSM_ENABLE_MROUTERBLUE)
 #  include "protocol/symbian/mrouter.h"
 #endif
 
 #define GSM_ENABLE_SERIALDEVICE
 #ifndef GSM_USED_SERIALDEVICE
 #  undef GSM_ENABLE_SERIALDEVICE
 #endif
 #define GSM_ENABLE_IRDADEVICE
 #ifndef GSM_USED_IRDADEVICE
 #  undef GSM_ENABLE_IRDADEVICE
 #endif
 #define GSM_ENABLE_BLUETOOTHDEVICE
 #ifndef GSM_USED_BLUETOOTHDEVICE
 #  undef GSM_ENABLE_BLUETOOTHDEVICE
 #endif
 
 #ifdef DJGPP
 #  undef GSM_ENABLE_IRDADEVICE
 #  undef GSM_ENABLE_IRDAPHONET
 #  undef GSM_ENABLE_IRDAOBEX
 #  undef GSM_ENABLE_IRDAAT
 #  undef GSM_ENABLE_FBUS2IRDA
 
 #  undef GSM_ENABLE_BLUETOOTHDEVICE
 #  undef GSM_ENABLE_BLUEPHONET
 #  undef GSM_ENABLE_BLUEOBEX
 #  undef GSM_ENABLE_BLUEAT
 #  undef GSM_ENABLE_BLUEFBUS2
 #  undef GSM_ENABLE_PHONETBLUE
 #  undef GSM_ENABLE_FBUS2BLUE
 #  undef GSM_ENABLE_MROUTERBLUE
 #endif
-
 #ifndef WIN32
 #  ifdef ENABLE_LGPL
 #    undef GSM_ENABLE_IRDADEVICE
 #    undef GSM_ENABLE_IRDAPHONET
 #    undef GSM_ENABLE_IRDAOBEX
 #    undef GSM_ENABLE_IRDAAT
 #    undef GSM_ENABLE_FBUS2IRDA
 
 #    undef GSM_ENABLE_BLUETOOTHDEVICE
 #    undef GSM_ENABLE_BLUEPHONET
 #    undef GSM_ENABLE_BLUEOBEX
 #    undef GSM_ENABLE_BLUEAT
 #    undef GSM_ENABLE_BLUEFBUS2
 #    undef GSM_ENABLE_PHONETBLUE
 #    undef GSM_ENABLE_FBUS2BLUE
 #    undef GSM_ENABLE_MROUTERBLUE
 #  endif
 #endif
 
 #ifdef GSM_ENABLE_SERIALDEVICE
 #  include "device/serial/ser_w32.h"
 #  include "device/serial/ser_unx.h"
 #  include "device/serial/ser_djg.h"
 #endif
 #ifdef GSM_ENABLE_IRDADEVICE
 #  include "device/irda/irda.h"
 #endif
 #ifdef GSM_ENABLE_BLUETOOTHDEVICE
 #  include "device/bluetoth/bluetoth.h"
 #endif
 
 #include "service/gsmpbk.h"
 #include "service/gsmnet.h"
 #include "service/gsmring.h"
 #include "service/gsmcal.h"
 #include "service/gsmdata.h"
 #include "service/gsmlogo.h"
 #include "service/gsmmisc.h"
 #include "service/gsmprof.h"
 #include "service/gsmcall.h"
 #include "service/sms/gsmsms.h"
 #include "service/sms/gsmems.h"
 #include "service/sms/gsmmulti.h"
 #include "service/backup/gsmback.h"
 
 
 /* ------------------------- Device layer ---------------------------------- */
 
 /**
  * Device functions, each device has to provide these.
  */
 typedef struct {
 	/**
 	 * Opens device.
 	 */
 	GSM_Error (*OpenDevice)        (GSM_StateMachine *s);
 	/**
 	 * Closes device.
 	 */
 	GSM_Error (*CloseDevice)       (GSM_StateMachine *s);
 	/**
 	 * Sets parity for device.
 	 */
 	GSM_Error (*DeviceSetParity)   (GSM_StateMachine *s, bool parity);
 	/**
 	 * Sets dtr (data to read) and rts (ready to send) flags.
 	 */
 	GSM_Error (*DeviceSetDtrRts)   (GSM_StateMachine *s, bool dtr, bool rts);
 	/**
 	 * Sets device speed.
 	 */
 	GSM_Error (*DeviceSetSpeed)    (GSM_StateMachine *s, int speed);
 	/**
 	 * Attempts to read nbytes from device.
 	 */
 	int       (*ReadDevice)        (GSM_StateMachine *s, void *buf, size_t nbytes);
 	/**
 	 * Attempts to read nbytes from device.
 	 */
 	int       (*WriteDevice)       (GSM_StateMachine *s, void *buf, size_t nbytes);
 } GSM_Device_Functions;
 
 #ifdef GSM_ENABLE_SERIALDEVICE
 	extern GSM_Device_Functions SerialDevice;
 #endif
 #ifdef GSM_ENABLE_IRDADEVICE
 	extern GSM_Device_Functions IrdaDevice;
 #endif
 #ifdef GSM_ENABLE_BLUETOOTHDEVICE
 	extern GSM_Device_Functions BlueToothDevice;
 #endif
 
 /**
  * Structure containing device specific data and pointer to device functions -
  * @ref GSM_Device_Functions. The data are in a union, so you can use only 
  * one device at one time.
  */
 typedef struct {
 	union {
 		char fake;
 #ifdef GSM_ENABLE_SERIALDEVICE
 		GSM_Device_SerialData		Serial;
 #endif
 #ifdef GSM_ENABLE_IRDADEVICE
 		GSM_Device_IrdaData		Irda;
 #endif
 #ifdef GSM_ENABLE_BLUETOOTHDEVICE
 		GSM_Device_BlueToothData	BlueTooth;
 #endif
 	} Data;
 	GSM_Device_Functions *Functions;
 } GSM_Device;
 
 /* ---------------------- Protocol layer ----------------------------------- */
 
 /**
  * Protocol functions, each protocol has to implement these.
  */
 typedef struct {
 	/**
 	 * Writes message to device.
 	 */
 	GSM_Error (*WriteMessage) (GSM_StateMachine *s, unsigned char *buffer,
 				   int length, unsigned char type);
 	/**
 	 * This one is called when character is received from device.
 	 */
 	GSM_Error (*StateMachine) (GSM_StateMachine *s, unsigned char rx_char);
 	/**
 	 * Protocol initialisation.
 	 */
 	GSM_Error (*Initialise)   (GSM_StateMachine *s);
 	/**
 	 * Protocol termination.
 	 */
 	GSM_Error (*Terminate)    (GSM_StateMachine *s);
 } GSM_Protocol_Functions;
 
