fixes

6 files changed, 29 insertions, 4 deletions

diff --git a/korganizer/calendarview.cpp b/korganizer/calendarview.cpp
index 4b82aa8..8f5de4d 100644
--- a/korganizer/calendarview.cpp
+++ b/korganizer/calendarview.cpp
@@ -519,259 +519,261 @@ void CalendarView::init()
 
     connect( mDateNavigator, SIGNAL( goPrevious() ),
              mNavigator, SLOT( selectPrevious() ) );
     connect( mDateNavigator, SIGNAL( goNext() ),
              mNavigator, SLOT( selectNext() ) );
     connect( mDateNavigator, SIGNAL( monthSelected ( int ) ),
              mNavigator, SLOT( slotMonthSelect( int ) ) );
 
     connect( mDateNavigator, SIGNAL( datesSelected( const KCal::DateList & ) ),
              mNavigator, SLOT( selectDates( const KCal::DateList & ) ) );
 #if 0
     connect( mDateNavigator, SIGNAL( incidenceDropped( Incidence * ) ),
              SLOT( incidenceAdded(  Incidence *) ) );
 #endif
     // connect(mDateNavigator,SIGNAL(dayPassed(QDate)),SLOT(updateView()));
 
     connect( this, SIGNAL( configChanged() ),
              mDateNavigator, SLOT( updateConfig() ) );
 
     connect( mTodoList, SIGNAL( newTodoSignal() ),
              SLOT( newTodo() ) );
     connect( mTodoList, SIGNAL( newSubTodoSignal( Todo *) ),
              SLOT( newSubTodo( Todo * ) ) );
     connect( mTodoList, SIGNAL( editTodoSignal( Todo * ) ),
              SLOT( editTodo( Todo * ) ) );
     connect( mTodoList, SIGNAL( showTodoSignal( Todo * ) ),
              SLOT( showTodo( Todo *) ) );
     connect( mTodoList, SIGNAL( deleteTodoSignal( Todo *) ),
              SLOT( deleteTodo( Todo *) ) );
     connect( this, SIGNAL( configChanged()), mTodoList, SLOT( updateConfig() ) );
     connect( mTodoList, SIGNAL( purgeCompletedSignal() ),
              SLOT( purgeCompleted() ) );
     connect( mTodoList, SIGNAL( todoModifiedSignal( Todo *, int ) ),
              SIGNAL( todoModified( Todo *, int ) ) );
 
     connect( mTodoList, SIGNAL( cloneTodoSignal( Incidence *  ) ),
              this, SLOT ( cloneIncidence( Incidence * ) ) );
     connect( mTodoList, SIGNAL( cancelTodoSignal( Incidence *  ) ),
              this, SLOT (cancelIncidence( Incidence * ) ) );
 
     connect( mTodoList, SIGNAL( moveTodoSignal( Incidence *  ) ),
              this, SLOT ( moveIncidence( Incidence * ) ) );
     connect( mTodoList, SIGNAL( beamTodoSignal( Incidence *  ) ),
             this, SLOT ( beamIncidence( Incidence * ) ) );
   
     connect( mTodoList, SIGNAL( unparentTodoSignal( Todo * ) ),
              this, SLOT ( todo_unsub( Todo * ) ) );
   
     connect( mTodoList, SIGNAL( reparentTodoSignal( Todo *,Todo * ) ),
                  this, SLOT ( todo_resub( Todo *,Todo * ) ) );
     connect( this, SIGNAL( todoModified( Todo *, int )), mTodoList,
              SLOT( updateTodo( Todo *, int ) ) );
     connect( this, SIGNAL( todoModified( Todo *, int )), this,
              SLOT( changeTodoDisplay( Todo *, int ) ) );
 
 
     connect( mFilterView, SIGNAL( filterChanged() ), SLOT( updateFilter() ) );
     connect( mFilterView, SIGNAL( editFilters() ), SLOT( editFilters() ) );
     connect( mCalendar, SIGNAL( addAlarm(const QDateTime &, const QString &  ) ), SLOT( addAlarm(const QDateTime &, const QString &  ) ) );
     connect( mCalendar, SIGNAL( removeAlarm(const QDateTime &, const QString &  ) ), SLOT( removeAlarm(const QDateTime &, const QString & ) ) );
   
 
 
 
 
     connect(QApplication::clipboard(),SIGNAL(dataChanged()),
             SLOT(checkClipboard()));
     connect( mTodoList,SIGNAL( incidenceSelected( Incidence * ) ),
              SLOT( processTodoListSelection( Incidence * ) ) );
     connect(mTodoList,SIGNAL(isModified(bool)),SLOT(setModified(bool)));
 
     // kdDebug() << "CalendarView::CalendarView() done" << endl; 
 
     mDateFrame = new QVBox(0,0,WType_Popup);
     //mDateFrame->setFrameStyle(QFrame::PopupPanel | QFrame::Raised);
     mDateFrame->setFrameStyle( QFrame::WinPanel |QFrame::Raised );
     mDateFrame->setLineWidth(3);
     mDateFrame->hide(); 
     mDateFrame->setCaption( i18n( "Pick a date to display"));
     mDatePicker = new KDatePicker ( mDateFrame , QDate::currentDate() );
  
     connect(mDatePicker,SIGNAL(dateSelected(QDate)),SLOT(slotSelectPickerDate(QDate)));
  
     mEventEditor = mDialogManager->getEventEditor();  
     mTodoEditor = mDialogManager->getTodoEditor();  
    
     mFlagEditDescription = false; 
 
     mSuspendTimer = new QTimer( this );
     mAlarmTimer = new QTimer( this );
     mRecheckAlarmTimer = new QTimer( this );
     connect( mRecheckAlarmTimer, SIGNAL(  timeout ()  ), SLOT( recheckTimerAlarm() ) );
     connect( mSuspendTimer, SIGNAL(  timeout ()  ), SLOT( suspendAlarm() ) );
     connect( mAlarmTimer, SIGNAL(  timeout ()  ), SLOT( timerAlarm() ) );
     mAlarmDialog = new AlarmDialog( this );
     connect( mAlarmDialog, SIGNAL( addAlarm(const QDateTime &, const QString &  ) ), SLOT( addSuspendAlarm(const QDateTime &, const QString &  ) ) );
     mAlarmDialog->setServerNotification( false );
     mAlarmDialog->setSuspendTime( KOPrefs::instance()->mAlarmSuspendTime );
 
 
 #ifndef DESKTOP_VERSION
 //US listen for arriving address resultsets
   connect(ExternalAppHandler::instance(), SIGNAL(receivedBirthdayListEvent(const QString&, const QStringList&, const QStringList&, const QStringList&, const QStringList&, const QStringList&, const QStringList&)),
           this, SLOT(insertBirthdays(const QString&, const QStringList&, const QStringList&, const QStringList&, const QStringList&, const QStringList&, const QStringList&)));
 #endif
   mDateNavigator->setCalendar( mCalendar );
 }
 