 #ifdef GSM_ENABLE_MBUS2
 	extern GSM_Protocol_Functions MBUS2Protocol;
 #endif
 #if defined(GSM_ENABLE_FBUS2) || defined(GSM_ENABLE_FBUS2IRDA) || defined(GSM_ENABLE_FBUS2DLR3) || defined(GSM_ENABLE_FBUS2DKU5) || defined(GSM_ENABLE_FBUS2BLUE) || defined(GSM_ENABLE_BLUEFBUS2) || defined(GSM_ENABLE_FBUS2PL2303)
 	extern GSM_Protocol_Functions FBUS2Protocol;
 #endif
 #if defined(GSM_ENABLE_PHONETBLUE) || defined(GSM_ENABLE_IRDAPHONET) || defined(GSM_ENABLE_BLUEPHONET)
 	extern GSM_Protocol_Functions PHONETProtocol;
 #endif
 #if defined(GSM_ENABLE_AT) || defined(GSM_ENABLE_BLUEAT) || defined(GSM_ENABLE_IRDAAT)
 	extern GSM_Protocol_Functions ATProtocol;
 #endif
 #ifdef GSM_ENABLE_ALCABUS
 	extern GSM_Protocol_Functions ALCABUSProtocol;
 #endif
 #if defined(GSM_ENABLE_IRDAOBEX) || defined(GSM_ENABLE_BLUEOBEX)
 	extern GSM_Protocol_Functions OBEXProtocol;
 #endif
 #if defined(GSM_ENABLE_MROUTERBLUE)
 	extern GSM_Protocol_Functions MROUTERProtocol;
 #endif
 
 /**
  * Structure containing protocol specific data and pointer to protocol
  * functions - @ref GSM_Protocol_Functions. The data are in a structure, so
  * you may use more protocols at once and switch between them.
  */
 typedef struct {
 	struct {
 		char fake;
 #ifdef GSM_ENABLE_MBUS2
 		GSM_Protocol_MBUS2Data		MBUS2;
 #endif
 #if defined(GSM_ENABLE_FBUS2) || defined(GSM_ENABLE_FBUS2IRDA) || defined(GSM_ENABLE_FBUS2DLR3) || defined(GSM_ENABLE_FBUS2DKU5) || defined(GSM_ENABLE_FBUS2PL2303) || defined(GSM_ENABLE_FBUS2BLUE) || defined(GSM_ENABLE_BLUEFBUS2)
 		GSM_Protocol_FBUS2Data		FBUS2;
 #endif
 #if defined(GSM_ENABLE_PHONETBLUE) || defined(GSM_ENABLE_IRDAPHONET) || defined(GSM_ENABLE_BLUEPHONET)
 		GSM_Protocol_PHONETData		PHONET;
 #endif
 #if defined(GSM_ENABLE_AT) || defined(GSM_ENABLE_BLUEAT) || defined(GSM_ENABLE_IRDAAT)
 		GSM_Protocol_ATData		AT;
 #endif
 #ifdef GSM_ENABLE_ALCABUS
 		GSM_Protocol_ALCABUSData	ALCABUS;
 #endif
 #if defined(GSM_ENABLE_IRDAOBEX) || defined(GSM_ENABLE_BLUEOBEX)
 		GSM_Protocol_OBEXData		OBEX;
 #endif
 #if defined(GSM_ENABLE_MROUTERBLUE)
 		GSM_Protocol_MROUTERData	MROUTER;
 #endif
 	} Data;
 	GSM_Protocol_Functions *Functions;
 } GSM_Protocol;
 
 /* -------------------------- Phone layer ---------------------------------- */
 
 /**
  * Phone requests identificators, these are used for internally identifying
  * which operation is being performed.
  */
 typedef enum {
 	ID_None=1,
 	ID_GetModel,
 	ID_GetFirmware,
 	ID_EnableSecurity,
 	ID_GetIMEI,
 	ID_GetDateTime,
 	ID_GetAlarm,
 	ID_GetMemory,
 	ID_GetMemoryStatus,
 	ID_GetSMSC,
 	ID_GetSMSMessage,
 	ID_EnableEcho,
 	ID_EnableErrorInfo,
 	ID_SetOBEX,
 	ID_SetUSSD,
 	ID_GetNote,
 	ID_GetSignalQuality,
 	ID_GetBatteryCharge,
 	ID_GetSMSFolders,
 	ID_GetSMSFolderStatus,
 	ID_GetSMSStatus,
 	ID_AddSMSFolder,
 	ID_GetNetworkInfo,
 	ID_GetRingtone,
 	ID_DialVoice,
 	ID_GetCalendarNotesInfo,
 	ID_GetCalendarNote,
 	ID_GetSecurityCode,
 	ID_GetWAPBookmark,
 	ID_GetBitmap,
 	ID_SaveSMSMessage,
 	ID_CancelCall,
 	ID_SetDateTime,
 	ID_SetAlarm,
 	ID_DisableConnectFunc,
 	ID_EnableConnectFunc,
 	ID_AnswerCall,
 	ID_SetBitmap,
 	ID_SetRingtone,
 	ID_DeleteSMSMessage,
 	ID_DeleteCalendarNote,
 	ID_SetPath,
 	ID_SetSMSC,
 	ID_SetProfile,
 	ID_SetMemory,
 	ID_DeleteMemory,
 	ID_SetCalendarNote,
 	ID_SetIncomingSMS,
 	ID_SetIncomingCB,
 	ID_GetCalendarNotePos,
 	ID_Initialise,
 	ID_GetConnectSet,
 	ID_SetWAPBookmark,
 	ID_GetLocale,
 	ID_SetLocale,
 	ID_GetCalendarSettings,
@@ -1324,256 +1323,257 @@ typedef struct {
 	/**
 	 * Adds file part to filesystem.
 	 */
 	GSM_Error (*AddFilePart)	(GSM_StateMachine *s, GSM_File *File, int *Pos);
 	/**
 	 * Acquires filesystem status.
 	 */
 	GSM_Error (*GetFileSystemStatus)(GSM_StateMachine *s, GSM_FileSystemStatus *Status);
 	/**
 	 * Deletes file from filessytem.
 	 */
 	GSM_Error (*DeleteFile)	 	(GSM_StateMachine *s, unsigned char *ID);
 	/**
 	 * Adds folder to filesystem.
 	 */
 	GSM_Error (*AddFolder)	  	(GSM_StateMachine *s, GSM_File *File);
 	/**
 	 * Gets GPRS access point.
 	 */
 	GSM_Error (*GetGPRSAccessPoint) (GSM_StateMachine *s, GSM_GPRSAccessPoint *point);
 	/**
 	 * Sets GPRS access point.
 	 */
 	GSM_Error (*SetGPRSAccessPoint) (GSM_StateMachine *s, GSM_GPRSAccessPoint *point);
 } GSM_Phone_Functions;
 
 	extern GSM_Phone_Functions NAUTOPhone;
 #ifdef GSM_ENABLE_NOKIA3320
 	extern GSM_Phone_Functions N3320Phone;
 #endif
 #ifdef GSM_ENABLE_NOKIA3650
 	extern GSM_Phone_Functions N3650Phone;
 #endif
 #ifdef GSM_ENABLE_NOKIA6110
 	extern GSM_Phone_Functions N6110Phone;
 #endif
 #ifdef GSM_ENABLE_NOKIA650
 	extern GSM_Phone_Functions N650Phone;
 #endif
 #ifdef GSM_ENABLE_NOKIA6510
 	extern GSM_Phone_Functions N6510Phone;
 #endif
 #ifdef GSM_ENABLE_NOKIA7110
 	extern GSM_Phone_Functions N7110Phone;
 #endif
 #ifdef GSM_ENABLE_NOKIA9210
 	extern GSM_Phone_Functions N9210Phone;
 #endif
 #ifdef GSM_ENABLE_ATGEN
 	extern GSM_Phone_Functions ATGENPhone;
 #endif
 #ifdef GSM_ENABLE_ALCATEL
 	extern GSM_Phone_Functions ALCATELPhone;
 #endif
 #ifdef GSM_ENABLE_OBEXGEN
 	extern GSM_Phone_Functions OBEXGENPhone;
 #endif
 #ifdef GSM_ENABLE_MROUTERGEN
 	extern GSM_Phone_Functions MROUTERGENPhone;
 #endif
 
 typedef struct {
 	GSM_Phone_Data		 Data;
 	GSM_Phone_Functions	*Functions;
 } GSM_Phone;
 
 /* --------------------------- User layer ---------------------------------- */
 
 struct _GSM_User {
 	GSM_Reply_Function		*UserReplyFunctions;
 
 	void	  (*IncomingCall)	(char *Device, GSM_Call	      call);
 	void 	  (*IncomingSMS)	(char *Device, GSM_SMSMessage sms);
 	void 	  (*IncomingCB)		(char *Device, GSM_CBMessage  cb);
 	void 	  (*IncomingUSSD)	(char *Device, char	      *Text);
 	void 	  (*SendSMSStatus)	(char *Device, int 	      status, int MessageReference);
 };
 
 /* --------------------------- Statemachine layer -------------------------- */
 
 typedef enum {
 	GCT_MBUS2=1,
 	GCT_FBUS2,
 	GCT_FBUS2DLR3,
 	GCT_FBUS2DKU5,
 	GCT_FBUS2PL2303,
 	GCT_FBUS2BLUE,
 	GCT_FBUS2IRDA,
 	GCT_PHONETBLUE,
 	GCT_AT,
 	GCT_MROUTERBLUE,
 
 	GCT_IRDAOBEX,
 	GCT_IRDAAT,
 	GCT_IRDAPHONET,
 	GCT_BLUEFBUS2,
 	GCT_BLUEAT,
 	GCT_BLUEPHONET,
 	GCT_BLUEOBEX
 } GSM_ConnectionType;
 
 typedef struct {
 	/* Config file (or Registry or...) variables */
 	char			Model[50];	   /* Model from config file 		*/
 	char			DebugLevel[50];    /* Debug level			*/
 	char 			*Device;	   /* Device name from config file 	*/
 	char			*Connection;	   /* Connection type as string		*/
 	char			*SyncTime;	   /* Synchronize time on startup? 	*/
 	char			*LockDevice;	   /* Lock device ? (Unix)		*/
 	char			*DebugFile;        /* Name of debug file		*/
 	char 			*Localize;	   /* Name of localisation file		*/
 	char			*StartInfo;	   /* Display something during start ?  */
 	bool			UseGlobalDebugFile;/* Should we use global debug file?	*/
 	bool			DefaultModel;
 	bool			DefaultDebugLevel;
 	bool			DefaultDevice;
 	bool			DefaultConnection;
 	bool			DefaultSyncTime;
 	bool			DefaultLockDevice;
 	bool			DefaultDebugFile;
 	bool			DefaultLocalize;
 	bool			DefaultStartInfo;
 } GSM_Config;
 
 #define MAX_CONFIG_NUM		5
 
 struct _GSM_StateMachine {
 	GSM_ConnectionType 	ConnectionType;				/* Type of connection as int			*/
 	char			*LockFile;				/* Lock file name for Unix 			*/
 	Debug_Info		di;					/* Debug information				*/
 	bool			opened;					/* Is connection opened ?			*/
 	GSM_Config		Config[MAX_CONFIG_NUM + 1];
 	GSM_Config		*CurrentConfig;				/* Config file (or Registry or...) variables 	*/
 	int			ConfigNum;
 	INI_Section 		*msg;			/* Localisation strings structure    		*/
 	int			ReplyNum;				/* How many times make sth. 			*/
 	int			Speed;					/* For some protocols used speed		*/
 
 	GSM_Device		Device;
 	GSM_Protocol		Protocol;
 	GSM_Phone		Phone;
 	GSM_User		User;
 };
 
 /* ------------------------ Other general definitions ---------------------- */
 
 GSM_Error GSM_RegisterAllPhoneModules	(GSM_StateMachine *s);
 
 GSM_Error GSM_InitConnection		(GSM_StateMachine *s, int ReplyNum);
 GSM_Error GSM_TerminateConnection	(GSM_StateMachine *s);
 
 int 	  GSM_ReadDevice		(GSM_StateMachine *s, bool wait);
 
 GSM_Error GSM_WaitForOnce		(GSM_StateMachine *s, unsigned char *buffer,
 			  		 int length, unsigned char type, int time);
 
 GSM_Error GSM_WaitFor			(GSM_StateMachine *s, unsigned char *buffer,
 		       			 int length, unsigned char type, int time,
 					 GSM_Phone_RequestID request);
 
 GSM_Error GSM_DispatchMessage		(GSM_StateMachine *s);
 
 INI_Section 				*GSM_FindGammuRC(void);
 
 bool 	  GSM_ReadConfig		(INI_Section *cfg_info, GSM_Config *cfg, int num);
 
 void 	  GSM_DumpMessageLevel2		(GSM_StateMachine *s, unsigned char *message, int messagesize, int type);
 void 	  GSM_DumpMessageLevel3		(GSM_StateMachine *s, unsigned char *message, int messagesize, int type);
 
 /* ---------------------- Phone features ----------------------------------- */
 
 typedef enum {
 	/* n6110.c */
 	F_CAL33 = 1,	/* Calendar,3310 style - 10 reminders, Unicode, 3 coding types	*/
 	F_CAL52,	/* Calendar,5210 style - full Unicode, etc.			*/
 	F_CAL82,	/* Calendar,8250 style - "normal", but with Unicode		*/
 	F_RING_SM,	/* Ringtones returned in SM format - 33xx			*/
 	F_NORING,	/* No ringtones							*/
 	F_NOPBKUNICODE,	/* No phonebook in Unicode					*/
 	F_NOWAP,      	/* No WAP							*/
 	F_NOCALLER,	/* No caller groups						*/
 	F_NOPICTURE,	/* No Picture Images						*/
 	F_NOPICTUREUNI,	/* No Picture Images text in Unicode				*/
 	F_NOSTARTUP,	/* No startup logo						*/
 	F_NOCALENDAR,	/* No calendar							*/
 	F_NOSTARTANI,	/* Startup logo is not animated 				*/
 	F_POWER_BATT,	/* Network and battery level get from netmonitor		*/
 	F_PROFILES33,	/* Phone profiles in 3310 style					*/
 	F_PROFILES51,	/* Phone profiles in 5110 style					*/
 	F_MAGICBYTES,	/* Phone can make authentication with magic bytes		*/
 	F_NODTMF,	/* Phone can't send DTMF					*/
 	F_DISPSTATUS,	/* Phone return display status					*/
 	F_NOCALLINFO,
 
 	/* n3320.c */
 	F_DAYMONTH,	/* Day and month reversed in pbk, when compare to GSM models	*/
 