 
 CalendarView::~CalendarView()
 {
     // kdDebug() << "~CalendarView()" << endl;
     //qDebug("CalendarView::~CalendarView() ");
     delete mDialogManager;
     delete mViewManager;
     delete mStorage;
     delete mDateFrame ;
     delete beamDialog;
     delete mEventViewerDialog;
     //kdDebug() << "~CalendarView() done" << endl;
 }
 void CalendarView::checkAlarms()
 {
     KConfig *config = KOGlobals::config();
     config->setGroup( "AppRun" );
     QDateTime dt ( QDate (2005,1,1), QTime( 0,0,0 ) );
     int secto = dt.secsTo( QDateTime::currentDateTime() );
     int secs = config->readNumEntry( "LatestProgramStop" , secto) - 30;
+    qDebug("KO: Reading program stop %d ", secs);
     //secs -= ( 3600 * 24*3 ); // debug only 
     QDateTime latest = dt.addSecs ( secs );
     qDebug("KO: Last termination on %s ", latest.toString().latin1());
+    qDebug("KO: Current Time %s ",QDateTime::currentDateTime().toString().latin1() );
     QPtrList<Incidence> el = mCalendar->rawIncidences(); 
     QPtrList<Incidence> al;
     Incidence* inL = el.first(); 
     QDateTime cur = QDateTime::currentDateTime().addSecs(-59);
     qDebug("KO: Checking alarm until %s ", cur.toString().latin1());
     while ( inL ) {  
         bool ok = false;
         int offset = 0;
         QDateTime next = inL->getNextAlarmDateTime(& ok, &offset, latest ) ;
         if ( ok ) {
             //qDebug("OK %s",next.toString().latin1());
             if ( next < cur ) {
                 al.append( inL );
                 //qDebug("found missed alarm: %s ", inL->summary().latin1() );
             }
         }
         inL = el.next();
     }
     if ( al.count() ) {
         QDialog* dia = new QDialog( this, "huhu", false, WDestructiveClose | WStyle_StaysOnTop  );
         dia->setCaption( i18n("KO/Pi: Missing alarms!") );
         QVBoxLayout* lay = new QVBoxLayout( dia );
         lay->setSpacing( 0 );
         lay->setMargin( 0 );
         MissedAlarmTextBrowser* matb = new MissedAlarmTextBrowser ( dia, al, latest );
         connect( matb, SIGNAL( showIncidence( QString ) ),SLOT( showIncidence( QString ) ));
         lay->addWidget( matb ); 
         if ( QApplication::desktop()->width() == 480 || QApplication::desktop()->width() == 640 ) {
             int wid = 210;
             int x = QApplication::desktop()->width() - wid - 7;
             int y = QApplication::desktop()->height() - wid - 70;
             dia->setGeometry ( x,y,wid,wid);
         } else {
             int si = 220;
             if ( QApplication::desktop()->width() > 470 )
                 si = 400;
             dia->resize(si,si/2);
         }
         dia->setBackgroundColor( QColor( 255, 255, 255 ) );
         dia->show();
 
     }
 }
 void CalendarView::showDay( QDate d )
 {
     dateNavigator()->blockSignals( true );
     dateNavigator()->selectDate( d );
     dateNavigator()->blockSignals( false );
     mViewManager->showDayView();
     //dateNavigator()->selectDate( d );
 }
 void CalendarView::timerAlarm()
 {
     //qDebug("CalendarView::timerAlarm() ");
     computeAlarm(mAlarmNotification );
 }
 
 void CalendarView::suspendAlarm()
 {
     //qDebug(" CalendarView::suspendAlarm() ");
     computeAlarm(mSuspendAlarmNotification );
 
 }
 
 void  CalendarView::startAlarm( QString mess , QString filename)
 {
 
     topLevelWidget()->showNormal();
     topLevelWidget()->setActiveWindow();
     topLevelWidget()->raise(); 
 
     mAlarmDialog->eventNotification( mess, KOPrefs::instance()->mAlarmPlayBeeps, filename, true,KOPrefs::instance()->mAlarmBeepInterval ,KOPrefs::instance()->mAlarmSuspendCount );
     QTimer::singleShot( 3000, this, SLOT( checkNextTimerAlarm() ) );
 
 }
     
 void CalendarView::checkNextTimerAlarm()
 {
     mCalendar->checkAlarmForIncidence( 0, true );
 }
 
 void  CalendarView::computeAlarm( QString msg )
 {
 
  QString mess = msg; 
     QString  mAlarmMessage = mess.mid( 9 ); 
     QString filename =  MainWindow::resourcePath();
     filename += "koalarm.wav";
     QString tempfilename;
     if ( mess.left( 13 )  == "suspend_alarm") {  
         bool error = false;
         int len = mess.mid( 13 ).find("+++");
         if ( len < 2 )
             error = true;
         else {
             tempfilename = mess.mid( 13, len );
             if ( !QFile::exists( tempfilename  ) )
                 error = true;
         }
         if ( ! error ) {
             filename = tempfilename;
         }
         mAlarmMessage = mess.mid( 13+len+3 );
         //qDebug("suspend file %s ",tempfilename.latin1() );
         startAlarm( mAlarmMessage, filename);
         return;
     }
     if ( mess.left( 11 )  == "timer_alarm") {
         //mTimerTime = 0;
         startAlarm( mess.mid( 11 ), filename );
         return;
     } 
     if ( mess.left( 10 )  == "proc_alarm") {
         bool error = false;
         int len = mess.mid( 10 ).find("+++");
         if ( len < 2 )
             error = true;
         else {
             tempfilename = mess.mid( 10, len );
             if ( !QFile::exists( tempfilename  ) )
                 error = true;
         }
         if ( error ) {
             mAlarmMessage = "Procedure Alarm\nError - File not found\n";
             mAlarmMessage += mess.mid( 10+len+3+9 );
         } else {
             //QCopEnvelope e("QPE/Application/kopi", "-writeFileSilent");
             //qDebug("-----system command %s ",tempfilename.latin1() );
@@ -2031,258 +2033,263 @@ void CalendarView::readSettings()
     globalFlagBlockAgenda = 1;
     mViewManager->showAgendaView();
     //mViewManager->readSettings( config );
     mTodoList->restoreLayout(config,QString("Todo Layout"));
     readFilterSettings(config);
    
 #ifdef DESKTOP_VERSION
     config->setGroup("WidgetLayout");
     QStringList list;
     list = config->readListEntry("MainLayout");
     int x,y,w,h;
     if ( ! list.isEmpty() ) {
         x = list[0].toInt();
         y = list[1].toInt();
         w = list[2].toInt();
         h = list[3].toInt(); 
         KApplication::testCoords( &x,&y,&w,&h );
         topLevelWidget()->setGeometry(x,y,w,h);
 
     } else {
         topLevelWidget()->setGeometry( 40 ,40 , 640, 440);
     }
     list = config->readListEntry("EditEventLayout");
     if ( ! list.isEmpty() ) {
         x = list[0].toInt();
         y = list[1].toInt();
         w = list[2].toInt();
         h = list[3].toInt();
         KApplication::testCoords( &x,&y,&w,&h );
         mEventEditor->setGeometry(x,y,w,h);
 
     }
     list = config->readListEntry("EditTodoLayout");
     if ( ! list.isEmpty() ) {
         x = list[0].toInt();
         y = list[1].toInt();
         w = list[2].toInt();
         h = list[3].toInt();
         KApplication::testCoords( &x,&y,&w,&h );
         mTodoEditor->setGeometry(x,y,w,h);
 