 	/* n6510.c */
 	F_PBK35,	/* Phonebook in 3510 style with ringtones ID			*/
 	F_PBKIMG,	/* Phonebook in 7250 style with picture ID			*/
 	F_PBKTONEGAL,	/* Phonebook with selecting ringtones from gallery              */
 	F_PBKSMSLIST,	/* Phonebook with SMS list					*/
 	F_PBKUSER,	/* Phonebook with user ID					*/
 	F_RADIO,	/* Phone with FM radio						*/
 	F_TODO63,	/* ToDo in 6310 style - 0x55 msg type				*/
 	F_TODO66,	/* ToDo in 6610 style - like calendar, with date and other	*/
 	F_NOMIDI,	/* No ringtones in MIDI						*/
 	F_BLUETOOTH,	/* Bluetooth support						*/
 	F_NOFILESYSTEM,	/* No images, ringtones, java saved in special filesystem	*/
 	F_NOMMS,	/* No MMS sets in phone						*/
 	F_NOGPRSPOINT,	/* GPRS point are not useable					*/
 	F_CAL35,	/* Calendar,3510 style - Reminder,Call,Birthday			*/
 	F_CAL65,	/* Calendar,6510 style - CBMM, method 3				*/
 	F_WAPMMSPROXY,	/* WAP & MMS settings contains first & second proxy		*/
 
 	/* n6510.c && n7110.c */
 	F_VOICETAGS,	/* Voice tags available						*/
 	F_CAL62,	/* Calendar,6210 style - Call,Birthday,Memo,Meeting		*/
 	F_NOTES,
 
 	/* AT modules */
 	F_SMSONLYSENT,	/* Phone supports only sent/unsent messages			*/
 	F_BROKENCPBS, 	/* CPBS on some memories can hang phone				*/
 	F_M20SMS,	/* Siemens M20 like SMS handling				*/
 	F_SLOWWRITE,	/* Use slower writing which some phone need			*/
 	F_SMSME900,	/* SMS in ME start from location 900 - case of Sagem		*/
 	F_ALCATEL	/* Phone supports Alcatel protocol				*/
 } Feature;
 
 /* For models table */
 struct _OnePhoneModel {
 	char		*model;
 	char		*number;
 	char		*irdamodel;
 	Feature		features[12];
 };
 
 bool 		IsPhoneFeatureAvailable	(OnePhoneModel *model, Feature feature);
 OnePhoneModel 	*GetModelData		(char *model, char *number, char *irdamodel);
 
 #ifdef __GNUC__
 __attribute__((format(printf, 2, 3)))
 #endif
 int smprintf(GSM_StateMachine *s, const char *format, ...);
 
 void GSM_OSErrorInfo(GSM_StateMachine *s, char *description);
 
 #ifdef GSM_ENABLE_BACKUP
 void GSM_GetPhoneFeaturesForBackup(GSM_StateMachine *s, GSM_Backup_Info *info);
 #endif
 
 #endif
 
 /* How should editor hadle tabs in this file? Add editor commands here.
  * vim: noexpandtab sw=8 ts=8 sts=8:
  */
+
diff --git a/kaddressbook/kabcore.cpp b/kaddressbook/kabcore.cpp
index 7bec90a..b014cba 100644
--- a/kaddressbook/kabcore.cpp
+++ b/kaddressbook/kabcore.cpp
@@ -1,293 +1,294 @@
 /*
     This file is part of KAddressbook.
     Copyright (c) 2003 Tobias Koenig <tokoe@kde.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 /*s
 Enhanced Version of the file for platform independent KDE tools.
 Copyright (c) 2004 Ulf Schenk
 
 $Id$
 */
 
 #include "kabcore.h"
 
 #include <stdaddressbook.h>
 #include <klocale.h>
 #include <kfiledialog.h>
 #include <qtimer.h>
 #include <qlabel.h>
+#include <qregexp.h>
 #include <qlineedit.h>
 #include <qcheckbox.h>
 #include <qpushbutton.h>
 #include <qprogressbar.h>
 #include <libkdepim/phoneaccess.h>
 
 #ifndef KAB_EMBEDDED
 #include <qclipboard.h>
 #include <qdir.h> 
 #include <qfile.h>
 #include <qapplicaton.h>
 #include <qprogressbar.h>
 #include <qlayout.h>
 #include <qregexp.h>
 #include <qvbox.h>
 #include <kabc/addresseelist.h>
 #include <kabc/errorhandler.h>
 #include <kabc/resource.h>
 #include <kabc/vcardconverter.h>
 #include <kapplication.h>
 #include <kactionclasses.h>
 #include <kcmultidialog.h>
 #include <kdebug.h>
 #include <kdeversion.h>
 #include <kkeydialog.h>
 #include <kmessagebox.h>
 #include <kprinter.h>
 #include <kprotocolinfo.h>
 #include <kresources/selectdialog.h>
 #include <kstandarddirs.h>
 #include <ktempfile.h>
 #include <kxmlguiclient.h>
 #include <kaboutdata.h>
 #include <libkdepim/categoryselectdialog.h>
 
 #include "addresseeutil.h"
 #include "addresseeeditordialog.h"
 #include "extensionmanager.h"
 #include "kstdaction.h"
 #include "kaddressbookservice.h"
 #include "ldapsearchdialog.h"
 #include "printing/printingwizard.h"
 #else // KAB_EMBEDDED
 
 #include <kapplication.h>
 #include "KDGanttMinimizeSplitter.h"
 #include "kaddressbookmain.h"
 #include "kactioncollection.h"
 #include "addresseedialog.h"
 //US
 #include <addresseeview.h>
 
 #include <qapp.h>
 #include <qmenubar.h>
 //#include <qtoolbar.h>
 #include <qmessagebox.h>
 #include <kdebug.h>
 #include <kiconloader.h> // needed for SmallIcon
 #include <kresources/kcmkresources.h>
 #include <ktoolbar.h>
 
 
 //#include <qlabel.h>
 
 
 #ifndef DESKTOP_VERSION
 #include <qpe/ir.h>
 #include <qpe/qpemenubar.h>
 #include <qtopia/qcopenvelope_qws.h>
 #else
 
 #include <qmenubar.h>
 #endif
 
 #endif // KAB_EMBEDDED
 #include "kcmconfigs/kcmkabconfig.h"
 #include "kcmconfigs/kcmkdepimconfig.h"
 #include "kpimglobalprefs.h"
 #include "externalapphandler.h"
 
 
 #include <kresources/selectdialog.h>
 #include <kmessagebox.h>
 
 #include <picture.h>
 #include <resource.h>
 
 //US#include <qsplitter.h>
 #include <qmap.h>
 #include <qdir.h>
 #include <qfile.h>
 #include <qvbox.h>
 #include <qlayout.h>
 #include <qclipboard.h>
 #include <qtextstream.h>
 
 #include <libkdepim/categoryselectdialog.h>
 #include <kabc/vcardconverter.h>
 
 
 #include "addresseeutil.h"
 #include "undocmds.h"
 #include "addresseeeditordialog.h"
 #include "viewmanager.h"
 #include "details/detailsviewcontainer.h"
 #include "kabprefs.h"
 #include "xxportmanager.h"
 #include "incsearchwidget.h"
 #include "jumpbuttonbar.h"
 #include "extensionmanager.h"
 #include "addresseeconfig.h"
 #include <kcmultidialog.h>
 
 #ifdef _WIN32_
 
 #include "kaimportoldialog.h"
 #else
 #include <unistd.h>
 #endif
 // sync includes
 #include <libkdepim/ksyncprofile.h>
 #include <libkdepim/ksyncprefsdialog.h>
 
 class KAex2phonePrefs : public QDialog
 {
   public:
     KAex2phonePrefs( QWidget *parent=0, const char *name=0 ) :
       QDialog( parent, name, true ) 
     {
         setCaption( i18n("Export to phone options") );
         QVBoxLayout* lay = new QVBoxLayout( this );
         lay->setSpacing( 3 );
         lay->setMargin( 3 );
         QLabel *lab;
         lay->addWidget(lab = new QLabel( i18n("Please read Help-Sync Howto\nto know what settings to use."), this ) );  
         lab->setAlignment (AlignHCenter  ); 
         QHBox* temphb;
         temphb = new QHBox( this );
         new QLabel( i18n("I/O device: "), temphb ); 
         mPhoneDevice = new QLineEdit( temphb);
         lay->addWidget( temphb );
         temphb = new QHBox( this );
         new QLabel( i18n("Connection: "), temphb ); 
         mPhoneConnection = new QLineEdit( temphb);
         lay->addWidget( temphb );
         temphb = new QHBox( this );
         new QLabel( i18n("Model(opt.): "), temphb ); 
         mPhoneModel = new QLineEdit( temphb);
         lay->addWidget( temphb );
         mWriteToSim= new QCheckBox( i18n("Write Contacts to SIM card\n(if not, write to phone memory)"), this );
         lay->addWidget( mWriteToSim );
         lay->addWidget(lab = new QLabel( i18n("NOTE: This will remove all old\ncontact data on phone!"), this ) );  
         lab->setAlignment (AlignHCenter  ); 
         QPushButton * ok = new QPushButton( i18n("Export to mobile phone!"), this );
         lay->addWidget( ok );
         QPushButton * cancel = new QPushButton( i18n("Cancel"), this );
         lay->addWidget( cancel );
         connect ( ok,SIGNAL(clicked() ),this , SLOT ( accept() )  );
         connect (cancel, SIGNAL(clicked() ), this, SLOT ( reject())  );
         resize( 220, 240 );
         
     }
    
 public:
     QLineEdit* mPhoneConnection, *mPhoneDevice, *mPhoneModel; 
     QCheckBox* mWriteToSim;
 };
 
 bool pasteWithNewUid = true;
 
 #ifdef KAB_EMBEDDED
 KABCore::KABCore( KAddressBookMain *client, bool readWrite, QWidget *parent, const char *name )
   : QWidget( parent, name ), KSyncInterface(), mGUIClient( client ), mViewManager( 0 ),
     mExtensionManager( 0 ),mConfigureDialog( 0 ),/*US  mLdapSearchDialog( 0 ),*/
     mReadWrite( readWrite ), mModified( false ), mMainWindow(client)
 #else //KAB_EMBEDDED
 KABCore::KABCore( KXMLGUIClient *client, bool readWrite, QWidget *parent, const char *name )
   : QWidget( parent, name ), KSyncInterface(), mGUIClient( client ), mViewManager( 0 ),
     mExtensionManager( 0 ), mConfigureDialog( 0 ), mLdapSearchDialog( 0 ),
     mReadWrite( readWrite ), mModified( false )
 #endif //KAB_EMBEDDED
 {
   //  syncManager = new KSyncManager((QWidget*)this, (KSyncInterface*)this, KSyncManager::KAPI, KABPrefs::instance(), syncMenu);
   //  syncManager->setBlockSave(false);
   mExtensionBarSplitter = 0;
   mIsPart = !parent->inherits( "KAddressBookMain" );
 
   mAddressBook = KABC::StdAddressBook::self();
   KABC::StdAddressBook::setAutomaticSave( false );
 
 #ifndef KAB_EMBEDDED
   mAddressBook->setErrorHandler( new KABC::GUIErrorHandler );
 #endif //KAB_EMBEDDED
 
   connect( mAddressBook, SIGNAL( addressBookChanged( AddressBook * ) ),
            SLOT( addressBookChanged() ) );
 
 #if 0
   // LP moved to addressbook init method
   mAddressBook->addCustomField( i18n( "Department" ), KABC::Field::Organization,
                                 "X-Department", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Profession" ), KABC::Field::Organization,
                                 "X-Profession", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Assistant's Name" ), KABC::Field::Organization,
                                 "X-AssistantsName", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Manager's Name" ), KABC::Field::Organization,
                                 "X-ManagersName", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Spouse's Name" ), KABC::Field::Personal,
                                 "X-SpousesName", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Office" ), KABC::Field::Personal,
                                 "X-Office", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "IM Address" ), KABC::Field::Personal,
                                 "X-IMAddress", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Anniversary" ), KABC::Field::Personal,
                                 "X-Anniversary", "KADDRESSBOOK" );
 
   //US added this field to become compatible with Opie/qtopia addressbook
   // values can be "female" or "male" or "". An empty field represents undefined.
   mAddressBook->addCustomField( i18n( "Gender" ), KABC::Field::Personal,
                                 "X-Gender", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Children" ), KABC::Field::Personal,
                                 "X-Children", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "FreeBusyUrl" ), KABC::Field::Personal,
                                 "X-FreeBusyUrl", "KADDRESSBOOK" );
 #endif
   initGUI();
 
   mIncSearchWidget->setFocus();
 
 
   connect( mViewManager, SIGNAL( selected( const QString& ) ),
            SLOT( setContactSelected( const QString& ) ) );
   connect( mViewManager, SIGNAL( executed( const QString& ) ),
            SLOT( executeContact( const QString& ) ) );
 
   connect( mViewManager, SIGNAL( deleteRequest( ) ),
            SLOT( deleteContacts( ) ) );
   connect( mViewManager, SIGNAL( modified() ),
            SLOT( setModified() ) );
 
   connect( mExtensionManager, SIGNAL( modified( const KABC::Addressee::List& ) ), this, SLOT( extensionModified( const KABC::Addressee::List& ) ) );
   connect( mExtensionManager, SIGNAL( changedActiveExtension( int ) ), this, SLOT( extensionChanged( int ) ) );
 
   connect( mXXPortManager, SIGNAL( modified() ),
            SLOT( setModified() ) );
 
   connect( mJumpButtonBar, SIGNAL( jumpToLetter( const QString& ) ),
            SLOT( incrementalSearch( const QString& ) ) );
   connect( mIncSearchWidget, SIGNAL( fieldChanged() ),
            mJumpButtonBar, SLOT( recreateButtons() ) );
 
   connect( mDetails, SIGNAL( sendEmail( const QString& ) ),
            SLOT( sendMail( const QString& ) ) );
 