     }
     list = config->readListEntry("ViewerLayout");
     if ( ! list.isEmpty() ) {
         x = list[0].toInt();
         y = list[1].toInt();
         w = list[2].toInt();
         h = list[3].toInt();
         KApplication::testCoords( &x,&y,&w,&h );
         getEventViewerDialog()->setGeometry(x,y,w,h);
     }
 #endif
     config->setGroup( "Views" );
     int dateCount = config->readNumEntry( "ShownDatesCount", 7 );
 
     QValueList<int> sizes = config->readIntListEntry("Left Splitter Frame");
    
     int resetval = 0;
     int maxVal = 0;
     if (sizes.count() != 3) { 
         if ( KOPrefs::instance()->mVerticalScreen ) {
             resetval = mDateNavigator->sizeHint().width()+2;
         } else {
             resetval = mDateNavigator->sizeHint().height()+2;
         }
     }
     if ( resetval ) {
         sizes.clear();
         if ( KOPrefs::instance()->mVerticalScreen ) {
             maxVal = QApplication::desktop()->width() -10;
         } else {
             maxVal = QApplication::desktop()->height()-10;
         }
         sizes << resetval;
         if ( maxVal < resetval + resetval)
             resetval = maxVal - resetval;
         sizes << resetval;
         sizes << 100;
     }
     mLeftFrame->setSizes(sizes);
     sizes = config->readIntListEntry("Main Splitter Frame");
     resetval = 0;
     maxVal = 0;
     if (sizes.count() != 2) { 
         if ( !KOPrefs::instance()->mVerticalScreen ) {
             resetval = mDateNavigator->sizeHint().width()+2;
         } else {
             resetval = mDateNavigator->sizeHint().height()+2;
         }
     }
     if ( resetval ) {
         sizes.clear();
         if ( !KOPrefs::instance()->mVerticalScreen ) {
             maxVal = QApplication::desktop()->width() -10;
         } else {
             maxVal = QApplication::desktop()->height()-10;
         }
         sizes << resetval;
         if ( maxVal < resetval + resetval)
             resetval = maxVal - resetval;
         sizes << resetval;
     }
     mMainFrame->setSizes(sizes);
     if ( dateCount == 5 ) mNavigator->selectWorkWeek();
     else if ( dateCount == 7 ) mNavigator->selectWeek();
     else mNavigator->selectDates( dateCount );
     // mViewManager->readSettings( config );
     updateConfig(); 
     globalFlagBlockAgenda = 2;
     mViewManager->readSettings( config );
     QTimer::singleShot( 1, mDateNavigator, SLOT ( setResizeEnabled() ) );
 }
 
 
 void CalendarView::writeSettings()
 {
     //  kdDebug() << "CalendarView::writeSettings" << endl;
 
     KConfig *config = KOGlobals::config();
 
     mViewManager->writeSettings( config );
     mTodoList->saveLayout(config,QString("Todo Layout"));
     mDialogManager->writeSettings( config );
     //KOPrefs::instance()->usrWriteConfig();
     KOPrefs::instance()->writeConfig();
 
     writeFilterSettings(config);
     config->setGroup( "AppRun" );
-    QDateTime dt ( QDate (2005,1,1), QTime( 0,0,0 ) );
-    config->writeEntry( "LatestProgramStop", dt.secsTo( QDateTime::currentDateTime() ) );
+    QDateTime dt ( QDate (2005,3,1), QTime( 0,0,0 ) );
+    int secs = dt.secsTo( QDateTime::currentDateTime() );
+    config->writeEntry( "LatestProgramStop", secs );
+    qDebug("KO: Writing stop time: %d ", secs);
+    qDebug("KO: Current Time %s ",QDateTime::currentDateTime().toString().latin1() );
+    QDateTime latest = dt.addSecs ( secs );
+    qDebug("KO: Test termination on %s ", latest.toString().latin1());
     config->setGroup( "Views" );
     config->writeEntry( "ShownDatesCount", mNavigator->selectedDates().count() );
 
     QValueList<int> listINT = mLeftFrame->sizes();
     config->writeEntry("Left Splitter Frame",listINT);
     QValueList<int> listINT2 = mMainFrame->sizes();
     config->writeEntry("Main Splitter Frame",listINT2);
 #ifdef DESKTOP_VERSION
     config->setGroup("WidgetLayout");
     QStringList list ;//= config->readListEntry("MainLayout");
     int x,y,w,h;
     QWidget* wid;
     wid = topLevelWidget();
     x = wid->geometry().x();
     y = wid->geometry().y();
     w = wid->width();
     h = wid->height();
     list.clear();
     list << QString::number( x );
     list << QString::number( y );
     list << QString::number( w );
     list << QString::number( h );
     config->writeEntry("MainLayout",list );
     
     wid = mEventEditor;
     x = wid->geometry().x();
     y = wid->geometry().y();
     w = wid->width();
     h = wid->height();
     list.clear();
     list << QString::number( x );
     list << QString::number( y );
     list << QString::number( w );
     list << QString::number( h );
     config->writeEntry("EditEventLayout",list );
  
     wid = mTodoEditor;
     x = wid->geometry().x();
     y = wid->geometry().y();
     w = wid->width();
     h = wid->height();
     list.clear();
     list << QString::number( x );
     list << QString::number( y );
     list << QString::number( w );
     list << QString::number( h );
     config->writeEntry("EditTodoLayout",list ); 
     wid = getEventViewerDialog();
     x = wid->geometry().x();
     y = wid->geometry().y();
     w = wid->width();
     h = wid->height();
     list.clear();
     list << QString::number( x );
     list << QString::number( y );
     list << QString::number( w );
     list << QString::number( h );
     config->writeEntry("ViewerLayout",list ); 
     wid = mDialogManager->getSearchDialog();
     if ( wid ) {
         x = wid->geometry().x();
         y = wid->geometry().y();
         w = wid->width();
         h = wid->height();
         list.clear();
         list << QString::number( x );
         list << QString::number( y );
         list << QString::number( w );
         list << QString::number( h );
         config->writeEntry("SearchLayout",list );
     }
 #endif
 
 
     config->sync();
 }
 
 void CalendarView::readFilterSettings(KConfig *config)
 {
     //  kdDebug() << "CalendarView::readFilterSettings()" << endl;
 
     mFilters.clear();
 
     config->setGroup("General");
     QStringList filterList = config->readListEntry("CalendarFilters");
 
     QStringList::ConstIterator it = filterList.begin();
     QStringList::ConstIterator end = filterList.end();
     while(it != end) {
         //    kdDebug() << "  filter: " << (*it) << endl;
 
         CalFilter *filter;
         filter = new CalFilter(*it);
         config->setGroup("Filter_" + (*it).utf8());
         //qDebug("readFilterSettings %d ",config->readNumEntry("Criteria",0) );
         filter->setCriteria(config->readNumEntry("Criteria",0));
         filter->setCategoryList(config->readListEntry("CategoryList"));
         mFilters.append(filter);
 
         ++it;
     }
 
     if (mFilters.count() == 0) {
         CalFilter *filter = new CalFilter(i18n("Default"));
         mFilters.append(filter);
     }
     mFilterView->updateFilters();
     config->setGroup("FilterView");
 
     mFilterView->blockSignals(true);
     mFilterView->setFiltersEnabled(config->readBoolEntry("FilterEnabled"));
     mFilterView->setSelectedFilter(config->readEntry("Current Filter"));
     mFilterView->blockSignals(false);
     // We do it manually to avoid it being done twice by the above calls
     updateFilter();
 }
 
 void CalendarView::writeFilterSettings(KConfig *config)
 {
     //  kdDebug() << "CalendarView::writeFilterSettings()" << endl;
 