 
   connect( ExternalAppHandler::instance(), SIGNAL (requestForNameEmailUidList(const QString&, const QString&)),this, SLOT(requestForNameEmailUidList(const QString&, const QString&)));
@@ -473,512 +474,517 @@ void KABCore::createAboutData()
   about->addAuthor( "Don Sanders", I18N_NOOP( "Original author " ) );
   about->addAuthor( "Cornelius Schumacher",
                     I18N_NOOP( "Co-maintainer, libkabc port, CSV import/export " ),
                     "schumacher@kde.org" );
   about->addAuthor( "Mike Pilone", I18N_NOOP( "GUI and framework redesign " ),
                     "mpilone@slac.com" );
   about->addAuthor( "Greg Stern", I18N_NOOP( "DCOP interface" ) );
   about->addAuthor( "Mark Westcott", I18N_NOOP( "Contact pinning" ) );
   about->addAuthor( "Michel Boyer de la Giroday", I18N_NOOP( "LDAP Lookup\n" ),
                     "michel@klaralvdalens-datakonsult.se" );
   about->addAuthor( "Steffen Hansen", I18N_NOOP( "LDAP Lookup " ),
                     "hansen@kde.org" );
 
   return about;
 #endif //KAB_EMBEDDED
 
   QString version;
 #include <../version>
     QMessageBox::about( this, "About KAddressbook/Pi",
                         "KAddressbook/Platform-independent\n"
                         "(KA/Pi) " +version + " - " +
 #ifdef DESKTOP_VERSION
                         "Desktop Edition\n"
 #else
                         "PDA-Edition\n"
                         "for: Zaurus 5500 / 7x0 / 8x0\n"
 #endif
 
                         "(c) 2004 Ulf Schenk\n"
                         "(c) 2004 Lutz Rogowski\n"
                         "(c) 1997-2003, The KDE PIM Team\n"
   "Tobias Koenig Current maintainer\ntokoe@kde.org\n"
   "Don Sanders Original author\n"
   "Cornelius Schumacher Co-maintainer\nschumacher@kde.org\n"
   "Mike Pilone GUI and framework redesign\nmpilone@slac.com\n"
   "Greg Stern DCOP interface\n"
   "Mark Westcot Contact pinning\n"
   "Michel Boyer de la Giroday LDAP Lookup\n" "michel@klaralvdalens-datakonsult.se\n"
   "Steffen Hansen LDAP Lookup\nhansen@kde.org\n"
 #ifdef _WIN32_
  "(c) 2004 Lutz Rogowski Import from OL\nrogowski@kde.org\n"
 #endif
  );
 }
 
 void KABCore::setContactSelected( const QString &uid )
 {
   KABC::Addressee addr = mAddressBook->findByUid( uid );
   if ( !mDetails->isHidden() )
     mDetails->setAddressee( addr );
 
   if ( !addr.isEmpty() ) {
     emit contactSelected( addr.formattedName() );
     KABC::Picture pic = addr.photo();
     if ( pic.isIntern() ) {
 //US      emit contactSelected( pic.data() );
 //US instead use:
       QPixmap px;
       if (pic.data().isNull() != true)
       {
         px.convertFromImage(pic.data());
       }
 
       emit contactSelected( px );
     }
   }
 
 
   mExtensionManager->setSelectionChanged();
 
   // update the actions
   bool selected = !uid.isEmpty();
 
   if ( mReadWrite ) {
     mActionCut->setEnabled( selected );
     mActionPaste->setEnabled( selected );
   }
 
   mActionCopy->setEnabled( selected );
   mActionDelete->setEnabled( selected );
   mActionEditAddressee->setEnabled( selected );
   mActionMail->setEnabled( selected );
   mActionMailVCard->setEnabled( selected );
   //if (mActionBeam)
   //mActionBeam->setEnabled( selected );
 
   if (mActionBeamVCard)
    mActionBeamVCard->setEnabled( selected );
 
   mActionExport2phone->setEnabled( selected );
   mActionWhoAmI->setEnabled( selected );
   mActionCategories->setEnabled( selected );
 }
 
 void KABCore::sendMail()
 {
   sendMail( mViewManager->selectedEmails().join( ", " ) );
 }
 
 void KABCore::sendMail( const QString& emaillist )
 {
   // the parameter has the form "name1 <abc@aol.com>,name2 <abc@aol.com>;... "
   if (emaillist.contains(",") > 0)
     ExternalAppHandler::instance()->mailToMultipleContacts( emaillist, QString::null );
   else
     ExternalAppHandler::instance()->mailToOneContact( emaillist );
 }
 
 
 
 void KABCore::mailVCard()
 {
   QStringList uids = mViewManager->selectedUids();
   if ( !uids.isEmpty() )
     mailVCard( uids );
 }
 
 void KABCore::mailVCard( const QStringList& uids )
 {
   QStringList urls;
 
 //  QString tmpdir = locateLocal("tmp", KGlobal::getAppName());
 
   QString dirName = "/tmp/" + KApplication::randomString( 8 );
 
 
 
   QDir().mkdir( dirName, true );
 
   for( QStringList::ConstIterator it = uids.begin(); it != uids.end(); ++it ) {
     KABC::Addressee a = mAddressBook->findByUid( *it );
 
     if ( a.isEmpty() )
       continue;
 
     QString name = a.givenName() + "_" + a.familyName() + ".vcf";
 
     QString fileName = dirName + "/" + name;
 
     QFile outFile(fileName);
 
     if ( outFile.open(IO_WriteOnly) ) {  // file opened successfully
       KABC::VCardConverter converter;
       QString vcard;
 
       converter.addresseeToVCard( a, vcard );
 
       QTextStream t( &outFile );  // use a text stream
       t.setEncoding( QTextStream::UnicodeUTF8 );
       t << vcard;
 
       outFile.close();
 
       urls.append( fileName );
     }
   }
 
   bool result = ExternalAppHandler::instance()->mailToMultipleContacts( QString::null, urls.join(", ") );
 
 
 /*US
   kapp->invokeMailer( QString::null, QString::null, QString::null,
                       QString::null,  // subject
                       QString::null,  // body
                       QString::null,
                       urls );  // attachments
 */
 
 }
 
 /**
   Beams the "WhoAmI contact.
 */
 void KABCore::beamMySelf()
 {
   KABC::Addressee a = KABC::StdAddressBook::self()->whoAmI();
   if (!a.isEmpty())
   {
     QStringList uids;
     uids << a.uid();
 
 	beamVCard(uids);
   } else {
       KMessageBox::information( this, i18n( "Your personal contact is\nnot set! Please select it\nand set it with menu:\nSettings - Set Who Am I\n" ) );
 
 
   }
 }
 
 void KABCore::export2phone()
 {
 
     KAex2phonePrefs ex2phone;
     ex2phone.mPhoneConnection->setText( KPimGlobalPrefs::instance()->mEx2PhoneConnection );
     ex2phone.mPhoneDevice->setText( KPimGlobalPrefs::instance()->mEx2PhoneDevice );
     ex2phone.mPhoneModel->setText( KPimGlobalPrefs::instance()->mEx2PhoneModel );
 
     if ( !ex2phone.exec() ) {
         return;
     }
     KPimGlobalPrefs::instance()->mEx2PhoneConnection  = ex2phone.mPhoneConnection->text();
     KPimGlobalPrefs::instance()->mEx2PhoneDevice = ex2phone.mPhoneDevice->text();
     KPimGlobalPrefs::instance()->mEx2PhoneModel = ex2phone.mPhoneModel->text();
 
 
     PhoneAccess::writeConfig( KPimGlobalPrefs::instance()->mEx2PhoneDevice,
                               KPimGlobalPrefs::instance()->mEx2PhoneConnection,
                               KPimGlobalPrefs::instance()->mEx2PhoneModel );
 
     QStringList uids = mViewManager->selectedUids();
     if ( uids.isEmpty() )
         return;
 
 #ifdef _WIN32_
     QString  fileName = locateLocal("tmp", "tempfile.vcf");
 #else
     QString  fileName = "/tmp/kdepimtemp.vcf";
 #endif
 
   KABC::VCardConverter converter;
   QString description;
   QString datastream;
   for( QStringList::ConstIterator it = uids.begin(); it != uids.end(); ++it ) {
       KABC::Addressee a = mAddressBook->findByUid( *it );
 
       if ( a.isEmpty() )
           continue;
 
       if (description.isEmpty())
           description = a.formattedName();
 
       QString vcard;
       converter.addresseeToVCard( a, vcard );
       int start = 0;
       int next;
       while ( (next = vcard.find("TYPE=", start) )>= 0 ) {
           int semi = vcard.find(";", next);
           int dopp = vcard.find(":", next);
           int sep;
           if ( semi < dopp && semi >= 0 )
               sep = semi ;
           else
               sep = dopp;
           datastream +=vcard.mid( start, next - start);
           datastream +=vcard.mid( next+5,sep -next -5 ).upper();
           start = sep;
       }
       datastream += vcard.mid( start,vcard.length() );
   }
   QFile outFile(fileName);
   if ( outFile.open(IO_WriteOnly) ) { 
       datastream.replace ( QRegExp("VERSION:3.0") , "VERSION:2.1" );
       QTextStream t( &outFile );  // use a text stream
       t.setEncoding( QTextStream::UnicodeUTF8 );
       t <<datastream;
       outFile.close();
+      if ( PhoneAccess::writeToPhone( fileName ) )
+          qDebug("Export okay ");
+      else
+          qDebug("Error export contacts ");
+          
   } else {
       qDebug("Error open temp file ");
       return;
   }
 
 
 #if 0
 
     setCaption( i18n("Writing to phone..."));
     if ( PhoneFormat::writeToPhone( cal ) )
         setCaption( i18n("Export to phone successful!"));
     else
         setCaption( i18n("Error exporting to phone!"));
 #endif
 
 
 }
 void KABCore::beamVCard()
 {
   QStringList uids = mViewManager->selectedUids();
   if ( !uids.isEmpty() )
     beamVCard( uids );
 }
 
 
 void KABCore::beamVCard(const QStringList& uids)
 {
 /*US
 	QString beamFilename;
 	Opie::OPimContact c;
 	if ( actionPersonal->isOn() ) {
 		beamFilename = addressbookPersonalVCardName();
 		if ( !QFile::exists( beamFilename ) )
 			return; // can't beam a non-existent file
 		Opie::OPimContactAccessBackend* vcard_backend = new Opie::OPimContactAccessBackend_VCard( QString::null,
 											beamFilename );
 		Opie::OPimContactAccess* access = new Opie::OPimContactAccess ( "addressbook", QString::null , vcard_backend, true );
 		Opie::OPimContactAccess::List allList = access->allRecords();
 		Opie::OPimContactAccess::List::Iterator it = allList.begin();  // Just take first
 		c = *it;
 
 		delete access;
 	} else {
 		unlink( beamfile ); // delete if exists
 		mkdir("/tmp/obex/", 0755);
 		c = m_abView -> currentEntry();
 		Opie::OPimContactAccessBackend* vcard_backend = new Opie::OPimContactAccessBackend_VCard( QString::null,
 											beamfile );
 		Opie::OPimContactAccess* access = new Opie::OPimContactAccess ( "addressbook", QString::null , vcard_backend, true );
 		access->add( c );
 		access->save();
 		delete access;
 
 		beamFilename = beamfile;
 	}
 
 	owarn << "Beaming: " << beamFilename << oendl;
 */
 
 #if 0
   QString tmpdir = locateLocal("tmp", KGlobal::getAppName());
 
   QString dirName = tmpdir + "/" + KApplication::randomString( 8 );
 
   QString name = "contact.vcf";
 
   QString fileName = dirName + "/" + name;
 #endif
   // LR: we should use the /tmp dir, because: /tmp = RAM, (HOME)/kdepim = flash memory
   //
   QString fileName = "/tmp/kapibeamfile.vcf";
 
 
   //QDir().mkdir( dirName, true );
 
  
   KABC::VCardConverter converter;
   QString description;
   QString datastream;
   for( QStringList::ConstIterator it = uids.begin(); it != uids.end(); ++it ) {
       KABC::Addressee a = mAddressBook->findByUid( *it );
 
       if ( a.isEmpty() )
           continue;
 
       if (description.isEmpty())
           description = a.formattedName();
 
       QString vcard;
       converter.addresseeToVCard( a, vcard );
       int start = 0;
       int next;
       while ( (next = vcard.find("TYPE=", start) )>= 0 ) {
           int semi = vcard.find(";", next);
           int dopp = vcard.find(":", next);
           int sep;
           if ( semi < dopp && semi >= 0 )
               sep = semi ;
           else
               sep = dopp;
           datastream +=vcard.mid( start, next - start);
           datastream +=vcard.mid( next+5,sep -next -5 ).upper();
           start = sep;
       }
       datastream += vcard.mid( start,vcard.length() );
   }
 #ifndef DESKTOP_VERSION
   QFile outFile(fileName);
   if ( outFile.open(IO_WriteOnly) ) { 
       datastream.replace ( QRegExp("VERSION:3.0") , "VERSION:2.1" );
       QTextStream t( &outFile );  // use a text stream
       t.setEncoding( QTextStream::UnicodeUTF8 );
       t <<datastream;
       outFile.close();
       Ir *ir = new Ir( this );
       connect( ir, SIGNAL( done(Ir*) ), this, SLOT( beamDone(Ir*) ) );
       ir->send( fileName, description, "text/x-vCard" );
   } else {
       qDebug("Error open temp  beam file ");
       return;
   }
 #endif
 
 }
 
 void KABCore::beamDone( Ir *ir )
 {
 #ifndef DESKTOP_VERSION
   delete ir;
 #endif
 }
 
 
 void KABCore::browse( const QString& url )
 {
 #ifndef KAB_EMBEDDED
   kapp->invokeBrowser( url );
 #else //KAB_EMBEDDED
   qDebug("KABCore::browse must be fixed");
 #endif //KAB_EMBEDDED
 }
 
 void KABCore::selectAllContacts()
 {
   mViewManager->setSelected( QString::null, true );
 }
 
 void KABCore::deleteContacts()
 {
   QStringList uidList = mViewManager->selectedUids();
   deleteContacts( uidList );
 }
 
 void KABCore::deleteContacts( const QStringList &uids )
 {
   if ( uids.count() > 0 ) {
     PwDeleteCommand *command = new PwDeleteCommand( mAddressBook, uids );
     UndoStack::instance()->push( command );
     RedoStack::instance()->clear();
 
     // now if we deleted anything, refresh
     setContactSelected( QString::null );
     setModified( true );
   }
 }
 
 void KABCore::copyContacts()
 {
   KABC::Addressee::List addrList = mViewManager->selectedAddressees();
 
   QString clipText = AddresseeUtil::addresseesToClipboard( addrList );
 
   kdDebug(5720) << "KABCore::copyContacts: " << clipText << endl;
 