     QStringList filterList;
 
     CalFilter *filter = mFilters.first();
     while(filter) {
         //    kdDebug() << " fn: " << filter->name() << endl;
         filterList << filter->name();
         config->setGroup("Filter_" + filter->name().utf8());
diff --git a/libkdepim/kcmconfigs/kdepimconfigwidget.cpp b/libkdepim/kcmconfigs/kdepimconfigwidget.cpp
index d3797ae..a0f9d2e 100644
--- a/libkdepim/kcmconfigs/kdepimconfigwidget.cpp
+++ b/libkdepim/kcmconfigs/kdepimconfigwidget.cpp
@@ -10,302 +10,304 @@
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 /*
 Enhanced Version of the file for platform independent KDE tools.
 Copyright (c) 2004 Ulf Schenk
 
 $Id$
 */
 
 #include <qlayout.h>
 #include <qtabwidget.h>
 #include <qcombobox.h>
 #include <qgroupbox.h>
 #include <qlabel.h>
 #include <qlineedit.h>
 #include <qbuttongroup.h>
 #include <qcheckbox.h>
 #include <qfile.h>
 #include <qvbox.h>
 #include <qdir.h>
 #include <qregexp.h>
 #include <qspinbox.h>
 
 #include <kdialog.h>
 #include <kprefsdialog.h>
 #include <klocale.h>
 #include <kglobalsettings.h>
 #include <kdateedit.h>
 #include <kglobal.h>
 #include <stdlib.h>
 
 /*US
 #include <qcheckbox.h>
 #include <qframe.h>
 #include <qpushbutton.h>
 #include <qcombobox.h>
 #include <qlineedit.h>
 #include <qlabel.h>
 #include <qfile.h>
 
 #include <kconfig.h>
 #include <kdebug.h>
 #include <kdialog.h>
 #include <klistview.h>
 #include <klocale.h>
 #include <kglobal.h>
 #include <kmessagebox.h>
 #include <kstandarddirs.h>
 
 #ifndef KAB_EMBEDDED
 #include <ktrader.h>
 #else // KAB_EMBEDDED
 #include <mergewidget.h>
 #include <distributionlistwidget.h>
 #endif // KAB_EMBEDDED
 
 #include "addresseewidget.h"
 #include "extensionconfigdialog.h"
 #include "extensionwidget.h"
 */
 
 #include "qapplication.h"
 
 #include "kpimglobalprefs.h"
 
 #include "kdepimconfigwidget.h"
 #include <kprefs.h>
 #include <kmessagebox.h>
 
 
 KDEPIMConfigWidget::KDEPIMConfigWidget(KPimGlobalPrefs *prefs, QWidget *parent, const char *name )
   : KPrefsWidget(prefs, parent, name )
 {
   mExternalAppsMap.insert(ExternalAppHandler::EMAIL, i18n("Email"));
   mExternalAppsMap.insert(ExternalAppHandler::PHONE, i18n("Phone"));
   mExternalAppsMap.insert(ExternalAppHandler::SMS, i18n("SMS"));
   mExternalAppsMap.insert(ExternalAppHandler::FAX, i18n("Fax"));
   mExternalAppsMap.insert(ExternalAppHandler::PAGER, i18n("Pager"));
   mExternalAppsMap.insert(ExternalAppHandler::SIP, i18n("SIP"));
 
 
   QVBoxLayout *topLayout = new QVBoxLayout( this, 0,
                                             KDialog::spacingHint() );
 
   tabWidget = new QTabWidget( this );
   topLayout->addWidget( tabWidget );
 
 
   setupLocaleTab();
   setupLocaleDateTab();
   setupTimeZoneTab();
   setupExternalAppTab();
   setupStoreTab();
   setupBackupTab();
 }
 void KDEPIMConfigWidget::showTimeZoneTab()
 {
     tabWidget->setCurrentPage ( 3 ) ;
 }
 void KDEPIMConfigWidget::setupBackupTab()
 {
     QVBox *colorPage = new QVBox( this );
     tabWidget->addTab( colorPage, i18n( "Backup" ) );
     QWidget* topFrame = new QWidget( colorPage ); 
     QVBoxLayout *topLayout = new QVBoxLayout(topFrame);
     KPrefsWidBool *sb = addWidBool(i18n("Backup enabled"),
                       &(KPimGlobalPrefs::instance()->mBackupEnabled),topFrame);
     topLayout->addWidget((QWidget*)sb->checkBox());
     QWidget* bupFrame = new QWidget( topFrame ); 
     topLayout->addWidget((bupFrame));
     QObject::connect ( sb->checkBox(), SIGNAL (toggled ( bool ) ), bupFrame, SLOT ( setEnabled( bool ) ) );
     QVBoxLayout *bupLayout = new QVBoxLayout(bupFrame);
     sb = addWidBool(i18n("Use standard backup dir"),
                       &(KPimGlobalPrefs::instance()->mBackupUseDefaultDir),bupFrame);
     bupLayout->addWidget((QWidget*)sb->checkBox());
     mBackupUrl = new KURLRequester( bupFrame );
+    mBackupUrl->setPathIsDir();
     mBackupUrl->setURL( KGlobalSettings::backupDataDir() );
     QObject::connect ( sb->checkBox(), SIGNAL (toggled ( bool ) ), mBackupUrl ,SLOT ( setDisabled( bool ) ) );
     bupLayout->addWidget( mBackupUrl );
 
     mBackupUrl->setEnabled( !KPimGlobalPrefs::instance()->mBackupUseDefaultDir );
     bupFrame->setEnabled( KPimGlobalPrefs::instance()->mBackupEnabled );
     QHBox *dummy = new QHBox(bupFrame);
     new QLabel(i18n("Number of Backups:"),dummy);
     mBackupNumbersSpin = new QSpinBox(1,21,1,dummy);
     new QLabel(i18n(" "),dummy);
     bupLayout->addWidget( dummy );
 
     dummy = new QHBox(bupFrame);
     new QLabel(i18n("Make backup every "),dummy);
     mBackupDayCountSpin = new QSpinBox(1,28,1,dummy);
     new QLabel(i18n(" days"),dummy);
     new QLabel(i18n(" "),dummy);
     bupLayout->addWidget( dummy ); 
     QString localKdeDir;
     localKdeDir = readEnvPath("LOCALMICROKDEHOME");
     if ( ! localKdeDir.isEmpty() ) {
         sb->checkBox()->setEnabled( false );
         sb->checkBox()->setChecked( true );
         mBackupUrl->setEnabled( false );
         KPimGlobalPrefs::instance()->mBackupUseDefaultDir = true;
     }
 
 }
 void KDEPIMConfigWidget::setupStoreTab()
 {
     QVBox *colorPage = new QVBox( this );
     tabWidget->addTab( colorPage, i18n( "Colors" ) );
     QWidget* cw = new QWidget( colorPage ); 
     KPrefsWidColor *holidayColor =
       addWidColor(i18n("Alternating background of list views"),
                   &(KPimGlobalPrefs::instance()->mAlternateColor),cw);
     QHBoxLayout *topLayout = new QHBoxLayout(cw);
     topLayout->addWidget(holidayColor->label());
     topLayout->addWidget( (QWidget* )holidayColor->button());
 
 
     QVBox *storePage = new QVBox( this ); 
     if (  QApplication::desktop()->height() > 240 )
     new QLabel( i18n("Your current storage dir is:\n%1\nYour mail is stored in:\n(storagedir)/apps/kopiemail/localmail").arg(KGlobal::dirs()->localkdedir()), storePage  );
     new QLabel( i18n("<b>New data storage dir:</b>"), storePage );
     mStoreUrl = new KURLRequester( storePage );
+    mStoreUrl->setPathIsDir();
     mStoreUrl->setURL( KGlobal::dirs()->localkdedir() );
 #ifdef DESKTOP_VERSION     
     QString confFile = qApp->applicationDirPath ()+ "/.microkdehome" ;
     QFileInfo fi ( confFile );
     if ( fi.exists() ) {
         KConfig cfg (   confFile );
         cfg.setGroup("Global");
         QString localKdeDir = cfg.readEntry( "MICROKDEHOME", "x_x_x" );
         if ( localKdeDir != "x_x_x" ) {
             mStoreUrl->setURL( localKdeDir );
             qDebug("Reading config from %s ", confFile.latin1());
         }
     }
                
 #endif
     new QLabel( i18n("New dirs are created automatically"), storePage  );
     QHBox *bb = new QHBox( storePage );
     QPushButton * pb;
     if ( QApplication::desktop()->width() < 640 )
         pb = new QPushButton ( i18n("Save"), bb  );
     else
         pb = new QPushButton ( i18n("Save settings"), bb  );
     connect(pb, SIGNAL( clicked() ), this, SLOT ( saveStoreSettings() ) );
     pb = new QPushButton ( i18n("Save standard"), bb  );
     connect(pb, SIGNAL( clicked() ), this, SLOT ( setStandardStore() ) );
 #ifdef DESKTOP_VERSION
     pb = new QPushButton ( i18n("Save using LOCAL storage"), bb  );
     connect(pb, SIGNAL( clicked() ), this, SLOT ( setLocalStore() ) );
 #endif
     new QLabel( i18n("<b>New settings are used\nafter a restart</b>"), storePage );
     new QLabel( i18n("Settings are stored in\n%1").arg(QDir::homeDirPath() + "/.microkdehome" ), storePage  );
     tabWidget->addTab( storePage, i18n( "Data storage path" ) );
 }
 void KDEPIMConfigWidget::setLocalStore()
 {
     mStoreUrl->setURL(  "LOCAL:kdepimpi"  );
     saveStoreSettings();
     QString message = i18n("'LOCAL' mode makes is possible to run\nKA/Pi and KO/Pi from a USB memory stick.\nIn LOCAL mode the data is stored\nin a path relative to the executable.\nNote, that in LOCAL mode only addressbook\nresource files in\n <path of the executable>/<dirname after LOCAL:>/apps/kabc/*.vcf\n are supported.\nIf you use the standard addressbook settings\nyou do not have to reconfigure any path,\njust restart the application and import\nyour addressbook and calendar data.");
     KMessageBox::information( this, message);
 }
 void KDEPIMConfigWidget::setStandardStore()
 {
     mStoreUrl->setURL(  QDir::homeDirPath() + "/kdepim"  );
     saveStoreSettings();
 }
 void KDEPIMConfigWidget::saveStoreSettings()
 {
     if ( !mStoreUrl->url().isEmpty() ) {
         QString path = QDir::homeDirPath();
         QString url = mStoreUrl->url();
 #ifdef DESKTOP_VERSION
         if ( url.startsWith( "LOCAL:" ) ) {
             path = qApp->applicationDirPath () ;
         }
 #endif
         KConfig cfg (   path + "/.microkdehome" );
         cfg.setGroup("Global");
         cfg.writeEntry( "MICROKDEHOME", url ); 
         qDebug("cfg.writeEntry( MICROKDEHOME, %s  ", url.latin1());
         cfg.sync();
     } else {
         mStoreUrl->setURL(  QDir::homeDirPath() + "/kdepim"  );
         saveStoreSettings();
     }
 }
 void KDEPIMConfigWidget::setupExternalAppTab()
 {
   QWidget *externalAppsPage = new QWidget( this );
   QVBoxLayout* layout = new QVBoxLayout( externalAppsPage, KDialog::marginHintSmall(),
                                             KDialog::spacingHintSmall() );
 
   mExternalApps = new QComboBox( externalAppsPage );
 
   QMap<ExternalAppHandler::Types, QString>::Iterator it;
   for( it = mExternalAppsMap.begin(); it != mExternalAppsMap.end(); ++it )
     mExternalApps->insertItem( it.data(), it.key() );
 
   layout->addWidget( mExternalApps );
 
   connect( mExternalApps, SIGNAL( activated( int ) ),
            this, SLOT (externalapp_changed( int ) ) );
 
 
   mExternalAppGroupBox = new QGroupBox( 0, Qt::Vertical, i18n( "Used Mail Client" ), externalAppsPage );
   QGridLayout *boxLayout = new QGridLayout( mExternalAppGroupBox->layout(), 4, 2,    -1, "gridlayout" );
   mExternalAppGroupBox->layout()->setMargin(4);
 
   mClient = new QComboBox( mExternalAppGroupBox );
   boxLayout->addMultiCellWidget( mClient, 0, 0, 0, 1 );
 
   connect( mClient, SIGNAL( activated( int ) ),
            this, SLOT (client_changed( int ) ) );
 
   QLabel* lab = new QLabel( i18n("Channel:"), mExternalAppGroupBox);
   boxLayout->addWidget( lab, 1, 0 );
   mChannel = new QLineEdit(mExternalAppGroupBox);
   mChannel->setReadOnly(true);
   boxLayout->addMultiCellWidget( mChannel, 2 , 2, 0, 1 );
 
   lab = new QLabel( i18n("Message:"), mExternalAppGroupBox);
   boxLayout->addWidget( lab, 3, 0 );
   mMessage = new QLineEdit(mExternalAppGroupBox);
   mMessage->setReadOnly(true);
   boxLayout->addWidget( mMessage , 4, 0);
 
   lab = new QLabel( i18n("Parameters:"), mExternalAppGroupBox);
   boxLayout->addWidget( lab, 3, 1 );
   mParameters = new QLineEdit(mExternalAppGroupBox);
   mParameters->setReadOnly(true);
   boxLayout->addWidget( mParameters, 4, 1 );
       lab = new QLabel( i18n("HINT: Delimiter=; Name=%1,Email=%2"), mExternalAppGroupBox);
       boxLayout->addMultiCellWidget( lab, 5, 5, 0, 1 );
 
 
   if (  QApplication::desktop()->height() > 240 ) {
       lab = new QLabel( i18n("extra Message:"), mExternalAppGroupBox);
       boxLayout->addWidget( lab, 6, 0 );
       mMessage2 = new QLineEdit(mExternalAppGroupBox);
       mMessage2->setReadOnly(true);
       boxLayout->addWidget( mMessage2 , 7, 0);
 
       lab = new QLabel( i18n("extra Parameters:"), mExternalAppGroupBox);
       boxLayout->addWidget( lab, 6, 1 );
       mParameters2 = new QLineEdit(mExternalAppGroupBox);
       mParameters2->setReadOnly(true);
       boxLayout->addWidget( mParameters2, 7, 1 );
 
       lab = new QLabel( i18n("HINT: Emails=%1,Attachments=%2"), mExternalAppGroupBox);
diff --git a/microkde/kfiledialog.cpp b/microkde/kfiledialog.cpp
index 6be1580..c64f325 100644
--- a/microkde/kfiledialog.cpp
+++ b/microkde/kfiledialog.cpp
@@ -1,79 +1,88 @@
 #include <kfiledialog.h>
 #include <qdialog.h>
 #include <qlayout.h>
 #include <qdir.h>
 #include <qfileinfo.h>
 #include <qapplication.h>
 