   QClipboard *cb = QApplication::clipboard();
   cb->setText( clipText );
 }
 
 void KABCore::cutContacts()
 {
   QStringList uidList = mViewManager->selectedUids();
 
 //US  if ( uidList.size() > 0 ) {
   if ( uidList.count() > 0 ) {
     PwCutCommand *command = new PwCutCommand( mAddressBook, uidList );
     UndoStack::instance()->push( command );
     RedoStack::instance()->clear();
 
     setModified( true );
   }
 }
 
 void KABCore::pasteContacts()
 {
   QClipboard *cb = QApplication::clipboard();
 
   KABC::Addressee::List list = AddresseeUtil::clipboardToAddressees( cb->text() );
 
   pasteContacts( list );
 }
 
 void KABCore::pasteContacts( KABC::Addressee::List &list  )
 {
   KABC::Resource *resource = requestResource( this );
   KABC::Addressee::List::Iterator it;
   for ( it = list.begin(); it != list.end(); ++it )
     (*it).setResource( resource );
 
   PwPasteCommand *command = new PwPasteCommand( this, list );
   UndoStack::instance()->push( command );
   RedoStack::instance()->clear();
 
   setModified( true );
 }
 
 void KABCore::setWhoAmI()
 {
   KABC::Addressee::List addrList = mViewManager->selectedAddressees();
 
   if ( addrList.count() > 1 ) {
     KMessageBox::sorry( this, i18n( "Please select only one contact." ) );
     return;
   }
 
   QString text( i18n( "<qt>Do you really want to use <b>%1</b> as your new personal contact?</qt>" ) );
   if ( KMessageBox::questionYesNo( this, text.arg( addrList[ 0 ].assembledName() ) ) == KMessageBox::Yes )
     static_cast<KABC::StdAddressBook*>( KABC::StdAddressBook::self() )->setWhoAmI( addrList[ 0 ] );
 }
 
 void KABCore::setCategories()
 {
   KPIM::CategorySelectDialog dlg( KABPrefs::instance(), this, "", true );
   if ( !dlg.exec() )
     return;
 
   bool merge = false;
   QString msg = i18n( "Merge with existing categories?" );
   if ( KMessageBox::questionYesNo( this, msg ) == KMessageBox::Yes )
     merge = true;
 
   QStringList categories = dlg.selectedCategories();
 
   QStringList uids = mViewManager->selectedUids();
   QStringList::Iterator it;
   for ( it = uids.begin(); it != uids.end(); ++it ) {
     KABC::Addressee addr = mAddressBook->findByUid( *it );
     if ( !addr.isEmpty() ) {
       if ( !merge )
         addr.setCategories( categories );
       else {
         QStringList addrCategories = addr.categories();
         QStringList::Iterator catIt;
         for ( catIt = categories.begin(); catIt != categories.end(); ++catIt ) {
           if ( !addrCategories.contains( *catIt ) )
             addrCategories.append( *catIt );
         }
diff --git a/libkdepim/phoneaccess.cpp b/libkdepim/phoneaccess.cpp
index c0bd6cc..357cd39 100644
--- a/libkdepim/phoneaccess.cpp
+++ b/libkdepim/phoneaccess.cpp
@@ -1,153 +1,147 @@
 /*
     This file is part of libkdepim.
 
     Copyright (c) 2004 Lutz Rogowski <rogowski@kde.org>
 
     This library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License as published by the Free Software Foundation; either
     version 2 of the License, or (at your option) any later version.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 
 
 #include <qstring.h>
 #include <qapplication.h>
 #include <qptrlist.h>
 #include <qregexp.h>
 #include <qfile.h>
 #include <qtextstream.h>
 #include <qtextcodec.h>
 #include <qdir.h>
 #include <kmessagebox.h>
 #include <stdlib.h>
 #include "phoneaccess.h"
 
 void PhoneAccess::writeConfig( QString device, QString connection, QString model )
 {
 #ifdef _WIN32_
     QString fileName = qApp->applicationDirPath () +"\\gammurc";
 #else
     QString fileName = QDir::homeDirPath() +"/.gammurc";
 #endif
     //qDebug("save %d ", load );
-    QString content;
+    QString content = "[gammu]\n";;
     bool write = false;
     bool addPort = true, addConnection = true, addModel = true;
     QFile file( fileName );
     if ( QFile::exists(  fileName) ) {
         if (!file.open( IO_ReadOnly ) ) {
             qDebug("Error: cannot open %s ", fileName.latin1() );
             return;
         } 
         QString line;
         while ( file.readLine( line, 1024 ) > 0 ) {
             //qDebug("*%s* ", line.latin1() );
             if ( line.left(7 ) == "[gammu]" ) {
-                ;
+               ; 
             } else 
             if ( line.left(4 ) == "port" ) {
                 if ( line == "port = " + device+"\n" ) {
                     content += line ;
                     addPort = false;  
                     //qDebug("port found" );
                 }
                
             } else  if ( line.left(5 ) == "model" )  {
                 if ( line == "model = " + model +"\n") {
                     content += line ;
                     addModel = false;  
                     //qDebug("model found" );
                 }
               
             } else  if ( line.left( 10 ) == "connection" )  {
                 if ( line == "connection = " + connection +"\n") {
                     addConnection = false; 
                     content += line ;
                     //qDebug("con found" );
                 }
               
             } else {
                 content += line ;
             }
         }
         file.close();
     } else {
         if ( ! connection.isEmpty() ) {
             addConnection = true; 
         }
         if ( ! device.isEmpty() ) {
             addPort = true; 
 
         }
         if ( ! model.isEmpty() ) {
             addModel = true; 
         }
     }
-
+   
     if ( addConnection ) {
-        if ( ! write ) 
-            content += "[gammu]\n";
         write = true;
         content += "connection = ";
         content += connection;
         content += "\n";
     }
     if ( addPort ) {
-        if ( ! write ) 
-            content += "[gammu]\n";
         write = true;
         content += "port = ";
         content += device;
         content += "\n";
 
     }
     if ( addModel ) {
-        if ( ! write ) 
-            content += "[gammu]\n";
         write = true;
         content += "model = ";
         content += model;
         content += "\n";
     }
     if ( write ) {
         if (!file.open( IO_WriteOnly ) ) {
             qDebug("Error: cannot write file  %s ", fileName.latin1() );
             return;
         } 
         qDebug("Writing file  %s ", fileName.latin1() );
         QTextStream ts( &file );
         ts << content ;
         file.close();
     }
 
 }
 
 
 bool PhoneAccess::writeToPhone( QString fileName)
 {
 
 #ifdef DESKTOP_VERSION
     QString command ="./kammu --restore " + fileName ;
 #else
     QString command ="kammu --restore " + fileName ;
 #endif
     int ret;
     while ( (ret = system (  command.latin1())) != 0 ) {
         qDebug("Error S::command returned %d. asking users", ret); 
         int retval = KMessageBox::warningContinueCancel(0,
                                                         i18n("Error accessing device!\nPlease turn on connection\nand retry!"),i18n("KO/Pi phone access"),i18n("Retry"),i18n("Cancel"));
         if ( retval != KMessageBox::Continue )
             return false;
     }
     return true;
 }