 #ifndef DESKTOP_VERSION
 //US orig#include <ofileselector.h>
 #include <ofileselector_p.h>
 QString KFileDialog::getSaveFileName( const QString & fn,
                                              const QString & cap , QWidget * par )
 {
     QString retfile = "";
     QDialog dia ( par, "input-dialog", true ); 
     QVBoxLayout lay( &dia );
     lay.setMargin(7); 
     lay.setSpacing(7); 
     QString file = fn;
     if ( file.isEmpty() )
         file = QDir::homeDirPath()+"/*";
     QFileInfo fi ( file );
     OFileSelector o ( &dia,OFileSelector::FileSelector, OFileSelector::Save, fi.dirPath(true), fi.fileName() );
     QObject::connect (  &o, SIGNAL( ok() ), &dia, SLOT ( accept () ) );
     lay.addWidget( &o);
     // o.setNewVisible( true );
     // o.setNameVisible( true );
     dia.showMaximized();
     if ( cap.isEmpty() )
         dia.setCaption( file );
     else
         dia.setCaption( cap );
     int res = dia.exec();
     if ( res )
         retfile = o.selectedName();
     return retfile;
 }
 
 QString KFileDialog::getOpenFileName( const QString & fn,
                                              const QString & cap, QWidget * par )
 {
    QString retfile = "";
     QDialog dia ( par, "input-dialog", true ); 
     // QLineEdit lab ( &dia ); 
     QVBoxLayout lay( &dia );
     lay.setMargin(7); 
     lay.setSpacing(7);
     QString file = fn;
     if ( file.isEmpty() )
         file = QDir::homeDirPath()+"/*";;
     QFileInfo fi ( file );
     OFileSelector o ( &dia,OFileSelector::FileSelector, OFileSelector::Open, fi.dirPath(true), fi.fileName() );
     QObject::connect (  &o, SIGNAL( ok() ), &dia, SLOT ( accept () ) );
     lay.addWidget( &o);
     dia.showMaximized();
     dia.setCaption( cap );
     int res = dia.exec();
     if ( res )
         retfile = o.selectedName();
     return retfile;
 }
-
+QString KFileDialog::getExistingDirectory( const QString & fn,
+                                             const QString & cap, QWidget * par )
+{
+    return KFileDialog::getSaveFileName( fn, cap, pr );
+}
 #else
 
 #include <qfiledialog.h> 
 
 QString KFileDialog::getSaveFileName( const QString & fn,
                                              const QString & cap , QWidget * par )
 {
     return QFileDialog::getSaveFileName( fn, QString::null, par, "openfile", cap );
 }
 QString KFileDialog::getOpenFileName( const QString & fn,
                                              const QString & cap, QWidget * par )
 {
 
     return QFileDialog::getOpenFileName( fn, QString::null, par, "openfile", cap );
 }
+QString KFileDialog::getExistingDirectory( const QString & fn,
+                                             const QString & cap, QWidget * par )
+{
+    return QFileDialog::getExistingDirectory( fn, par, "exidtingdir", cap );
+}
 #endif
 
diff --git a/microkde/kfiledialog.h b/microkde/kfiledialog.h
index 0825872..90709cd 100644
--- a/microkde/kfiledialog.h
+++ b/microkde/kfiledialog.h
@@ -1,20 +1,22 @@
 #ifndef MICROKDE_KFILEDIALOG_H
 #define MICROKDE_KFILEDIALOG_H
 
 #include <qstring.h>
 #include <qwidget.h>
 
 class KFileDialog
 {
   public:
   
     static QString getSaveFileName( const QString &,
                                     const QString &, QWidget * );
         
 
     static QString getOpenFileName( const QString &,
                                     const QString &, QWidget * );
    
+    static QString getExistingDirectory( const QString &,
+                                    const QString &, QWidget * );
 };
 
 #endif
diff --git a/microkde/kio/kfile/kurlrequester.cpp b/microkde/kio/kfile/kurlrequester.cpp
index 991c8be..ca94570 100644
--- a/microkde/kio/kfile/kurlrequester.cpp
+++ b/microkde/kio/kfile/kurlrequester.cpp
@@ -86,317 +86,320 @@ private:
 *************************************************************************
 */
 
 class KURLRequester::KURLRequesterPrivate
 {
 public:
     KURLRequesterPrivate() {
 	edit = 0L;
 //US	combo = 0L;
 //US        fileDialogMode = KFile::File | KFile::ExistingOnly | KFile::LocalOnly;
     }
 
     void setText( const QString& text ) {
 /*US    
 	if ( combo )
 	{
 	    if (combo->editable())
 	    {
                combo->setEditText( text );
             }
             else
             {
                combo->insertItem( text );
                combo->setCurrentItem( combo->count()-1 );
             }
         }
 	else
 */  
 	{
 	    edit->setText( text );
 	}
     }
 
     void connectSignals( QObject *receiver ) {
 	QObject *sender;
 /*US	if ( combo )
 	    sender = combo;
 	else
 */  
 	    sender = edit;
 
 	connect( sender, SIGNAL( textChanged( const QString& )),
 		 receiver, SIGNAL( textChanged( const QString& )));
 	connect( sender, SIGNAL( returnPressed() ),
 		 receiver, SIGNAL( returnPressed() ));
 //US	connect( sender, SIGNAL( returnPressed( const QString& ) ),
 //US		 receiver, SIGNAL( returnPressed( const QString& ) ));
     }
 /*US
     void setCompletionObject( KCompletion *comp ) {
 	if ( combo )
 	    combo->setCompletionObject( comp );
 	else
 	    edit->setCompletionObject( comp );
     }
 */	
     /**
      * replaces ~user or $FOO, if necessary
      */
     QString url() {
         QString txt = /*US combo ? combo->currentText() : */ edit->text();
 /*US        KURLCompletion *comp;
         if ( combo )
             comp = dynamic_cast<KURLCompletion*>(combo->completionObject());
         else
             comp = dynamic_cast<KURLCompletion*>(edit->completionObject());
 
         if ( comp )
             return comp->replacedPath( txt );
         else
 */        
             return txt;
     }
 
     KLineEdit *edit;
 //US    KComboBox *combo;
     int fileDialogMode;
     QString fileDialogFilter;
 };
 
 
 /*US
 KURLRequester::KURLRequester( QWidget *editWidget, QWidget *parent,
 			      const char *name )
   : QHBox( parent, name )
 {
     d = new KURLRequesterPrivate;
 
     // must have this as parent
     editWidget->reparent( this, 0, QPoint(0,0) );
 //US    d->edit = dynamic_cast<KLineEdit*>( editWidget );
     d->edit = (KLineEdit*)( editWidget );
 //US    d->combo = dynamic_cast<KComboBox*>( editWidget );
 
     init();
 }
 */
 
 KURLRequester::KURLRequester( QWidget *parent, const char *name )
   : QHBox( parent, name )
 {
     d = new KURLRequesterPrivate;
     init();
 }
 
 
 KURLRequester::KURLRequester( const QString& url, QWidget *parent,
 			      const char *name )
   : QHBox( parent, name )
 {
     d = new KURLRequesterPrivate;
     init();
     setURL( url );
 }
 
 
 KURLRequester::~KURLRequester()
 {
 //US    delete myCompletion;
     delete myFileDialog;
     delete d;
 }
 
 
 void KURLRequester::init()
 {
     myFileDialog    = 0L;
     myShowLocalProt = false;
-
+    mPathIsDir = false;
     if (/*US !d->combo && */ !d->edit )
 	d->edit = new KLineEdit( this, "KURLRequester::KLineEdit" );
 
     myButton = new KURLDragPushButton( this, "kfile button");
     QIconSet iconSet = SmallIconSet("fileopen");
     QPixmap pixMap = iconSet.pixmap( QIconSet::Small, QIconSet::Normal );
     myButton->setIconSet( iconSet );
     myButton->setFixedSize( pixMap.width()+8, pixMap.height()+8 );
 //US    QToolTip::add(myButton, i18n("Open file dialog"));
 
     connect( myButton, SIGNAL( pressed() ), SLOT( slotUpdateURL() ));
 
     setSpacing( KDialog::spacingHint() );
 
     QWidget *widget = /*US d->combo ? (QWidget*) d->combo : */ (QWidget*) d->edit;
     setFocusProxy( widget );
 
     d->connectSignals( this );
     connect( myButton, SIGNAL( clicked() ), this, SLOT( slotOpenDialog() ));
 /*US
     myCompletion = new KURLCompletion();
     d->setCompletionObject( myCompletion );
 
     KAccel *accel = new KAccel( this );
     accel->insert( KStdAccel::Open, this, SLOT( slotOpenDialog() ));
     accel->readSettings();
 */    
 }
 
 
 void KURLRequester::setURL( const QString& url )
 {
     bool hasLocalPrefix = (url.startsWith("file:"));
 
     if ( !myShowLocalProt && hasLocalPrefix )
 	d->setText( url.mid( 5, url.length()-5 ));
     else
 	d->setText( url );
 }
 
 void KURLRequester::setCaption( const QString& caption )
 {
 //US	fileDialog()->setCaption( caption );
 //US	QWidget::setCaption( caption );
 }
 
 QString KURLRequester::url() const
 {
     return d->url();
 }
 
 
 void KURLRequester::slotOpenDialog()
 {
     emit openFileDialog( this );
 
 //US use our special KFIleDialog instead
     KURL u( url() );
     //QString fn = u.url();
     QString fn = d->edit->text();
+    if ( mPathIsDir ) 
+        fn =  KFileDialog::getExistingDirectory ( fn, "", this );
+    else
     fn =  KFileDialog::getSaveFileName( fn, "", this );
 
     if ( fn == "" )
         return;
    
 	  setURL( fn );
     emit urlSelected( d->url() );
 /*US    
     KFileDialog *dlg = fileDialog();
     if ( !d->url().isEmpty() ) {
         KURL u( url() );
         // If we won't be able to list it (e.g. http), then don't try :)
         if ( KProtocolInfo::supportsListing( u.protocol() ) )
 	    dlg->setSelection( u.url() );
     }
 
     if ( dlg->exec() == QDialog::Accepted )
     {
 	setURL( dlg->selectedURL().prettyURL() );
         emit urlSelected( d->url() );
     }
 */
         
 }
 
 void KURLRequester::setMode(unsigned int mode)
 {
 /*US
     Q_ASSERT( (mode & KFile::Files) == 0 );
     d->fileDialogMode = mode;
     if ( (mode & KFile::Directory) && !(mode & KFile::File) )
         myCompletion->setMode( KURLCompletion::DirCompletion );
     
     if (myFileDialog)
        myFileDialog->setMode( d->fileDialogMode );
 */
 }
 
 void KURLRequester::setFilter(const QString &filter)
 {
 /*US
     d->fileDialogFilter = filter;
     if (myFileDialog)
        myFileDialog->setFilter( d->fileDialogFilter );
 */
 }
 
 KFileDialog * KURLRequester::fileDialog() const
 {
 /*US
     if ( !myFileDialog ) {
 	QWidget *p = parentWidget();
 	myFileDialog = new KFileDialog( QString::null, QString::null, p,
 					"file dialog", true );
 	
 	myFileDialog->setMode( d->fileDialogMode );
         myFileDialog->setFilter( d->fileDialogFilter );
     }
 
     return myFileDialog;
 */    
   return 0;
 }
 
 
 void KURLRequester::setShowLocalProtocol( bool b )
 {
     if ( myShowLocalProt == b )
 	return;
 
     myShowLocalProt = b;
     setURL( url() );
 }
 
 void KURLRequester::clear()
 {
     d->setText( QString::null );
 }
 
 KLineEdit * KURLRequester::lineEdit() const
 {
     return d->edit;
 }
 /*US
 KComboBox * KURLRequester::comboBox() const
 {
     return d->combo;
 }
 */
 void KURLRequester::slotUpdateURL()
 {
     // bin compat, myButton is declared as QPushButton
 //US    KURL u( QDir::currentDirPath() + '/', url() );
     KURL u( url() );
     (static_cast<KURLDragPushButton *>( myButton))->setURL( u );
 }
 
 QPushButton * KURLRequester::button() const
 {
     return myButton;
 }
 /*US
 KEditListBox::CustomEditor KURLRequester::customEditor()
 {
     setSizePolicy(QSizePolicy( QSizePolicy::Preferred,
                                QSizePolicy::Fixed));
 
     KLineEdit *edit = d->edit;
     if ( !edit && d->combo )
         edit = dynamic_cast<KLineEdit*>( d->combo->lineEdit() );
 
 #ifndef NDEBUG
     if ( !edit )
         kdWarning() << "KURLRequester's lineedit is not a KLineEdit!??\n";
 #endif
 
     KEditListBox::CustomEditor editor( this, edit );
     return editor;
 }
 */
 void KURLRequester::virtual_hook( int, void* )
 { /*BASE::virtual_hook( id, data );*/ }
 
 /*US
 KURLComboRequester::KURLComboRequester( QWidget *parent,
 			      const char *name )
   : KURLRequester( new KComboBox(false), parent, name)
 {
diff --git a/microkde/kio/kfile/kurlrequester.h b/microkde/kio/kfile/kurlrequester.h
index 3253dd5..faa3326 100644
--- a/microkde/kio/kfile/kurlrequester.h
+++ b/microkde/kio/kfile/kurlrequester.h
@@ -1,269 +1,271 @@
 /* This file is part of the KDE libraries
     Copyright (C) 1999,2000,2001 Carsten Pfeiffer <pfeiffer@kde.org>
 
     library is free software; you can redistribute it and/or
     modify it under the terms of the GNU Library General Public
     License version 2, as published by the Free Software Foundation.
 
     This library is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
     Library General Public License for more details.
 
     You should have received a copy of the GNU Library General Public License
     along with this library; see the file COPYING.LIB.  If not, write to
     the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
     Boston, MA 02111-1307, USA.
 */
 
 
 #ifndef KURLREQUESTER_H
 #define KURLREQUESTER_H
 
 #include <qhbox.h>
 
 #include <keditlistbox.h>
 //US #include <kfile.h>
 //US #include <kpushbutton.h>
 #include <kurl.h>
 
 //US class KComboBox;
 
 class KFileDialog;
 class KLineEdit;
 //US class KURLCompletion;
 class KURLDragPushButton;
 
 class QPushButton;
 class QString;
 class QTimer;
 
 /**
  * This class is a widget showing a lineedit and a button, which invokes a
  * filedialog. File name completion is available in the lineedit.
  *
  * The defaults for the filedialog are to ask for one existing local file, i.e.
  * KFileDialog::setMode( KFile::File | KFile::ExistingOnly | KFile::LocalOnly )
  * The default filter is "*", i.e. show all files, and the start directory is
  * the current working directory, or the last directory where a file has been
  * selected.
  *
  * You can change this behavior by using @ref setMode() or @ref setFilter().
  *
  * @short A widget to request a filename/url from the user
  * @author Carsten Pfeiffer <pfeiffer@kde.org>
  */
 class KURLRequester : public QHBox
 {
     Q_OBJECT
     Q_PROPERTY( QString url READ url WRITE setURL )
 
 public:
     /**
      * Constructs a KURLRequester widget.
      */
     KURLRequester( QWidget *parent=0, const char *name=0 );
 
     /**
      * Constructs a KURLRequester widget with the initial URL @p url.
      */
     KURLRequester( const QString& url, QWidget *parent=0, const char *name=0 );
 
     /**
      * Special constructor, which creates a KURLRequester widget with a custom
      * edit-widget. The edit-widget can be either a KComboBox or a KLineEdit
      * (or inherited thereof). Note: for geometry management reasons, the
      * edit-widget is reparented to have the KURLRequester as parent.
      * @param modal specifies whether the filedialog should be opened as modal
      * or not.
      */
 //US    KURLRequester( QWidget *editWidget, QWidget *parent, const char *name=0 );
     /**
      * Destructs the KURLRequester.
      */
     ~KURLRequester();
 
     /**
      * @returns the current url in the lineedit. May be malformed, if the user
      * entered something weird. ~user or environment variables are substituted
      * for local files.
      */
     QString url() const;
 
     /**
      * Enables/disables showing file:/ in the lineedit, when a local file has
      * been selected in the filedialog or was set via @ref setURL().
      * Default is false, not showing file:/
      * @see #showLocalProtocol
      */
     void setShowLocalProtocol( bool b );
 
     /**
      * Sets the mode of the file dialog.
      * Note: you can only select one file with the filedialog,
      * so KFile::Files doesn't make much sense.
      * @see KFileDialog::setMode()
      */
     void setMode( unsigned int m );
+    void setPathIsDir( ) {mPathIsDir  = true;}
 
     /**
      * Sets the filter for the file dialog.
      * @see KFileDialog::setFilter()
      */
     void setFilter( const QString& filter );
 
     /**
      * @returns whether local files will be prefixed with file:/ in the
      * lineedit
      * @see #setShowLocalProtocol
      */
     bool showLocalProtocol() const { return myShowLocalProt; }
 
     /**
      * @returns a pointer to the filedialog
      * You can use this to customize the dialog, e.g. to specify a filter.
      * Never returns 0L.
      */
     virtual KFileDialog * fileDialog() const;
 
     /**
      * @returns a pointer to the lineedit, either the default one, or the
      * special one, if you used the special constructor.
      *
      * It is provided so that you can e.g. set an own completion object
      * (e.g. @ref KShellCompletion) into it.
      */
     KLineEdit * lineEdit() const;
 
     /**
      * @returns a pointer to the combobox, in case you have set one using the
      * special constructor. Returns 0L otherwise.
      */
 //US    KComboBox * comboBox() const;
 
     /**
      * @returns a pointer to the pushbutton. It is provided so that you can
      * specify an own pixmap or a text, if you really need to.
      */
     QPushButton * button() const;
 
     /**
      * @returns the KURLCompletion object used in the lineedit/combobox.
      */
 //US    KURLCompletion *completionObject() const { return myCompletion; }
 
     /**
      * @returns an object, suitable for use with KEditListBox. It allows you
      * to put this KURLRequester into a KEditListBox.
      * Basically, do it like this:
      * <pre>
      * KURLRequester *req = new KURLRequester( someWidget );
      * [...]
      * KEditListBox *editListBox = new KEditListBox( i18n("Some Title"), req->customEditor(), someWidget );
      * </pre>
      * @since 3.1
      */
 //US    KEditListBox::CustomEditor customEditor();
 
 public slots:
     /**
      * Sets the url in the lineedit to @p url. Depending on the state of
      * @ref showLocalProtocol(), file:/ on local files will be shown or not.
      * @since 3.1
      */
     void setURL( const QString& url );
 
     /**
      * @reimp
      * Sets the caption of the file dialog.
      * @since 3.1
      */
     virtual void setCaption( const QString& caption );
 
     /**
      * Clears the lineedit/combobox.
      */
     void clear();
 
 signals:
     // forwards from LineEdit
     /**
      * Emitted when the text in the lineedit changes.
      * The parameter contains the contents of the lineedit.
      * @since 3.1
      */
     void textChanged( const QString& );
 
     /**
      * Emitted when return or enter was pressed in the lineedit.
      */
     void returnPressed();
 
     /**
      * Emitted when return or enter was pressed in the lineedit.
      * The parameter contains the contents of the lineedit.
      */
     void returnPressed( const QString& );
 
     /**
      * Emitted before the filedialog is going to open. Connect
      * to this signal to "configure" the filedialog, e.g. set the
      * filefilter, the mode, a preview-widget, etc. It's usually
      * not necessary to set a URL for the filedialog, as it will
      * get set properly from the editfield contents.
      *
      * If you use multiple KURLRequesters, you can connect all of them
      * to the same slot and use the given KURLRequester pointer to know
      * which one is going to open.
      */
     void openFileDialog( KURLRequester * );
 
     /**
      * Emitted when the user changed the URL via the file dialog.
      * The parameter contains the contents of the lineedit.
      */
     void urlSelected( const QString& );
 
 protected:
     void		init();
 
 //US    KURLCompletion *    myCompletion;
 
 
 private:
     KURLDragPushButton * myButton;
     bool 		myShowLocalProt;
     mutable KFileDialog * myFileDialog;
+    bool mPathIsDir;
 
 
 protected slots:
     /**
      * Called when the button is pressed to open the filedialog.
      * Also called when @ref KStdAccel::Open (default is Ctrl-O) is pressed.
      */
     void slotOpenDialog();
 
 private slots:
     void slotUpdateURL();
 
 protected:
     virtual void virtual_hook( int id, void* data );
 private:
     class KURLRequesterPrivate;
     KURLRequesterPrivate *d;
 };
 /*US
 class KURLComboRequester : public KURLRequester // For use in Qt Designer
 {
     Q_OBJECT
 public:    
 */
     /**
      * Constructs a KURLRequester widget with a combobox.
      */
 /*US     
     KURLComboRequester( QWidget *parent=0, const char *name=0 );
 };
 */
 
 #endif // KURLREQUESTER_H